summaryrefslogtreecommitdiffstats
path: root/meta/recipes-devtools/libtool/libtool
Commit message (Collapse)AuthorAgeFilesLines
* libtool: Update further patch status to backportRichard Purdie2024-01-193-3/+3
| | | | | | | | | Three further patches were merged to upstream libtool, update the patch status to Backport. (From OE-Core rev: 062a4afbe6efff1f52db61225401d549507a6f66) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: Update patch offsetsRichard Purdie2024-01-1910-28/+30
| | | | | | | | | Our patches were rather out of sync, update the line offsets to match the current patchset/underlying code. (From OE-Core rev: f3a98cbd1c17ec25593ac11149d81ab80156a101) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: Update cleanup sysroot handling patchRichard Purdie2024-01-192-19/+51
| | | | | | | | | | | | The sysroot path cleanup change was reworked after discussion/review upstream. It appeared there were two different changes in one of our patches so separate out the second one and mark as inappropriate as it is unlikely upstream would take such a change in defaults. We need further investigation to decide if OE really wants/needs this going forward. (From OE-Core rev: 1315f7ccaf2b1d5fb91e3c726447883058fb5ec3) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: Update prefixmap and clang patches to match upstream submissionRichard Purdie2024-01-192-24/+38
| | | | | | | | | The patches were submitted upstream and adjusted after discussion. Update to match the changes requested. (From OE-Core rev: d7644baaf99b5593b356c395b232088436ae2e30) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: Update nios2 patch to match upstream merged versionRichard Purdie2024-01-191-43/+38
| | | | | | | | Update the patch to match the version merged upstream. (From OE-Core rev: 918f665f440975f54e77b13bee8111de06aa7dca) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: Update patches to mark as backportsRichard Purdie2024-01-193-3/+3
| | | | | | | | Several patches merged upstream, mark as such. (From OE-Core rev: a15b73b9a6aebdf49829c2f749246943048620d5) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: Upgrade 2.4.6 -> 2.4.7Richard Purdie2022-03-2316-494/+101
| | | | | | | | | | | | Libtool made a release after many years. Update to it, allowing us to drop two backported patches. We also drop a performance optimistion patch since it is too invasive to maintain separately. (From OE-Core rev: b5d13cbdded0f71fd4b847066434d30e8a39c9ce) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: Recognise additional linker commandline options passed by clangKhem Raj2022-03-111-0/+37
| | | | | | | | | | Like stdlib, these options are also used to select runtime libraries by clang driver (From OE-Core rev: 6d2035b9017552f050e53add0b3ef4090141fc5e) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: don't prefix the installed binaryRoss Burton2021-12-121-98/+0
| | | | | | | | | | | | | | | | | | | | | | Typically libtool installs the binary to 'libtool' in the source tree, but we've got patches to rename this to ${host_sys}-libtool. As this isn't standard any upstream that don't respect the LIBTOOL variable need to be told explicitly where libtool is, which is a long-term maintenance burden for us on top of the initial libtool patches. The reasoning for this renaming appears to stem from the design to be sure that we're using our new/patched libtool and not the host's binary. However, now that we have HOSTTOOLS, there's no way to run the host libtool so this argument is moot. This patch removes the libtool renaming, follow-up patches remove the required modifications from the rest of the recipes. [RP: Remove commented patch lines] (From OE-Core rev: 4b308773eca7570ce5007e8f953b56252c17fdb1) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: change the default AR_FLAGS from "cru" to "cr"Li Wang2021-12-012-0/+210
| | | | | | | | | | | Backport patch to fix warning: `u' modifier ignored since `D' is the default (see `U') (From OE-Core rev: 3d5092e7ee63fb8119a22b3d9de1f23e94791b56) Signed-off-by: Li Wang <li.wang@windriver.com> Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: Update patchset to match those submitted upstreamRichard Purdie2021-10-2615-140/+127
| | | | | | | | | | | | | | | | I went through and cleaned up the headers/descriptions on several of the libtool patchset and submitted (or resubmitted in some cases) them upstream. This patch updates/renames them to match what I did. I did fix some whitespace issues in some of the patches and also merged one case where we had a patch of already patched code. This makes it clear what was submitted and makes resubmission easier if ever needed too. (From OE-Core rev: 9bb9a4e8bd408c7a42913aa3e1ec541919b59584) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: Fix lto option passing for reproducible buildsRichard Purdie2021-08-121-0/+22
