summaryrefslogtreecommitdiffstats
path: root/recipes-bsp/u-boot
diff options
context:
space:
mode:
authorDenys Dmytriyenko <denys@ti.com>2013-03-18 17:39:10 -0400
committerDenys Dmytriyenko <denys@ti.com>2013-03-18 19:27:28 -0400
commit22a2fa4b97c7ce6dfcd1420d1cadb034c309047e (patch)
treecc27459ab7b893605bd8ddc342177e522e380a5c /recipes-bsp/u-boot
parent90955082eeac7f5fceccf2402abb9a924be535ed (diff)
downloadmeta-ti-22a2fa4b97c7ce6dfcd1420d1cadb034c309047e.tar.gz
u-boot 2011.06: remove an older no longer used version
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Diffstat (limited to 'recipes-bsp/u-boot')
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0001-OMAP3-Beagle-Pin-Mux-initialization-glitch-fix.patch46
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0002-OMAP-Remove-omapfb.debug-y-from-Beagle-and-Overo-env.patch56
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0003-OMAP3-beagle-pass-expansionboard-name-in-bootargs.patch57
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0004-beagleboard-add-support-for-xM-revision-C.patch47
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0005-Add-support-for-SMSC95XX-USB-2.0-10-100MBit-Ethernet.patch989
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0006-Add-Ethernet-hardware-MAC-address-framework-to-usbne.patch245
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0007-Add-documentation-for-USB-Host-Networking.patch188
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0008-dm3730-enable-dpll5.patch31
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0009-beagleboard-enable-HUB-power-on-XM-boards.patch40
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0010-beagleboard-turn-off-clocks-in-ehci_stop.patch32
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0011-beagleboard-enable-networking.patch45
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0012-beagleboard-switch-to-ttyO2-as-console.patch26
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0013-beagleboard-load-kernel-from-MMC-ext-not-FAT.patch27
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0014-beagleboard-enable-asix-driver-and-dhcp.patch34
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0015-beagleboard-hardcode-MAC-for-onboard-SMSC-and-use-uI.patch26
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0016-beagleboard-decrease-bootdelay-to-2-seconds.patch26
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0017-USB-Remove-__attribute__-packed-for-struct-ehci_hccr.patch58
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0018-usb-Some-EHCI-chipsets-are-slow-to-respond.patch29
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0019-OMAP3-Add-DSS-driver-for-OMAP3.patch349
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0020-video-DSS-makefile-update.patch30
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0021-BeagleBoard-Configure-DVI-S-video.patch170
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0022-BeagleBoard-config-enable-DSS.patch25
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0023-BeagleBoard-Added-userbutton-command.patch107
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0024-Corrected-LED-name-match-finding-avoiding-extraneous.patch44
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0025-BeagleBoard-fix-LED-0-1-in-driver.patch31
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0026-led-added-cmd_led-to-Makefile.patch29
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0027-led-correct-off-on-locations-in-structure.patch36
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0028-BeagleBoard-config-make-mtest-run.patch36
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0029-BeagleBoard-config-increase-command-line-functionali.patch42
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0030-BeagleBoard-config-add-optargs-buddy-camera.patch51
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0031-omap4-add-support-for-gpios.patch306
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0032-omap4-add-support-for-EHCI.patch322
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0033-omap4_panda-add-support-for-EHCI.patch97
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0034-omap4_panda-adding-support-for-smsc-and-tftp-boot.patch66
-rw-r--r--recipes-bsp/u-boot/u-boot/2011.06/0035-omap4_panda-use-uImage.panda-for-tftp.patch26
-rw-r--r--recipes-bsp/u-boot/u-boot/omap3-touchbook/fw_env.config6
-rw-r--r--recipes-bsp/u-boot/u-boot/touchbook-config.patch25
-rw-r--r--recipes-bsp/u-boot/u-boot_2011.06.bb51
38 files changed, 0 insertions, 3851 deletions
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0001-OMAP3-Beagle-Pin-Mux-initialization-glitch-fix.patch b/recipes-bsp/u-boot/u-boot/2011.06/0001-OMAP3-Beagle-Pin-Mux-initialization-glitch-fix.patch
deleted file mode 100644
index 6463a80e..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0001-OMAP3-Beagle-Pin-Mux-initialization-glitch-fix.patch
+++ /dev/null
@@ -1,46 +0,0 @@
1From 8892464287ca16f90397f159370f0d42ff6dc879 Mon Sep 17 00:00:00 2001
2From: Bob Feretich <bob.feretich@rafresearch.com>
3Date: Thu, 24 Feb 2011 13:16:44 +0000
4Subject: [PATCH 01/30] OMAP3 Beagle Pin Mux initialization glitch fix
5
6The below patch reverses the order of two segments in the board file.
7Output pins need to have their values initialized, before they are
8exposed to the logic outside the chip.
9
10Signed-off-by: Bob Feretich <bob.feretich@rafresearch.com>
11Cc: Wolfgang Denk <wd@denx.de>
12---
13 board/ti/beagle/beagle.c | 12 ++++++------
14 1 files changed, 6 insertions(+), 6 deletions(-)
15
16diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
17index ab50514..15d061a 100644
18--- a/board/ti/beagle/beagle.c
19+++ b/board/ti/beagle/beagle.c
20@@ -301,17 +301,17 @@ int misc_init_r(void)
21 twl4030_power_init();
22 twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
23
24- /* Configure GPIOs to output */
25- writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe);
26- writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
27- GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);
28-
29- /* Set GPIOs */
30+ /* Set GPIO states before they are made outputs */
31 writel(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1,
32 &gpio6_base->setdataout);
33 writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
34 GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout);
35
36+ /* Configure GPIOs to output */
37+ writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe);
38+ writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
39+ GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);
40+
41 dieid_num_r();
42
43 return 0;
44--
451.6.6.1
46
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0002-OMAP-Remove-omapfb.debug-y-from-Beagle-and-Overo-env.patch b/recipes-bsp/u-boot/u-boot/2011.06/0002-OMAP-Remove-omapfb.debug-y-from-Beagle-and-Overo-env.patch
deleted file mode 100644
index b4906ef9..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0002-OMAP-Remove-omapfb.debug-y-from-Beagle-and-Overo-env.patch
+++ /dev/null
@@ -1,56 +0,0 @@
1From 88ee784eddb634074895d68572b896aebd10bb5d Mon Sep 17 00:00:00 2001
2From: Steve Sakoman <steve@sakoman.com>
3Date: Thu, 30 Dec 2010 07:19:44 +0000
4Subject: [PATCH 02/30] OMAP: Remove omapfb.debug=y from Beagle and Overo env settings
5
6The kernel DSS2 code is mature now, and keeping this setting hurts performance
7
8Signed-off-by: Steve Sakoman <steve@sakoman.com>
9---
10 include/configs/omap3_beagle.h | 2 --
11 include/configs/omap3_overo.h | 2 --
12 2 files changed, 0 insertions(+), 4 deletions(-)
13
14diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
15index 9fd80ed..42575f1 100644
16--- a/include/configs/omap3_beagle.h
17+++ b/include/configs/omap3_beagle.h
18@@ -214,7 +214,6 @@
19 "mpurate=${mpurate} " \
20 "vram=${vram} " \
21 "omapfb.mode=dvi:${dvimode} " \
22- "omapfb.debug=y " \
23 "omapdss.def_disp=${defaultdisplay} " \
24 "root=${mmcroot} " \
25 "rootfstype=${mmcrootfstype}\0" \
26@@ -222,7 +221,6 @@
27 "mpurate=${mpurate} " \
28 "vram=${vram} " \
29 "omapfb.mode=dvi:${dvimode} " \
30- "omapfb.debug=y " \
31 "omapdss.def_disp=${defaultdisplay} " \
32 "root=${nandroot} " \
33 "rootfstype=${nandrootfstype}\0" \
34diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
35index 242b317..0f64054 100644
36--- a/include/configs/omap3_overo.h
37+++ b/include/configs/omap3_overo.h
38@@ -170,7 +170,6 @@
39 "mpurate=${mpurate} " \
40 "vram=${vram} " \
41 "omapfb.mode=dvi:${dvimode} " \
42- "omapfb.debug=y " \
43 "omapdss.def_disp=${defaultdisplay} " \
44 "root=${mmcroot} " \
45 "rootfstype=${mmcrootfstype}\0" \
46@@ -178,7 +177,6 @@
47 "mpurate=${mpurate} " \
