| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This updates the fork to current 2018.09 release and apply following
changes on top:
62f2841dc4 pico-imx6ul: Add instructions for booting in Falcon mode
a803c01c03 pico-imx6ul: Add Falcon mode support
3e5f58a2a4 wandboard: README: Include the mx6qp variant in the list
28b8458749 imx: imx6ull: fix pinmux input_val for uart5 rx pin
1bc802f9cc pico-imx6ul: Remove CONFIG_FSL_USDHC from .h
cc97092f7c pico-imx6ul: Add new pico-hobbit config
11aaa94cd8 pico-imx6ul: Sync README with pico-imx7d
52723c960f pico-imx6ul: Improve default DFU settings
c90fa9c1a2 pico-imx6ul: Add bootmenu to choose the baseboard
2141bc7952 pico-imx6ul: Sync defconfig with new changes
9ff1d5305d pico-imx6ul: Update the README file
2b0e81461c pico-imx6ul: Add support for the 512MB module
e45ab0b309 pico-imx6ul: Add bmode support
ad3c1b13d8 pico-imx6ul: Add fastboot support
fa2c10bbac pico-imx6ul: Convert to SPL
b143e3f027 pico-imx6ul: Convert to distro config
a9c45f15b2 mx6sabre_common: Allow the videoargs to be passed to bootargs
b584b845b1 mx25pdk: Change root to use a single partition layout
146e490814 mx6sabre_common: Dynamically change the video output
a278950282 mx6sabresd: Enable video interfaces in bootargs
77cac8a16e mx6sabresd: Use LDO dtb file until LDO bypass support is added
be4d1c4100 mx6slevk: Use LDO dtb file until LDO bypass support is added
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
| |
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
|
|
|
|
|
| |
Add support for AK4458, AK5558, and AK4497.
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
|
|
|
|
|
|
| |
Channel mapping on HDMI was incorrect for 4 and 8 channels.
Create a PCM device so alsa-lib will remap in user space.
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
|
|
|
| |
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
|
|
|
|
|
| |
1e13b91af7 mx6sabre_common: Allow the videoargs to be passed to bootargs
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
| |
*rcw-bin merge to rcw
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The u-boot-fslc now depends on bison to complete the build.
This patch fixes the following error message:
| rm -f .tmp_quiet_recordmcount
| make -f
/home/daiane/code/yocto/master/build/tmp/work/imx7dsabresd-fslc-linux-gnueabi/u-boot-fslc/v2018.07+gitAUTOINC+bc558729a7-r0/git/scripts/Makefile.build
obj=scripts/kconfig mx7dsabresd_config
| bison -oscripts/kconfig/zconf.tab.c -t -l
/home/daiane/code/yocto/master/build/tmp/work/imx7dsabresd-fslc-linux-gnueabi/u-boot-fslc/v2018.07+gitAUTOINC+bc558729a7-r0/git/scripts/kconfig/zconf.y
| /bin/sh: 1: bison: not found
| scripts/Makefile.lib:228: recipe for target
'scripts/kconfig/zconf.tab.c' failed
| make[2]: *** [scripts/kconfig/zconf.tab.c] Error 12
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
| |
- Vp9: rectify the consumed length for error return
- MJPEG: bug fixing in trickmode
- H264: bug fixing for special clip containing invalid syntax value
- RV: limit the HW read pointer in valid range
- Common: Export setinfo() API in codec.h
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
Fix channel swap issues seen for ak4458 and ak5558 codecs on audio board
for i.MX 8MQ. Changes applicable to all platforms.
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
Split one ESAI device into two virtual devices, one
6 channel and one 2 channel.
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
Fix incorrect buffer size by removing buffer_time from dmix
configuration settings.
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
| |
dtc-145-native is used by older U-Boot recipes. U-Boot only depends on
the native dtc binary. So, to not clash with files from the regular dtc native
build do only install the dtc binary renamed to dtc-145. Also, create
a new class to handle with dtc-145 dependency.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
|
|
|
|
| |
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This updates the fork on top of current 2018.07 release and also adds
a much improved support to pico-imx7d and pico-imx6ul. The list of
commits included are:
bc558729a7 warp7: update defconfig to support the generic loading interface
e5a6138278 mx25pdk: Change root to use a single partition layout
f9d1e13cf5 mx6sabre_common: Dynamically change the video output
865268ce8a mx6sabresd: Enable video interfaces in bootargs
7db6f3d8c5 mx6sabresd: Use LDO dtb file until LDO bypass support is added
84fc5b0de1 mx6slevk: Use LDO dtb file until LDO bypass support is added
ccf16e75e7 pico-imx6ul: Convert to distro config
06eecc42a2 configs/imx: Remove 'mmcautodect' variable
12c65ae7a9 pico-imx7d: Add new pico-pi config
fe4fd4e1ea pico-imx7d: README: Drop old instructions about secure mode
a076cc293b pico-imx7d: README: Use dfu-util to flash U-Boot
24f9fcde47 pico-imx7d: Enable auxiliary code support
78fead0843 pico-imx7d: Allow default fdtfile to be overridden by defconfig
04d0d8894f pico-imx7d: Do not override addrmap5
e5833f48e6 pico-imx7d: Enable CONFIG_ARMV7_BOOT_SEC_DEFAULT
ceb9087434 pico-imx7d: Add Falcon mode support
8800626580 pico-imx7d: Add bootmenu to choose the baseboard
f2c33216e7 pico-imx7d: Add support for update SPL using DFU
6cc975154d pico-imx7d: Add SPL support
349985a0f2 pico-imx7d: Add fastboot support
76a4da5eb1 pico-imx7d: Add default DFU targets
c6c4a0e0d8 pico-imx7d: Add GPT partitioning support
9ac7204c7a pico-imx7d: Fix common distro configuration behavior
62523103a0 pico-imx7d: Convert to distro config
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
| |
All variants depends on `virtual/kernel`, `imx-lib` and `alsa-lib`, so
this can be added by default.
