vmk180-versal.conf: Enable runqemu for vmk180 versal

Enable runqemu for vmk180-versal

Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>

1 files changed, 42 insertions, 0 deletions

diff --git a/meta-xilinx-bsp/conf/machine/vmk180-versal.conf b/meta-xilinx-bsp/conf/machine/vmk180-versal.conf
index 99379c66..baa5e12f 100644
--- a/meta-xilinx-bsp/conf/machine/vmk180-versal.conf
+++ b/meta-xilinx-bsp/conf/machine/vmk180-versal.conf
@@ -12,6 +12,10 @@ UBOOT_MACHINE ?= "xilinx_versal_virt_defconfig"
 
 SERIAL_CONSOLES ?= "115200;ttyAMA0"
 
+IMAGE_CLASSES += "image-types-xilinx-qemu"
+IMAGE_FSTYPES += "wic.qemu-sd"
+WKS_FILES ?= "sdimage-bootpart.wks"
+
 EXTRA_IMAGEDEPENDS += " \
    arm-trusted-firmware \
    virtual/boot-bin \
@@ -19,6 +23,8 @@ EXTRA_IMAGEDEPENDS += " \
    virtual/psm-firmware \
    virtual/plm \
    u-boot-zynq-scr \
+   qemu-devicetrees \
+   virtual/cdo \
 "
 
 IMAGE_BOOT_FILES += " \
@@ -27,3 +33,39 @@ IMAGE_BOOT_FILES += " \
     Image \
     boot.scr \
 "
+
+# This machine has a QEMU model, runqemu setup:
+QB_MACHINE = "-M arm-generic-fdt"
+QB_MEM = "-m 8G"
+QB_DEFAULT_KERNEL = "none"
+QB_NETWORK_DEVICE = ""
+QB_KERNEL_CMDLINE_APPEND ?= ""
+QB_NET = "none"
+
+QB_DEFAULT_FSTYPE_qemuboot-xilinx = "wic.qemu-sd"
+QB_OPT_APPEND_append_qemuboot-xilinx = " -boot mode=5"
+QB_ROOTFS_OPT_qemuboot-xilinx = " -drive if=sd,index=1,file=@ROOTFS@,format=raw"
+
+# Use booti 80000 6000000 4000000 to launch
+QB_OPT_APPEND ?= " -serial null -serial null -serial mon:stdio -display none"
+
+QB_OPT_APPEND_append_qemuboot-xilinx = " \
+    -hw-dtb ${DEPLOY_DIR_IMAGE}/qemu-hw-devicetrees/multiarch/board-versal-ps-vc-p-a2197-00.dtb \
+    -display none \
+    -net nic -net user,tftp=${DEPLOY_DIR_IMAGE} \
+    "
+
+# PLM instance args
+QB_PLM_OPT = " \
+    -M microblaze-fdt \
+    -device loader,file=${DEPLOY_DIR_IMAGE}/BOOT-${MACHINE}_bh.bin,addr=0xF201E000,force-raw  \
+    -device loader,addr=0xf0000000,data=0xba020004,data-len=4 \
+    -device loader,addr=0xf0000004,data=0xb800fffc,data-len=4 \
+    -device loader,file=${DEPLOY_DIR_IMAGE}/CDO/pmc_cdo.bin,addr=0xf2000000,force-raw \
+    -device loader,file=${DEPLOY_DIR_IMAGE}/plm-${MACHINE}.elf,cpu-num=1 \
+    -device loader,addr=0xF1110624,data=0x0,data-len=4 \
+    -device loader,addr=0xF1110620,data=0x1,data-len=4 \
+    -hw-dtb ${DEPLOY_DIR_IMAGE}/qemu-hw-devicetrees/multiarch/board-versal-pmc-vc-p-a2197-00.dtb \
+    -display none \
+    "
+QB_OPT_APPEND_append_qemuboot-xilinx = " -plm-args '${QB_PLM_OPT}'"