| | | | | | | | | If lto is enabled, we need the prefix-map variables to be passed to the linker. Add these to the list of options libtool passes through. (From OE-Core rev: 2c26d2c00b47df856fb2d9c35486b135094d46ac) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: make sure autoheader run before automakeMingli Yu2021-04-181-0/+35
| | | | | | | | | | | | | | When use automake to generate Makefile.in from Makefile.am, there comes below race: | configure.ac:45: error: required file 'config-h.in' not found It is because the file config-h.in in updating process by autoheader, so make automake run after autoheader to avoid the above race. (From OE-Core rev: 1fc0a4a98e65db7efba8bb5cb835101ea5dd865b) Signed-off-by: Mingli Yu <mingli.yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: make sure autoheader run before autoconfMingli Yu2021-03-281-0/+35
| | | | | | | | | | | | | | autoheader will update ../libtool-2.4.6/libltdl/config-h.in which autoconf needs, so there comes a race sometimes as below: | configure.ac:45: error: required file 'config-h.in' not found | touch '../libtool-2.4.6/libltdl/config-h.in' So make sure autoheader run before autoconf to avoid this race. (From OE-Core rev: d8451cbef5906b67756582fdfc44eb01ed3512fc) Signed-off-by: Mingli Yu <mingli.yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: remove host information from libtoolJoe Slater2019-07-221-0/+21
| | | | | | | | | Import patch from Debian. (From OE-Core rev: b2e0b383a17a3cd450adb3d86f7f818729438375) Signed-off-by: Joe Slater <joe.slater@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: Fix ignoring compiler-rt libsKhem Raj2019-01-271-0/+37
| | | | | | | | | | This is a limitation of libtool where it is not aware of compiler-rt being a compiler internal library, this patch fixes it (From OE-Core rev: ebc96f2f612ebc1b7aefb06935bb308fc2e40cfd) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: Fix patch status tagRichard Purdie2018-08-011-1/+1
| | | | | | (From OE-Core rev: 28fc470e5e10ee9cce893d037ed5e518bc5612f5) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: Fix problem with libtoolize in multilib installationsRichard Purdie2018-07-311-0/+23
| | | | | | | | | | | | | | Without this patch /usr/bin/libtoolize is different for each multilib since their host-triplets are different, despite there being no difference in the functionality of libtoolize itself. This change just patches out the problematic line since its just a comment for the user in help text. Ugly but solves the problem. This fixes issues where libtool and libXX-libtool couldn't be installed into the same system. (From OE-Core rev: f70040fd3ca3508d33ed24c749c0b8095b020dab) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta: Add/fix missing Upstream-Status to patchesRichard Purdie2017-06-271-0/+2
| | | | | | | | | This adds or fixes the Upstream-Status for all remaining patches missing it in OE-Core. (From OE-Core rev: 563cab8e823c3fde8ae4785ceaf4d68a5d3e25df) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: Fix nios2 supportMarek Vasut2015-09-231-0/+68
| | | | | | | | | | Add patch to fix excessive greediness of OS/2 check in libtool. (From OE-Core rev: 1bd71e740b085d2e012b38ac5c04556d7f8561c4) Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: 2.4.5 -> 2.4.6Richard Purdie2015-02-171-71/+0
| | | | | | | | Drop patch merged upstream. (From OE-Core rev: cd03ef79b50ed42b9d407ee45fc3e3321385281c) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: don't execute automake and autoconf on every invocationRobert Yang2015-02-151-0/+71
| | | | | | | | | | | | | | | From the origin commit message: Regression from 2.4.2 was causing noticable slow-down in builds that call libtool many times. * build-aux/ltmain.in (func_help): Override func_help() from gl/build-aux/options-parser to only run automake --version and autoconf --version when libtool --help is executed on the command line. (From OE-Core rev: 9fd23c9ac03143b578559bb79995f2655c81ccc8) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Revert "libtool: avoid running automake/autoconf --version"Robert Yang2015-02-151-54/+0
| | | | | | | | | | | This reverts commit 1f53edeaf9ea59dd55459a6d5a93829fb4983839. There is a better fix on upstream, will backport it. (From OE-Core rev: 600c9bb271a47674876b029a6a58ffac08add8ed) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: Fix option parsing performance regressionRichard Purdie2015-02-101-0/+179
