summaryrefslogtreecommitdiffstats
path: root/recipes-networking/openvswitch
Commit message (Collapse)AuthorAgeFilesLines
...
* openvswitch: switch to depending on python3Mark Asselstine2017-06-214-18/+132
| | | | | | | | | | | | | | | | | | | | | | | | As far as I can tell openvswitch has been updated to work with python3 as well as with python(2). Switch to depend on python3 and use python3 for associated scripts. For the most part openvswitch will bind at runtime to either py2 or py3 regardless of these changes, with these changes we just do a better job of setting up the dependencies to facilitate py3 bindings. The openvswitch autotests results are mostly identical before and after this switch (failures move from python3 to python(2) test cases as expected, with some exceptions see below). When running the autotests/ptest with python(2) vs python3 we see a slightly higher failure rate (334 failures vs. 284 failures). I do not believe this higher fail rate reflects actual errors in the runtime, rather the tests are not adapted to python3. At any rate like the rest of openvswitch it is fairly straightforward to hack the logic for autotests to be run using py2 as long as it is available in the image, so these changes don't prevent falling back to py2 for autotests. This should facilitate any debugging we need to do based on us switching to favor py3. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: add missing dependencies required for ptestMark Asselstine2017-06-211-1/+1
| | | | | | | | | | On a minimally provisioned rootfs the tests are currently getting 'stuck' after running for a few minutes because 'find' and 'which' are not being found. Add these to the ptest package RDEPENDS to ensure they are present in the rootfs. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: Fix CVE-2017-9263Fan Xin2017-06-132-0/+30
| | | | | | | Backport patch file to fix CVE-2017-9263 Signed-off-by: Fan Xin <fan.xin@jp.fujitsu.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: uprev to the recently released v2.7.0Mark Asselstine2017-03-295-96/+114
| | | | | | | | | | | | | | | This version of OVS was released on Feb. 21. Bringing our recipe up to date with the latest release ensure we have all the latest CVE fixes as well as any new functionality that folks might be looking for. Additionally we are better situated to support up to date releases of DPDK (v16.11 in this case). No surprises with the uprev, it passes all usecase tests (meta-overc) and ptest results are much the same as the results we had in v2.6.1. While completing the uprev I took the opportunity to do some cleanup of patches that were no longer used or required. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: Fix build with musl libcKhem Raj2017-03-213-9/+80
| | | | | Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: add missing depends on coreutils-nativeMark Asselstine2017-03-131-1/+1
| | | | | | | | | | | | I was getting the following error when building the latest master: ../git/build-aux/calculate-schema-cksum: cksum: not found ../git/build-aux/calculate-schema-cksum: cksum: not found Adding coreutils-native which supplies 'cksum' resolved this. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: fix build host contaminationMark Asselstine2017-01-143-5/+59
| | | | | | | | | | | | | | | | | | | | | | There is only a single PYTHON variable for configure and yet python is used for the build as well as scripts installed on the target. If we set a path in PYTHON as we had we end up using this same path during the build and since it isn't to the sysroot we end up with host contamination (as demonstrated by python failing to import 'six' on build hosts without python-six installed. The best approach is to set PYTHON to "python" when calling configure, ie. without a path. This will use 'python' from the path during build time and by ensuring all the installed scripts use '/usr/bin/env' we can ensure python will be found on the target when the scripts are run. Since 'six' is used as part of the build we have to ensure it is -native'ly buildable and we set all the required build and runtime dependencies. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: uprev to 2.6.1Mark Asselstine2017-01-125-199/+17
| | | | | | | | | | | | | | | Pick up the latest features, including compatability with the latest DPDK as well as bug fixes. The patches for TARGET_PYTHON and TARGET_PERL can be dropped as configure now lets us pass these in the env (which we set). The systemd service files have been shuffled some upstream and we make adjustments in the recipe to accomodate these. The sysvinit scripts remain functional as they are. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* Revert "openvswitch: update licence checksum"Bruce Ashfield2017-01-111-1/+1
| | | | This reverts commit 67185ef0f8e1ebedd080ddaeb18d1e56f5034d45.
