1 files changed, 64 insertions, 61 deletions

diff --git a/documentation/ref-manual/variables.rst b/documentation/ref-manual/variables.rst
index d3aae63308..ca62365cc3 100644
--- a/documentation/ref-manual/variables.rst
+++ b/documentation/ref-manual/variables.rst
@@ -203,8 +203,9 @@ system and gives an overview of their function and contents.
       packages should be checked for libraries and renamed according to
       Debian library package naming.
 
-      The default value is "${PACKAGES}", which causes the debian class to
-      act on all packages that are explicitly generated by the recipe.
+      The default value is "${PACKAGES}", which causes the
+      :ref:`debian <ref-classes-debian>` class to act on all packages that are
+      explicitly generated by the recipe.
 
    :term:`AUTOREV`
       When :term:`SRCREV` is set to the value of this variable, it specifies to
@@ -576,9 +577,9 @@ system and gives an overview of their function and contents.
       ``quilt-native``, which is a copy of Quilt built to run on the build
       system; "crosses" such as ``gcc-cross``, which is a compiler built to
       run on the build machine but produces binaries that run on the target
-      :term:`MACHINE`; "nativesdk", which targets the SDK
-      machine instead of :term:`MACHINE`; and "mulitlibs" in the form
-      "``multilib:``\ multilib_name".
+      :term:`MACHINE`; ":ref:`nativesdk <ref-classes-nativesdk>`", which
+      targets the SDK machine instead of :term:`MACHINE`; and "mulitlibs" in
+      the form "``multilib:``\ multilib_name".
 
       To build a different variant of the recipe with a minimal amount of
       code, it usually is as simple as adding the following to your recipe::
@@ -906,7 +907,7 @@ system and gives an overview of their function and contents.
       The toolchain binary prefix used for native recipes. The OpenEmbedded
       build system uses the :term:`BUILD_PREFIX` value to set the
       :term:`TARGET_PREFIX` when building for
-      ``native`` recipes.
+      :ref:`native <ref-classes-native>` recipes.
 
    :term:`BUILD_STRIP`
       Specifies the command to be used to strip debugging symbols from
@@ -917,7 +918,7 @@ system and gives an overview of their function and contents.
    :term:`BUILD_SYS`
       Specifies the system, including the architecture and the operating
       system, to use when building for the build host (i.e. when building
-      ``native`` recipes).
+      :ref:`native <ref-classes-native>` recipes).
 
       The OpenEmbedded build system automatically sets this variable based
       on :term:`BUILD_ARCH`,
@@ -1417,8 +1418,10 @@ system and gives an overview of their function and contents.
    :term:`COPYLEFT_RECIPE_TYPES`
       A space-separated list of recipe types to include in the source
       archived by the :ref:`archiver <ref-classes-archiver>` class.
-      Recipe types are ``target``, ``native``, ``nativesdk``, ``cross``,
-      ``crosssdk``, and ``cross-canadian``.
+      Recipe types are ``target``, :ref:`native <ref-classes-native>`,
+      :ref:`nativesdk <ref-classes-nativesdk>`,
+      :ref:`cross <ref-classes-cross>`, :ref:`crosssdk <ref-classes-crosssdk>`,
+      and :ref:`cross-canadian <ref-classes-cross-canadian>`.
 
       The default value, which is "target*", for :term:`COPYLEFT_RECIPE_TYPES`
       is set by the :ref:`copyleft_filter <ref-classes-copyleft_filter>`
@@ -1751,9 +1754,8 @@ system and gives an overview of their function and contents.
    :term:`DEPLOY_DIR_DEB`
       Points to the area that the OpenEmbedded build system uses to place
       Debian packages that are ready to be used outside of the build
-      system. This variable applies only when
-      :term:`PACKAGE_CLASSES` contains
-      "package_deb".
+      system. This variable applies only when :term:`PACKAGE_CLASSES` contains
+      ":ref:`package_deb <ref-classes-package_deb>`".
 
