mpd: Initial add 0.17.1

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>

2 files changed, 464 insertions, 0 deletions

diff --git a/meta-multimedia/recipes-multimedia/musicpd/mpd/mpd.conf.in b/meta-multimedia/recipes-multimedia/musicpd/mpd/mpd.conf.in
new file mode 100644
index 0000000000..f9f92c98bd
--- /dev/null
+++ b/meta-multimedia/recipes-multimedia/musicpd/mpd/mpd.conf.in
@@ -0,0 +1,420 @@
+# An example configuration file for MPD
+# See the mpd.conf man page for a more detailed description of each parameter.
+
+
+# Files and directories #######################################################
+#
+# This setting controls the top directory which MPD will search to discover the
+# available audio files and add them to the daemon's online database. This
+# setting defaults to the XDG directory, otherwise the music directory will be
+# be disabled and audio files will only be accepted over ipc socket (using
+# file:// protocol) or streaming files over an accepted protocol.
+#
+music_directory         "%music_directory%"
+#
+# This setting sets the MPD internal playlist directory. The purpose of this
+# directory is storage for playlists created by MPD. The server will use
+# playlist files not created by the server but only if they are in the MPD
+# format. This setting defaults to playlist saving being disabled.
+#
+playlist_directory              "%playlist_directory%"
+#
+# This setting sets the location of the MPD database. This file is used to
+# load the database at server start up and store the database while the
+# server is not up. This setting defaults to disabled which will allow
+# MPD to accept files over ipc socket (using file:// protocol) or streaming
+# files over an accepted protocol.
+#
+db_file                 "%db_file%"
+#
+# These settings are the locations for the daemon log files for the daemon.
+# These logs are great for troubleshooting, depending on your log_level
+# settings.
+#
+# The special value "syslog" makes MPD use the local syslog daemon. This
+# setting defaults to logging to syslog, otherwise logging is disabled.
+#
+log_file                        "%log_file%"
+#
+# This setting sets the location of the file which stores the process ID
+# for use of mpd --kill and some init scripts. This setting is disabled by
+# default and the pid file will not be stored.
+#
+#pid_file                       "/var/run/mpd/mpd.pid"
+#
+# This setting sets the location of the file which contains information about
+# most variables to get MPD back into the same general shape it was in before
+# it was brought down. This setting is disabled by default and the server
+# state will be reset on server start up.
+#
+state_file              "%state_file%"
+#
+# The location of the sticker database.  This is a database which
+# manages dynamic information attached to songs.
+#
+#sticker_file                   "~/.mpd/sticker.sql"
+#
+###############################################################################
+
+
+# General music daemon options ################################################
+#
+# This setting specifies the user that MPD will run as. MPD should never run as
+# root and you may use this setting to make MPD change its user ID after
+# initialization. This setting is disabled by default and MPD is run as the
+# current user.
+#
+user "mpd"
+#
+# This setting specifies the group that MPD will run as. If not specified
+# primary group of user specified with "user" setting will be used (if set).
+# This is useful if MPD needs to be a member of group such as "audio" to
+# have permission to use sound card.
+#
+group                           "audio"
+#
+# This setting sets the address for the daemon to listen on. Careful attention
+# should be paid if this is assigned to anything other then the default, any.
+# This setting can deny access to control of the daemon.
+#
+# For network
+bind_to_address         "any"
+#
+# And for Unix Socket
+#bind_to_address                "~/.mpd/socket"
+#
+# This setting is the TCP port that is desired for the daemon to get assigned
+# to.
+#
+#port                           "6600"
+#
+# This setting controls the type of information which is logged. Available
+# setting arguments are "default", "secure" or "verbose". The "verbose" setting
+# argument is recommended for troubleshooting, though can quickly stretch
+# available resources on limited hardware storage.
+#
+#log_level                      "default"
+#
+# If you have a problem with your MP3s ending abruptly it is recommended that
+# you set this argument to "no" to attempt to fix the problem. If this solves
+# the problem, it is highly recommended to fix the MP3 files with vbrfix
+# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
+# point gapless MP3 playback can be enabled.