48 "vram=${vram} " \
49 "omapfb.mode=dvi:${dvimode} " \
50- "omapfb.debug=y " \
51 "omapdss.def_disp=${defaultdisplay} " \
52 "root=${nandroot} " \
53 "rootfstype=${nandrootfstype}\0" \
54--
551.6.6.1
56
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0003-OMAP3-beagle-pass-expansionboard-name-in-bootargs.patch b/recipes-bsp/u-boot/u-boot/2011.06/0003-OMAP3-beagle-pass-expansionboard-name-in-bootargs.patch
deleted file mode 100644
index b2e3df62..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0003-OMAP3-beagle-pass-expansionboard-name-in-bootargs.patch
+++ /dev/null
@@ -1,57 +0,0 @@
1From 89231bb3ed75ea6801a10d3ea618c8dc83d7e483 Mon Sep 17 00:00:00 2001
2From: Koen Kooi <koen@dominion.thruhere.net>
3Date: Mon, 22 Nov 2010 11:51:32 +0100
4Subject: [PATCH 03/30] OMAP3: beagle: pass expansionboard name in bootargs
5
6---
7 include/configs/omap3_beagle.h | 13 +++++++++++++
8 1 files changed, 13 insertions(+), 0 deletions(-)
9
10diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
11index 42575f1..d5f98da 100644
12--- a/include/configs/omap3_beagle.h
13+++ b/include/configs/omap3_beagle.h
14@@ -202,6 +202,7 @@
15 "usbtty=cdc_acm\0" \
16 "console=ttyS2,115200n8\0" \
17 "mpurate=auto\0" \
18+ "buddy=none "\
19 "vram=12M\0" \
20 "dvimode=1024x768MR-16@60\0" \
21 "defaultdisplay=dvi\0" \
22@@ -212,6 +213,7 @@
23 "nandrootfstype=jffs2\0" \
24 "mmcargs=setenv bootargs console=${console} " \
25 "mpurate=${mpurate} " \
26+ "buddy=${buddy} "\
27 "vram=${vram} " \
28 "omapfb.mode=dvi:${dvimode} " \
29 "omapdss.def_disp=${defaultdisplay} " \
30@@ -219,6 +221,7 @@
31 "rootfstype=${mmcrootfstype}\0" \
32 "nandargs=setenv bootargs console=${console} " \
33 "mpurate=${mpurate} " \
34+ "buddy=${buddy} "\
35 "vram=${vram} " \
36 "omapfb.mode=dvi:${dvimode} " \
37 "omapdss.def_disp=${defaultdisplay} " \
38@@ -227,6 +230,16 @@
39 "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
40 "importbootenv=echo Importing environment from mmc ...; " \
41 "env import -t $loadaddr $filesize\0" \
42+ "ramargs=setenv bootargs console=${console} " \
43+ "${optargs} " \
44+ "mpurate=${mpurate} " \
45+ "buddy=${buddy} "\
46+ "vram=${vram} " \
47+ "omapfb.mode=dvi:${dvimode} " \
48+ "omapdss.def_disp=${defaultdisplay} " \
49+ "root=${ramroot} " \
50+ "rootfstype=${ramrootfstype}\0" \
51+ "loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
52 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
53 "mmcboot=echo Booting from mmc ...; " \
54 "run mmcargs; " \
55--
561.6.6.1
57
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0004-beagleboard-add-support-for-xM-revision-C.patch b/recipes-bsp/u-boot/u-boot/2011.06/0004-beagleboard-add-support-for-xM-revision-C.patch
deleted file mode 100644
index dec2839b..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0004-beagleboard-add-support-for-xM-revision-C.patch
+++ /dev/null
@@ -1,47 +0,0 @@
1From 9890bd3e5a28645214aff9d8d311d6a5bdec6cf9 Mon Sep 17 00:00:00 2001
2From: Koen Kooi <koen@dominion.thruhere.net>
3Date: Fri, 17 Jun 2011 09:37:37 +0200
4Subject: [PATCH 04/30] beagleboard: add support for xM revision C
5
6Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
7---
8 board/ti/beagle/beagle.c | 10 ++++++++++
9 board/ti/beagle/beagle.h | 1 +
10 2 files changed, 11 insertions(+), 0 deletions(-)
11
12diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
13index 15d061a..7768901 100644
14--- a/board/ti/beagle/beagle.c
15+++ b/board/ti/beagle/beagle.c
16@@ -216,6 +216,16 @@ int misc_init_r(void)
17 TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
18 TWL4030_PM_RECEIVER_DEV_GRP_P1);
19 break;
20+ case REVISION_XM_C:
21+ printf("Beagle xM Rev C\n");
22+ setenv("beaglerev", "xMC");
23+ MUX_BEAGLE_XM();
24+ /* Set VAUX2 to 1.8V for EHCI PHY */
25+ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
26+ TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
27+ TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
28+ TWL4030_PM_RECEIVER_DEV_GRP_P1);
29+ break;
30 default:
31 printf("Beagle unknown 0x%02x\n", get_board_revision());
32 MUX_BEAGLE_XM();
33diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
34index a7401b1..04247cd 100644
35--- a/board/ti/beagle/beagle.h
36+++ b/board/ti/beagle/beagle.h
37@@ -39,6 +39,7 @@ const omap3_sysinfo sysinfo = {
38 #define REVISION_C4 0x5
39 #define REVISION_XM_A 0x0
40 #define REVISION_XM_B 0x1
41+#define REVISION_XM_C 0x2
42
43 /*
44 * IEN - Input Enable
45--
461.6.6.1
47
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0005-Add-support-for-SMSC95XX-USB-2.0-10-100MBit-Ethernet.patch b/recipes-bsp/u-boot/u-boot/2011.06/0005-Add-support-for-SMSC95XX-USB-2.0-10-100MBit-Ethernet.patch
deleted file mode 100644
index 2c400d83..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0005-Add-support-for-SMSC95XX-USB-2.0-10-100MBit-Ethernet.patch
+++ /dev/null
@@ -1,989 +0,0 @@
1From 00b6a679e3c739567f1383030cd61483a15555f8 Mon Sep 17 00:00:00 2001
2From: Simon Glass <sjg@chromium.org>
3Date: Mon, 13 Jun 2011 13:13:09 +0000
4Subject: [PATCH 05/30] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter
5MIME-Version: 1.0
6Content-Type: text/plain; charset=UTF-8
7Content-Transfer-Encoding: 8bit
8
9The SMSC95XX is a USB hub with a built-in Ethernet adapter. This adds support
10for this, using the USB host network framework.
11
12Changes for v2:
13- Coding style cleanup
14- Changed some comments as suggested
15
16Changes for v3:
17- Change turbo_mode to #define
18
19Changes for v4:
20- Dropped Tegra2 specific bit
21- Fixed a few broken bits in SMSC from my testing
22
23Changes for v5:
24- Code style clean-ups in SMSC
25- Cleaned up debugging of errors in SMSC driver
26
27Changes for v6:
28- Set NET_IP_ALIGN to 0 always
29
30Changes for v8:
31- Add setup of SMSC write_hwaddr function
32
33Signed-off-by: Simon Glass <sjg@chromium.org>
34Tested-by: Eric Bénard <eric@eukrea.com>
35---
36 drivers/usb/eth/Makefile | 1 +
37 drivers/usb/eth/smsc95xx.c | 879 +++++++++++++++++++++++++++++++++++++++++++
38 drivers/usb/eth/usb_ether.c | 7 +
39 include/usb_ether.h | 13 +
40 4 files changed, 900 insertions(+), 0 deletions(-)
41 create mode 100644 drivers/usb/eth/smsc95xx.c
42
43diff --git a/drivers/usb/eth/Makefile b/drivers/usb/eth/Makefile
44index 6a5f25a..e28793d 100644
45--- a/drivers/usb/eth/Makefile
46+++ b/drivers/usb/eth/Makefile
47@@ -28,6 +28,7 @@ COBJS-$(CONFIG_USB_HOST_ETHER) += usb_ether.o
48 ifdef CONFIG_USB_ETHER_ASIX
49 COBJS-y += asix.o
50 endif
51+COBJS-$(CONFIG_USB_ETHER_SMSC95XX) += smsc95xx.o
52
53 COBJS := $(COBJS-y)
54 SRCS := $(COBJS:.o=.c)
55diff --git a/drivers/usb/eth/smsc95xx.c b/drivers/usb/eth/smsc95xx.c
56new file mode 100644
57index 0000000..97f2729
58--- /dev/null
59+++ b/drivers/usb/eth/smsc95xx.c
60@@ -0,0 +1,879 @@
61+/*
62+ * Copyright (c) 2011 The Chromium OS Authors.
63+ * Copyright (C) 2009 NVIDIA, Corporation
64+ * See file CREDITS for list of people who contributed to this
65+ * project.
66+ *
67+ * This program is free software; you can redistribute it and/or
68+ * modify it under the terms of the GNU General Public License as
69+ * published by the Free Software Foundation; either version 2 of
70+ * the License, or (at your option) any later version.
71+ *
72+ * This program is distributed in the hope that it will be useful,
73+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
74+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
75+ * GNU General Public License for more details.
76+ *
77+ * You should have received a copy of the GNU General Public License
78+ * along with this program; if not, write to the Free Software
79+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
80+ * MA 02111-1307 USA
81+ */
82+
83+#include <common.h>
84+#include <usb.h>
85+#include <linux/mii.h>
86+#include "usb_ether.h"
87+
88+/* SMSC LAN95xx based USB 2.0 Ethernet Devices */
89+
90+/* Tx command words */
91+#define TX_CMD_A_FIRST_SEG_ 0x00002000
92+#define TX_CMD_A_LAST_SEG_ 0x00001000
93+
94+/* Rx status word */
95+#define RX_STS_FL_ 0x3FFF0000 /* Frame Length */
96+#define RX_STS_ES_ 0x00008000 /* Error Summary */
97+
98+/* SCSRs */
99+#define ID_REV 0x00
100+
101+#define INT_STS 0x08
102+
103+#define TX_CFG 0x10
104+#define TX_CFG_ON_ 0x00000004
105+
106+#define HW_CFG 0x14
107+#define HW_CFG_BIR_ 0x00001000
108+#define HW_CFG_RXDOFF_ 0x00000600
109+#define HW_CFG_MEF_ 0x00000020
110+#define HW_CFG_BCE_ 0x00000002
111+#define HW_CFG_LRST_ 0x00000008
112+
113+#define PM_CTRL 0x20
114+#define PM_CTL_PHY_RST_ 0x00000010
115+
116+#define AFC_CFG 0x2C
117+
118+/*
119+ * Hi watermark = 15.5Kb (~10 mtu pkts)
120+ * low watermark = 3k (~2 mtu pkts)
121+ * backpressure duration = ~ 350us
122+ * Apply FC on any frame.