* openvswitch: update licence checksumMark Asselstine2017-01-041-1/+1
| | | | | | | | | | Upstream commit a489b16854b5 [conntrack: New userspace connection tracker.] classified new files under existing licenses in COPYING, resulting in no change to the overall licenses but requires a new checksum. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: add missing python modules to execute ovs-test programJagadeesh Krishnanjanappa2016-08-161-2/+5
| | | | | | | | | | | | | | | | | | | | | | | ovs-test program requires python-twisted and ovstest python modules to execute successfully. The changes fix below errors: -- snip -- root@qemux86:~# ovs-test Traceback (most recent call last): File "/usr/bin/ovs-test", line 31, in <module> import twisted ImportError: No module named twisted root@qemux86:~# ovs-test Traceback (most recent call last): File "/usr/bin/ovs-test", line 33, in <module> import ovstest.args as args ImportError: No module named ovstest.args root@qemux86:~# -- snip -- Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: Fix rootfs creation errorsDai Caiyun2016-05-161-0/+1
| | | | | | | | error: file /var/run from install of openvswitch-2.1.3-r0.x86_64 conflicts with file from package base-files-3.0.14-r89.ubinux_x86_64 Signed-off-by: Dai Caiyun <daicy.fnst@cn.fujitsu.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: ptest: Fix python pathHe Zhe2016-04-192-0/+31
| | | | | | | Set PYTHON to TARGET_PYTHON for running on target Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: Fix ptest for v2.5He Zhe2016-04-052-19/+63
| | | | | | | | | | | - Copy certain files from srcdir since it has been different from build directory. - Copy more necessary files for new added test cases. - Modify config files for running on target. - Add necessary RDEPENDS Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: Uprev to latest version 2.5.0He Zhe2016-03-312-7/+7
| | | | | | | Uprev to git rev bb429e09f7783f1ba23ac0682ed9edf424f0cfbb (based on 2.5.0) Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: enable systemd supportMark Asselstine2015-12-151-2/+14
| | | | | | | | | | | | | | Make the necessary updates to get openvswitch to be compatible with systemd. Up to now if you built a systemd supported image openvswitch was using the systemd sysvinit wrappers, by making these changes we now support systemd natively. Note that there is no equivalent systemd support for openvswitch-testcontroller. Following the lead of upstream this is not something that should be run by the init system. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: rename openvswitch-controllerMark Asselstine2015-12-153-31/+31
| | | | | | | | | | | | | | | | | | | | | As of version 2.4.0 openvswitch-controller has been renamed to openvswitch-testcontroller. This was documented in the upstream 'NEWS': - test-controller has been renamed ovs-testcontroller at request of users who find it useful for testing basic OpenFlow setups. It is still not a necessary or desirable part of most Open vSwitch deployments. Our initscripts and such have continued to reference the old name despite the application name name changing and so openvswitch-controller packaging has been broken for some time now. We rename the openvswitch-controller package to reflect the upstream name change and apply this name change throughout. We also drop the RDEPENDS as the upstream comments also indicate that this package is not needed for a normal openvswitch deployment. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: drop version 1.10.0 and 2.1.3Mark Asselstine2015-12-152-45/+0
| | | | | | | | | | | There are some changes that we need to make in the .inc file to properly support more recent releases of openvswitch. These changes are not compatible with these older versions of openvswitch, so rather than make accommodations in the .inc file to continue to support this version we will simply drop them. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: Uprev to latest stable version 2.4.0Jianchuan Wang2015-11-033-24/+5
| | | | | | | | | Uprev to git rev bb429e09f7783f1ba23ac0682ed9edf424f0cfbb (based on 2.4.0) - Remove non_reproducible_builds_cleanup.patch since it have been in the version 2.4.0. Signed-off-by: Jianchuan Wang <jianchuan.wang@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvsitch: set CONFIGUREOPT_DEPTRACK to emptyRoy Li2015-08-261-0/+1