+#
+#gapless_mp3_playback                   "yes"
+#
+# This setting enables MPD to create playlists in a format usable by other
+# music players.
+#
+#save_absolute_paths_in_playlists       "no"
+#
+# This setting defines a list of tag types that will be extracted during the
+# audio file discovery process. Optionally, 'comment' can be added to this
+# list.
+#
+#metadata_to_use        "artist,album,title,track,name,genre,date,composer,performer,disc"
+#
+# This setting enables automatic update of MPD's database when files in
+# music_directory are changed.
+#
+#auto_update    "yes"
+#
+# Limit the depth of the directories being watched, 0 means only watch
+# the music directory itself.  There is no limit by default.
+#
+#auto_update_depth "3"
+#
+###############################################################################
+
+
+# Symbolic link behavior ######################################################
+#
+# If this setting is set to "yes", MPD will discover audio files by following
+# symbolic links outside of the configured music_directory.
+#
+#follow_outside_symlinks        "yes"
+#
+# If this setting is set to "yes", MPD will discover audio files by following
+# symbolic links inside of the configured music_directory.
+#
+#follow_inside_symlinks         "yes"
+#
+###############################################################################
+
+
+# Zeroconf / Avahi Service Discovery ##########################################
+#
+# If this setting is set to "yes", service information will be published with
+# Zeroconf / Avahi.
+#
+#zeroconf_enabled               "yes"
+#
+# The argument to this setting will be the Zeroconf / Avahi unique name for
+# this MPD server on the network.
+#
+#zeroconf_name                  "Music Player"
+#
+###############################################################################
+
+
+# Permissions #################################################################
+#
+# If this setting is set, MPD will require password authorization. The password
+# can setting can be specified multiple times for different password profiles.
+#
+#password                        "password@read,add,control,admin"
+#
+# This setting specifies the permissions a user has who has not yet logged in.
+#
+#default_permissions             "read,add,control,admin"
+#
+###############################################################################
+
+
+# Input #######################################################################
+#
+
+input {
+        plugin "curl"
+#       proxy "proxy.isp.com:8080"
+#       proxy_user "user"
+#       proxy_password "password"
+}
+
+#
+###############################################################################
+
+# Audio Output ################################################################
+#
+# MPD supports various audio output types, as well as playing through multiple
+# audio outputs at the same time, through multiple audio_output settings
+# blocks. Setting this block is optional, though the server will only attempt
+# autodetection for one sound card.
+#
+# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
+# other audio outputs.
+#
+# board specific examples #####################################################
+# (feel free to add futher)
+#
+# gumstix overo (tested with TOBI expansion board)
+#audio_output {
+#       type            "alsa"
+#       name            "overo"
+#       mixer_control   "Headset"
+#       mixer_index     "0"
+#}
+#
+# general examples ############################################################
+#
+# An example of an ALSA output:
+#
+#audio_output {
+#       type            "alsa"
+#       name            "My ALSA Device"
+##      device          "hw:0,0"        # optional
+##      format          "44100:16:2"    # optional
+##      mixer_type      "hardware"      # optional
+##      mixer_device    "default"       # optional
+##      mixer_control   "PCM"           # optional
+##      mixer_index     "0"             # optional
+#}
+#
+# An example of an OSS output:
+#
+#audio_output {
+#       type            "oss"
+#       name            "My OSS Device"
+##      device          "/dev/dsp"      # optional
+##      format          "44100:16:2"    # optional
+##      mixer_type      "hardware"      # optional
+##      mixer_device    "/dev/mixer"    # optional
+##      mixer_control   "PCM"           # optional
+#}
+#
+# An example of a shout output (for streaming to Icecast):
+#
+#audio_output {
+#       type            "shout"
+#       encoding        "ogg"                   # optional
+#       name            "My Shout Stream"
+#       host            "localhost"
+#       port            "8000"
+#       mount           "/mpd.ogg"
+#       password        "hackme"
+#       quality         "5.0"
+#       bitrate         "128"
+#       format          "44100:16:1"