123+ */
124+#define AFC_CFG_DEFAULT 0x00F830A1
125+
126+#define E2P_CMD 0x30
127+#define E2P_CMD_BUSY_ 0x80000000
128+#define E2P_CMD_READ_ 0x00000000
129+#define E2P_CMD_TIMEOUT_ 0x00000400
130+#define E2P_CMD_LOADED_ 0x00000200
131+#define E2P_CMD_ADDR_ 0x000001FF
132+
133+#define E2P_DATA 0x34
134+
135+#define BURST_CAP 0x38
136+
137+#define INT_EP_CTL 0x68
138+#define INT_EP_CTL_PHY_INT_ 0x00008000
139+
140+#define BULK_IN_DLY 0x6C
141+
142+/* MAC CSRs */
143+#define MAC_CR 0x100
144+#define MAC_CR_MCPAS_ 0x00080000
145+#define MAC_CR_PRMS_ 0x00040000
146+#define MAC_CR_HPFILT_ 0x00002000
147+#define MAC_CR_TXEN_ 0x00000008
148+#define MAC_CR_RXEN_ 0x00000004
149+
150+#define ADDRH 0x104
151+
152+#define ADDRL 0x108
153+
154+#define MII_ADDR 0x114
155+#define MII_WRITE_ 0x02
156+#define MII_BUSY_ 0x01
157+#define MII_READ_ 0x00 /* ~of MII Write bit */
158+
159+#define MII_DATA 0x118
160+
161+#define FLOW 0x11C
162+
163+#define VLAN1 0x120
164+
165+#define COE_CR 0x130
166+#define Tx_COE_EN_ 0x00010000
167+#define Rx_COE_EN_ 0x00000001
168+
169+/* Vendor-specific PHY Definitions */
170+#define PHY_INT_SRC 29
171+
172+#define PHY_INT_MASK 30
173+#define PHY_INT_MASK_ANEG_COMP_ ((u16)0x0040)
174+#define PHY_INT_MASK_LINK_DOWN_ ((u16)0x0010)
175+#define PHY_INT_MASK_DEFAULT_ (PHY_INT_MASK_ANEG_COMP_ | \
176+ PHY_INT_MASK_LINK_DOWN_)
177+
178+/* USB Vendor Requests */
179+#define USB_VENDOR_REQUEST_WRITE_REGISTER 0xA0
180+#define USB_VENDOR_REQUEST_READ_REGISTER 0xA1
181+
182+/* Some extra defines */
183+#define HS_USB_PKT_SIZE 512
184+#define FS_USB_PKT_SIZE 64
185+#define DEFAULT_HS_BURST_CAP_SIZE (16 * 1024 + 5 * HS_USB_PKT_SIZE)
186+#define DEFAULT_FS_BURST_CAP_SIZE (6 * 1024 + 33 * FS_USB_PKT_SIZE)
187+#define DEFAULT_BULK_IN_DELAY 0x00002000
188+#define MAX_SINGLE_PACKET_SIZE 2048
189+#define EEPROM_MAC_OFFSET 0x01
190+#define SMSC95XX_INTERNAL_PHY_ID 1
191+#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */
192+
193+/* local defines */
194+#define SMSC95XX_BASE_NAME "sms"
195+#define USB_CTRL_SET_TIMEOUT 5000
196+#define USB_CTRL_GET_TIMEOUT 5000
197+#define USB_BULK_SEND_TIMEOUT 5000
198+#define USB_BULK_RECV_TIMEOUT 5000
199+
200+#define AX_RX_URB_SIZE 2048
201+#define PHY_CONNECT_TIMEOUT 5000
202+
203+#define TURBO_MODE
204+
205+/* local vars */
206+static int curr_eth_dev; /* index for name of next device detected */
207+
208+
209+/*
210+ * Smsc95xx infrastructure commands
211+ */
212+static int smsc95xx_write_reg(struct ueth_data *dev, u32 index, u32 data)
213+{
214+ int len;
215+
216+ cpu_to_le32s(&data);
217+
218+ len = usb_control_msg(dev->pusb_dev, usb_sndctrlpipe(dev->pusb_dev, 0),
219+ USB_VENDOR_REQUEST_WRITE_REGISTER,
220+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
221+ 00, index, &data, sizeof(data), USB_CTRL_SET_TIMEOUT);
222+ if (len != sizeof(data)) {
223+ debug("smsc95xx_write_reg failed: index=%d, data=%d, len=%d",
224+ index, data, len);
225+ return -1;
226+ }
227+ return 0;
228+}
229+
230+static int smsc95xx_read_reg(struct ueth_data *dev, u32 index, u32 *data)
231+{
232+ int len;
233+
234+ len = usb_control_msg(dev->pusb_dev, usb_rcvctrlpipe(dev->pusb_dev, 0),
235+ USB_VENDOR_REQUEST_READ_REGISTER,
236+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
237+ 00, index, data, sizeof(data), USB_CTRL_GET_TIMEOUT);
238+ if (len != sizeof(data)) {
239+ debug("smsc95xx_read_reg failed: index=%d, len=%d",
240+ index, len);
241+ return -1;
242+ }
243+
244+ le32_to_cpus(data);
245+ return 0;
246+}
247+
248+/* Loop until the read is completed with timeout */
249+static int smsc95xx_phy_wait_not_busy(struct ueth_data *dev)
250+{
251+ unsigned long start_time = get_timer(0);
252+ u32 val;
253+
254+ do {
255+ smsc95xx_read_reg(dev, MII_ADDR, &val);
256+ if (!(val & MII_BUSY_))
257+ return 0;
258+ } while (get_timer(start_time) < 1 * 1000 * 1000);
259+
260+ return -1;
261+}
262+
263+static int smsc95xx_mdio_read(struct ueth_data *dev, int phy_id, int idx)
264+{
265+ u32 val, addr;
266+
267+ /* confirm MII not busy */
268+ if (smsc95xx_phy_wait_not_busy(dev)) {
269+ debug("MII is busy in smsc95xx_mdio_read\n");
270+ return -1;
271+ }
272+
273+ /* set the address, index & direction (read from PHY) */
274+ addr = (phy_id << 11) | (idx << 6) | MII_READ_;
275+ smsc95xx_write_reg(dev, MII_ADDR, addr);
276+
277+ if (smsc95xx_phy_wait_not_busy(dev)) {
278+ debug("Timed out reading MII reg %02X\n", idx);
279+ return -1;
280+ }
281+
282+ smsc95xx_read_reg(dev, MII_DATA, &val);
283+
284+ return (u16)(val & 0xFFFF);
285+}
286+
287+static void smsc95xx_mdio_write(struct ueth_data *dev, int phy_id, int idx,
288+ int regval)
289+{
290+ u32 val, addr;
291+
292+ /* confirm MII not busy */
293+ if (smsc95xx_phy_wait_not_busy(dev)) {
294+ debug("MII is busy in smsc95xx_mdio_write\n");
295+ return;
296+ }
297+
298+ val = regval;
299+ smsc95xx_write_reg(dev, MII_DATA, val);
300+
301+ /* set the address, index & direction (write to PHY) */
302+ addr = (phy_id << 11) | (idx << 6) | MII_WRITE_;
303+ smsc95xx_write_reg(dev, MII_ADDR, addr);
304+
305+ if (smsc95xx_phy_wait_not_busy(dev))
306+ debug("Timed out writing MII reg %02X\n", idx);
307+}
308+
309+static int smsc95xx_eeprom_confirm_not_busy(struct ueth_data *dev)
310+{
311+ unsigned long start_time = get_timer(0);
312+ u32 val;
313+
314+ do {
315+ smsc95xx_read_reg(dev, E2P_CMD, &val);
316+ if (!(val & E2P_CMD_LOADED_)) {
317+ debug("No EEPROM present\n");
318+ return -1;
319+ }
320+ if (!(val & E2P_CMD_BUSY_))
321+ return 0;
322+ udelay(40);
323+ } while (get_timer(start_time) < 1 * 1000 * 1000);
324+
325+ debug("EEPROM is busy\n");
326+ return -1;
327+}
328+
329+static int smsc95xx_wait_eeprom(struct ueth_data *dev)
330+{
331+ unsigned long start_time = get_timer(0);
332+ u32 val;
333+
334+ do {
335+ smsc95xx_read_reg(dev, E2P_CMD, &val);
336+ if (!(val & E2P_CMD_BUSY_) || (val & E2P_CMD_TIMEOUT_))
337+ break;
338+ udelay(40);
339+ } while (get_timer(start_time) < 1 * 1000 * 1000);
340+
341+ if (val & (E2P_CMD_TIMEOUT_ | E2P_CMD_BUSY_)) {
342+ debug("EEPROM read operation timeout\n");
343+ return -1;
344+ }
345+ return 0;
346+}
347+
348+static int smsc95xx_read_eeprom(struct ueth_data *dev, u32 offset, u32 length,
349+ u8 *data)
350+{
351+ u32 val;
352+ int i, ret;
353+
354+ ret = smsc95xx_eeprom_confirm_not_busy(dev);
355+ if (ret)
356+ return ret;
357+
358+ for (i = 0; i < length; i++) {
359+ val = E2P_CMD_BUSY_ | E2P_CMD_READ_ | (offset & E2P_CMD_ADDR_);
360+ smsc95xx_write_reg(dev, E2P_CMD, val);
361+
362+ ret = smsc95xx_wait_eeprom(dev);
363+ if (ret < 0)
364+ return ret;
365+
366+ smsc95xx_read_reg(dev, E2P_DATA, &val);
367+ data[i] = val & 0xFF;
368+ offset++;
369+ }
370+ return 0;
371+}
372+
373+/*
374+ * mii_nway_restart - restart NWay (autonegotiation) for this interface
375+ *
376+ * Returns 0 on success, negative on error.
377+ */
378+static int mii_nway_restart(struct ueth_data *dev)
379+{
380+ int bmcr;
381+ int r = -1;
382+
383+ /* if autoneg is off, it's an error */
384+ bmcr = smsc95xx_mdio_read(dev, dev->phy_id, MII_BMCR);
385+
386+ if (bmcr & BMCR_ANENABLE) {
387+ bmcr |= BMCR_ANRESTART;
388+ smsc95xx_mdio_write(dev, dev->phy_id, MII_BMCR, bmcr);
389+ r = 0;
390+ }
391+ return r;
392+}
393+
394+static int smsc95xx_phy_initialize(struct ueth_data *dev)
395+{
396+ smsc95xx_mdio_write(dev, dev->phy_id, MII_BMCR, BMCR_RESET);
397+ smsc95xx_mdio_write(dev, dev->phy_id, MII_ADVERTISE,
398+ ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP |
399+ ADVERTISE_PAUSE_ASYM);
400+
401+ /* read to clear */
402+ smsc95xx_mdio_read(dev, dev->phy_id, PHY_INT_SRC);
403+
404+ smsc95xx_mdio_write(dev, dev->phy_id, PHY_INT_MASK,
405+ PHY_INT_MASK_DEFAULT_);
406+ mii_nway_restart(dev);
407+
408+ debug("phy initialised succesfully\n");
409+ return 0;
410+}
411+
412+static int smsc95xx_init_mac_address(struct eth_device *eth,
413+ struct ueth_data *dev)
414+{
415+ /* try reading mac address from EEPROM */
416+ if (smsc95xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
417+ eth->enetaddr) == 0) {
418+ if (is_valid_ether_addr(eth->enetaddr)) {
419+ /* eeprom values are valid so use them */
420+ debug("MAC address read from EEPROM\n");
421+ return 0;
422+ }
423+ }
424+
425+ /*
426+ * No eeprom, or eeprom values are invalid. Generating a random MAC
427+ * address is not safe. Just return an error.
