bsp-guide, dev-manual: Updated for 3.10 default kernel

YP 1.5 default kernel is 3.10.  This is a change from 3.8 in
the previous release.  This change affected several areas of
the documentation.

1. The BSP Guide had a crownbay BSP structure that did not
   account for the new default.

2. The yocto-bsp tool output still asked for the 3.8 kernel
   as the default.

3. The recipes-bsp section had 3.8 used and had some bad
   listings that had to be changed.

4. The recipes-graphics section had 3.8 used and also had some
   stuff supporting two versions of the graphics (emgd and
   noemgd).  I had to pull the emgd stuff.

5. There were miscellaneous spots in the dev-manual that were
   referencing 3.8 as the default kernel.  Particularly the
   list that shows what kernel repositories we have.  That needed
   updating.

(From yocto-docs rev: 9826ce760884f2ce5a4eb72c6a731a85cd6f2b2b)

Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

1 files changed, 45 insertions, 91 deletions

diff --git a/documentation/bsp-guide/bsp.xml b/documentation/bsp-guide/bsp.xml
index cfca34473b..e11eb4f663 100644
--- a/documentation/bsp-guide/bsp.xml
+++ b/documentation/bsp-guide/bsp.xml
@@ -183,17 +183,15 @@
      meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-config/
      meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-config/crownbay/
      meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-config/crownbay/xorg.conf
-     meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-config/crownbay-noemgd/
-     meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-config/crownbay-noemgd/xorg.conf
      meta-crownbay/recipes-kernel/
      meta-crownbay/recipes-kernel/linux/
-     meta-crownbay/recipes-kernel/linux/linux-yocto_3.2.bbappend
      meta-crownbay/recipes-kernel/linux/linux-yocto_3.4.bbappend
      meta-crownbay/recipes-kernel/linux/linux-yocto_3.8.bbappend
+     meta-crownbay/recipes-kernel/linux/linux-yocto_3.10.bbappend
      meta-crownbay/recipes-kernel/linux/linux-yocto-dev.bbappend
-     meta-crownbay/recipes-kernel/linux/linux-yocto-rt_3.2.bbappend
      meta-crownbay/recipes-kernel/linux/linux-yocto-rt_3.4.bbappend
      meta-crownbay/recipes-kernel/linux/linux-yocto-rt_3.8.bbappend
+     meta-crownbay/recipes-kernel/linux/linux-yocto-rt_3.10.bbappend
                 </literallayout>
             </para>
 
@@ -376,15 +374,6 @@
             <para>
                 Each BSP Layer requires at least one machine file.
                 However, you can supply more than one file.
-                For example, in the Crown Bay BSP shown earlier in this section, the
-                <filename>conf/machine</filename> directory contains two configuration files:
-                <filename>crownbay.conf</filename> and <filename>crownbay-noemgd.conf</filename>.
-                The <filename>crownbay.conf</filename> file is used for the Crown Bay BSP
-                that supports the <trademark class='registered'>Intel</trademark> Embedded
-                Media and Graphics Driver (<trademark class='registered'>Intel</trademark>
-                EMGD), while the <filename>crownbay-noemgd</filename> file is used for the
-                Crown Bay BSP that supports Video Electronics Standards Association (VESA)
-                graphics only.
             </para>
 