       The BitBake configuration file initially defines the
       :term:`DEPLOY_DIR_DEB` variable as a sub-folder of
@@ -1794,9 +1796,8 @@ system and gives an overview of their function and contents.
    :term:`DEPLOY_DIR_IPK`
       Points to the area that the OpenEmbedded build system uses to place
       IPK packages that are ready to be used outside of the build system.
-      This variable applies only when
-      :term:`PACKAGE_CLASSES` contains
-      "package_ipk".
+      This variable applies only when :term:`PACKAGE_CLASSES` contains
+      ":ref:`package_ipk <ref-classes-package_ipk>`".
 
       The BitBake configuration file initially defines this variable as a
       sub-folder of :term:`DEPLOY_DIR`::
@@ -1814,9 +1815,8 @@ system and gives an overview of their function and contents.
    :term:`DEPLOY_DIR_RPM`
       Points to the area that the OpenEmbedded build system uses to place
       RPM packages that are ready to be used outside of the build system.
-      This variable applies only when
-      :term:`PACKAGE_CLASSES` contains
-      "package_rpm".
+      This variable applies only when :term:`PACKAGE_CLASSES` contains
+      ":ref:`package_rpm <ref-classes-package_rpm>`".
 
       The BitBake configuration file initially defines this variable as a
       sub-folder of :term:`DEPLOY_DIR`::
@@ -1834,9 +1834,8 @@ system and gives an overview of their function and contents.
    :term:`DEPLOY_DIR_TAR`
       Points to the area that the OpenEmbedded build system uses to place
       tarballs that are ready to be used outside of the build system. This
-      variable applies only when
-      :term:`PACKAGE_CLASSES` contains
-      "package_tar".
+      variable applies only when :term:`PACKAGE_CLASSES` contains
+      ":ref:`package_tar <ref-classes-package_tar>`".
 
       The BitBake configuration file initially defines this variable as a
       sub-folder of :term:`DEPLOY_DIR`::
@@ -1993,11 +1992,11 @@ system and gives an overview of their function and contents.
 
    :term:`DISTRO_FEATURES_FILTER_NATIVESDK`
       Specifies a list of features that if present in the target
-      :term:`DISTRO_FEATURES` value should be
-      included in :term:`DISTRO_FEATURES` when building nativesdk recipes. This
-      variable is used in addition to the features filtered using the
-      :term:`DISTRO_FEATURES_NATIVESDK`
-      variable.
+      :term:`DISTRO_FEATURES` value should be included in
+      :term:`DISTRO_FEATURES` when building
+      :ref:`nativesdk <ref-classes-nativesdk>` recipes. This variable is used
+      in addition to the features filtered using the
+      :term:`DISTRO_FEATURES_NATIVESDK` variable.
 
    :term:`DISTRO_FEATURES_NATIVE`
       Specifies a list of features that should be included in
@@ -2010,10 +2009,9 @@ system and gives an overview of their function and contents.
    :term:`DISTRO_FEATURES_NATIVESDK`
       Specifies a list of features that should be included in
       :term:`DISTRO_FEATURES` when building
-      nativesdk recipes. This variable is used in addition to the features
-      filtered using the
-      :term:`DISTRO_FEATURES_FILTER_NATIVESDK`
-      variable.
+      :ref:`nativesdk <ref-classes-nativesdk>` recipes. This variable is used
+      in addition to the features filtered using the
+      :term:`DISTRO_FEATURES_FILTER_NATIVESDK` variable.
 
    :term:`DISTRO_NAME`
       The long name of the distribution. For information on the short name
@@ -4124,12 +4122,12 @@ system and gives an overview of their function and contents.
 