428+ */
429+ return -1;
430+}
431+
432+static int smsc95xx_write_hwaddr(struct eth_device *eth)
433+{
434+ struct ueth_data *dev = (struct ueth_data *)eth->priv;
435+ u32 addr_lo, addr_hi;
436+ int ret;
437+
438+ /* set hardware address */
439+ debug("** %s()\n", __func__);
440+ addr_lo = cpu_to_le32(*((u32 *)eth->enetaddr));
441+ addr_hi = cpu_to_le16(*((u16 *)(eth->enetaddr + 4)));
442+ ret = smsc95xx_write_reg(dev, ADDRL, addr_lo);
443+ if (ret < 0) {
444+ debug("Failed to write ADDRL: %d\n", ret);
445+ return ret;
446+ }
447+
448+ ret = smsc95xx_write_reg(dev, ADDRH, addr_hi);
449+ if (ret < 0)
450+ return ret;
451+ debug("MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
452+ eth->enetaddr[0], eth->enetaddr[1],
453+ eth->enetaddr[2], eth->enetaddr[3],
454+ eth->enetaddr[4], eth->enetaddr[5]);
455+ dev->have_hwaddr = 1;
456+ return 0;
457+}
458+
459+/* Enable or disable Tx & Rx checksum offload engines */
460+static int smsc95xx_set_csums(struct ueth_data *dev,
461+ int use_tx_csum, int use_rx_csum)
462+{
463+ u32 read_buf;
464+ int ret = smsc95xx_read_reg(dev, COE_CR, &read_buf);
465+ if (ret < 0)
466+ return ret;
467+
468+ if (use_tx_csum)
469+ read_buf |= Tx_COE_EN_;
470+ else
471+ read_buf &= ~Tx_COE_EN_;
472+
473+ if (use_rx_csum)
474+ read_buf |= Rx_COE_EN_;
475+ else
476+ read_buf &= ~Rx_COE_EN_;
477+
478+ ret = smsc95xx_write_reg(dev, COE_CR, read_buf);
479+ if (ret < 0)
480+ return ret;
481+
482+ debug("COE_CR = 0x%08x\n", read_buf);
483+ return 0;
484+}
485+
486+static void smsc95xx_set_multicast(struct ueth_data *dev)
487+{
488+ /* No multicast in u-boot */
489+ dev->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
490+}
491+
492+/* starts the TX path */
493+static void smsc95xx_start_tx_path(struct ueth_data *dev)
494+{
495+ u32 reg_val;
496+
497+ /* Enable Tx at MAC */
498+ dev->mac_cr |= MAC_CR_TXEN_;
499+
500+ smsc95xx_write_reg(dev, MAC_CR, dev->mac_cr);
501+
502+ /* Enable Tx at SCSRs */
503+ reg_val = TX_CFG_ON_;
504+ smsc95xx_write_reg(dev, TX_CFG, reg_val);
505+}
506+
507+/* Starts the Receive path */
508+static void smsc95xx_start_rx_path(struct ueth_data *dev)
509+{
510+ dev->mac_cr |= MAC_CR_RXEN_;
511+ smsc95xx_write_reg(dev, MAC_CR, dev->mac_cr);
512+}
513+
514+/*
515+ * Smsc95xx callbacks
516+ */
517+static int smsc95xx_init(struct eth_device *eth, bd_t *bd)
518+{
519+ int ret;
520+ u32 write_buf;
521+ u32 read_buf;
522+ u32 burst_cap;
523+ int timeout;
524+ struct ueth_data *dev = (struct ueth_data *)eth->priv;
525+#define TIMEOUT_RESOLUTION 50 /* ms */
526+ int link_detected;
527+
528+ debug("** %s()\n", __func__);
529+ dev->phy_id = SMSC95XX_INTERNAL_PHY_ID; /* fixed phy id */
530+
531+ write_buf = HW_CFG_LRST_;
532+ ret = smsc95xx_write_reg(dev, HW_CFG, write_buf);
533+ if (ret < 0)
534+ return ret;
535+
536+ timeout = 0;
537+ do {
538+ ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
539+ if (ret < 0)
540+ return ret;
541+ udelay(10 * 1000);
542+ timeout++;
543+ } while ((read_buf & HW_CFG_LRST_) && (timeout < 100));
544+
545+ if (timeout >= 100) {
546+ debug("timeout waiting for completion of Lite Reset\n");
547+ return -1;
548+ }
549+
550+ write_buf = PM_CTL_PHY_RST_;
551+ ret = smsc95xx_write_reg(dev, PM_CTRL, write_buf);
552+ if (ret < 0)
553+ return ret;
554+
555+ timeout = 0;
556+ do {
557+ ret = smsc95xx_read_reg(dev, PM_CTRL, &read_buf);
558+ if (ret < 0)
559+ return ret;
560+ udelay(10 * 1000);
561+ timeout++;
562+ } while ((read_buf & PM_CTL_PHY_RST_) && (timeout < 100));
563+ if (timeout >= 100) {
564+ debug("timeout waiting for PHY Reset\n");
565+ return -1;
566+ }
567+ if (!dev->have_hwaddr && smsc95xx_init_mac_address(eth, dev) == 0)
568+ dev->have_hwaddr = 1;
569+ if (!dev->have_hwaddr) {
570+ puts("Error: SMSC95xx: No MAC address set - set usbethaddr\n");
571+ return -1;
572+ }
573+ if (smsc95xx_write_hwaddr(eth) < 0)
574+ return -1;
575+
576+ ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
577+ if (ret < 0)
578+ return ret;
579+ debug("Read Value from HW_CFG : 0x%08x\n", read_buf);
580+
581+ read_buf |= HW_CFG_BIR_;
582+ ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
583+ if (ret < 0)
584+ return ret;
585+
586+ ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
587+ if (ret < 0)
588+ return ret;
589+ debug("Read Value from HW_CFG after writing "
590+ "HW_CFG_BIR_: 0x%08x\n", read_buf);
591+
592+#ifdef TURBO_MODE
593+ if (dev->pusb_dev->speed == USB_SPEED_HIGH) {
594+ burst_cap = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
595+ dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE;
596+ } else {
597+ burst_cap = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
598+ dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
599+ }
600+#else
601+ burst_cap = 0;
602+ dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE;
603+#endif
604+ debug("rx_urb_size=%ld\n", (ulong)dev->rx_urb_size);
605+
606+ ret = smsc95xx_write_reg(dev, BURST_CAP, burst_cap);
607+ if (ret < 0)
608+ return ret;
609+
610+ ret = smsc95xx_read_reg(dev, BURST_CAP, &read_buf);
611+ if (ret < 0)
612+ return ret;
613+ debug("Read Value from BURST_CAP after writing: 0x%08x\n", read_buf);
614+
615+ read_buf = DEFAULT_BULK_IN_DELAY;
616+ ret = smsc95xx_write_reg(dev, BULK_IN_DLY, read_buf);
617+ if (ret < 0)
618+ return ret;
619+
620+ ret = smsc95xx_read_reg(dev, BULK_IN_DLY, &read_buf);
621+ if (ret < 0)
622+ return ret;
623+ debug("Read Value from BULK_IN_DLY after writing: "
624+ "0x%08x\n", read_buf);
625+
626+ ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
627+ if (ret < 0)
628+ return ret;
629+ debug("Read Value from HW_CFG: 0x%08x\n", read_buf);
630+
631+#ifdef TURBO_MODE
632+ read_buf |= (HW_CFG_MEF_ | HW_CFG_BCE_);
633+#endif
634+ read_buf &= ~HW_CFG_RXDOFF_;
635+
636+#define NET_IP_ALIGN 0
637+ read_buf |= NET_IP_ALIGN << 9;
638+
639+ ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
640+ if (ret < 0)
641+ return ret;
642+
643+ ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
644+ if (ret < 0)
645+ return ret;
646+ debug("Read Value from HW_CFG after writing: 0x%08x\n", read_buf);
647+
648+ write_buf = 0xFFFFFFFF;
649+ ret = smsc95xx_write_reg(dev, INT_STS, write_buf);
650+ if (ret < 0)
651+ return ret;
652+
653+ ret = smsc95xx_read_reg(dev, ID_REV, &read_buf);
654+ if (ret < 0)
655+ return ret;
656+ debug("ID_REV = 0x%08x\n", read_buf);
657+
658+ /* Init Tx */
659+ write_buf = 0;
660+ ret = smsc95xx_write_reg(dev, FLOW, write_buf);
661+ if (ret < 0)
662+ return ret;
663+
664+ read_buf = AFC_CFG_DEFAULT;
665+ ret = smsc95xx_write_reg(dev, AFC_CFG, read_buf);
666+ if (ret < 0)
667+ return ret;
668+
669+ ret = smsc95xx_read_reg(dev, MAC_CR, &dev->mac_cr);
670+ if (ret < 0)
671+ return ret;
672+
673+ /* Init Rx. Set Vlan */
674+ write_buf = (u32)ETH_P_8021Q;
675+ ret = smsc95xx_write_reg(dev, VLAN1, write_buf);
676+ if (ret < 0)
677+ return ret;
678+
679+ /* Disable checksum offload engines */
680+ ret = smsc95xx_set_csums(dev, 0, 0);
681+ if (ret < 0) {
682+ debug("Failed to set csum offload: %d\n", ret);
683+ return ret;
684+ }
685+ smsc95xx_set_multicast(dev);
686+
687+ if (smsc95xx_phy_initialize(dev) < 0)
688+ return -1;
689+ ret = smsc95xx_read_reg(dev, INT_EP_CTL, &read_buf);
690+ if (ret < 0)
691+ return ret;
692+
693+ /* enable PHY interrupts */
694+ read_buf |= INT_EP_CTL_PHY_INT_;
695+
696+ ret = smsc95xx_write_reg(dev, INT_EP_CTL, read_buf);
697+ if (ret < 0)
698+ return ret;
699+
700+ smsc95xx_start_tx_path(dev);
701+ smsc95xx_start_rx_path(dev);
702+
703+ timeout = 0;
704+ do {
705+ link_detected = smsc95xx_mdio_read(dev, dev->phy_id, MII_BMSR)
706+ & BMSR_LSTATUS;
707+ if (!link_detected) {
708+ if (timeout == 0)
709+ printf("Waiting for Ethernet connection... ");
710+ udelay(TIMEOUT_RESOLUTION * 1000);
711+ timeout += TIMEOUT_RESOLUTION;
712+ }
713+ } while (!link_detected && timeout < PHY_CONNECT_TIMEOUT);
714+ if (link_detected) {
715+ if (timeout != 0)
716+ printf("done.\n");
717+ } else {
718+ printf("unable to connect.\n");
719+ return -1;
720+ }
721+ return 0;
722+}
723+
724+static int smsc95xx_send(struct eth_device *eth, volatile void* packet,
725+ int length)
726+{
727+ struct ueth_data *dev = (struct ueth_data *)eth->priv;
728+ int err;
729+ int actual_len;
730+ u32 tx_cmd_a;
731+ u32 tx_cmd_b;
732+ unsigned char msg[PKTSIZE + sizeof(tx_cmd_a) + sizeof(tx_cmd_b)];
733+
734+ debug("** %s(), len %d, buf %#x\n", __func__, length, (int)msg);
735+ if (length > PKTSIZE)
736+ return -1;
737+
738+ tx_cmd_a = (u32)length | TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_;
739+ tx_cmd_b = (u32)length;
740+ cpu_to_le32s(&tx_cmd_a);
741+ cpu_to_le32s(&tx_cmd_b);
742+
743+ /* prepend cmd_a and cmd_b */
744+ memcpy(msg, &tx_cmd_a, sizeof(tx_cmd_a));
745+ memcpy(msg + sizeof(tx_cmd_a), &tx_cmd_b, sizeof(tx_cmd_b));
746+ memcpy(msg + sizeof(tx_cmd_a) + sizeof(tx_cmd_b), (void *)packet,
747+ length);
748+ err = usb_bulk_msg(dev->pusb_dev,
749+ usb_sndbulkpipe(dev->pusb_dev, dev->ep_out),
750+ (void *)msg,
751+ length + sizeof(tx_cmd_a) + sizeof(tx_cmd_b),
752+ &actual_len,
753+ USB_BULK_SEND_TIMEOUT);
754+ debug("Tx: len = %u, actual = %u, err = %d\n",
755+ length + sizeof(tx_cmd_a) + sizeof(tx_cmd_b),
756+ actual_len, err);
757+ return err;
758+}
759+
760+static int smsc95xx_recv(struct eth_device *eth)
761+{
762+ struct ueth_data *dev = (struct ueth_data *)eth->priv;
763+ static unsigned char recv_buf[AX_RX_URB_SIZE];
764+ unsigned char *buf_ptr;
765+ int err;
766+ int actual_len;
767+ u32 packet_len;
768+ int cur_buf_align;
769+
770+ debug("** %s()\n", __func__);
771+ err = usb_bulk_msg(dev->pusb_dev,
772+ usb_rcvbulkpipe(dev->pusb_dev, dev->ep_in),
773+ (void *)recv_buf,
774+ AX_RX_URB_SIZE,
775+ &actual_len,
776+ USB_BULK_RECV_TIMEOUT);
777+ debug("Rx: len = %u, actual = %u, err = %d\n", AX_RX_URB_SIZE,
778+ actual_len, err);
779+ if (err != 0) {
780+ debug("Rx: failed to receive\n");
781+ return -1;
782+ }
783+ if (actual_len > AX_RX_URB_SIZE) {
784+ debug("Rx: received too many bytes %d\n", actual_len);
785+ return -1;
786+ }
787+
788+ buf_ptr = recv_buf;
789+ while (actual_len > 0) {
790+ /*
791+ * 1st 4 bytes contain the length of the actual data plus error
792+ * info. Extract data length.
