initial commit for Enea Linux 4.0-140929daisy-140929

Migrated from the internal git server on the daisy-enea-point-release branch

Signed-off-by: Tudor Florea <tudor.florea@enea.com>

19 files changed, 721 insertions, 0 deletions

diff --git a/scripts/lib/bsp/substrate/target/arch/arm/conf/machine/{{=machine}}.conf b/scripts/lib/bsp/substrate/target/arch/arm/conf/machine/{{=machine}}.conf
new file mode 100644
index 0000000000..44a80d226c
--- /dev/null
+++ b/scripts/lib/bsp/substrate/target/arch/arm/conf/machine/{{=machine}}.conf
@@ -0,0 +1,105 @@
+#@TYPE: Machine
+#@NAME: {{=machine}}
+
+#@DESCRIPTION: Machine configuration for {{=machine}} systems
+
+{{ input type:"boolean" name:"xserver" prio:"50" msg:"Do you need support for X? (y/n)" default:"y" }}
+{{ if xserver == "y": }}
+PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg"
+XSERVER ?= "xserver-xorg \
+           xf86-input-evdev \
+           xf86-input-mouse \
+           xf86-video-omapfb \
+           xf86-input-keyboard"
+
+# Ship all kernel modules by default
+MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
+
+# Allow for MMC booting (required by the NAND-less Beagleboard XM)
+EXTRA_IMAGEDEPENDS += "u-boot"
+
+# Uncomment the following line to enable the hard floating point abi. Note that
+# this breaks some binary libraries and 3D (neither of which ship with
+# meta-yocto). For maximum compatibility, leave this disabled.
+#DEFAULTTUNE ?= "cortexa8hf-neon"
+{{ input type:"choicelist" name:"tunefile" prio:"40" msg:"Which machine tuning would you like to use?" default:"tune_cortexa8" }}
+{{ input type:"choice" val:"tune_arm1136jf_s" msg:"arm1136jf-s tuning optimizations" }}
+{{ input type:"choice" val:"tune_arm920t" msg:"arm920t tuning optimizations" }}
+{{ input type:"choice" val:"tune_arm926ejs" msg:"arm926ejs tuning optimizations" }}
+{{ input type:"choice" val:"tune_arm9tdmi" msg:"arm9tdmi tuning optimizations" }}
+{{ input type:"choice" val:"tune_cortexa5" msg:"cortexa5 tuning optimizations" }}
+{{ input type:"choice" val:"tune_cortexa7" msg:"cortexa7 tuning optimizations" }}
+{{ input type:"choice" val:"tune_cortexa8" msg:"cortexa8 tuning optimizations" }}
+{{ input type:"choice" val:"tune_cortexa9" msg:"cortexa9 tuning optimizations" }}
+{{ input type:"choice" val:"tune_cortexa15" msg:"cortexa15 tuning optimizations" }}
+{{ input type:"choice" val:"tune_cortexm1" msg:"cortexm1 tuning optimizations" }}
+{{ input type:"choice" val:"tune_cortexm3" msg:"cortexm3 tuning optimizations" }}
+{{ input type:"choice" val:"tune_cortexr4" msg:"cortexr4 tuning optimizations" }}
+{{ input type:"choice" val:"tune_ep9312" msg:"ep9312 tuning optimizations" }}
+{{ input type:"choice" val:"tune_iwmmxt" msg:"iwmmxt tuning optimizations" }}
+{{ input type:"choice" val:"tune_strongarm1100" msg:"strongarm1100 tuning optimizations" }}
+{{ input type:"choice" val:"tune_xscale" msg:"xscale tuning optimizations" }}
+{{ if tunefile == "tune_arm1136jf_s": }}
+include conf/machine/include/tune-arm1136jf-s.inc
+{{ if tunefile == "tune_arm920t": }}
+include conf/machine/include/tune-arm920t.inc
+{{ if tunefile == "tune_arm926ejs": }}
+include conf/machine/include/tune-arm926ejs.inc
+{{ if tunefile == "tune_arm9tdmi": }}
+include conf/machine/include/tune-arm9tdmi.inc
+{{ if tunefile == "tune_cortexa5": }}
+include conf/machine/include/tune-cortexa5.inc
+{{ if tunefile == "tune_cortexa7": }}
+include conf/machine/include/tune-cortexa7.inc
+{{ if tunefile == "tune_cortexa8": }}
+include conf/machine/include/tune-cortexa8.inc
+{{ if tunefile == "tune_cortexa9": }}
+include conf/machine/include/tune-cortexa9.inc
+{{ if tunefile == "tune_cortexa15": }}
+include conf/machine/include/tune-cortexa15.inc
+{{ if tunefile == "tune_cortexm1": }}
+include conf/machine/include/tune-cortexm1.inc
+{{ if tunefile == "tune_cortexm3": }}
+include conf/machine/include/tune-cortexm3.inc
+{{ if tunefile == "tune_cortexr4": }}
+include conf/machine/include/tune-cortexr4.inc
+{{ if tunefile == "tune_ep9312": }}
+include conf/machine/include/tune-ep9312.inc
+{{ if tunefile == "tune_iwmmxt": }}
+include conf/machine/include/tune-iwmmxt.inc
