1 files changed, 0 insertions, 140 deletions

diff --git a/meta-crownbay/README b/meta-crownbay/README
deleted file mode 100644
index 03dafb40..00000000
--- a/meta-crownbay/README
+++ /dev/null
@@ -1,140 +0,0 @@
-This README file contains information on building the meta-crownbay
-BSP layer, and booting the images contained in the /binary directory.
-Please see the corresponding sections below for details.
-
-The Crown Bay platform consists of the Intel Atom E6xx processor,
-plus the Intel EG20T Platform Controller Hub (Tunnel Creek + Topcliff).
-
-Further information on the platforms supported by this BSP can be
-found here:
-
-  http://www.intel.com/p/en_US/embedded/hwsw/hardware/atom-e6xx/overview
-
-And information on all Intel® embedded platforms can be found here:
-
-  http://www.intel.com/p/en_US/embedded/hwsw/hardware
-
-
-Yocto Project Compatible
-========================
-
-This BSP is compatible with the Yocto Project as per the requirements
-listed here:
-
-  https://www.yoctoproject.org/webform/yocto-project-compatible-registration
-
-
-Dependencies
-============
-
-This layer depends on:
-
-  URI: git://git.openembedded.org/bitbake
-  branch: master
-
-  URI: git://git.openembedded.org/openembedded-core
-  layers: meta
-  branch: master
-
-  URI: git://git.yoctoproject.org/meta-intel
-  layers: intel
-  branch: master
-
-
-Patches
-=======
-
-Please submit any patches against this BSP to the meta-intel mailing list
-(meta-intel@yoctoproject.org) and cc: the maintainer:
-
-Maintainer: Saul Wold <sgw@linux.intel.com>
-
-Please see the meta-intel/MAINTAINERS file for more details.
-
-
-Table of Contents
-=================
-
-  I. Building the meta-crownbay BSP layer
- II. Booting the images in /binary
-
-
-I. Building the meta-crownbay BSP layer
-=======================================
-
-In order to build an image with BSP support for a given release, you
-need to download the corresponding BSP tarball from the 'Board Support
-Package (BSP) Downloads' page of the Yocto Project website.
-
-Having done that, and assuming you extracted the BSP tarball contents
-at the top-level of your yocto build tree, you can build a crownbay
-image by adding the location of the meta-crownbay layer to
-bblayers.conf, along with the meta-intel layer itself (to access
-common metadata shared between BSPs) e.g.:
-
-  yocto/meta-intel \
-  yocto/meta-intel/meta-crownbay \
-
-The meta-crownbay layer contains support for the crownbay-noemgd machine
-configuration. The previously supported crownbay machine with the
-proprietary EMGD graphics driver has been retired. The 'crownbay-noemgd'
-machine configuration uses the open source 'vesa' kernel driver.
-
-To enable the layer add the following to the local.conf file:
-
-  MACHINE ?= "crownbay-noemgd"
-
-You should then be able to build a crownbay image as such:
-
-  $ source oe-init-build-env
-  $ bitbake core-image-sato
-
-At the end of a successful build, you should have a live image that
-you can boot from a USB flash drive (see instructions on how to do
-that below, in the section 'Booting the images from /binary').
-
-As an alternative to downloading the BSP tarball, you can also work
-directly from the meta-intel git repository.  For each BSP in the
-'meta-intel' repository, there are multiple branches, one
-corresponding to each major release starting with 'laverne' (0.90), in
-addition to the latest code which tracks the current master (note that
-not all BSPs are present in every release).  Instead of extracting
-a BSP tarball at the top level of your yocto build tree, you can
-equivalently check out the appropriate branch from the meta-intel
-repository at the same location.
-
-
-II. Booting the images in /binary
-=================================
-
-This BSP contains bootable live images, which can be used to directly
-boot Yocto off of a USB flash drive.
-
-Under Linux, insert a USB flash drive.  Assuming the USB flash drive
-takes device /dev/sdf, use dd to copy the live image to it.  For
-example:
-
-# dd if=core-image-sato-crownbay-noemgd.hddimg of=/dev/sdf
-# sync
-# eject /dev/sdf
-
-This should give you a bootable USB flash device.  Insert the device
-into a bootable USB socket on the target, and power on.  This should
-result in a system booted to the Sato graphical desktop.
-
-If you want a terminal, use the arrows at the top of the UI to move to
-different pages of available applications, one of which is named
-'Terminal'.  Clicking that should give you a root terminal.
-
-If you want to ssh into the system, you can use the root terminal to
-ifconfig the IP address and use that to ssh in.  The root password is
-empty, so to log in type 'root' for the user name and hit 'Enter' at
-the Password prompt: and you should be in.
-
-----
-
-If you find you're getting corrupt images on the USB (it doesn't show
-the syslinux boot: prompt, or the boot: prompt contains strange
-characters), try doing this first:
-
-# dd if=/dev/zero of=/dev/sdf bs=1M count=512