    :term:`KERNEL_CLASSES`
       A list of classes defining kernel image types that the
-      :ref:`kernel <ref-classes-kernel>` class should inherit. You
-      typically append this variable to enable extended image types. An
-      example is the "kernel-fitimage", which enables fitImage support and
-      resides in ``meta/classes-recipe/kernel-fitimage.bbclass``. You can register
-      custom kernel image types with the :ref:`kernel <ref-classes-kernel>` class using this
-      variable.
+      :ref:`kernel <ref-classes-kernel>` class should inherit. You typically
+      append this variable to enable extended image types. An example is
+      ":ref:`kernel-fitimage <ref-classes-kernel-fitimage>`", which enables
+      fitImage support and resides in ``meta/classes-recipe/kernel-fitimage.bbclass``.
+      You can register custom kernel image types with the
+      :ref:`kernel <ref-classes-kernel>` class using this variable.
 
    :term:`KERNEL_DEBUG_TIMESTAMPS`
       If set to "1", enables timestamping functionality during building
@@ -4949,16 +4947,18 @@ system and gives an overview of their function and contents.
 
       .. note::
 
-         The "ML" in :term:`MLPREFIX` stands for "MultiLib". This representation is
-         historical and comes from a time when ``nativesdk`` was a suffix
-         rather than a prefix on the recipe name. When ``nativesdk`` was turned
+         The "ML" in :term:`MLPREFIX` stands for "MultiLib". This representation
+         is historical and comes from a time when
+         ":ref:`nativesdk <ref-classes-nativesdk>`"
+         was a suffix rather than a prefix on the recipe name. When
+         ":ref:`nativesdk <ref-classes-nativesdk>`" was turned
          into a prefix, it made sense to set :term:`MLPREFIX` for it as well.
 
       To help understand when :term:`MLPREFIX` might be needed, consider when
       :term:`BBCLASSEXTEND` is used to provide a
-      ``nativesdk`` version of a recipe in addition to the target version.
-      If that recipe declares build-time dependencies on tasks in other
-      recipes by using :term:`DEPENDS`, then a dependency on
+      :ref:`nativesdk <ref-classes-nativesdk>` version of a recipe in addition
+      to the target version. If that recipe declares build-time dependencies
+      on tasks in other recipes by using :term:`DEPENDS`, then a dependency on
       "foo" will automatically get rewritten to a dependency on
       "nativesdk-foo". However, dependencies like the following will not
       get rewritten automatically::
@@ -5406,12 +5406,13 @@ system and gives an overview of their function and contents.
       OpenEmbedded build system uses when packaging data.
 
       You can provide one or more of the following arguments for the
-      variable: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk
-      package_tar"
+      variable::
+
+         PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk package_tar"
 
       .. note::
 
-         While it is a legal option, the ``package_tar``
+         While it is a legal option, the :ref:`package_tar <ref-classes-package_tar>`
          class has limited functionality due to no support for package
          dependencies by that backend. Therefore, it is recommended that
          you do not use it.
@@ -5925,8 +5926,9 @@ system and gives an overview of their function and contents.
    :term:`PIXBUF_PACKAGES`
       When inheriting the :ref:`pixbufcache <ref-classes-pixbufcache>`
       class, this variable identifies packages that contain the pixbuf
-      loaders used with ``gdk-pixbuf``. By default, the ``pixbufcache``
-      class assumes that the loaders are in the recipe's main package (i.e.
+      loaders used with ``gdk-pixbuf``. By default, the
+      :ref:`pixbufcache <ref-classes-pixbufcache>` class assumes that
+      the loaders are in the recipe's main package (i.e.
       ``${``\ :term:`PN`\ ``}``). Use this variable if the
       loaders you need are in a package other than that main package.
 
@@ -6358,7 +6360,7 @@ system and gives an overview of their function and contents.
 
    :term:`PYTHON_PN`
       When used by recipes that inherit the
-      :ref:`setuptools3 <ref-classes-setuptools3>` classe, specifies the
+      :ref:`setuptools3 <ref-classes-setuptools3>` class, specifies the
       major Python version being built. For Python 3.x, :term:`PYTHON_PN` would
       be "python3". You do not have to set this variable as the
       OpenEmbedded build system automatically sets it for you.
@@ -6562,10 +6564,9 @@ system and gives an overview of their function and contents.
       for the same recipe, the :term:`REQUIRED_VERSION` value applies.
 