+{{ if tunefile == "tune_strongarm1100": }}
+include conf/machine/include/tune-strongarm1100.inc
+{{ if tunefile == "tune_xscale": }}
+include conf/machine/include/tune-xscale.inc
+
+IMAGE_FSTYPES += "tar.bz2 jffs2"
+EXTRA_IMAGECMD_jffs2 = "-lnp "
+
+# 2.6.37 and later kernels use OMAP_SERIAL, ttyO2
+# earlier kernels use ttyS2
+SERIAL_CONSOLE = "115200 ttyO2"
+
+{{ if kernel_choice == "custom": preferred_kernel = "linux-yocto-custom" }}
+{{ if kernel_choice == "linux-yocto-dev": preferred_kernel = "linux-yocto-dev" }}
+{{ if kernel_choice == "custom" or kernel_choice == "linux-yocto-dev" : }}
+PREFERRED_PROVIDER_virtual/kernel ?= "{{=preferred_kernel}}"
+
+{{ if kernel_choice != "custom" and kernel_choice != "linux-yocto-dev": preferred_kernel = kernel_choice.split('_')[0] }}
+{{ if kernel_choice != "custom" and kernel_choice != "linux-yocto-dev": preferred_kernel_version = kernel_choice.split('_')[1] }}
+{{ if kernel_choice != "custom" and kernel_choice != "linux-yocto-dev": }}
+PREFERRED_PROVIDER_virtual/kernel ?= "{{=preferred_kernel}}"
+PREFERRED_VERSION_{{=preferred_kernel}} ?= "{{=preferred_kernel_version}}%"
+
+KERNEL_IMAGETYPE = "zImage"
+KERNEL_DEVICETREE = "${S}/arch/arm/boot/dts/omap3-beagle.dts ${S}/arch/arm/boot/dts/omap3-beagle-xm.dts"
+
+SPL_BINARY = "MLO"
+UBOOT_SUFFIX = "img"
+{{ input type:"edit" name:"uboot_machine" prio:"40" msg:"Please specify a value for UBOOT_MACHINE:" default:"omap3_beagle_config" }}
+UBOOT_MACHINE = "{{=uboot_machine}}"
+{{ input type:"edit" name:"uboot_entrypoint" prio:"40" msg:"Please specify a value for UBOOT_ENTRYPOINT:" default:"0x80008000" }}
+UBOOT_ENTRYPOINT = "{{=uboot_entrypoint}}"
+{{ input type:"edit" name:"uboot_loadaddress" prio:"40" msg:"Please specify a value for UBOOT_LOADADDRESS:" default:"0x80008000" }}
+UBOOT_LOADADDRESS = "{{=uboot_loadaddress}}"
+
+MACHINE_FEATURES = "usbgadget usbhost vfat alsa"
diff --git a/scripts/lib/bsp/substrate/target/arch/arm/recipes-graphics/xorg-xserver/xserver-xf86-config/{{=machine}}/{{ if xserver == "y": }} xorg.conf b/scripts/lib/bsp/substrate/target/arch/arm/recipes-graphics/xorg-xserver/xserver-xf86-config/{{=machine}}/{{ if xserver == "y": }} xorg.conf
new file mode 100644
index 0000000000..264f3c91ad
--- /dev/null
+++ b/scripts/lib/bsp/substrate/target/arch/arm/recipes-graphics/xorg-xserver/xserver-xf86-config/{{=machine}}/{{ if xserver == "y": }} xorg.conf
@@ -0,0 +1,33 @@
+Section "Module"
+        Load    "extmod"
+        Load    "dbe"
+        Load    "glx"
+        Load    "freetype"
+        Load    "type1"
+        Load    "record"
+        Load    "dri"
+EndSection
+
+Section "Monitor"
+        Identifier      "Builtin Default Monitor"
+EndSection
+
+Section "Device"
+        Identifier      "Builtin Default fbdev Device 0"
+        Driver          "omapfb"
+EndSection
+
+Section "Screen"
+        Identifier      "Builtin Default fbdev Screen 0"
+        Device          "Builtin Default fbdev Device 0"
+        Monitor         "Builtin Default Monitor"
+EndSection
+
+Section "ServerLayout"
+        Identifier      "Builtin Default Layout"
+        Screen          "Builtin Default fbdev Screen 0"
+EndSection
+
+Section "ServerFlags"
+        Option          "DontZap"  "0"
+EndSection
diff --git a/scripts/lib/bsp/substrate/target/arch/arm/recipes-graphics/xorg-xserver/{{ if xserver == "y": }} xserver-xf86-config_0.1.bbappend b/scripts/lib/bsp/substrate/target/arch/arm/recipes-graphics/xorg-xserver/{{ if xserver == "y": }} xserver-xf86-config_0.1.bbappend
new file mode 100644
index 0000000000..72d991c7e5
--- /dev/null
+++ b/scripts/lib/bsp/substrate/target/arch/arm/recipes-graphics/xorg-xserver/{{ if xserver == "y": }} xserver-xf86-config_0.1.bbappend
@@ -0,0 +1 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
diff --git a/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/kernel-list.noinstall b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/kernel-list.noinstall
new file mode 100644
index 0000000000..a04e6c7852
--- /dev/null
+++ b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/kernel-list.noinstall
@@ -0,0 +1,5 @@
