Extract list of targets from manifest, instead of hardcoded

This list was hardcoded in Makefile before.
Do this by cloning the manifest repo to see the targets.
Support both ref/tags/<tag> and hashvalue
i.e. same as the repo command supports.

Signed-off-by: Lennart Johansson <lennart.johansson@enea.com>

2 files changed, 71 insertions, 41 deletions

diff --git a/doc/Makefile b/doc/Makefile
index f48112d..c7569e9 100644
--- a/doc/Makefile
+++ b/doc/Makefile
@@ -2,12 +2,12 @@
 SUBSYSROOT := $(shell pwd)
 
 # NOTE: MANIFESTHASH in manifest_conf.mk needs to be the final release tag before a release
-#       The manifest_conf.mk defines MANIFESTHASH and MANIFESTURL and PROFILE_NAME
+#       The manifest_conf.mk defines MANIFESTHASH and MANIFESTURL and PROFILE_NAME(on front+footers)
 include manifest_conf.mk
+MANIFESTDIR := $(shell echo "$(MANIFESTURL)" | sed 's/.*\///;s/\.git//')
 
-# An alternative is to clone the manifest repository and extract the list of target manifest files from that
+# Further down we extract the list of target manifest file names from the manifest itself
 # We need all to get all README, but only first in alphabetic list is used to extract info from poky/
-TARGETDEFAULTXMLS := ls1021aiot/default.xml p2041rdb/default.xml qemuarm/default.xml qemuppc/default.xml qemux86/default.xml
 
 
 # ***************** Generic docbuild.git auto-clone + s_docbuild symlink ***
@@ -22,6 +22,7 @@ NAME_TARGETS       := targets
 DOCBASEDIR=$(shell pwd)
 REPODIR=$(DOCBASEDIR)/..
 TMPCLONEROOT_TARGETS := $(TMPCLONEROOT)/$(NAME_TARGETS)
+TMPCLONEROOT_MANIFEST := $(TMPCLONEROOT)/manifest
 
 
 # ******************* AutoGenerated chapter from template and target READMEs *******
@@ -70,29 +71,34 @@ VALIDATE = no
 # Export all parameters including those on the command line
 export
 
-.PHONY: doc books docusage init initbuild inittargets initpardoc initbuildboot dist
+.PHONY: doc books docusage init initbuild initmanifest inittargets initpardoc initbuildboot dist
 
 
 docusage:
         @echo 'make docusage                  #Shows this help text'
         @echo '  DOCBOOK_TOOLS_VERSIONS=yes   #Displays DocBook tools versions in this machine'
-        @echo 'make doc                       #Builds the userdoc, does automatically also init if needed'
-        @echo 'make dist BOOK_DIST_DIR=xx/doc #Builds doc and copies results to BOOK_DIST_DIR'
-        @echo '                               #Does not work with DOCBOOK_TO_BOOKDIR or BOOK_BUILD_DIR'
-        @echo '                               #Currently EclipseHelp formated doc will not be in BOOK_DIST_DIR'
+        @echo 'make doc                       #Builds doc. ALSO automatically does all inits if needed'
+        @echo 'make dist BOOK_DIST_DIR=xx/doc #Builds doc as above and copies results to BOOK_DIST_DIR'
+        @echo '                               #   Does not work with DOCBOOK_TO_BOOKDIR or BOOK_BUILD_DIR'
+        @echo ' BOOK_DIST_ECLIPSE=yes         #Currently EclipseHelp formated doc will not be in BOOK_DIST_DIR'
         @echo '                               #   unless BOOK_DIST_ECLIPSE is set to yes'
         @echo 'make init                      #Init all needed init* below'
         @echo 'make initbuild                 #Init s_docbuild Docbook build system and central files'
-        @echo 'make inittargets               #Init s_targets using repo tool Targets in this distro with poky'
-        @echo 'make initpardoc                #Init s_docsrc_common using info from poky/'
+        @echo 'make initmanifest              #Init s_manifest by cloning, to detect which targets are included'
+        @echo 'make inittargets               #Init s_targets using repo tool. Targets in this distro with poky'
+        @echo 'make initpardoc                #Init s_docsrc_common with extracted parameters/'
         @echo 'make initbuildboot             #Init build_boot chapter from READMEs and template in release info'
+        @echo 'make initissues                #Init known issues section from Jira'
+        @echo ' MANIFESTHASH=xxxxx            #Option for all inits above to use nondefault manifest version'
+        @echo '                               #It shall either be ref/tags/<tagvalue> or a hashvalue'
+        @echo '                               #Configured tag or hashvalue $(MANIFESTHASH)'
+        @echo '                               #Configured MANIFESTURL      $(MANIFESTURL)'
+        @echo '                               #Configured PROFILE_NAME     $(PROFILE_NAME)'
         @echo ' DOCBOOK_CLEANTMP=no           #Option to keep temp files in doc/ and tmp/'
         @echo ' BOOK_GLOBALCLONEROOT=yes      #Option for all init above to clone all outside the doc directory'
         @echo ' BOOK_GLOBALCLONEROOT=otherpath #Option for all init above to clone all to given path'
-        @echo ' MANIFESTHASH=xxxxx            #Option for all init above to use nondefault MANIFEST in repo cmd'
         @echo 'make pullbuild                 #git pull in s_docbuild'
-        @echo 'make pulltargets               #git pull in s_targets. You need also initpardoc initbuildboot'
-        @echo 'make clean                     #Clean. Also clean s_* but not any external clones'
+        @echo 'make clean                     #Clean results and all s_*, but not any external clones'
         @echo ''
         @echo 'Optional parameters for make doc:'
         @echo '  COMP=<book-directory>     #Component (book) to build. Book component names are book-*'
@@ -121,7 +127,7 @@ docusage:
         @echo '     make doc COMP=book-xxxx FORMAT=html'
         @echo '     make doc COMP=book-xxxx FORMAT=pdf'
         @echo '     make doc BL_LABEL="Version 1.2.3"  Creates all with version in footers and front'
-
+        @echo ''
         @echo '  Requires docbook-xsl-1.76.1 or later, docbook-xml 4.2, svg1.1, fop-1.0 + fop-hyph.jar'
         @echo '     fop + the separate fop-hyph can be found together in package "libfop-java"'
         @echo '     otherwise fetch fop-hyph.jar and place in same place as fop.jar'
@@ -135,8 +141,8 @@ ifeq ($(DOCBOOK_TOOLS_VERSIONS),yes)
 endif
 