793+ */
794+ if (actual_len < sizeof(packet_len)) {
795+ debug("Rx: incomplete packet length\n");
796+ return -1;
797+ }
798+ memcpy(&packet_len, buf_ptr, sizeof(packet_len));
799+ le32_to_cpus(&packet_len);
800+ if (packet_len & RX_STS_ES_) {
801+ debug("Rx: Error header=%#x", packet_len);
802+ return -1;
803+ }
804+ packet_len = ((packet_len & RX_STS_FL_) >> 16);
805+
806+ if (packet_len > actual_len - sizeof(packet_len)) {
807+ debug("Rx: too large packet: %d\n", packet_len);
808+ return -1;
809+ }
810+
811+ /* Notify net stack */
812+ NetReceive(buf_ptr + sizeof(packet_len), packet_len - 4);
813+
814+ /* Adjust for next iteration */
815+ actual_len -= sizeof(packet_len) + packet_len;
816+ buf_ptr += sizeof(packet_len) + packet_len;
817+ cur_buf_align = (int)buf_ptr - (int)recv_buf;
818+
819+ if (cur_buf_align & 0x03) {
820+ int align = 4 - (cur_buf_align & 0x03);
821+
822+ actual_len -= align;
823+ buf_ptr += align;
824+ }
825+ }
826+ return err;
827+}
828+
829+static void smsc95xx_halt(struct eth_device *eth)
830+{
831+ debug("** %s()\n", __func__);
832+}
833+
834+/*
835+ * SMSC probing functions
836+ */
837+void smsc95xx_eth_before_probe(void)
838+{
839+ curr_eth_dev = 0;
840+}
841+
842+struct smsc95xx_dongle {
843+ unsigned short vendor;
844+ unsigned short product;
845+};
846+
847+static const struct smsc95xx_dongle smsc95xx_dongles[] = {
848+ { 0x0424, 0xec00 }, /* LAN9512/LAN9514 Ethernet */
849+ { 0x0424, 0x9500 }, /* LAN9500 Ethernet */
850+ { 0x0000, 0x0000 } /* END - Do not remove */
851+};
852+
853+/* Probe to see if a new device is actually an SMSC device */
854+int smsc95xx_eth_probe(struct usb_device *dev, unsigned int ifnum,
855+ struct ueth_data *ss)
856+{
857+ struct usb_interface *iface;
858+ struct usb_interface_descriptor *iface_desc;
859+ int i;
860+
861+ /* let's examine the device now */
862+ iface = &dev->config.if_desc[ifnum];
863+ iface_desc = &dev->config.if_desc[ifnum].desc;
864+
865+ for (i = 0; smsc95xx_dongles[i].vendor != 0; i++) {
866+ if (dev->descriptor.idVendor == smsc95xx_dongles[i].vendor &&
867+ dev->descriptor.idProduct == smsc95xx_dongles[i].product)
868+ /* Found a supported dongle */
869+ break;
870+ }
871+ if (smsc95xx_dongles[i].vendor == 0)
872+ return 0;
873+
874+ /* At this point, we know we've got a live one */
875+ debug("\n\nUSB Ethernet device detected\n");
876+ memset(ss, '\0', sizeof(struct ueth_data));
877+
878+ /* Initialize the ueth_data structure with some useful info */
879+ ss->ifnum = ifnum;
880+ ss->pusb_dev = dev;
881+ ss->subclass = iface_desc->bInterfaceSubClass;
882+ ss->protocol = iface_desc->bInterfaceProtocol;
883+
884+ /*
885+ * We are expecting a minimum of 3 endpoints - in, out (bulk), and int.
886+ * We will ignore any others.
887+ */
888+ for (i = 0; i < iface_desc->bNumEndpoints; i++) {
889+ /* is it an BULK endpoint? */
890+ if ((iface->ep_desc[i].bmAttributes &
891+ USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) {
892+ if (iface->ep_desc[i].bEndpointAddress & USB_DIR_IN)
893+ ss->ep_in =
894+ iface->ep_desc[i].bEndpointAddress &
895+ USB_ENDPOINT_NUMBER_MASK;
896+ else
897+ ss->ep_out =
898+ iface->ep_desc[i].bEndpointAddress &
899+ USB_ENDPOINT_NUMBER_MASK;
900+ }
901+
902+ /* is it an interrupt endpoint? */
903+ if ((iface->ep_desc[i].bmAttributes &
904+ USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
905+ ss->ep_int = iface->ep_desc[i].bEndpointAddress &
906+ USB_ENDPOINT_NUMBER_MASK;
907+ ss->irqinterval = iface->ep_desc[i].bInterval;
908+ }
909+ }
910+ debug("Endpoints In %d Out %d Int %d\n",
911+ ss->ep_in, ss->ep_out, ss->ep_int);
912+
913+ /* Do some basic sanity checks, and bail if we find a problem */
914+ if (usb_set_interface(dev, iface_desc->bInterfaceNumber, 0) ||
915+ !ss->ep_in || !ss->ep_out || !ss->ep_int) {
916+ debug("Problems with device\n");
917+ return 0;
918+ }
919+ dev->privptr = (void *)ss;
920+ return 1;
921+}
922+
923+int smsc95xx_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
924+ struct eth_device *eth)
925+{
926+ debug("** %s()\n", __func__);
927+ if (!eth) {
928+ debug("%s: missing parameter.\n", __func__);
929+ return 0;
930+ }
931+ sprintf(eth->name, "%s%d", SMSC95XX_BASE_NAME, curr_eth_dev++);
932+ eth->init = smsc95xx_init;
933+ eth->send = smsc95xx_send;
934+ eth->recv = smsc95xx_recv;
935+ eth->halt = smsc95xx_halt;
936+ eth->write_hwaddr = smsc95xx_write_hwaddr;
937+ eth->priv = ss;
938+ return 1;
939+}
940diff --git a/drivers/usb/eth/usb_ether.c b/drivers/usb/eth/usb_ether.c
941index 68a0883..7b55da3 100644
942--- a/drivers/usb/eth/usb_ether.c
943+++ b/drivers/usb/eth/usb_ether.c
944@@ -45,6 +45,13 @@ static const struct usb_eth_prob_dev prob_dev[] = {
945 .get_info = asix_eth_get_info,
946 },
947 #endif
948+#ifdef CONFIG_USB_ETHER_SMSC95XX
949+ {
950+ .before_probe = smsc95xx_eth_before_probe,
951+ .probe = smsc95xx_eth_probe,
952+ .get_info = smsc95xx_eth_get_info,
953+ },
954+#endif
955 { }, /* END */
956 };
957
958diff --git a/include/usb_ether.h b/include/usb_ether.h
959index 825c275..a7fb26b 100644
960--- a/include/usb_ether.h
961+++ b/include/usb_ether.h
962@@ -51,6 +51,11 @@ struct ueth_data {
963 unsigned char irqinterval; /* Intervall for IRQ Pipe */
964
965 /* private fields for each driver can go here if needed */
966+#ifdef CONFIG_USB_ETHER_SMSC95XX
967+ size_t rx_urb_size; /* maximum USB URB size */
968+ u32 mac_cr; /* MAC control register value */
969+ int have_hwaddr; /* 1 if we have a hardware MAC address */
970+#endif
971 };
972
973 /*
974@@ -65,4 +70,12 @@ int asix_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
975 struct eth_device *eth);
976 #endif
977
978+#ifdef CONFIG_USB_ETHER_SMSC95XX
979+void smsc95xx_eth_before_probe(void);
980+int smsc95xx_eth_probe(struct usb_device *dev, unsigned int ifnum,
981+ struct ueth_data *ss);
982+int smsc95xx_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
983+ struct eth_device *eth);
984+#endif
985+
986 #endif /* __USB_ETHER_H__ */
987--
9881.6.6.1
989
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0006-Add-Ethernet-hardware-MAC-address-framework-to-usbne.patch b/recipes-bsp/u-boot/u-boot/2011.06/0006-Add-Ethernet-hardware-MAC-address-framework-to-usbne.patch
deleted file mode 100644
index f38966ef..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0006-Add-Ethernet-hardware-MAC-address-framework-to-usbne.patch
+++ /dev/null
@@ -1,245 +0,0 @@
1From f8ff7b1760739c33b1b0aa5a88d903e6e8945f1c Mon Sep 17 00:00:00 2001
2From: Simon Glass <sjg@chromium.org>
3Date: Mon, 13 Jun 2011 13:13:10 +0000
4Subject: [PATCH 06/30] Add Ethernet hardware MAC address framework to usbnet
5MIME-Version: 1.0
6Content-Type: text/plain; charset=UTF-8
7Content-Transfer-Encoding: 8bit
8
9Built-in Ethernet adapters support setting the mac address by means of a
10ethaddr environment variable for each interface (ethaddr, eth1addr, eth2addr).
11
12This adds similar support to the USB network side, using the names
13usbethaddr, usbeth1addr, etc. They are kept separate since we don't want
14a USB device taking the MAC address of a built-in device or vice versa.