    :term:`RM_WORK_EXCLUDE`
-      With ``rm_work`` enabled, this variable specifies a list of recipes
-      whose work directories should not be removed. See the
-      ":ref:`ref-classes-rm-work`" section for more
-      details.
+      With :ref:`rm_work <ref-classes-rm-work>` enabled, this variable
+      specifies a list of recipes whose work directories should not be removed.
+      See the ":ref:`ref-classes-rm-work`" section for more details.
 
    :term:`ROOT_HOME`
       Defines the root home directory. By default, this directory is set as
@@ -6830,9 +6831,9 @@ system and gives an overview of their function and contents.
 
    :term:`SDK_DEPLOY`
       The directory set up and used by the
-      :ref:`populate_sdk_base <ref-classes-populate-sdk>` class to which
-      the SDK is deployed. The ``populate_sdk_base`` class defines
-      :term:`SDK_DEPLOY` as follows::
+      :ref:`populate_sdk_base <ref-classes-populate-sdk>` class to which the
+      SDK is deployed. The :ref:`populate_sdk_base <ref-classes-populate-sdk>`
+      class defines :term:`SDK_DEPLOY` as follows::
 
          SDK_DEPLOY = "${TMPDIR}/deploy/sdk"
 
@@ -6950,7 +6951,8 @@ system and gives an overview of their function and contents.
       :term:`SDK_DIR` variable for more information.
 
    :term:`SDK_PREFIX`
-      The toolchain binary prefix used for ``nativesdk`` recipes. The
+      The toolchain binary prefix used for
+      :ref:`nativesdk <ref-classes-nativesdk>` recipes. The
       OpenEmbedded build system uses the :term:`SDK_PREFIX` value to set the
       :term:`TARGET_PREFIX` when building
       ``nativesdk`` recipes. The default value is "${SDK_SYS}-".
@@ -7761,7 +7763,7 @@ system and gives an overview of their function and contents.
 
       Some recipes build binaries that can run on the target system but
       those binaries in turn generate code for another different system
-      (e.g. cross-canadian recipes). Using terminology from GNU, the
+      (e.g. :ref:`cross-canadian <ref-classes-cross-canadian>` recipes). Using terminology from GNU, the
       primary system is referred to as the "HOST" and the secondary, or
       different, system is referred to as the "TARGET". Thus, the binaries
       run on the "HOST" system and generate binaries for the "TARGET"
@@ -8205,8 +8207,8 @@ system and gives an overview of their function and contents.
       -  For native recipes, the build system sets the variable to the
          value of :term:`BUILD_PREFIX`.
 
-      -  For native SDK recipes (``nativesdk``), the build system sets the
-         variable to the value of :term:`SDK_PREFIX`.
+      -  For native SDK recipes (:ref:`nativesdk <ref-classes-nativesdk>`),
+         the build system sets the variable to the value of :term:`SDK_PREFIX`.
 
    :term:`TARGET_SYS`
       Specifies the system, including the architecture and the operating
@@ -8817,8 +8819,9 @@ system and gives an overview of their function and contents.
    :term:`UBOOT_MKIMAGE_DTCOPTS`
       Options for the device tree compiler passed to mkimage '-D'
       feature while creating FIT image in :ref:`kernel-fitimage <ref-classes-kernel-fitimage>` class.
-      If :term:`UBOOT_MKIMAGE_DTCOPTS` is not set then kernel-fitimage will not
-      pass the ``-D`` option to mkimage.
+      If :term:`UBOOT_MKIMAGE_DTCOPTS` is not set then
+      :ref:`kernel-fitimage <ref-classes-kernel-fitimage>` will not pass the
+      ``-D`` option to mkimage.
 
    :term:`UBOOT_MKIMAGE_KERNEL_TYPE`
       Specifies the type argument for the kernel as passed to ``uboot-mkimage``.