             <para>
@@ -428,15 +417,13 @@
                 This optional directory contains miscellaneous recipe files for the BSP.
                 Most notably would be the formfactor files.
                 For example, in the Crown Bay BSP there is the
-                <filename>formfactor_0.0.bbappend</filename> file, which is an append file used
-                to augment the recipe that starts the build.
-                Furthermore, there are machine-specific settings used during the build that are
-                defined by the <filename>machconfig</filename> files.
-                In the Crown Bay example, two <filename>machconfig</filename> files exist:
-                one that supports the
-                <trademark class='registered'>Intel</trademark> Embedded
-                Media and Graphics Driver (<trademark class='registered'>Intel</trademark>
-                EMGD) and one that does not:
+                <filename>formfactor_0.0.bbappend</filename> file, which is an
+                append file used to augment the recipe that starts the build.
+                Furthermore, there are machine-specific settings used during the
+                build that are defined by the <filename>machconfig</filename>.
+                In the Crown Bay example, two <filename>machconfig</filename> files
+                exist: one that supports the Intel® Embedded Media and Graphics
+                Driver (Intel® EMGD) and one that does not:
                 <literallayout class='monospaced'>
      meta-crownbay/recipes-bsp/formfactor/formfactor/crownbay/machconfig
      meta-crownbay/recipes-bsp/formfactor/formfactor/crownbay-noemgd/machconfig
@@ -467,15 +454,12 @@
                 This optional directory contains recipes for the BSP if it has
                 special requirements for graphics support.
                 All files that are needed for the BSP to support a display are kept here.
-                For example, the Crown Bay BSP contains two versions of the
-                <filename>xorg.conf</filename> file.
-                The version in <filename>crownbay</filename> builds a BSP that supports the
-                <trademark class='registered'>Intel</trademark> Embedded Media Graphics Driver (EMGD),
-                while the version in <filename>crownbay-noemgd</filename> builds
-                a BSP that supports Video Electronics Standards Association (VESA) graphics only:
+                For example, the Crown Bay BSP's <filename>xorg.conf</filename> file
+                detects the graphics support needed (i.e. the Intel® Embedded Media
+                Graphics Driver (EMGD) or the Video Electronics Standards Association
+                (VESA) graphics):
                 <literallayout class='monospaced'>
      meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
-     meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-config/crownbay/xorg.conf
      meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-config/crownbay-noemgd/xorg.conf
                 </literallayout>
             </para>
@@ -502,28 +486,28 @@
                 the <filename>meta-&lt;bsp_name&gt;/recipes-kernel/linux</filename> directory).
             </para>
             <para>
-                Suppose you are using the <filename>linux-yocto_3.8.bb</filename> recipe to build
+                Suppose you are using the <filename>linux-yocto_3.10.bb</filename> recipe to build
                 the kernel.
                 In other words, you have selected the kernel in your
                 <filename>&lt;bsp_name&gt;.conf</filename> file by adding these types
                 of statements:
                 <literallayout class='monospaced'>
      PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
-     PREFERRED_VERSION_linux-yocto ?= "3.8%"
+     PREFERRED_VERSION_linux-yocto ?= "3.10%"
                 </literallayout>
                 <note>
                     When the preferred provider is assumed by default, the
                     <filename>PREFERRED_PROVIDER</filename> statement does not appear in the
                     <filename>&lt;bsp_name&gt;.conf</filename> file.
                 </note>
-                You would use the <filename>linux-yocto_3.8.bbappend</filename> file to append
+                You would use the <filename>linux-yocto_3.10.bbappend</filename> file to append
                 specific BSP settings to the kernel, thus configuring the kernel for your particular BSP.
             </para>
             <para>
                 As an example, look at the existing Crown Bay BSP.
                 The append file used is:
                 <literallayout class='monospaced'>
-     meta-crownbay/recipes-kernel/linux/linux-yocto_3.8.bbappend
+     meta-crownbay/recipes-kernel/linux/linux-yocto_3.10.bbappend
                 </literallayout>
                 The following listing shows the file.
                 Be aware that the actual commit ID strings in this example listing might be different
@@ -532,46 +516,18 @@
                 <literallayout class='monospaced'>
      FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
 
-     COMPATIBLE_MACHINE_crownbay = "crownbay"
-     KMACHINE_crownbay = "crownbay"
-     KBRANCH_crownbay = "standard/crownbay"
-     KERNEL_FEATURES_crownbay_append = " features/drm-emgd/drm-emgd-1.16 cfg/vesafb"
-
      COMPATIBLE_MACHINE_crownbay-noemgd = "crownbay-noemgd"
      KMACHINE_crownbay-noemgd = "crownbay"
      KBRANCH_crownbay-noemgd = "standard/crownbay"
-     KERNEL_FEATURES_crownbay-noemgd_append = " cfg/vesafb"
-
-     LINUX_VERSION = "3.8.4"
-
-     SRCREV_meta_crownbay = "2a6d36e75ca0a121570a389d7bab76ec240cbfda"
-     SRCREV_machine_crownbay = "47aed0c17c1c55988198ad39f86ae88894c8e0a4"
-     SRCREV_emgd_crownbay = "c780732f175ff0ec866fac2130175876b519b576"
-
-     SRCREV_meta_crownbay-noemgd = "2a6d36e75ca0a121570a389d7bab76ec240cbfda"
-     SRCREV_machine_crownbay-noemgd = "47aed0c17c1c55988198ad39f86ae88894c8e0a4"
+     KERNEL_FEATURES_append_crownbay-noemgd = " cfg/vesafb"
 