| | | | | | | | | | | | | | | | compilation failed since the needed dirs maybe not created when make ".in" target, fix it by creating the needed dirs before, but mainstream thinks the needed dirs should be created when do configuration. at last, find CONFIGUREOPT_DEPTRACK disable the creation, so empty it http://openvswitch.org/pipermail/dev/2015-August/059189.html set CONFIGUREOPT_DEPTRACK to empty, is lower effective, but harmless, and can fix the parallel building issue; see oe-core 970e0ae6108[autotools: Disable dependency tracking Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: add bash rdependsBruce Ashfield2015-02-221-1/+2
| | | | | | | | Fix the following QA warning: WARNING: QA Issue: openvswitch requires /bin/bash, but no providers in its RDEPENDS [file-rdeps] Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: don't pass kernel source or build artifactsBruce Ashfield2015-02-201-1/+1
| | | | | | | | | | | Like the previous versions of OVS, we rely on the virtual/kernel provider to build the appropriate modules. Passing the --with-linux and --with-linux-source breaks builds when the split source/build/build-artifacts are not as expected (and modules are attempted to be built from the wrong directory). To fix this, we simply don't enable those options, and all is well. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* ovs: disable dpdk by defaultBruce Ashfield2015-02-201-1/+1
| | | | | | | The dpdk recipes are not commonly available, so we shouldn't have dpdk in the PACKAGECONFIG by default. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: restructure recipesAmy Fong2015-02-034-320/+151
| | | | | | | Add openvswitch.inc, removing common parts out of openvswitch*.bb Signed-off-by: Amy Fong <amy.fong@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* Package openvswitch gitAmy Fong2015-02-035-0/+268
| | | | | | | | This revision corresponds to git rev 1667bb34988358aaf1c92d0d21fad4b1c8698780 (based on 2.3.90) Signed-off-by: Amy Fong <amy.fong@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: uprev to latest stable update - v2.1.3Mark Asselstine2014-12-021-2/+2
| | | | | | | | v2.1.3 is listed upstream as "contains only bug fixes for the 2.1.2 release". The only update to the recipe is updated checksums. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: uprev to v2.1.2Bruce Ashfield2014-05-143-69/+57
| | | | | | | Updating to the latest OVS 2.x. Only minor patch refreshes required, and no regressions were found during sanity testing. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: add ptest supportRadu Patriu2014-04-013-2/+85
| | | | | | | Install openvswitch test suite and run it as ptest. Signed-off-by: Radu Patriu <radu.patriu@enea.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: add more target python substitutionsJim Somerville2014-02-052-0/+51
| | | | | | | | | The TARGET_PYTHON variable is used for script substitutions to ensure the scripts will be able to properly execute if the target system has a different path for the python. Signed-off-by: Jim Somerville <Jim.Somerville@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: add missing inheritMark Asselstine2013-12-181-1/+1
| | | | | | | | | | | openvswitch requires pkgconfig or you may see an error: configure.ac:53: error: Please install pkg-config. during configure. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: deal with missing RDEPENDS of libpcapMark Asselstine2013-11-192-1/+72
| | | | | | | | | | | | | | | Bitbake was properly detecting a dependency on libpcap but since it was not an explicit RDEPENDS the libpcap package was not being built in all cases which had the potential to break rootfs image building. The obvious solution was to add libpcap to the RDEPENDS but looking upstream it was found that they have removed the use of this library for all but FreeBSD since for other systems it is unused. So using the upstream patch here eliminates the dependency and in turn the issue described above. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: make postinst indentation consistentBruce Ashfield2013-11-131-25/+25
| | | | | | | right or wrong, we shouldn't have a mix of tabs or spaces, so in this cleanup, we'll make them all tabs. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* ovs: uprev to 2.0.0Bruce Ashfield2013-11-132-23/+127