 # We rely on make doing these in order left to right
-init: initbuild inittargets initpardoc initbuildboot initpkgdiff initissues
-pullall: pullbuild pulltargets
+init: initbuild initmanifest inittargets initpardoc initbuildboot initpkgdiff initissues
+pullall: pullbuild
 
 # If no COMP, iterate over books-* in COMPONENTS with make doc
 ifeq ($(COMP),)
@@ -193,8 +199,9 @@ ifeq ($(DOCBOOK_CLEANTMP),yes)
 endif
 endif
 
-# cleaninit cleans ALL tmpcommon and all s_* and generated build_boot chapter xml
+# cleaninit cleans ALL tmpcommon and all s_*
 clean:  cleaninit cleanbuildboot cleanpkgdiff cleanissues
+        @echo "Cleaning build results and temporary files"
         $(VERB)rm -rf doc tmp 2>/dev/null
 ifneq ($(filter book-%, $(COMPONENTS)),)
         $(VERB)for comp in $(filter book-%, $(COMPONENTS)); do \
@@ -206,26 +213,45 @@ endif
 
 # ******************************************************************
 # ****************** SUPPORT FOR TARGETS ***************************
+initmanifest: s_manifest
 inittargets:  s_targets
-pulltargets:
-        $(VERB)if [ ! -d s_targets ]; then echo "ERROR: No s_targets exists?" ; exit 10 ; fi
-        $(VERB)cd s_targets; for targ in *; do ( cd $targ ; git pull )
 
 
 # -----------------------------------------
+# We only clone the manifest to be able to autodetect which targets are in it
+# git clone requires only the tag string e.g. EL6, not the entire ref/tags/EL6 that repo requires
+# git clone -b hashvalue is not supported. We must first clone, then git checkout hashvalue
+#     These steps work also for a tag so we could use the same stepwise code
+
+s_manifest: $(TMPCLONEROOT_MANIFEST)
+        $(VERB)rm s_manifest 2>/dev/null; ln -s $(TMPCLONEROOT_MANIFEST) s_manifest
 