-     SRC_URI_crownbay = "git://git.yoctoproject.org/linux-yocto-3.8.git;protocol=git;nocheckout=1;branch=${KBRANCH},${KMETA},emgd-1.16;name=machine,meta,emgd"
-                </literallayout>
-                This append file contains statements used to support the Crown Bay BSP for both
-                <trademark class='registered'>Intel</trademark> EMGD and the VESA graphics.
-                The build process, in this case, recognizes and uses only the statements that
-                apply to the defined machine name - <filename>crownbay</filename> in this case.
-                So, the applicable statements in the <filename>linux-yocto_3.8.bbappend</filename>
-                file are follows:
-                <literallayout class='monospaced'>
-     FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
-
-     COMPATIBLE_MACHINE_crownbay = "crownbay"
-     KMACHINE_crownbay = "crownbay"
-     KBRANCH_crownbay = "standard/crownbay"
-     KERNEL_FEATURES_crownbay_append = " features/drm-emgd/drm-emgd-1.16 cfg/vesafb"
+     LINUX_VERSION = "3.10.11"
 
-     SRCREV_meta_crownbay = "2a6d36e75ca0a121570a389d7bab76ec240cbfda"
-     SRCREV_machine_crownbay = "47aed0c17c1c55988198ad39f86ae88894c8e0a4"
-     SRCREV_emgd_crownbay = "c780732f175ff0ec866fac2130175876b519b576"
+     SRCREV_meta_crownbay-noemgd = "285f93bf942e8f6fa678ffc6cc53696ed5400718"
+     SRCREV_machine_crownbay-noemgd = "702040ac7c7ec66a29b4d147665ccdd0ff015577"
                 </literallayout>
-                The append file defines <filename>crownbay</filename> as the
+                This append file contains statements used to support the Crown Bay BSP.
+                The file defines <filename>crownbay</filename> as the
                 <ulink url='&YOCTO_DOCS_REF_URL;#var-COMPATIBLE_MACHINE'><filename>COMPATIBLE_MACHINE</filename></ulink>
                 and uses the
                 <ulink url='&YOCTO_DOCS_REF_URL;#var-KMACHINE'><filename>KMACHINE</filename></ulink> variable to
@@ -588,12 +544,6 @@
                 <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink> Git
                 repository and the <filename>meta</filename> Git repository branches to identify the
                 exact kernel needed to build the Crown Bay BSP.
-                <note>
-                    For <filename>crownbay</filename>, a specific commit is also needed to point
-                    to the branch that supports EMGD graphics.
-                    At a minimum, every BSP points to the
-                    <filename>machine</filename> and <filename>meta</filename> commits.
-                </note>
             </para>
 
             <para>
@@ -1281,31 +1231,35 @@
                     Following is the complete example:
                     <literallayout class='monospaced'>
      $ yocto-bsp create myarm qemu
+     Checking basic git connectivity...
+     Done.
+
      Which qemu architecture would you like to use? [default: i386]
-             1) i386    (32-bit)
+             1) i386    (32-bit)
              2) x86_64  (64-bit)
              3) ARM     (32-bit)
              4) PowerPC (32-bit)
              5) MIPS    (32-bit)
      3
-     Would you like to use the default (3.8) kernel? (y/n) [default: y]
+     Would you like to use the default (3.10) kernel? (y/n) [default: y] y
      Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n] [default: y]
-     Getting branches from remote repo git://git.yoctoproject.org/linux-yocto-3.8.git...
+     Getting branches from remote repo git://git.yoctoproject.org/linux-yocto-3.10.git...
      Please choose a machine branch to base your new BSP branch on: [default: standard/base]
-             1) standard/arm-versatile-926ejs
-             2) standard/base
-             3) standard/beagleboard
-             4) standard/ck
-             5) standard/crownbay
-             6) standard/edf
-             7) standard/emenlow
-             8) standard/fri2
-             9) standard/fsl-mpc8315e-rdb
-             10) standard/mti-malta32
-             11) standard/mti-malta64
-             12) standard/qemuppc
-             13) standard/routerstationpro
-             14) standard/sys940x
+             1) standard/arm-versatile-926ejs
+             2) standard/base
+             3) standard/beagleboard
+             4) standard/ck
+             5) standard/crownbay
+             6) standard/edf
+             7) standard/emenlow
+             8) standard/fri2
+             9) standard/fsl-mpc8315e-rdb
+             10) standard/minnow
+             11) standard/mti-malta32
+             12) standard/mti-malta64
+             13) standard/qemuppc
+             14) standard/routerstationpro
+             15) standard/sys940x
      1
      Would you like SMP support? (y/n) [default: y]
      Does your BSP have a touchscreen? (y/n) [default: n]
@@ -1320,7 +1274,7 @@
                             In the example, we use the ARM architecture.
                             </para></listitem>
                         <listitem><para>The script then prompts you for the kernel.
-                            The default 3.8 kernel is acceptable.
+                            The default 3.10 kernel is acceptable.
                             So, the example accepts the default.
                             If you enter 'n', the script prompts you to further enter the kernel
                             you do want to use (e.g. 3.2, 3.2_preempt-rt, and so forth.).</para></listitem>