+##      protocol        "icecast2"              # optional
+##      user            "source"                # optional
+##      description     "My Stream Description" # optional
+##      genre           "jazz"                  # optional
+##      public          "no"                    # optional
+##      timeout         "2"                     # optional
+##      mixer_type      "software"              # optional
+#}
+#
+# An example of a recorder output:
+#
+#audio_output {
+#       type            "recorder"
+#       name            "My recorder"
+#       encoder         "vorbis"                # optional, vorbis or lame
+#       path            "/var/lib/mpd/recorder/mpd.ogg"
+##      quality         "5.0"                   # do not define if bitrate is defined
+#       bitrate         "128"                   # do not define if quality is defined
+#       format          "44100:16:1"
+#}
+#
+# An example of a httpd output (built-in HTTP streaming server):
+#
+#audio_output {
+#       type            "httpd"
+#       name            "My HTTP Stream"
+#       encoder         "vorbis"                # optional, vorbis or lame
+#       port            "8000"
+#       bind_to_address "0.0.0.0"               # optional, IPv4 or IPv6
+##      quality         "5.0"                   # do not define if bitrate is defined
+#       bitrate         "128"                   # do not define if quality is defined
+#       format          "44100:16:1"
+#       max_clients     "0"                     # optional 0=no limit
+#}
+#
+# An example of a pulseaudio output (streaming to a remote pulseaudio server)
+#
+#audio_output {
+#       type            "pulse"
+#       name            "My Pulse Output"
+##      server          "remote_server"         # optional
+##      sink            "remote_server_sink"    # optional
+#}
+#
+## Example "pipe" output:
+#
+#audio_output {
+#       type            "pipe"
+#       name            "my pipe"
+#       command         "aplay -f cd 2>/dev/null"
+## Or if you're want to use AudioCompress
+#       command         "AudioCompress -m | aplay -f cd 2>/dev/null"
+## Or to send raw PCM stream through PCM:
+#       command         "nc example.org 8765"
+#       format          "44100:16:2"
+#}
+#
+## An example of a null output (for no audio output):
+#
+#audio_output {
+#       type            "null"
+#       name            "My Null Output"
+#       mixer_type      "none"                  # optional
+#}
+#
+# This setting will change all decoded audio to be converted to the specified
+# format before being passed to the audio outputs. By default, this setting is
+# disabled.
+#
+#audio_output_format            "44100:16:2"
+#
+# If MPD has been compiled with libsamplerate support, this setting specifies
+# the sample rate converter to use.  Possible values can be found in the
+# mpd.conf man page or the libsamplerate documentation. By default, this is
+# setting is disabled.
+#
+#samplerate_converter           "Fastest Sinc Interpolator"
+#
+###############################################################################
+
+
+# Normalization automatic volume adjustments ##################################
+#
+# This setting specifies the type of ReplayGain to use. This setting can have
+# the argument "off", "album" or "track". See <http://www.replaygain.org>
+# for more details. This setting is off by default.
+#
+#replaygain                     "album"
+#
+# This setting sets the pre-amp used for files that have ReplayGain tags. By
+# default this setting is disabled.
+#
+#replaygain_preamp              "0"
+#
+# This setting enables on-the-fly normalization volume adjustment. This will
+# result in the volume of all playing audio to be adjusted so the output has
+# equal "loudness". This setting is disabled by default.
+#
+#volume_normalization           "no"
+#
+###############################################################################
+
+
+# MPD Internal Buffering ######################################################
+#
+# This setting adjusts the size of internal decoded audio buffering. Changing
+# this may have undesired effects. Don't change this if you don't know what you
+# are doing.
+#
+#audio_buffer_size              "2048"
+#
+# This setting controls the percentage of the buffer which is filled before
+# beginning to play. Increasing this reduces the chance of audio file skipping,
+# at the cost of increased time prior to audio playback.
+#
+#buffer_before_play             "10%"
+#
+###############################################################################
+
+
+# Resource Limitations ########################################################
+#
+# These settings are various limitations to prevent MPD from using too many
+# resources. Generally, these settings should be minimized to prevent security
+# risks, depending on the operating resources.