+{{ if kernel_choice != "custom": }}
+{{ input type:"boolean" name:"use_default_kernel" prio:"10" msg:"Would you like to use the default (3.14) kernel? (y/n)" default:"y"}}
+
+{{ if kernel_choice != "custom" and use_default_kernel == "n": }}
+{{ input type:"choicelist" name:"kernel_choice" gen:"bsp.kernel.kernels" prio:"10" msg:"Please choose the kernel to use in this BSP:" default:"linux-yocto_3.14"}}
diff --git a/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}-non_hardware.cfg b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}-non_hardware.cfg
new file mode 100644
index 0000000000..361343bb58
--- /dev/null
+++ b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}-non_hardware.cfg
@@ -0,0 +1,30 @@
+#
+# Miscellaneous filesystems
+#
+CONFIG_NFS_DEF_FILE_IO_SIZE=1024
+
+#
+# Multiple Device Support
+#
+# CONFIG_MD is not set
+
+# Kernel Features
+#
+CONFIG_NO_HZ=y
+
+#
+# CPUIdle
+#
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Kernel hacking
+#
+CONFIG_DEBUG_FS=y
+
+#
+# Power management options
+#
+CONFIG_PM_DEBUG=y
diff --git a/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}-preempt-rt.scc b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}-preempt-rt.scc
new file mode 100644
index 0000000000..56f7f0f1e3
--- /dev/null
+++ b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}-preempt-rt.scc
@@ -0,0 +1,13 @@
+define KMACHINE {{=machine}}
+define KTYPE preempt-rt
+define KARCH arm
+
+include {{=map_preempt_rt_kbranch(need_new_kbranch, new_kbranch, existing_kbranch)}}
+{{ if need_new_kbranch == "y": }}
+branch {{=machine}}
+
+include {{=machine}}.scc
+
+# default policy for preempt-rt kernels
+include features/latencytop/latencytop.scc
+include features/profiling/profiling.scc
diff --git a/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}-standard.scc b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}-standard.scc
new file mode 100644
index 0000000000..80640db4a2
--- /dev/null
+++ b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}-standard.scc
@@ -0,0 +1,13 @@
+define KMACHINE {{=machine}}
+define KTYPE standard
+define KARCH arm
+
+include {{=map_standard_kbranch(need_new_kbranch, new_kbranch, existing_kbranch)}}
+{{ if need_new_kbranch == "y": }}
+branch {{=machine}}
+
+include {{=machine}}.scc
+
+# default policy for standard kernels
+include features/latencytop/latencytop.scc
+include features/profiling/profiling.scc
diff --git a/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}-tiny.scc b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}-tiny.scc
new file mode 100644
index 0000000000..51eaf2d32c
--- /dev/null
+++ b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}-tiny.scc
@@ -0,0 +1,9 @@
+define KMACHINE {{=machine}}
+define KTYPE tiny
+define KARCH arm
+
+include {{=map_tiny_kbranch(need_new_kbranch, new_kbranch, existing_kbranch)}}
+{{ if need_new_kbranch == "y": }}
+branch {{=machine}}
+
+include {{=machine}}.scc
diff --git a/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}-user-config.cfg b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}-user-config.cfg
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}-user-config.cfg
diff --git a/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}-user-features.scc b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}-user-features.scc
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}-user-features.scc
diff --git a/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}-user-patches.scc b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}-user-patches.scc
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}-user-patches.scc
diff --git a/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}.cfg b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}.cfg
new file mode 100644
index 0000000000..10134c81f5
--- /dev/null
+++ b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}.cfg
@@ -0,0 +1,320 @@
+#
+# System Type
+#
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# TI OMAP Common Features
+#
+CONFIG_ARCH_OMAP2PLUS=y
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_SMARTREFLEX=y
+CONFIG_OMAP_SMARTREFLEX_CLASS3=y