-# Use repo to auto-clone each target separately - VERY LARGE if there are many targets (5 targets => about 1.3 Gytes)
+$(TMPCLONEROOT_MANIFEST):
+        $(VERB)if [ ! -d "$(TMPCLONEROOT)" ] ; then mkdir -p "$(TMPCLONEROOT)" ; fi
+        $(VERB)if [ ! -d "$(TMPCLONEROOT_MANIFEST)" ]; then mkdir -p "$(TMPCLONEROOT_MANIFEST)" ; fi
+        $(VERB) MBRANCH=`echo "$(MANIFESTHASH)" | sed 's/.*\///'`; \
+           echo "**** Cloning manifest version $$MBRANCH of $(MANIFESTURL) in $(TMPCLONEROOT_MANIFEST)" ; \
+           cd "$(TMPCLONEROOT_MANIFEST)"; git clone $(MANIFESTURL) ; cd $(MANIFESTDIR) ; git checkout $(MANIFESTHASH)
+        $(VERB)if [ ! -d "$(TMPCLONEROOT_MANIFEST)/$(MANIFESTDIR)" ]; then echo "ERROR: Missing $(TMPCLONEROOT_MANIFEST)/$(MANIFESTDIR)"; exit 10 ; fi ; \
+           TARGETDEFAULTXMLS=`cd $(TMPCLONEROOT_MANIFEST)/$(MANIFESTDIR); ls -1 */default.xml 2>/dev/null` ; \
+           echo "$$TARGETDEFAULTXMLS" | tr '\n' ' ' >$(TMPCLONEROOT_MANIFEST)/targetdefaultxmls.txt ; \
+           echo "$$TARGETDEFAULTXMLS" | sed 's/\/.*//' | tr '\n' ' ' >$(TMPCLONEROOT_MANIFEST)/targetids.txt
+
+# -----------------------------------------
+# Use repo to auto-clone each target separately - VERY LARGE if there are many targets (5 targets => about 1.3 Gbytes)
 
 s_targets: $(TMPCLONEROOT_TARGETS)
         $(VERB)rm s_targets 2>/dev/null; ln -s $(TMPCLONEROOT_TARGETS) s_targets
 
 
-$(TMPCLONEROOT_TARGETS):
+$(TMPCLONEROOT_TARGETS): s_manifest
         $(VERB)if [ ! -d "$(TMPCLONEROOT)" ] ; then mkdir -p "$(TMPCLONEROOT)" ; fi
         $(VERB)if [ ! -d $(TMPCLONEROOT_TARGETS) ]; then mkdir -p $(TMPCLONEROOT_TARGETS) ; fi
         @echo "**** Cloning all targets using repo tool into $(TMPCLONEROOT_TARGETS)"
-        @echo "TARGETDEFAULTXMLS is <$(TARGETDEFAULTXMLS)>"
-        $(VERB)for target_default_xml in $(TARGETDEFAULTXMLS); \
+        $(VERB)if [ ! -f "$(TMPCLONEROOT_MANIFEST)/targetdefaultxmls.txt" ]; then echo "ERROR: Missing $(TMPCLONEROOT_MANIFEST)/targetdefaultxmls.txt"; exit 10; fi
+        $(VERB)TARGETDEFAULTXMLS=`cat "$(TMPCLONEROOT_MANIFEST)/targetdefaultxmls.txt" 2>/dev/null` ; \
+         echo "Info: TARGETDEFAULTXMLS is $$TARGETDEFAULTXMLS" ; \
+         for target_default_xml in $$TARGETDEFAULTXMLS; \
           do \
             TARGDIR=$(TMPCLONEROOT_TARGETS)/`dirname $$target_default_xml` ; \
             echo "TARGDIR=<$$TARGDIR>" ; \
@@ -248,6 +274,7 @@ TMPPARDOC                  := $(TMPCLONEROOT_DOCSRC_COMMON)/pardoc-distro.xml
 initpardoc:   s_docsrc_common
 
 cleanpardoc:
+        @echo "Cleaning dynamic parameters"
         $(VERB)rm -rf $(TMPCLONEROOT_DOCSRC_COMMON) ; rm s_docsrc_common
 
