1 files changed, 149 insertions, 0 deletions

diff --git a/meta-nuc/README b/meta-nuc/README
new file mode 100644
index 00000000..3b68609f
--- /dev/null
+++ b/meta-nuc/README
@@ -0,0 +1,149 @@
+This README file contains information on building the meta-nuc
+BSP layer, and booting the images contained in the /binary directory.
+Please see the corresponding sections below for details.
+
+This BSP is made specifically for "Next Unit of Computing Kit DC3217IYE"
+with Intel Centrino Advanced-N 6235 Wireless mini PCI Express card.
+
+Further information on this NUC platform can be found here:
+
+  http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/desktop-boards-d33217gke-dc3217iye.html
+
+Information on all Intel® embedded platforms can be found here:
+
+  http://www.intel.com/p/en_US/embedded/hwsw/hardware
+
+
+Compliance
+==========
+
+This BSP is compliant with the Yocto Project as per the requirements
+listed here:
+
+  http://www.yoctoproject.org/yocto-project-compatible-registration
+
+
+Dependencies
+============
+
+This layer depends on:
+
+  URI: git://git.openembedded.org/bitbake
+  branch: master
+
+  URI: git://git.openembedded.org/openembedded-core
+  layers: meta
+  branch: master
+
+  URI: git://git.yoctoproject.org/meta-intel
+  layers: intel
+  branch: master
+
+
+Patches
+=======
+
+Please submit any patches against this BSP to the Yocto mailing list
+(yocto@yoctoproject.org) and cc: the maintainer:
+
+Maintainer: Nitin A Kamble <nitin.a.kamble@intel.com>
+
+Please see the meta-intel/MAINTAINERS file for more details.
+
+
+Table of Contents
+=================
+
+  I. Building the meta-nuc BSP layer
+ II. Booting the images in /binary
+
+
+I. Building the meta-nuc BSP layer
+=========================================
+
+In order to build an image with BSP support for a given release, you
+need to download the corresponding BSP tarball from the 'Board Support
+Package (BSP) Downloads' page of the Yocto Project website.
+
+Having done that, and assuming you extracted the BSP tarball contents
+at the top-level of your yocto build tree, you can build a nuc
+image by adding the location of the meta-nuc layer to
+bblayers.conf, along with the meta-intel layer itself (to access
+common metadata shared between BSPs) e.g.:
+
+  yocto/meta-intel \
+  yocto/meta-intel/meta-nuc \
+
+To enable the nuc layer, add the nuc MACHINE to local.conf:
+
+  MACHINE ?= "nuc"
+
+You should then be able to build a nuc image as such:
+
+  $ source oe-init-build-env
+  $ bitbake core-image-sato
+
+At the end of a successful build, you should have a live image that
+you can boot from a USB flash drive (see instructions on how to do
+that below, in the section 'Booting the images from /binary').
+
+NOTE: The 'nuc' machine will include support for hardware video
+acceleration via gstreamer if and only if the "commercial" string is
+added to the the LICENSE_FLAGS_WHITELIST variable in your local.conf.
+
+For example:
+
+  LICENSE_FLAGS_WHITELIST = "commercial"
+
+The reason this is needed is to prevent the image from including
+anything that might violate the license terms of the packages used to
+implement the the video acceleration feature, such as gst-ffmpeg and
+ffmpeg.  As always, please consult the licenses included in the
+specific packages for details if you use packages that require
+particular LICENSE_FLAGS.
+
+As an alternative to downloading the BSP tarball, you can also work
+directly from the meta-intel git repository.  For each BSP in the
+'meta-intel' repository, there are multiple branches, one
+corresponding to each major release starting with 'laverne' (0.90), in
+addition to the latest code which tracks the current master (note that
+not all BSPs are present in every release).  Instead of extracting a
+BSP tarball at the top level of your yocto build tree, you can
+equivalently check out the appropriate branch from the meta-intel
+repository at the same location.
+
+
+II. Booting the images in /binary
+=================================
+
+This BSP contains bootable live images, which can be used to directly
+boot Yocto off of a USB flash drive.
+
+Under Linux, insert a USB flash drive.  Assuming the USB flash drive
+takes device /dev/sdf, use dd to copy the live image to it.  For
+example:
+
+# dd if=core-image-sato-nuc-20101207053738.hddimg of=/dev/sdf
+# sync
+# eject /dev/sdf
+
+This should give you a bootable USB flash device.  Insert the device
+into a bootable USB socket on the target, and power on.  This should
+result in a system booted to the Sato graphical desktop.
+
+If you want a terminal, use the arrows at the top of the UI to move to
+different pages of available applications, one of which is named
+'Terminal'.  Clicking that should give you a root terminal.
+
+If you want to ssh into the system, you can use the root terminal to
+ifconfig the IP address and use that to ssh in.  The root password is
+empty, so to log in type 'root' for the user name and hit 'Enter' at
+the Password prompt: and you should be in.
+
+----
+
+If you find you're getting corrupt images on the USB (it doesn't show
+the syslinux boot: prompt, or the boot: prompt contains strange
+characters), try doing this first:
+
+# dd if=/dev/zero of=/dev/sdf bs=1M count=512