+CONFIG_OMAP_MBOX_FWK=m
+CONFIG_OMAP_MBOX_KFIFO_SIZE=256
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP3_BEAGLE=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMBEE=y
+CONFIG_ARM_ERRATA_430973=y
+
+#
+# Kernel Features
+#
+CONFIG_LEDS=y
+
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_OMAP=y
+CONFIG_SERIAL_OMAP_CONSOLE=y
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_NEON=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_RUNTIME=y
+
+#
+# Generic Driver Options
+#
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+CONFIG_MTD_NAND=y
+
+CONFIG_MTD_NAND_OMAP2=y
+
+CONFIG_MTD_UBI=y
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_SMSC911X=y
+CONFIG_USB_NET_SMSC95XX=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_EVDEV=y
+
+#
+# Input Device Drivers
+#
+CONFIG_KEYBOARD_TWL4030=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_I2C=y
+CONFIG_I2C_OMAP=y
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_OMAP24XX=y
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_TWL4030=y
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Multifunction device drivers
+#
+CONFIG_TWL4030_CORE=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DUMMY=y
+CONFIG_REGULATOR_TWL4030=y
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_DRM=m
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=14
+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
+# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
+CONFIG_OMAP2_DSS_DPI=y
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+# CONFIG_OMAP2_DSS_SDI is not set
+CONFIG_OMAP2_DSS_DSI=y
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+CONFIG_FB_OMAP2_NUM_FBS=2
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC_DPI=y
+CONFIG_PANEL_DVI=y
+CONFIG_PANEL_SHARP_LS037V7DW01=y
+# CONFIG_PANEL_LGPHILIPS_LB035Q02 is not set
+# CONFIG_PANEL_TAAL is not set
+CONFIG_PANEL_TPO_TD043MTEA1=m
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+
+#
+# Console display driver support
+#
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_VGA_CONSOLE is not set
+
+# DMA Devices
+CONFIG_DMADEVICES=y
+CONFIG_DMA_OMAP=y
+CONFIG_DMA_OF=y
+
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_OMAP_TWL4030=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB=y
+CONFIG_USB_SUPPORT=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_OMAP2PLUS=y
+CONFIG_USB_OMAP=y
+
+#
+# OMAP 343x high speed USB support
+#
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_USB_INVENTRA_DMA=y
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_OTG_UTILS=y
+CONFIG_TWL4030_USB=y
+
+# USB gadget modules
+CONFIG_USB_G_NCM=y
+CONFIG_USB_MASS_STORAGE=y
+
+CONFIG_MMC=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP_HS=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_TWL4030=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_VFAT_FS=y
+
+#
+# Multimedia core support
+#
+
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Advanced Power Management Emulation support
+#
+CONFIG_APM_EMULATION=y
diff --git a/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}.scc b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}.scc
new file mode 100644
index 0000000000..24196e6f67
--- /dev/null
+++ b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice != "custom": }} files/{{=machine}}.scc
@@ -0,0 +1,7 @@
+kconf hardware {{=machine}}.cfg
+kconf non-hardware {{machine}}-non_hardware.cfg
+
+include features/usb-net/usb-net.scc
+
+kconf hardware {{=machine}}-user-config.cfg
+include {{=machine}}-user-patches.scc
diff --git a/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice == "linux-yocto-dev": }} linux-yocto-dev.bbappend b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice == "linux-yocto-dev": }} linux-yocto-dev.bbappend
new file mode 100644
index 0000000000..25c87a85ac
--- /dev/null
+++ b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice == "linux-yocto-dev": }} linux-yocto-dev.bbappend