| | | | | | | | | | | Cut and paste the pieces of build-aux/options-parser inline into the main ltmain.sh code. This removes a performance degradation caused by the repeated calls to func_quote_for_eval, the mechanism funclib uses to construct the functions used for option parsing. (From OE-Core rev: 6bf5cbbcac80ee818cc932d69227e70e41ce02d3) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: avoid running automake/autoconf --versionRobert Yang2015-02-051-0/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The libtool would be very slow if run "automake/autoconf --version", for example, when compile xz-native (make -j1, only compile, no confiure or install): before patched: 19s after patched: 11s Use plain text to instead of running them. NOTE: it is still a little slower than libtool 2.4.2 when compile xz-native because of other parts: make -j1: about 2s slower make -j32: about 0.4s slower If we run to do_install: (PARALLEL_MAKE = "-j32") libtool 2.4.2: $ bitbake xz-native -cinstall && bitbake xz-native -ccleansstate && time bitbake xz-native -cinstall real 0m21.092s user 0m28.292s sys 0m3.932s libtool 2.4.5: $ bitbake xz-native -cinstall && bitbake xz-native -ccleansstate && time bitbake xz-native -cinstall real 0m21.380s user 0m31.140s sys 0m4.068s About 0.3s, slightly different. But when using /bin/bash as CONFIG_SHELL, the new libtool would be much slower: real 0m23.106s user 0m44.044s sys 0m4.280s About 2s slower, for the big package like cairo, it is more slower (about 6s), unfortunately, /bin/bash is most default CONFIG_SHELL for the recipes since configure checks first check bash. (From OE-Core rev: eb9d896db2fc67bac8efd258744d06fbbee87f06) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: Fix tools path issuesRichard Purdie2015-02-031-0/+27
| | | | | | | | | | | | | | | | If for example you build on a machine with /bin/grep, then restore that sstate onto a machine with /usr/bin/grep, things will fail. Simply don't bother hardcoding paths. This was lost during the libtool upgrade: http://git.yoctoproject.org/cgit.cgi/poky/diff/meta/recipes-devtools/libtool/libtool/avoid_absolute_paths_for_general_utils.patch?id=d4e1862453b2a4c12400de0f43f08a9871a4de60 since the path to the files changed. This restores the previous behaviour. (From OE-Core rev: e48c06264f183c3d611a20a45914e9eeaa8f3736) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: upgraded to 2.4.4Robert Yang2015-01-2312-258/+166
| | | | | | | | | | | | | | | | | | | | | | | | | | | * Upgrade: - libtool-native - libtool-cross - nativesdk-libtool - libtool * Remove 2 patches: - respect-fstack-protector.patch: already in the new source. - avoid_absolute_paths_for_general_utils.patch: no general.m4sh any more. - Use inline-source to install libtoolize. * Update other patches * The LIC_FILES_CHKSUM is changed because of the indent, the contents are the same. * The libtool config files are put in libtool/build-aux now, it was libtool/config in the past. (From OE-Core rev: 871dc461b1dfc431c0c95743af1624b781262bce) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: Extend fix-final-rpath.patchRandy Witt2014-10-241-2/+14
| | | | | | | | | | | | | | | When building upower from meta-oe, the following QA error occurred: ERROR: QA Issue: package upower contains bad RPATH It appears to have been caused by one of the cases fix-final-rpath.patch is meant to address but missed. So this change fixes the additional case that was causing upower to have the QA error. (From OE-Core rev: d2b2bb7cedb678c9f67ef1d9170fc427d9beee1e) Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: Don't patch generated filesRichard Purdie2013-09-301-660/+0
| | | | | | | | | | | We wipe out and regenerate all configure files so there is no point in patching them. (From OE-Core rev: 8d7036cdb71e66e619053c2545cfc1fbddf1895b) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: fix resolve of lt_sysrootHans Beckerus2013-09-171-0/+41
| | | | | | | | | | | | | | | | | | | | | | | | | This patch updates libtool.m4 (and its output) to resolve a problem with variable 'lt_sysroot' not being properly updated if the option '--with[-libtool]-sysroot' is not provided when running the 'configure' script for a package. According to the help text ouput from 'configure': --with-libtool-sysroot=DIR Search for dependent libraries within DIR (or the compiler's sysrooot if not specified). Due to mixed up cases in a switch statement, when checking if the option was specified or not, wrong actions were taken resulting in an incorrect sysroot and failures to properly locate e.g. .la files when using the populated SDK toolchain. For current upstream status see: http://lists.gnu.org/archive/html/bug-libtool/2013-09/msg00005.html (From OE-Core rev: f5cf7e1a5c85fb320faa9cbeef24f491706b4c1d) Signed-off-by: Hans Beckerus <hans.beckerus at gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: remove help2man dependencyMarko Lindqvist2013-01-072-21/+24