15
16Changes for v2:
17- eth_set_hwaddr -> eth_write_hwaddr
18- tided up other users of eth_getenv_enetaddr_by_index()
19
20Changes for v5:
21- Changed NULL to "eth" in eth_getenv_enetaddr_by_index() API
22
23Signed-off-by: Simon Glass <sjg@chromium.org>
24Tested-by: Eric Bénard <eric@eukrea.com>
25---
26 board/davinci/common/misc.c | 2 +-
27 drivers/net/designware.c | 2 +-
28 drivers/usb/eth/usb_ether.c | 9 +++++-
29 include/net.h | 25 ++++++++++++++++-
30 net/eth.c | 64 ++++++++++++++++++++++++++-----------------
31 5 files changed, 72 insertions(+), 30 deletions(-)
32
33diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c
34index 2bfdf23..53d6aa1 100644
35--- a/board/davinci/common/misc.c
36+++ b/board/davinci/common/misc.c
37@@ -101,7 +101,7 @@ void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr)
38 {
39 uint8_t env_enetaddr[6];
40
41- eth_getenv_enetaddr_by_index(0, env_enetaddr);
42+ eth_getenv_enetaddr_by_index("eth", 0, env_enetaddr);
43 if (!memcmp(env_enetaddr, "\0\0\0\0\0\0", 6)) {
44 /* There is no MAC address in the environment, so we initialize
45 * it from the value in the EEPROM. */
46diff --git a/drivers/net/designware.c b/drivers/net/designware.c
47index 3f5eeb7..02ba393 100644
48--- a/drivers/net/designware.c
49+++ b/drivers/net/designware.c
50@@ -500,7 +500,7 @@ int designware_initialize(u32 id, ulong base_addr, u32 phy_addr)
51 dev->iobase = (int)base_addr;
52 dev->priv = priv;
53
54- eth_getenv_enetaddr_by_index(id, &dev->enetaddr[0]);
55+ eth_getenv_enetaddr_by_index("eth", id, &dev->enetaddr[0]);
56
57 priv->dev = dev;
58 priv->mac_regs_p = (struct eth_mac_regs *)base_addr;
59diff --git a/drivers/usb/eth/usb_ether.c b/drivers/usb/eth/usb_ether.c
60index 7b55da3..6565ea5 100644
61--- a/drivers/usb/eth/usb_ether.c
62+++ b/drivers/usb/eth/usb_ether.c
63@@ -80,6 +80,7 @@ int is_eth_dev_on_usb_host(void)
64 */
65 static void probe_valid_drivers(struct usb_device *dev)
66 {
67+ struct eth_device *eth;
68 int j;
69
70 for (j = 0; prob_dev[j].probe && prob_dev[j].get_info; j++) {
71@@ -88,9 +89,10 @@ static void probe_valid_drivers(struct usb_device *dev)
72 /*
73 * ok, it is a supported eth device. Get info and fill it in
74 */
75+ eth = &usb_eth[usb_max_eth_dev].eth_dev;
76 if (prob_dev[j].get_info(dev,
77 &usb_eth[usb_max_eth_dev],
78- &usb_eth[usb_max_eth_dev].eth_dev)) {
79+ eth)) {
80 /* found proper driver */
81 /* register with networking stack */
82 usb_max_eth_dev++;
83@@ -100,7 +102,10 @@ static void probe_valid_drivers(struct usb_device *dev)
84 * call since eth_current_changed (internally called)
85 * relies on it
86 */
87- eth_register(&usb_eth[usb_max_eth_dev - 1].eth_dev);
88+ eth_register(eth);
89+ if (eth_write_hwaddr(eth, "usbeth",
90+ usb_max_eth_dev - 1))
91+ puts("Warning: failed to set MAC address\n");
92 break;
93 }
94 }
95diff --git a/include/net.h b/include/net.h
96index 018a744..ce54825 100644
97--- a/include/net.h
98+++ b/include/net.h
99@@ -128,7 +128,18 @@ extern int eth_get_dev_index (void); /* get the device index */
100 extern void eth_parse_enetaddr(const char *addr, uchar *enetaddr);
101 extern int eth_getenv_enetaddr(char *name, uchar *enetaddr);
102 extern int eth_setenv_enetaddr(char *name, const uchar *enetaddr);
103-extern int eth_getenv_enetaddr_by_index(int index, uchar *enetaddr);
104+
105+/*
106+ * Get the hardware address for an ethernet interface .
107+ * Args:
108+ * base_name - base name for device (normally "eth")
109+ * index - device index number (0 for first)
110+ * enetaddr - returns 6 byte hardware address
111+ * Returns:
112+ * Return true if the address is valid.
113+ */
114+extern int eth_getenv_enetaddr_by_index(const char *base_name, int index,
115+ uchar *enetaddr);
116
117 extern int usb_eth_initialize(bd_t *bi);
118 extern int eth_init(bd_t *bis); /* Initialize the device */
119@@ -141,6 +152,18 @@ extern int eth_rx(void); /* Check for received packets */
120 extern void eth_halt(void); /* stop SCC */
121 extern char *eth_get_name(void); /* get name of current device */
122
123+/*
124+ * Set the hardware address for an ethernet interface based on 'eth%daddr'
125+ * environment variable (or just 'ethaddr' if eth_number is 0).
126+ * Args:
127+ * base_name - base name for device (normally "eth")
128+ * eth_number - value of %d (0 for first device of this type)
129+ * Returns:
130+ * 0 is success, non-zero is error status from driver.
131+ */
132+int eth_write_hwaddr(struct eth_device *dev, const char *base_name,
133+ int eth_number);
134+
135 #ifdef CONFIG_MCAST_TFTP
136 int eth_mcast_join( IPaddr_t mcast_addr, u8 join);
137 u32 ether_crc (size_t len, unsigned char const *p);
138diff --git a/net/eth.c b/net/eth.c
139index 6523834..b3ea565 100644
140--- a/net/eth.c
141+++ b/net/eth.c
142@@ -54,10 +54,11 @@ int eth_setenv_enetaddr(char *name, const uchar *enetaddr)
143 return setenv(name, buf);
144 }
145
146-int eth_getenv_enetaddr_by_index(int index, uchar *enetaddr)
147+int eth_getenv_enetaddr_by_index(const char *base_name, int index,
148+ uchar *enetaddr)
149 {
150 char enetvar[32];
151- sprintf(enetvar, index ? "eth%daddr" : "ethaddr", index);
152+ sprintf(enetvar, index ? "%s%daddr" : "%saddr", base_name, index);
153 return eth_getenv_enetaddr(enetvar, enetaddr);
154 }
155
156@@ -188,6 +189,38 @@ static void eth_current_changed(void)
157 #endif
158 }
159
160+int eth_write_hwaddr(struct eth_device *dev, const char *base_name,
161+ int eth_number)
162+{
163+ unsigned char env_enetaddr[6];
164+ int ret = 0;
165+
166+ if (!eth_getenv_enetaddr_by_index(base_name, eth_number, env_enetaddr))
167+ return -1;
168+
169+ if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6)) {
170+ if (memcmp(dev->enetaddr, "\0\0\0\0\0\0", 6) &&
171+ memcmp(dev->enetaddr, env_enetaddr, 6)) {
172+ printf("\nWarning: %s MAC addresses don't match:\n",
173+ dev->name);
174+ printf("Address in SROM is %pM\n",
175+ dev->enetaddr);
176+ printf("Address in environment is %pM\n",
177+ env_enetaddr);
178+ }
179+
180+ memcpy(dev->enetaddr, env_enetaddr, 6);
181+ }
182+
183+ if (dev->write_hwaddr &&
184+ !eth_mac_skip(eth_number) &&
185+ is_valid_ether_addr(dev->enetaddr)) {
186+ ret = dev->write_hwaddr(dev);
187+ }
188+
189+ return ret;
190+}
191+
192 int eth_register(struct eth_device *dev)
193 {
194 struct eth_device *d;
195@@ -208,7 +241,6 @@ int eth_register(struct eth_device *dev)
196
197 int eth_initialize(bd_t *bis)
198 {
199- unsigned char env_enetaddr[6];
200 int eth_number = 0;
201
202 eth_devices = NULL;
203@@ -264,27 +296,8 @@ int eth_initialize(bd_t *bis)
204 if (strchr(dev->name, ' '))
205 puts("\nWarning: eth device name has a space!\n");
206
207- eth_getenv_enetaddr_by_index(eth_number, env_enetaddr);
208-
209- if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6)) {
210- if (memcmp(dev->enetaddr, "\0\0\0\0\0\0", 6) &&
211- memcmp(dev->enetaddr, env_enetaddr, 6))
212- {
213- printf ("\nWarning: %s MAC addresses don't match:\n",
214- dev->name);
215- printf ("Address in SROM is %pM\n",
216- dev->enetaddr);
217- printf ("Address in environment is %pM\n",
218- env_enetaddr);
219- }
220-
221- memcpy(dev->enetaddr, env_enetaddr, 6);
222- }
223- if (dev->write_hwaddr &&
224- !eth_mac_skip(eth_number) &&
225- is_valid_ether_addr(dev->enetaddr)) {
226- dev->write_hwaddr(dev);
227- }
228+ if (eth_write_hwaddr(dev, NULL, eth_number))
229+ puts("Warning: failed to set MAC address\n");
230
231 eth_number++;
232 dev = dev->next;
233@@ -359,7 +372,8 @@ int eth_init(bd_t *bis)
234 do {
235 uchar env_enetaddr[6];
236
237- if (eth_getenv_enetaddr_by_index(eth_number, env_enetaddr))
238+ if (eth_getenv_enetaddr_by_index("eth", eth_number,
239+ env_enetaddr))
240 memcpy(dev->enetaddr, env_enetaddr, 6);
241
242 ++eth_number;
243--
2441.6.6.1
245
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0007-Add-documentation-for-USB-Host-Networking.patch b/recipes-bsp/u-boot/u-boot/2011.06/0007-Add-documentation-for-USB-Host-Networking.patch
deleted file mode 100644
index f2f1cecb..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0007-Add-documentation-for-USB-Host-Networking.patch
+++ /dev/null
@@ -1,188 +0,0 @@
1From 48938b9136e85d7399b8cc831731acd26dfb2e08 Mon Sep 17 00:00:00 2001
2From: Simon Glass <sjg@chromium.org>
3Date: Mon, 13 Jun 2011 13:13:11 +0000
4Subject: [PATCH 07/30] Add documentation for USB Host Networking
5MIME-Version: 1.0
6Content-Type: text/plain; charset=UTF-8
7Content-Transfer-Encoding: 8bit
8
9This describes what it is for, devices supported, how to enable for your
10board in U-Boot, setting up the server, and notes about MAC addresses.
11
12Changes for v6:
13- Adjust documentation file according to Wolfgang's comments
14
15Signed-off-by: Simon Glass <sjg@chromium.org>
16Tested-by: Eric Bénard <eric@eukrea.com>
17---
18 doc/README.usb | 157 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-
19 1 files changed, 156 insertions(+), 1 deletions(-)
20
21diff --git a/doc/README.usb b/doc/README.usb
22index 9aa4f62..a8a4058 100644
23--- a/doc/README.usb
24+++ b/doc/README.usb
25@@ -79,4 +79,159 @@ CONFIG_USB_UHCI defines the lowlevel part.A lowlevel part must be defined
26 if using CONFIG_CMD_USB
27 CONFIG_USB_KEYBOARD enables the USB Keyboard
28 CONFIG_USB_STORAGE enables the USB storage devices
29-CONFIG_USB_HOST_ETHER enables USB ethernet dongle support
30+CONFIG_USB_HOST_ETHER enables USB ethernet adapter support
31+
32+
33+USB Host Networking
34+===================
35+
36+If you have a supported USB Ethernet adapter you can use it in U-Boot
37+to obtain an IP address and load a kernel from a network server.
38+
39+Note: USB Host Networking is not the same as making your board act as a USB
40+client. In that case your board is pretending to be an Ethernet adapter
41+and will appear as a network interface to an attached computer. In that
42+case the connection is via a USB cable with the computer acting as the host.
43+
44+With USB Host Networking, your board is the USB host. It controls the
45+Ethernet adapter to which it is directly connected and the connection to
46+the outside world is your adapter's Ethernet cable. Your board becomes an
47+independent network device, able to connect and perform network operations
48+independently of your computer.
