1 files changed, 298 insertions, 0 deletions

diff --git a/meta-openstack/recipes-devtools/python/python-neutron/ml2/openvswitch_agent.ini.sample b/meta-openstack/recipes-devtools/python/python-neutron/ml2/openvswitch_agent.ini.sample
new file mode 100644
index 0000000..5b45b09
--- /dev/null
+++ b/meta-openstack/recipes-devtools/python/python-neutron/ml2/openvswitch_agent.ini.sample
@@ -0,0 +1,298 @@
+[DEFAULT]
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default
+# INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to any
+# existing logging configuration files. For details about logging configuration
+# files, see the Python logging module documentation. Note that when logging
+# configuration files are used then all logging configuration is set in the
+# configuration file and other logging configuration options are ignored (for
+# example, logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set. (string
+# value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set,
+# logging will go to stderr as defined by use_stderr. This option is ignored if
+# log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths. This option
+# is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or
+# removed this handler will open a new log file with specified path
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you may wish
+# to enable journal support. Doing so will use the journal native protocol
+# which includes structured metadata in addition to log messages.This option is
+# ignored if log_config_append is set. (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is
+# set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string
+# value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored
+# if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string
+# value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string
+# value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
+# or empty string. Logs with level greater or equal to rate_limit_except_level
+# are not filtered. An empty string means that all levels are filtered. (string
+# value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+
+[agent]
+
+#
+# From neutron.ml2.ovs.agent
+#
+
+# The number of seconds the agent will wait between polling for local device
+# changes. (integer value)
+#polling_interval = 2
+
+# Minimize polling by monitoring ovsdb for interface changes. (boolean value)
+#minimize_polling = true
+
+# The number of seconds to wait before respawning the ovsdb monitor after
+# losing communication with it. (integer value)
+#ovsdb_monitor_respawn_interval = 30
+
+# Network types supported by the agent (gre and/or vxlan). (list value)
+#tunnel_types =
+
+# The UDP port to use for VXLAN tunnels. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#vxlan_udp_port = 4789
+
+# MTU size of veth interfaces (integer value)
+#veth_mtu = 9000
+
+# Use ML2 l2population mechanism driver to learn remote MAC and IPs and improve
+# tunnel scalability. (boolean value)
+#l2_population = false
+
+# Enable local ARP responder if it is supported. Requires OVS 2.1 and ML2
+# l2population driver. Allows the switch (when supporting an overlay) to
+# respond to an ARP request locally without performing a costly ARP broadcast
+# into the overlay. (boolean value)
+#arp_responder = false
+
+# Set or un-set the don't fragment (DF) bit on outgoing IP packet carrying
+# GRE/VXLAN tunnel. (boolean value)
+#dont_fragment = true
+
+# Make the l2 agent run in DVR mode. (boolean value)
+#enable_distributed_routing = false
+
+# Set new timeout in seconds for new rpc calls after agent receives SIGTERM. If
+# value is set to 0, rpc timeout won't be changed (integer value)
+#quitting_rpc_timeout = 10
+
+# Reset flow table on start. Setting this to True will cause brief traffic
+# interruption. (boolean value)
+#drop_flows_on_start = false
+
+# Set or un-set the tunnel header checksum  on outgoing IP packet carrying
+# GRE/VXLAN tunnel. (boolean value)
+#tunnel_csum = false
+
+# DEPRECATED: Selects the Agent Type reported (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#agent_type = Open vSwitch agent
+
+# Extensions list to use (list value)
+#extensions =
+
+
+[ovs]
+
+#
+# From neutron.ml2.ovs.agent
+#
+
+# Integration bridge to use. Do not change this parameter unless you have a
+# good reason to. This is the name of the OVS integration bridge. There is one
+# per hypervisor. The integration bridge acts as a virtual 'patch bay'. All VM
+# VIFs are attached to this bridge and then 'patched' according to their
+# network connectivity. (string value)
+#integration_bridge = br-int
+
+# Tunnel bridge to use. (string value)
+#tunnel_bridge = br-tun
+
+# Peer patch port in integration bridge for tunnel bridge. (string value)
+#int_peer_patch_port = patch-tun
+
+# Peer patch port in tunnel bridge for integration bridge. (string value)
+#tun_peer_patch_port = patch-int
+
+# IP address of local overlay (tunnel) network endpoint. Use either an IPv4 or
+# IPv6 address that resides on one of the host network interfaces. The IP
+# version of this value must match the value of the 'overlay_ip_version' option
+# in the ML2 plug-in configuration file on the neutron server node(s). (IP
+# address value)
+#local_ip = <None>
+
+# Comma-separated list of <physical_network>:<bridge> tuples mapping physical
+# network names to the agent's node-specific Open vSwitch bridge names to be
+# used for flat and VLAN networks. The length of bridge names should be no more
+# than 11. Each bridge must exist, and should have a physical network interface
+# configured as a port. All physical networks configured on the server should
+# have mappings to appropriate bridges on each agent. Note: If you remove a
+# bridge from this mapping, make sure to disconnect it from the integration
+# bridge as it won't be managed by the agent anymore. (list value)
+#bridge_mappings =
+
+# Use veths instead of patch ports to interconnect the integration bridge to
+# physical networks. Support kernel without Open vSwitch patch port support so
+# long as it is set to True. (boolean value)
+#use_veth_interconnection = false
+
+# DEPRECATED: OpenFlow interface to use. (string value)
+# Allowed values: ovs-ofctl, native
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#of_interface = native
+
+# OVS datapath to use. 'system' is the default value and corresponds to the
+# kernel datapath. To enable the userspace datapath set this value to 'netdev'.
+# (string value)
+# Allowed values: system, netdev
+#datapath_type = system
+
+# OVS vhost-user socket directory. (string value)
+#vhostuser_socket_dir = /var/run/openvswitch
+
+# Address to listen on for OpenFlow connections. Used only for 'native' driver.
+# (IP address value)
+#of_listen_address = 127.0.0.1
+
+# Port to listen on for OpenFlow connections. Used only for 'native' driver.
+# (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#of_listen_port = 6633
+
+# Timeout in seconds to wait for the local switch connecting the controller.
+# Used only for 'native' driver. (integer value)
+#of_connect_timeout = 30
+
+# Timeout in seconds to wait for a single OpenFlow request. Used only for
+# 'native' driver. (integer value)
+#of_request_timeout = 10
+
+# The interface for interacting with the OVSDB (string value)
+# Allowed values: vsctl, native
+#ovsdb_interface = native
+
+# The connection string for the OVSDB backend. Will be used by ovsdb-client
+# when monitoring and used for the all ovsdb commands when native
+# ovsdb_interface is enabled (string value)
+#ovsdb_connection = tcp:127.0.0.1:6640
+
+
+[securitygroup]
+
+#
+# From neutron.ml2.ovs.agent
+#
+
+# Driver for security groups firewall in the L2 agent (string value)
+#firewall_driver = <None>
+
+# Controls whether the neutron security group API is enabled in the server. It
+# should be false when using no security groups or using the nova security
+# group API. (boolean value)
+#enable_security_group = true
+
+# Use ipset to speed-up the iptables based security groups. Enabling ipset
+# support requires that ipset is installed on L2 agent node. (boolean value)
+#enable_ipset = true
+
+
+[xenapi]
+
+#
+# From neutron.ml2.xenapi
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = <None>
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>