| | | | | | | | | | | | | | Remove manpage creation. It wasn't working because of help2man missing when libtool is being built. This attempt to create manpages without help2man turns from no-op to hard error with automake-1.13. Removed prefix-manpage-fix.patch as only code it touched is being removed by new dont-depend-on-help2man.patch (From OE-Core rev: 51a97cfb96ee2e5eeef978678fe6acdd498b9555) Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: update rpath normalization to use builtinAndy Ross2012-08-241-14/+8
| | | | | | | | | Use the built-in normalization function instead of the sed hack. (From OE-Core rev: ba8263e5dc520f5024fc76d8bd2e10fe0564b0e2) Signed-off-by: Andy Ross <andy.ross@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: normalize link paths before considering for RPATHAndy Ross2012-08-221-0/+42
| | | | | | | | | | | Libtool may be passed link paths of the form "/usr/lib/../lib", which fool its detection code into thinking it should be included as an RPATH in the generated binary. Normalize before comparision. (From OE-Core rev: e3b0925f4c861393e436deb6b1912f9f1f325d1e) Signed-off-by: Andy Ross <andy.ross@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: Let -fstack-protector passed to link stepKhem Raj2012-06-111-0/+53
| | | | | | | | | | | linker should add -lssp to linker cmdline when -fstack-protector therefore add this knowledge to libtool otherwise packages will fail to link (From OE-Core rev: d1756ff379ab310bfa6323d8643b7e9d764f94bf) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Fix Upstream-Status entriesSaul Wold2012-01-241-1/+1
| | | | | | | (From OE-Core rev: 0cd9314ef95168ba5452a01ed8d923585c8d54ae) Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: Upgrade from 2.4 -> 2.4.2Nitin A Kamble2011-12-019-189/+147
| | | | | | | | | | | | | | | Rebased patches to the newer source code and deleted resolve-sysroot.patch since its already applied upstream merged libtool-2.4.2.inc & libtool.inc files replaced PR with ${INC_PR}.0 (From OE-Core rev: aa0cb889a4ef883235dc3f3e1d76ee4a556ae03a) Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: Avoid relinking when cross compiling, its pointlessRichard Purdie2011-11-241-0/+101
| | | | | | | | | | | | | | | | | | | | There is no point in having "executable" binaries in the .libs directory linked with different rpaths to the target which could concivably be run on the build system when cross compiling. This patch removes the extra rpaths ($compile_rpath) so that the output from the "link" stage can be used on the target. We can then avoid having to "relink" during the install stage. This saves some build time (do_install is over 2 minutes faster for pulseaudio). This patch also removes an annoying "seems to be moved" warning which is totally bogus in the sysroot case. (From OE-Core rev: 0a1dedeb8eea4e230b47d1516b3e6e90495fe49d) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Allow use of dash as /bin/shRichard Purdie2011-11-101-1/+10
| | | | | | | | | | | | | | | | | | | | | | | We've had the check for dash as /bin/sh for a long time. Dash has been around long enough now that most major issues have been identified and fixed from build perspective. This patch fixes a bashism in the openjade-native recipe. It also adjusts libtool so that the header at the script is used and not the value of $SHELL. This is because many Makefiles change $SHELL so dash can get used to execute what is otherwise configured as a bash shell script. Since we don't need to execute scripts this way on any system I'm aware of us building upon, the simplest fix is just to remove $SHELL. With these two changes the dash check can be removed and we can allow builds with dash as /bin/sh (From OE-Core rev: 07ded02ffd37b4fe60a6210dbf56490ea306f0b6) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> [Note: I know I need to add the description of the libtool change above into the prefix.patch]
* libtool: Fix an issue where unnecessary rpaths were being injectedRichard Purdie2011-09-261-0/+63
| | | | | | | | | libtool was being to aggressive in adding rpath to binaries. This change stops it adding them if that path the default search path. (From OE-Core rev: 99d1e3ee56c326b3ab68913e68d133a63f334696) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gcc: remove unused patches and move patches in proper dirNitin A Kamble2011-05-183-3/+3