49+
50+
51+Device support
52+--------------
53+
54+Currently supported devices are listed in the drivers according to
55+their vendor and product IDs. You can check your device by connecting it
56+to a Linux machine and typing 'lsusb'. The drivers are in
57+drivers/usb/eth.
58+
59+For example this lsusb output line shows a device with Vendor ID 0x0x95
60+and product ID 0x7720:
61+
62+Bus 002 Device 010: ID 0b95:7720 ASIX Electronics Corp. AX88772
63+
64+If you look at drivers/usb/eth/asix.c you will see this line within the
65+supported device list, so we know this adapter is supported.
66+
67+ { 0x0b95, 0x7720 }, /* Trendnet TU2-ET100 V3.0R */
68+
69+If your adapter is not listed there is a still a chance that it will
70+work. Try looking up the manufacturer of the chip inside your adapter.
71+or take the adapter apart and look for chip markings. Then add a line
72+for your vendor/product ID into the table of the appropriate driver,
73+build U-Boot and see if it works. If not then there might be differences
74+between the chip in your adapter and the driver. You could try to get a
75+datasheet for your device and add support for it to U-Boot. This is not
76+particularly difficult - you only need to provide support for four basic
77+functions: init, halt, send and recv.
78+
79+
80+Enabling USB Host Networking
81+----------------------------
82+
83+The normal U-Boot commands are used with USB networking, but you must
84+start USB first. For example:
85+
86+usb start
87+setenv bootfile /tftpboot/uImage
88+bootp
89+
90+
91+To enable USB Host Ethernet in U-Boot, your platform must of course
92+support USB with CONFIG_CMD_USB enabled and working. You will need to
93+add some config settings to your board header file:
94+
95+#define CONFIG_USB_HOST_ETHER /* Enable USB Ethernet adapters */
96+#define CONFIG_USB_ETHER_ASIX /* Asix, or whatever driver(s) you want */
97+
98+As with built-in networking, you will also want to enable some network
99+commands, for example:
100+
101+#define CONFIG_CMD_NET
102+#define CONFIG_NET_MULTI
103+#define CONFIG_CMD_PING
104+#define CONFIG_CMD_DHCP
105+
106+and some bootp options, which tell your board to obtain its subnet,
107+gateway IP, host name and boot path from the bootp/dhcp server. These
108+settings should start you off:
109+
110+#define CONFIG_BOOTP_SUBNETMASK
111+#define CONFIG_BOOTP_GATEWAY
112+#define CONFIG_BOOTP_HOSTNAME
113+#define CONFIG_BOOTP_BOOTPATH
114+
115+You can also set the default IP address of your board and the server
116+as well as the default file to load when a 'bootp' command is issued.
117+All of these can be obtained from the bootp server if not set.
118+
119+#define CONFIG_IPADDR 10.0.0.2 (replace with your value)
120+#define CONFIG_SERVERIP 10.0.0.1 (replace with your value)
121+#define CONFIG_BOOTFILE uImage
122+
123+
124+The 'usb start' command should identify the adapter something like this:
125+
126+CrOS> usb start
127+(Re)start USB...
128+USB EHCI 1.00
129+scanning bus for devices... 3 USB Device(s) found
130+ scanning bus for storage devices... 0 Storage Device(s) found
131+ scanning bus for ethernet devices... 1 Ethernet Device(s) found
132+CrOS> print ethact
133+ethact=asx0
134+
135+You can see that it found an ethernet device and we can print out the
136+device name (asx0 in this case).
137+
138+Then 'bootp' or 'dhcp' should use it to obtain an IP address from DHCP,
139+perhaps something like this:
140+
141+CrOS> bootp
142+Waiting for Ethernet connection... done.
143+BOOTP broadcast 1
144+BOOTP broadcast 2
145+DHCP client bound to address 172.22.73.81
146+Using asx0 device
147+TFTP from server 172.22.72.144; our IP address is 172.22.73.81
148+Filename '/tftpboot/uImage-sjg-seaboard-261347'.
149+Load address: 0x40c000
150+Loading: #################################################################
151+ #################################################################
152+ #################################################################
153+ ################################################
154+done
155+Bytes transferred = 3557464 (364858 hex)
156+CrOS>
157+
158+
159+Another way of doing this is to issue a tftp command, which will cause the
160+bootp to happen automatically.
161+
162+
163+MAC Addresses
164+-------------
165+
166+Most Ethernet dongles have a built-in MAC address which is unique in the
167+world. This is important so that devices on the network can be
168+distinguised from each other. MAC address conflicts are evil and
169+generally result in strange and eratic behaviour.
170+
171+Some boards have USB Ethernet chips on-board, and these sometimes do not
172+have an assigned MAC address. In this case it is up to you to assign
173+one which is unique. You should obtain a valid MAC address from a range
174+assigned to you before you ship the product.
175+
176+Built-in Ethernet adapters support setting the MAC address by means of
177+an ethaddr environment variable for each interface (ethaddr, eth1addr,
178+eth2addr). There is similar support on the USB network side, using the
179+names usbethaddr, usbeth1addr, etc. They are kept separate since we
180+don't want a USB device taking the MAC address of a built-in device or
181+vice versa.
182+
183+So if your USB Ethernet chip doesn't have a MAC address available then
184+you must set usbethaddr to a suitable MAC address. At the time of
185+writing this functionality is only supported by the SMSC driver.
186--
1871.6.6.1
188
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0008-dm3730-enable-dpll5.patch b/recipes-bsp/u-boot/u-boot/2011.06/0008-dm3730-enable-dpll5.patch
deleted file mode 100644
index 5553c58d..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0008-dm3730-enable-dpll5.patch
+++ /dev/null
@@ -1,31 +0,0 @@
1From a13358a747c33ecda28a976ed9450b9351827c2a Mon Sep 17 00:00:00 2001
2From: Eric Benard <eric@eukrea.com>
3Date: Fri, 10 Jun 2011 12:21:52 +0000
4Subject: [PATCH 08/30] dm3730: enable dpll5
5MIME-Version: 1.0
6Content-Type: text/plain; charset=UTF-8
7Content-Transfer-Encoding: 8bit
8
9which is used to provide 120MHz to USB EHCI
10This allows EHCI to work on BeagleBoard XM
11
12Signed-off-by: Eric Bénard <eric@eukrea.com>
13---
14 arch/arm/cpu/armv7/omap3/clock.c | 1 +
15 1 files changed, 1 insertions(+), 0 deletions(-)
16
17diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c
18index 3d38d08..6a9edcf 100644
19--- a/arch/arm/cpu/armv7/omap3/clock.c
20+++ b/arch/arm/cpu/armv7/omap3/clock.c
21@@ -579,6 +579,7 @@ void prcm_init(void)
22
23 dpll3_init_36xx(0, clk_index);
24 dpll4_init_36xx(0, clk_index);
25+ dpll5_init_34xx(0, clk_index);
26 iva_init_36xx(0, clk_index);
27 mpu_init_36xx(0, clk_index);
28
29--
301.6.6.1
31
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0009-beagleboard-enable-HUB-power-on-XM-boards.patch b/recipes-bsp/u-boot/u-boot/2011.06/0009-beagleboard-enable-HUB-power-on-XM-boards.patch
deleted file mode 100644
index 9dfb34bc..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0009-beagleboard-enable-HUB-power-on-XM-boards.patch
+++ /dev/null
@@ -1,40 +0,0 @@
1From 48f6f945c028a83725ab962cbff5120ac5280cd0 Mon Sep 17 00:00:00 2001
2From: Eric Benard <eric@eukrea.com>
3Date: Fri, 17 Jun 2011 09:24:24 +0200
4Subject: [PATCH 09/30] beagleboard: enable HUB power on XM boards
5MIME-Version: 1.0
6Content-Type: text/plain; charset=UTF-8
7Content-Transfer-Encoding: 8bit
8
9LEDA needs to be at level 0 to enable HUB_3V3
10
11Signed-off-by: Eric Bénard <eric@eukrea.com>
12---
13 board/ti/beagle/beagle.c | 11 +++++++++--
14 1 files changed, 9 insertions(+), 2 deletions(-)
15
16diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
17index 7768901..a6ce5a8 100644
18--- a/board/ti/beagle/beagle.c
19+++ b/board/ti/beagle/beagle.c
20@@ -309,8 +309,15 @@ int misc_init_r(void)
21 setenv(expansion_config.env_var, expansion_config.env_setting);
22
23 twl4030_power_init();
24- twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
25-
26+ switch (get_board_revision()) {
27+ case REVISION_C4:
28+ case REVISION_XM_C:
29+ twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
30+ break;
31+ default:
32+ twl4030_led_init(TWL4030_LED_LEDEN_LEDBON);
33+ break;
34+ }
35 /* Set GPIO states before they are made outputs */
36 writel(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1,
37 &gpio6_base->setdataout);
38--
391.6.6.1
40
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0010-beagleboard-turn-off-clocks-in-ehci_stop.patch b/recipes-bsp/u-boot/u-boot/2011.06/0010-beagleboard-turn-off-clocks-in-ehci_stop.patch
deleted file mode 100644
index a6898aa3..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0010-beagleboard-turn-off-clocks-in-ehci_stop.patch
+++ /dev/null
@@ -1,32 +0,0 @@
1From 9ae080a8b4f2a580c2bf3fb790fb141e1e618ef7 Mon Sep 17 00:00:00 2001
2From: Koen Kooi <koen@dominion.thruhere.net>
3Date: Fri, 17 Jun 2011 09:26:17 +0200
4Subject: [PATCH 10/30] beagleboard: turn off clocks in ehci_stop
5
6This fixes display problems in linux
7
8Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
9---
10 board/ti/beagle/beagle.c | 6 ++++++
11 1 files changed, 6 insertions(+), 0 deletions(-)
12
13diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
14index a6ce5a8..a290f89 100644
15--- a/board/ti/beagle/beagle.c
16+++ b/board/ti/beagle/beagle.c
17@@ -363,6 +363,12 @@ int ehci_hcd_stop(void)
18 pr_debug("Resetting OMAP3 EHCI\n");
19 omap_set_gpio_dataout(GPIO_PHY_RESET, 0);
20 writel(OMAP_UHH_SYSCONFIG_SOFTRESET, OMAP3_UHH_BASE + OMAP_UHH_SYSCONFIG);
21+ /* disable USB clocks */
22+ struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
23+ sr32(&prcm_base->iclken_usbhost, 0, 1, 0);
24+ sr32(&prcm_base->fclken_usbhost, 0, 2, 0);
25+ sr32(&prcm_base->iclken3_core, 2, 1, 0);
26+ sr32(&prcm_base->fclken3_core, 2, 1, 0);
27 return 0;
28 }
29
30--
311.6.6.1
32