The VPU support has been moved to a `PACKAGECONFIG` so it adds the
respective `make` parameter, and dependency, depending on the
`MACHINEOVERRIDES` value.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
| |
Those are untested and anyone interested in supporting them (mainly
barebox) ought to send the support to OE-Core instead.
This also removes the corresponding code from the
image_types_fsl.bbclass as it is not going to be used from now on.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
| |
This includes the following change:
e48de4f - update binaries for LSDK 18.06
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Following changes are included:
11abda9 - armv8: ls2080ardb: update copyright claim
7d5b814 - Revert "EHCI: Fix endian access issue on EHCI intinalization"
160deab - Revert "powerpc/T104xRDB: Fix endian access issue on EHCI intinalization"
007ac5c - Revert "powerpc/p1_p2_rdb_pc: Fix endian access issue on EHCI intinalization"
e82a7bc - LS1043ARBD: Fix SD Boot issue with PPA
ec7f4b3 - armv8: ls1088a: change dpl load address to 0x80001000 from 0x80000000
93bb79f - board: freescale: ls1012afrwy: Add LS1012A-FRWY board support.
aabf70f - board: freescale: ls1012afrx:Common files to support
da97a2b - watchdog: disable to build the driver in default
60afe56 - watchdog: Kconfig: add config to disable wdog reset
cf17a12 - watchdog: driver support for layerscape
6ac9ac0 - armv8: ls1088: change ttyS1 to ttyS0
0c9305b - boards: freescale: lsch3: Add 0.9v entry for vid
0346460 - armv8: ls1088a: change dpl load command from apply to lazyapply.
c43f05a - drivers/net/vsc9953: Initialize action RAM in VCAP complex
0a1adba - board: Kconfig: Re-Arrangement of PPA firmware and header addresses
ecf1d55 - arm: ls1021aqds: config: enable CONFIG_ID_EEPROM for mac command
4d94f28 - board: freescale: ls1012ardb: Add command to switch QSPI bank
cba0675 - driver/mtd/spi: Default page size Spansion flash "S25FS512S" is 256b
7c4f3c8 - LS1012AFRWY: Add Secure Boot support
51a93cc - board: move ppa header address in board specific kconfig
e26f485 - board: ls1012a: FRWY-LS1012A board support
d000b14 - board: move ppa firmware address in board specific kconfig
2f51b35 - armv8: ls1088a: Enable USB in ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
842df34 - armv8/fsl-lsch2: make the workaround for PIN MUX erratum A010539 robust
1fa9417 - armv8: sec_firmware: Add support for multiple loadables
eca9656 - armv8/fsl-lsch2: correct QMAN clock
c3a6ed4 - driver: net: fsl-mc: updated copyright info
39966d9 - armv8: ls1088a: Move CONFIG_BOOTARGS and CONFIG_CMD_GREPENV to defconfig
ccde7d9 - armv8: ls1088aqds: Enable mdio commands on u-boot prompt
9c912c7 - armv8: sec_firmware: Remove JR3 from device tree node in all cases
5ecc2f5 - mmc: fsl_esdhc: fix probe issue without CONFIG_BLK enabled
8ed20db - usb: Add delay to fix USB 2.0 stick enumeration failure on LS208xA
b133620 - EHCI: Fix endian access issue on EHCI intinalization
faf6feb - u-boot: fixup the iommu-map property of fsl-mc node
8e0c780 - powerpc: configs: Set initrd_high environment varible
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
*include the following changes:
50c825b - DNCPE-372 Update binary files
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
*include the following changes:
1f43bef - Fix PBI command length for both ls1088ard and ls1088aqds boards.
32f8b4f - ls2088ardb_rev1.1: Add rcw_2100.rcw for serdes protocol 2a_41
84078ad - Include auto swapped binaries for qspiboot during install target
8646cf1 - ls2088ardb: Add rcw_2100.rcw for serdes protocol 2a_41
591b59d - ls1012a: Add ls1012afrwy RCW configuration files
fd6b9ef - Add support to auto swap rcw for qspiboot if required.