| | | | | | | | | | | | | | | | | | | | | gcc: update upstream-status for patches python: update upstream-status for patches libtool: update upstream-status of patches m4: update upstream status for patches eglibc: remove unused patches eglibc: update upstream status of patches glibc: update upstream-status of patches & remove unused patches (From OE-Core rev: d10df0e5a363fe8b305ffac7e8ac231da8e07552) Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* recipes: Update upstream-status of patchesNitin A Kamble2011-05-138-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | python: update upstream-status for patches binutils: update upstream-status for patches gcc 4.5.1 4.6.0: update upstream-status for patches autoconf: update upstream-status for patches automake: update upstream-status for patches bison: update upstream-status for patches distcc: update upstream-status of patches fstests: update upstream-status for patches gdb: update upstream-status of patches intltool: update upstream-status of patches libtool: update upstream status of patches linux-libc-headers: update upstream-status for patches make: update upstream-status for patches perl: update upstream-status for patches python-pycurl: update upstream-status for patches python-pygobject: update upstream status for patches python-pyrex: update upstream-status for patches quilt: update upstream-status of patches tcl: update upstream-status for patches gnu-config: update upstream-status for patches gmp: update upstream-status for patches (From OE-Core rev: a62fa9b213b09bf48c48499d2e3c66a9ee306deb) Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: avoid absolute pathnames of general utilsNitin A Kamble2011-02-211-0/+37
| | | | | | | | | | addded a new patch: libtool/avoid_absolute_paths_for_general_utils.patch This fixes [BUGID #154] This fixes [BUGID #734] Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
* libtool: fix library RPATHsScott Garman2011-01-211-0/+36
| | | | | | | | | | Enabling sysroot support exposed a bug where the final library had an RPATH encoded into it which still pointed to the sysroot. This works around the issue until it gets sorted out upstream. Fix suggested by Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Scott Garman <scott.a.garman@intel.com>
* libtool: Changes to enable sysroot supportScott Garman2011-01-214-38/+884
| | | | | | | | | | | | * Added OE patches by Khem Raj which enable sysroot support and rename the command line option --with-sysroot to --with-libtool-sysroot to avoid conflicts with binutils and gcc * Removed obsolete cross_compile.patch * Changed SRC_URI_append to SRC_URI += * PR bump for all recipes Signed-off-by: Scott Garman <scott.a.garman@intel.com>
* libtool upgrade from 2.2.10 to 2.4Nitin A Kamble2010-11-182-42/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Taking out of this code from patch as the newer upstream code has fix, and this patch is not needed. cross-compile.patch: -Index: libtool-2.2.10/libltdl/config/ltmain.m4sh +Index: libtool-2.4/libltdl/config/ltmain.m4sh =================================================================== ---- libtool-2.2.10.orig/libltdl/config/ltmain.m4sh -+++ libtool-2.2.10/libltdl/config/ltmain.m4sh -@@ -5147,8 +5147,14 @@ func_mode_link () - absdir="$abs_ladir" - libdir="$abs_ladir" - else -- dir="$libdir" -- absdir="$libdir" -+ # Adding 'libdir' from the .la file to our library search paths -+ # breaks crosscompilation horribly. We cheat here and don't add -+ # it, instead adding the path where we found the .la. -CL -+ dir="$abs_ladir" -+ absdir="$abs_ladir" -+ libdir="$abs_ladir" -+ #dir="$libdir" -+ #absdir="$libdir" - fi - test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes - else Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
* Major layout change to the packages directoryRichard Purdie2010-08-274-0/+215
Having one monolithic packages directory makes it hard to find things and is generally overwhelming. This commit splits it into several logical sections roughly based on function, recipes.txt gives more information about the classifications used. The opportunity is also used to switch from "packages" to "recipes" as used in OpenEmbedded as the term "packages" can be confusing to people and has many different meanings. Not all recipes have been classified yet, this is just a first pass at separating things out. Some packages are moved to meta-extras as they're no longer actively used or maintained. Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-05-24 07:25:15 +0000