| | | | | | | | | | | | | | We update to the latest 2.0 OVS, but we'll keep the existed (better tested) version around until this proves to be stable. As part of this update the openvswitch-add-target-perl-handling.patch has been refreshed, since one of the scripts it patched is no longer part of the package. Finally, we drop PR from the recipe as part of the larger move to PRSERVER based revision numbers. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: fix RDEPENDS issue for installers.Paul Barrette2013-10-261-1/+5
| | | | | | | | | | | Make sure openvswitch has all the runtime dependencies defined. Without e.g. sed, an installer may calculate dependencies and order packages based on the deps, which may install openvswitch before sed. This would result in an install failure, when the post install step calls ovs-pki, which uses sed. Signed-off-by: Paul Barrette <paul.barrette@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* ovs: add /run to main packageBruce Ashfield2013-08-151-0/+1
| | | | | | | | In a systemd based build, /var/run is translated to /run. Since ovs doesn't currently package this directory, it results in a QA error. Adding it to the main ovs package fixes the QA issue and provides the proper runtime support. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: Ensure pki directory creationMihai Prica2013-07-301-1/+5
| | | | | | | RPM doesn't guarantee the order in which postinstalls are ran. Added code to ensure the pki directory is initialized. Signed-off-by: Mihai Prica <mihai.prica@intel.com>
* openvswitch: Add coreutils runtime dependencyMihai Prica2013-07-301-2/+2
| | | | | | The install and nice programs from coreutils are required by openvswitch. Signed-off-by: Mihai Prica <mihai.prica@intel.com>
* openvswitch: add split between host and target python and perl pathsMark Asselstine2013-06-273-0/+216
| | | | | | | | | | | | | | | | Openvswitch is built with the assumption that the PYTHON and PERL variables are common between the host and target. This can result in improper paths used for script substitutions which in turn causes scripts which will fail to run on the target and the generated packages to have improper REQUIRES, making them impossible to install. These are usually not an issue since python and perl are found in the same location on the host and target, but there is no guarantee of this so the possibility of failure exists. By explicitly defining the location of the python and perl on the target we can avoid these assumptions and possibility of failure. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: remove 1.9 recipeBruce Ashfield2013-06-201-99/+0
| | | | | | | The OVS 1.10 integration has soaked for long enough to be stable, so we can remove the old 1.9 recipe. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: Checksum missmatch fixAnders Roxell2013-06-111-2/+2
| | | | | Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: uprev to 1.10 and documentation update.Paul Barrette2013-06-031-0/+102
| | | | | | | | | -Uprev to 1.10 -removed vswitch_test.sh -added openvswitch.txt. Signed-off-by: Paul Barrette <paul.barrette@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswitch: update to version 1.9.0dylanJoe Slater2013-04-281-3/+3
| | | | | | | | | Update recipe to version 1.9.0. Refer to docs/vswitch_test.sh for a sanity test. This package will not be functional unless the openvswitch kernel module is configured into the kernel. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* openvswtich: start openvswitch at the boot timeLei Yang2013-02-011-1/+1
| | | | | | | | | | | | | | | | | | | | When I define the bridge, I get below error root@intel_5500_server:~# ovs-vsctl add-br ovsbr0 Jan 25 17:34:07|00002|stream_unix|ERR|/tmp/stream-unix.1487.0: connection to /var/run/openvswitch/db.sock failed: No such file or directory ........ ........ This is because openvswitch damon isn't running,so we'd better start it at the boot time. The split-package ${PN}-switch ${PN}-controller provide us to start necessary daemon with update-rc.d so we add them to the RDEPENDS. Since openvswitch depends on openvswtich kernel module, so auto load the kernel module too. Signed-off-by: Lei Yang <lei.yang@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* Added openvswitch recipeDavid Nyström2012-12-076-0/+614
Signed-off-by: David Nyström <david.nystrom@enea.com> Reviewed-by: Bruce Ashfield <bruce.ashfield@windriver.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-05-26 17:04:14 +0000