@@ -0,0 +1,25 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" nameappend:"i386" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" nameappend:"i386" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Would you like SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-standard.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
diff --git a/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice == "linux-yocto-rt_3.10": }} linux-yocto-rt_3.10.bbappend b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice == "linux-yocto-rt_3.10": }} linux-yocto-rt_3.10.bbappend
new file mode 100644
index 0000000000..08b1f88d1b
--- /dev/null
+++ b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice == "linux-yocto-rt_3.10": }} linux-yocto-rt_3.10.bbappend
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/preempt-rt" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/preempt-rt/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/preempt-rt" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/preempt-rt/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-preempt-rt.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto-rt_{{=machine}} ?= "f35992f80c81dc5fa1a97165dfd5cbb84661f7cb"
+#SRCREV_meta_pn-linux-yocto-rt_{{=machine}} ?= "1b534b2f8bbe9b8a773268cfa30a4850346f6f5f"
+#LINUX_VERSION = "3.10.9"
diff --git a/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice == "linux-yocto-tiny_3.10": }} linux-yocto-tiny_3.10.bbappend b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice == "linux-yocto-tiny_3.10": }} linux-yocto-tiny_3.10.bbappend
new file mode 100644
index 0000000000..bc6968d832
--- /dev/null
+++ b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice == "linux-yocto-tiny_3.10": }} linux-yocto-tiny_3.10.bbappend
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-tiny.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto-tiny_{{=machine}} ?= "840bb8c059418c4753415df56c9aff1c0d5354c8"
+#SRCREV_meta_pn-linux-yocto-tiny_{{=machine}} ?= "4fd76cc4f33e0afd8f906b1e8f231b6d13b6c993"
+#LINUX_VERSION = "3.10.9"
diff --git a/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice == "linux-yocto-tiny_3.14": }} linux-yocto-tiny_3.14.bbappend b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice == "linux-yocto-tiny_3.14": }} linux-yocto-tiny_3.14.bbappend
new file mode 100644
index 0000000000..d221d5f2a4
--- /dev/null
+++ b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice == "linux-yocto-tiny_3.14": }} linux-yocto-tiny_3.14.bbappend
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-tiny.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto-tiny_{{=machine}} ?= "840bb8c059418c4753415df56c9aff1c0d5354c8"
+#SRCREV_meta_pn-linux-yocto-tiny_{{=machine}} ?= "4fd76cc4f33e0afd8f906b1e8f231b6d13b6c993"
+#LINUX_VERSION = "3.14"
diff --git a/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice == "linux-yocto_3.10": }} linux-yocto_3.10.bbappend b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice == "linux-yocto_3.10": }} linux-yocto_3.10.bbappend
new file mode 100644
index 0000000000..1e814c54d7
--- /dev/null
+++ b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice == "linux-yocto_3.10": }} linux-yocto_3.10.bbappend
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-standard.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto_{{=machine}} ?= "19f7e43b54aef08d58135ed2a897d77b624b320a"
+#SRCREV_meta_pn-linux-yocto_{{=machine}} ?= "459165c1dd61c4e843c36e6a1abeb30949a20ba7"
+#LINUX_VERSION = "3.10.9"
\ No newline at end of file
diff --git a/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice == "linux-yocto_3.14": }} linux-yocto_3.14.bbappend b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice == "linux-yocto_3.14": }} linux-yocto_3.14.bbappend
new file mode 100644
index 0000000000..ca7f8c5978
--- /dev/null
+++ b/scripts/lib/bsp/substrate/target/arch/arm/recipes-kernel/linux/{{ if kernel_choice == "linux-yocto_3.14": }} linux-yocto_3.14.bbappend
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-standard.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto_{{=machine}} ?= "840bb8c059418c4753415df56c9aff1c0d5354c8"
+#SRCREV_meta_pn-linux-yocto_{{=machine}} ?= "4fd76cc4f33e0afd8f906b1e8f231b6d13b6c993"
+#LINUX_VERSION = "3.14"
\ No newline at end of file