+#
+#connection_timeout             "60"
+#max_connections                "10"
+#max_playlist_length            "16384"
+#max_command_list_size          "2048"
+#max_output_buffer_size         "8192"
+#
+###############################################################################
+
+
+# Character Encoding ##########################################################
+#
+# If file or directory names do not display correctly for your locale then you
+# may need to modify this setting.
+#
+#filesystem_charset             "UTF-8"
+#
+# This setting controls the encoding that ID3v1 tags should be converted from.
+#
+#id3v1_encoding                 "ISO-8859-1"
+#
+###############################################################################
+
+
+# SIDPlay decoder #############################################################
+#
+# songlength_database:
+#  Location of your songlengths file, as distributed with the HVSC.
+#  The sidplay plugin checks this for matching MD5 fingerprints.
+#  See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
+#
+# default_songlength:
+#  This is the default playing time in seconds for songs not in the
+#  songlength database, or in case you're not using a database.
+#  A value of 0 means play indefinitely.
+#
+# filter:
+#  Turns the SID filter emulation on or off.
+#
+#decoder {
+#       plugin                  "sidplay"
+#       songlength_database     "/media/C64Music/DOCUMENTS/Songlengths.txt"
+#       default_songlength      "120"
+#       filter "true"
+#}
+#
+###############################################################################
+
diff --git a/meta-multimedia/recipes-multimedia/musicpd/mpd_0.17.1.bb b/meta-multimedia/recipes-multimedia/musicpd/mpd_0.17.1.bb
new file mode 100644
index 0000000000..b3b82c4cb8
--- /dev/null
+++ b/meta-multimedia/recipes-multimedia/musicpd/mpd_0.17.1.bb
@@ -0,0 +1,44 @@
+DESCRIPTION = "Music Player Daemon"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=751419260aa954499f7abaabaa882bbe"
+HOMEPAGE ="http://sourceforge.net/projects/musicpd"
+
+DEPENDS = "alsa-lib libsamplerate0 libsndfile1 libvorbis libogg faad2 ffmpeg curl sqlite bzip2 pulseaudio \
+           ${@base_conditional('ENTERPRISE_DISTRO', '1', '', 'libmad lame libid3tag', d)}"
+
+SRC_URI = " \
+    ${SOURCEFORGE_MIRROR}/musicpd/${PN}/${PV}/${PN}-${PV}.tar.bz2 \
+    file://mpd.conf.in \
+"
+
+SRC_URI[md5sum] = "da3f3d6617a877192db4c6f53504cd38"
+SRC_URI[sha256sum] = "b18cdb1b779ca2ab323e212a0af4a567b7da4881a4e96868a8979bdfdbe7c2e8"
+
+inherit autotools useradd
+
+EXTRA_OECONF = "enable_bzip2=yes"
+
+do_install_append() {
+    install -d ${D}/${localstatedir}/lib/mpd/music
+    chmod 775 ${D}/${localstatedir}/lib/mpd/music
+    install -d ${D}/${localstatedir}/lib/mpd/playlists
+    chown -R mpd ${D}/${localstatedir}/lib/mpd
+    chown mpd:mpd ${D}/${localstatedir}/lib/mpd/music
+
+    install -d ${D}/${sysconfdir}
+    install -m 644 ${WORKDIR}/mpd.conf.in ${D}/${sysconfdir}/mpd.conf
+    sed -i \
+        -e 's|%music_directory%|${localstatedir}/lib/mpd/music|' \
+        -e 's|%playlist_directory%|${localstatedir}/lib/mpd/playlists|' \
+        -e 's|%db_file%|${localstatedir}/lib/mpd/mpd.db|' \
+        -e 's|%log_file%|${localstatedir}/log/mpd.log|' \
+        -e 's|%state_file%|${localstatedir}/lib/mpd/state|' \
+        ${D}/${sysconfdir}/mpd.conf
+}
+
+USERADD_PACKAGES = "${PN}"
+USERADD_PARAM_${PN} = " \
+    --system --no-create-home \
+    --home ${localstatedir}/lib/mpd \
+    --groups audio \
+    --user-group mpd"