meta-crystalforest: Crystal Forest BSP Created.1.3_M4.rc11.3_M4

Initial checkin for the new Crystal Forest BSP.
This BSP is based on Sandybridge CPU and Cave Creek Chipset.

Signed-off-by: Kishore Bodke <kishore.k.bodke@intel.com>

1 files changed, 139 insertions, 0 deletions

diff --git a/meta-crystalforest/README b/meta-crystalforest/README
new file mode 100644
index 00000000..7b88b224
--- /dev/null
+++ b/meta-crystalforest/README
@@ -0,0 +1,139 @@
+This README file contains information on building the meta-crystalforest
+BSP layer, and booting the images contained in the /binary directory.
+Please see the corresponding sections below for details.
+
+The 'Crystal Forest' platform consists of two versions.
+1. STARGO
+2. SHUMWAY
+
+Stargo Platform is based on Intel Sandy Bridge Gladden Processor,plus the Cave Creek chipset.  
+Shumway Platform is based on two Intel Sandy Bridge (SNB-EP ES2 Grade and SNB-EN ES2 Grade)
+Processors plus two Cave Creek Chipsets.
+
+Both Platforms uses Matrox graphics Card.
+
+
+Dependencies
+============
+
+This layer depends on:
+
+  URI: git://git.openembedded.org/bitbake
+  branch: master
+
+  URI: git://git.openembedded.org/openembedded-core
+  layers: meta
+  branch: master
+
+  URI: git://git.yoctoproject.org/meta-intel
+  layers: intel
+  branch: master
+
+
+Patches
+=======
+
+Please submit any patches against this BSP to the Yocto mailing list
+(yocto@yoctoproject.org) and cc: the maintainer:
+
+Maintainer: Kishore Bodke <kishore.k.bodke@intel.com>
+
+Please see the meta-intel/MAINTAINERS file for more details.
+
+
+Table of Contents
+=================
+
+  I. Building the meta-crystalforest BSP layer
+ II. Booting the images in /binary
+
+
+I. Building the meta-crystalforest BSP layer
+=======================================
+
+In order to build an image with BSP support for a given release, you
+need to download the corresponding BSP tarball from the 'Board Support
+Package (BSP) Downloads' page of the Yocto Project website.
+
+Having done that, and assuming you extracted the BSP tarball contents
+at the top-level of your yocto build tree, you can build a crystalforest
+image by adding the location of the meta-crystalforest layer to
+bblayers.conf, along with the meta-intel layer itself (to access
+common metadata shared between BSPs) e.g.:
+
+  yocto/meta-intel \
+  yocto/meta-intel/meta-crystalforest \
+
+To enable the Crystal Forest Stargo layer, add the crystalforest-stargo MACHINE to local.conf:
+
+  MACHINE ?= "crystalforest-stargo"
+
+To enable the Crystal Forest Shumway layer, add the crystalforest-shumway MACHINE to local.conf:
+
+  MACHINE ?= "crystalforest-shumway"
+
+
+You should then be able to build a crystalforest image as such:
+
+  $ source oe-init-build-env
+  $ bitbake core-image-sato
+
+At the end of a successful build, you should have a live image that
+you can boot from a USB flash drive (see instructions on how to do
+that below, in the section 'Booting the images from /binary').
+
+As an alternative to downloading the BSP tarball, you can also work
+directly from the meta-intel git repository.  For each BSP in the
+'meta-intel' repository, there are multiple branches, one
+corresponding to each major release starting with 'laverne' (0.90), in
+addition to the latest code which tracks the current master (note that
+not all BSPs are present in every release).  Instead of extracting a
+BSP tarball at the top level of your yocto build tree, you can
+equivalently check out the appropriate branch from the meta-intel
+repository at the same location.
+
+
+II. Booting the images in /binary
+=================================
+
+This BSP contains bootable live images, which can be used to directly
+boot Yocto off of a USB flash drive.
+
+Under Linux, insert a USB flash drive.  Assuming the USB flash drive
+takes device /dev/sdf, use dd to copy the live image to it.  For
+example:
+
+To boot the Stargo Platform:
+
+# dd if=core-image-sato-crystalforest-stargo-20120829033154.hddimg of=/dev/sdf
+# sync
+# eject /dev/sdf
+
+To boot the Shumway Platform:
+
+# dd if=core-image-sato-crystalforest-shumway-20120829044852.hddimg of=/dev/sdf
+# sync
+# eject /dev/sdf
+
+This should give you a bootable USB flash device.  Insert the device
+into a bootable USB socket on the target, and power on.  This should
+result in a system booted to the Sato graphical desktop.
+
+If you want a terminal, use the arrows at the top of the UI to move to
+different pages of available applications, one of which is named
+'Terminal'.  Clicking that should give you a root terminal.
+
+If you want to ssh into the system, you can use the root terminal to
+ifconfig the IP address and use that to ssh in.  The root password is
+empty, so to log in type 'root' for the user name and hit 'Enter' at
+the Password prompt: and you should be in.
+
+----
+
+If you find you're getting corrupt images on the USB (it doesn't show
+the syslinux boot: prompt, or the boot: prompt contains strange
+characters), try doing this first:
+
+# dd if=/dev/zero of=/dev/sdf bs=1M count=512
+
+