 s_docsrc_common:  $(TMPCLONEROOT_DOCSRC_COMMON)
@@ -258,8 +285,10 @@ $(TMPCLONEROOT_DOCSRC_COMMON): s_targets
         $(VERB)if [ ! -d $(TMPCLONEROOT_DOCSRC_COMMON) ]; then mkdir -p $(TMPCLONEROOT_DOCSRC_COMMON) ; fi
         @echo "**** Copy and patch docsrc_common/ files to $(TMPCLONEROOT_DOCSRC_COMMON)"
         @echo "*** Add parameters from first target's enea.conf and add manifest parameters"
-        $(VERB)FIRSTTARGET=`ls -1 s_targets/ | head -1`; \
+        $(VERB)FIRSTTARGET=`ls -1 s_targets/ 2>/dev/null | head -1`; \
+          if [ "$$FIRSTTARGET" = "" ]; then echo "ERROR: No targets?" ; exit 10; fi ; \
           ENEACONF=s_targets/$$FIRSTTARGET/poky/meta-el-common/conf/distro/enea.conf ; \
+          if [ ! -f "$$ENEACONF" ]; then echo "ERROR: No  $$ENEACONF?" ; exit 10; fi ; \
           DISTRO_VERSION_MAJOR=`egrep '^DISTRO_VERSION_MAJOR' $$ENEACONF | sed 's/^[^"]*"//;s/".*//'` ; \
           DISTRO_VERSION_MINOR=`egrep '^DISTRO_VERSION_MINOR' $$ENEACONF | sed 's/^[^"]*"//;s/".*//'` ; \
           cat docsrc_common/pardoc-distro.xml | sed '/<\/section>/d' | \
@@ -278,6 +307,7 @@ $(TMPCLONEROOT_DOCSRC_COMMON): s_targets
 initbuildboot: $(BUILDBOOT_XML)
 
 cleanbuildboot:
+        @echo "Cleaning generated build-boot command document file"
         $(VERB)rm -f $(BUILDBOOT_XML) 2>/dev/null
 
 
@@ -296,6 +326,7 @@ $(BUILDBOOT_XML): s_targets $(BUILDBOOT_TEMPLATE)
 initpkgdiff: $(PKGDIFF_GEN_XML)
 
 cleanpkgdiff:
+        @echo "Cleaning generated package diff document file"
         $(VERB)rm -f $(PKGDIFF_GEN_XML) 2>/dev/null
 
 $(PKGDIFF_GEN_XML):
@@ -313,6 +344,7 @@ $(PKGDIFF_GEN_XML):
 initissues: $(JIRA_ISSUES_GEN_XML)
 
 cleanissues:
+        @echo "Cleaning generated known issues document file"
         $(VERB)rm -f $(JIRA_ISSUES_GEN_XML) 2>/dev/null
 
 $(JIRA_ISSUES_GEN_XML):
diff --git a/doc/book-enea-linux-release-info/doc/about_release.xml b/doc/book-enea-linux-release-info/doc/about_release.xml
index de80655..08a44a8 100644
--- a/doc/book-enea-linux-release-info/doc/about_release.xml
+++ b/doc/book-enea-linux-release-info/doc/about_release.xml
@@ -167,19 +167,16 @@
           <row>
             <entry>Poky</entry>
 
-            <entry>
-              <para>Git commit id:</para>
-              <para>75ca53211488a3e268037a44ee2a7ac5c7181bd2</para>
-            </entry>
-
-            <remark>
-            The auto-fetched version is not correct unless the EL release is
-            based on a Yocto release tag.
-            <entry><xi:include href="../../s_docsrc_common/pardoc-distro.xml"
+            <entry><para>Git commit id:</para>
+            <para>75ca53211488a3e268037a44ee2a7ac5c7181bd2</para><remark>Problem:
+            Unfortunately the poky version in poky.ent is not correct unless
+            the EL release would be based on a Yocto release, so we can not
+            use that here. This is a problem because we don't want to manually
+            edit the git commit ID in this file? The poky version in poky.ent
+            is just now <xi:include
+            href="../../s_docsrc_common/pardoc-distro.xml"
             xmlns:xi="http://www.w3.org/2001/XInclude"
-            xpointer="element(Poky_VER/1)" /><remark>INFO: Auto-fetched from
-            poky.ent via pardoc-distro.xml</remark></entry>
-            </remark>
+            xpointer="element(Poky_VER/1)" /></remark></entry>
           </row>
 
           <row>
@@ -459,13 +456,14 @@
       </listitem>
 
       <listitem>
-        <para><trademark class="registered">Enea</trademark> Linux 6 Test Report</para>
+        <para><trademark class="registered">Enea</trademark> Linux 6 Test
+        Report</para>
       </listitem>
 
       <listitem>
-        <para><trademark
-        class="registered">Enea</trademark> Linux Real-Time Guide can be read at
-        <ulink url="http://linuxrealtime.org">http://linuxrealtime.org</ulink>.</para>
+        <para><trademark class="registered">Enea</trademark> Linux Real-Time
+        Guide can be read at <ulink
+        url="http://linuxrealtime.org">http://linuxrealtime.org</ulink>.</para>
       </listitem>
     </itemizedlist>
   </section>