6f514c1 - Ls1043aqds: Fix building error for rcw_1600.rcw
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
*include the following changes:
dcbe27b - Adding policy.h flag for spectre v4 mitigation
4fbad6a - Fix suppression flag on sec_init
24d6891 - Adding SUPPRESS_TZC and SUPPRESS_SEC to policy cfg file; Adding platforms qds & rdb to device LX2160; Adding platform emu t
006a0e5 - Correcting disable load-pass-store in CPUACTLR from bit [53] to bit [55]
8e557f9 - Adding spectre v4 mitigation for a57, a72 cores.
b0a07cf - Updating reset function for LX2160.
74814cf - Increasing L3 cache flush timeout from 100ms to 333ms.
9d5ecd2 - Enabled OP-TEE support on LS1012FRWY baord.
9950f2b - Removing wfe from core 0 sequence when waiting for soc init tasks to complete.
508ed94 - Enabling initialization of the CCN-508 interconnect.
fcede9a - Adding support for ls1043 variant ls1023, and ls1046 variant ls1026.
7d5dcc1 - Fixing PSCI_SYS_OFF so that this function never returns.
8e8fc09 - Removing \r from line endings of shell script gen_its.
1c4fc78 - its: Correct config node as per upstream u-boot guideline
f00e7ef - Adding smc function SIP_HW_UNQ_KEY_32.
c87863a - Fixing usage of _check_sec_disabled().
d0ec59c - Fix for PLATSEC-437 & PLATSEC-457.
926fb97 - Adding smc function (SIP_ALLOW_L2_CLR_32) to allow clearing of L2 memory errs.
781d7b5 - Fixing broken build of LS1043, LS1012.
7289e86 - Adding smc function SIP_ALLOW_L1L2_ERR_32; Added test for SPD interface.
8804017 - Providing very fast-path for SMCC_ARCH_WORKAROUND_1
e9dfa28 - Moved _soc_check_sec_enabled() to _check_sec_disabled(); Fixed conflicting defs in LX2160 soc.h.
474b797 - Changing LX2160 cluster 3 handling from RCW frequency-based to RCW[850] selectable.
f56bd49 - fuse: Correct OTPMK value mapping to OTPMK registers
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Following changes are included:
de3c46f - api: add MC 10.8.0 APIs
7a3fa0f - Updated DPSECI API
2155e5c - Add MC 10.7.0 APIs
59edbdf - Added MC 10.4.0, 10.5.0 and 10.6.0 APIs
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
| |
*include the following changes:
9143c2a - Update EULA.txt
6ff561e - Add SCR.txt
*update LIC_FILES_CHKSUM
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
We need dtc version 1.4.5 to build u-boot-imx 2017.03, current
version 1.4.6 raise a lot of errors and can't build older U-Boot
version.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
| |
- Remove .inc file to use only one .bb file
- Add alsa-lib to DEPENDS
- Add patch to use include path when compile sources from test directory
- Drop unused patch
- Update O.S. Systems Software Copyright
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
| |
- Update O.S. Systems Software Copyright
This includes the following change:
- 3f77797 MLK-16374-5: PXP_LIB: configure pxp to be legacy mode
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Add O.S. Systems Software Copyright
This includes the following changes:
- c70685d Merge pull request #13 from allenxh/imx8
- d8e5142 imx-kobs: support burn images to imx8mq ddr4 arm2 NAND
- a0e9adc Merge pull request #10 from allenxh/imx8
- 89c14fe imx-kobs: support i.MX8 platforms
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
- Update license checksum to match EULA v22 April 2018.
- Remove .inc file to use only one .bb file
- Update O.S. Systems Software Copyright
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
- Update to latest stable branch
- Add O.S. Systems Software Copyright
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
|
|
|
|
|
|
|
|
|
| |
- Get imx-firmware source code from github.com/NXP
- Remove .inc file to use only one .bb file
- Update license checksum to match EULA v22 April 2018.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
| |
Following changes are included:
a092fb1504 spl: Add default values for ARCH_MX7
17ee0afbc7 wandboard: Remove hardcoded baudrate from "console" variable
a9cd19f296 pico-imx7d: Adjust the dtb name
Change-Id: If3c37fb22924dbd7489c188ff45dd590224e255c
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
The revision used was of a pre-release and we ought to instead point
to the current final release. Fixup it.
Change-Id: Ic1ff8641a3b1d135610b51b5051c2974daf9d88c
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
| |
This upgrades the fork for the latest stable release.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
| |
Includes:
* multi UDC support
* linuxrc script fixes
* use soc_uid as usb gadget serial number
Signed-off-by: Marc Ferland <ferlandm@amotus.ca>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
| |
The dtc must be available during build time. It fixes a build error
when host does not have it installed and we are building a native
variant.
Change-Id: I3a64d40575bce9ae4289a419ea8892fe006b7de6
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|