machine: Deprecate zcu1275 and zcu1285 machine conf files

Since zcu1275 and zcu1285 design xsa has deprecated, hence
deprecate zcu1275 and zcu1285 machine conf files.

Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>

2 files changed, 0 insertions, 104 deletions

diff --git a/meta-xilinx-bsp/conf/machine/zcu1275-zynqmp.conf b/meta-xilinx-bsp/conf/machine/zcu1275-zynqmp.conf
deleted file mode 100644
index 597c05a7..00000000
--- a/meta-xilinx-bsp/conf/machine/zcu1275-zynqmp.conf
+++ /dev/null
@@ -1,50 +0,0 @@
-#@TYPE: Machine
-#@NAME: zcu1275-zynqmp
-#@DESCRIPTION: Machine configuration for the ZCU1275 evaluation board.
-
-#### Preamble
-MACHINEOVERRIDES =. "${@['', 'zcu1275-zynqmp:']['zcu1275-zynqmp' !='${MACHINE}']}"
-#### Regular settings follow
-
-# Yocto device-tree variables
-YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "psu_uart_0"
-YAML_MAIN_MEMORY_CONFIG:pn-device-tree ?= "PSU_DDR_0"
-YAML_DT_BOARD_FLAGS ?= "{BOARD zcu1275-revb}"
-
-# Yocto arm-trusted-firmware(TF-A) variables
-ATF_CONSOLE_DEFAULT ?= "cadence"
-TFA_BL33_LOAD ?= "0x8000000"
-
-# Yocto PMUFW variables
-YAML_SERIAL_CONSOLE_STDIN:pn-pmu-firmware ?= "psu_uart_0"
-YAML_SERIAL_CONSOLE_STDOUT:pn-pmu-firmware ?= "psu_uart_0"
-
-# Yocto FSBL variables
-YAML_SERIAL_CONSOLE_STDIN:pn-fsbl-firmware ?= "psu_uart_0"
-YAML_SERIAL_CONSOLE_STDOUT:pn-fsbl-firmware ?= "psu_uart_0"
-
-# Yocto KERNEL Variables
-UBOOT_ENTRYPOINT  ?= "0x200000"
-UBOOT_LOADADDRESS ?= "0x200000"
-
-# zcu1275-zynqmp Serial Console
-SERIAL_CONSOLES ?= "115200;ttyPS0"
-YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200"
-
-# Required generic machine inclusion
-# ZCU1275 board uses ZynqMP DR device hence use soc variant based generic machine
-# inclusion
-require conf/machine/zynqmp-dr-generic.conf
-
-# This eval board machine conf file uses zcu1275-zynqmp xsa as reference input.
-# User can override with zcu1275 custom xsa using HDF_BASE and HDF_PATH variables
-# from local.conf.
-HDF_MACHINE = "zcu1275-zynqmp"
-
-# KERNEL_DEVICETREE is disabled as we use board device tree from DTG to match
-# the xsa. User can enable explicitly if required from local.conf.
-# KERNEL_DEVICETREE = "xilinx/zynqmp-zcu1275-revB.dtb"
-
-#### No additional settings should be after the Postamble
-#### Postamble
-PACKAGE_EXTRA_ARCHS:append = "${@['', 'zcu1275_zynqmp']['zcu1275-zynqmp' != '${MACHINE}']}"
diff --git a/meta-xilinx-bsp/conf/machine/zcu1285-zynqmp.conf b/meta-xilinx-bsp/conf/machine/zcu1285-zynqmp.conf
deleted file mode 100644
index 396eafe9..00000000
--- a/meta-xilinx-bsp/conf/machine/zcu1285-zynqmp.conf
+++ /dev/null
@@ -1,54 +0,0 @@
-#@TYPE: Machine
-#@NAME: zcu1285-zynqmp
-#@DESCRIPTION: Machine configuration for the ZCU1285 evaluation board.
-
-#### Preamble
-MACHINEOVERRIDES =. "${@['', 'zcu1285-zynqmp:']['zcu1285-zynqmp' !='${MACHINE}']}"
-#### Regular settings follow
-
-# Variables that changes based on hw design or board specific requirement must be
-# defined before calling the required inclusion file else pre-expansion value
-# defined in zynqmp-generic.conf will be set.
-
-# Yocto device-tree variables
-YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "psu_uart_0"
-YAML_MAIN_MEMORY_CONFIG:pn-device-tree ?= "PSU_DDR_0"
-YAML_DT_BOARD_FLAGS ?= "{BOARD zcu1285-reva}"
-
-# Yocto arm-trusted-firmware(TF-A) variables
-ATF_CONSOLE_DEFAULT ?= "cadence"
-TFA_BL33_LOAD ?= "0x8000000"
-
-# Yocto PMUFW variables
-YAML_SERIAL_CONSOLE_STDIN:pn-pmu-firmware ?= "psu_uart_0"
-YAML_SERIAL_CONSOLE_STDOUT:pn-pmu-firmware ?= "psu_uart_0"
-
-# Yocto FSBL variables
-YAML_SERIAL_CONSOLE_STDIN:pn-fsbl-firmware ?= "psu_uart_0"
-YAML_SERIAL_CONSOLE_STDOUT:pn-fsbl-firmware ?= "psu_uart_0"
-
-# Yocto KERNEL Variables
-UBOOT_ENTRYPOINT  ?= "0x200000"
-UBOOT_LOADADDRESS ?= "0x200000"
-
-# zcu1285-zynqmp Serial Console
-SERIAL_CONSOLES ?= "115200;ttyPS0"
-YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200"
-
-# Required generic machine inclusion
-# ZCU1285 board uses ZynqMP DR device hence use soc variant based generic machine
-# inclusion
-require conf/machine/zynqmp-dr-generic.conf
-
-# This eval board machine conf file uses zcu1285-zynqmp xsa as reference input.
-# User can override with zcu1285 custom xsa using HDF_BASE and HDF_PATH variables
-# from local.conf.
-HDF_MACHINE = "zcu1285-zynqmp"
-
-# KERNEL_DEVICETREE is disabled as we use board device tree from DTG to match
-# the xsa. User can enable explicitly if required from local.conf.
-# KERNEL_DEVICETREE = "xilinx/zynqmp-zcu1285-revA.dtb"
-
-#### No additional settings should be after the Postamble
-#### Postamble
-PACKAGE_EXTRA_ARCHS:append = "${@['', 'zcu1285_zynqmp']['zcu1285-zynqmp' != '${MACHINE}']}"