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0011-beagleboard-enable-networking.patch b/recipes-bsp/u-boot/u-boot/2011.06/0011-beagleboard-enable-networking.patch
deleted file mode 100644
index 1935475d..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0011-beagleboard-enable-networking.patch
+++ /dev/null
@@ -1,45 +0,0 @@
1From c3d4be5f60700c3e30f00818211775a2c8398e2f Mon Sep 17 00:00:00 2001
2From: Koen Kooi <koen@dominion.thruhere.net>
3Date: Fri, 17 Jun 2011 09:31:09 +0200
4Subject: [PATCH 11/30] beagleboard: enable networking
5
6---
7 include/configs/omap3_beagle.h | 10 ++++++++--
8 1 files changed, 8 insertions(+), 2 deletions(-)
9
10diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
11index d5f98da..2daf06d 100644
12--- a/include/configs/omap3_beagle.h
13+++ b/include/configs/omap3_beagle.h
14@@ -129,6 +129,10 @@
15 #define CONFIG_CMD_USB
16 #define CONFIG_USB_EHCI
17 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
18+#define CONFIG_USB_HOST_ETHER
19+#define CONFIG_USB_ETHER_SMSC95XX
20+
21+#define CONFIG_NET_MULTI
22
23 /* commands to include */
24 #include <config_cmd_default.h>
25@@ -149,13 +153,15 @@
26 #define CONFIG_USB_STORAGE /* USB storage support */
27 #define CONFIG_CMD_NAND /* NAND support */
28 #define CONFIG_CMD_LED /* LED support */
29+#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
30+#define CONFIG_CMD_NFS /* NFS support */
31+#define CONFIG_CMD_PING
32+
33
34 #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
35 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */
36 #undef CONFIG_CMD_IMI /* iminfo */
37 #undef CONFIG_CMD_IMLS /* List all found images */
38-#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
39-#undef CONFIG_CMD_NFS /* NFS support */
40
41 #define CONFIG_SYS_NO_FLASH
42 #define CONFIG_HARD_I2C 1
43--
441.6.6.1
45
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0012-beagleboard-switch-to-ttyO2-as-console.patch b/recipes-bsp/u-boot/u-boot/2011.06/0012-beagleboard-switch-to-ttyO2-as-console.patch
deleted file mode 100644
index c25c2ad8..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0012-beagleboard-switch-to-ttyO2-as-console.patch
+++ /dev/null
@@ -1,26 +0,0 @@
1From 04a20a72599d016785d751381fb1ea5112fb0de8 Mon Sep 17 00:00:00 2001
2From: Koen Kooi <koen@dominion.thruhere.net>
3Date: Fri, 17 Jun 2011 09:32:17 +0200
4Subject: [PATCH 12/30] beagleboard: switch to ttyO2 as console
5
6Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
7---
8 include/configs/omap3_beagle.h | 2 +-
9 1 files changed, 1 insertions(+), 1 deletions(-)
10
11diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
12index 2daf06d..9a161cf 100644
13--- a/include/configs/omap3_beagle.h
14+++ b/include/configs/omap3_beagle.h
15@@ -206,7 +206,7 @@
16 #define CONFIG_EXTRA_ENV_SETTINGS \
17 "loadaddr=0x82000000\0" \
18 "usbtty=cdc_acm\0" \
19- "console=ttyS2,115200n8\0" \
20+ "console=ttyO2,115200n8\0" \
21 "mpurate=auto\0" \
22 "buddy=none "\
23 "vram=12M\0" \
24--
251.6.6.1
26
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0013-beagleboard-load-kernel-from-MMC-ext-not-FAT.patch b/recipes-bsp/u-boot/u-boot/2011.06/0013-beagleboard-load-kernel-from-MMC-ext-not-FAT.patch
deleted file mode 100644
index 28005be2..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0013-beagleboard-load-kernel-from-MMC-ext-not-FAT.patch
+++ /dev/null
@@ -1,27 +0,0 @@
1From 91da655eb768b52d085fac42648e6bcf342a1f7f Mon Sep 17 00:00:00 2001
2From: Koen Kooi <koen@dominion.thruhere.net>
3Date: Fri, 17 Jun 2011 09:33:03 +0200
4Subject: [PATCH 13/30] beagleboard: load kernel from MMC ext, not FAT
5
6Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
7---
8 include/configs/omap3_beagle.h | 3 ++-
9 1 files changed, 2 insertions(+), 1 deletions(-)
10
11diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
12index 9a161cf..dbb77fb 100644
13--- a/include/configs/omap3_beagle.h
14+++ b/include/configs/omap3_beagle.h
15@@ -246,7 +246,8 @@
16 "root=${ramroot} " \
17 "rootfstype=${ramrootfstype}\0" \
18 "loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
19- "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
20+ "loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
21+ "loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} /boot/uImage\0" \
22 "mmcboot=echo Booting from mmc ...; " \
23 "run mmcargs; " \
24 "bootm ${loadaddr}\0" \
25--
261.6.6.1
27
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0014-beagleboard-enable-asix-driver-and-dhcp.patch b/recipes-bsp/u-boot/u-boot/2011.06/0014-beagleboard-enable-asix-driver-and-dhcp.patch
deleted file mode 100644
index b14d227c..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0014-beagleboard-enable-asix-driver-and-dhcp.patch
+++ /dev/null
@@ -1,34 +0,0 @@
1From b8f56a9f7ab18641dd0f4529333b00918d34c95d Mon Sep 17 00:00:00 2001
2From: Koen Kooi <koen@dominion.thruhere.net>
3Date: Fri, 17 Jun 2011 09:47:08 +0200
4Subject: [PATCH 14/30] beagleboard: enable asix driver and dhcp
5
6Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
7---
8 include/configs/omap3_beagle.h | 3 ++-
9 1 files changed, 2 insertions(+), 1 deletions(-)
10
11diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
12index dbb77fb..49e9dd3 100644
13--- a/include/configs/omap3_beagle.h
14+++ b/include/configs/omap3_beagle.h
15@@ -131,6 +131,7 @@
16 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
17 #define CONFIG_USB_HOST_ETHER
18 #define CONFIG_USB_ETHER_SMSC95XX
19+#define CONFIG_USB_ETHER_ASIX
20
21 #define CONFIG_NET_MULTI
22
23@@ -156,7 +157,7 @@
24 #define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
25 #define CONFIG_CMD_NFS /* NFS support */
26 #define CONFIG_CMD_PING
27-
28+#define CONFIG_CMD_DHCP
29
30 #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
31 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */
32--
331.6.6.1
34
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0015-beagleboard-hardcode-MAC-for-onboard-SMSC-and-use-uI.patch b/recipes-bsp/u-boot/u-boot/2011.06/0015-beagleboard-hardcode-MAC-for-onboard-SMSC-and-use-uI.patch
deleted file mode 100644
index 56053db6..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0015-beagleboard-hardcode-MAC-for-onboard-SMSC-and-use-uI.patch
+++ /dev/null
@@ -1,26 +0,0 @@
1From 2a713d6b62248a18ee798d08bbc7850accfc2e83 Mon Sep 17 00:00:00 2001
2From: Koen Kooi <koen@dominion.thruhere.net>
3Date: Fri, 17 Jun 2011 10:02:21 +0200
4Subject: [PATCH 15/30] beagleboard: hardcode MAC for onboard SMSC and use uImage.beagle fot tftp
5
6Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
7---
8 include/configs/omap3_beagle.h | 2 ++
9 1 files changed, 2 insertions(+), 0 deletions(-)
10
11diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
12index 49e9dd3..894a071 100644
13--- a/include/configs/omap3_beagle.h
14+++ b/include/configs/omap3_beagle.h
15@@ -207,6 +207,8 @@
16 #define CONFIG_EXTRA_ENV_SETTINGS \
17 "loadaddr=0x82000000\0" \
18 "usbtty=cdc_acm\0" \
19+ "usbethaddr=de:ad:be:ef\0" \
20+ "bootfile=uImage.beagle\0" \
21 "console=ttyO2,115200n8\0" \
22 "mpurate=auto\0" \
23 "buddy=none "\
24--
251.6.6.1
26
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0016-beagleboard-decrease-bootdelay-to-2-seconds.patch b/recipes-bsp/u-boot/u-boot/2011.06/0016-beagleboard-decrease-bootdelay-to-2-seconds.patch
deleted file mode 100644
index 0e56fc41..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0016-beagleboard-decrease-bootdelay-to-2-seconds.patch
+++ /dev/null
@@ -1,26 +0,0 @@
1From ea8ed1da87f4612bdcbc611e6d4ccb9b7ea4d2ff Mon Sep 17 00:00:00 2001
2From: Koen Kooi <koen@dominion.thruhere.net>
3Date: Fri, 17 Jun 2011 10:03:06 +0200
4Subject: [PATCH 16/30] beagleboard: decrease bootdelay to 2 seconds
5
6Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
7---
8 include/configs/omap3_beagle.h | 2 +-
9 1 files changed, 1 insertions(+), 1 deletions(-)
10
11diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
12index 894a071..5c32265 100644
13--- a/include/configs/omap3_beagle.h
14+++ b/include/configs/omap3_beagle.h
15@@ -202,7 +202,7 @@
16 /* partition */
17
18 /* Environment information */
19-#define CONFIG_BOOTDELAY 10
20+#define CONFIG_BOOTDELAY 2
21
22 #define CONFIG_EXTRA_ENV_SETTINGS \
23 "loadaddr=0x82000000\0" \
24--
251.6.6.1
26
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0017-USB-Remove-__attribute__-packed-for-struct-ehci_hccr.patch b/recipes-bsp/u-boot/u-boot/2011.06/0017-USB-Remove-__attribute__-packed-for-struct-ehci_hccr.patch
deleted file mode 100644
index 43312c96..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0017-USB-Remove-__attribute__-packed-for-struct-ehci_hccr.patch
+++ /dev/null
@@ -1,58 +0,0 @@
1From 4099bd50da694cc35c489547ad0d8a30bd99006a Mon Sep 17 00:00:00 2001
2From: Jason Kridner <jkridner@beagleboard.org>
3Date: Wed, 20 Apr 2011 08:54:16 -0500
4Subject: [PATCH 17/30] USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor
5
6Remove __attribute__ ((packed)) to prevent byte access to soc
7registers in some gcc versions.
8
9Having patches to enable ehci for the BeagleBoard lying around for
10several month, this one was the show-stopper.
11
12Credits have to go to Laine Walker-Avina <lwalkera@ieee.org> for
13finding the problem.
14
15Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
16Cc: Alexander Holler <holler@ahsoftware.de>
17Cc: Sandeep Paulraj <s-paulraj@ti.com>
18---
19Changes for v2:
20* Original and v2 were provided by Alexander Holler.
21* v1 was http://patchwork.ozlabs.org/patch/89358/
22* v2 was http://patchwork.ozlabs.org/patch/89362/
23
24Changes for v3:
25* Switched to align(4), rather than remove the attribute, per suggestion
26 from Alexander.
27
28Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
29Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
30---
31 drivers/usb/host/ehci.h | 4 ++--
32 1 files changed, 2 insertions(+), 2 deletions(-)
33
34diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
35index 945ab64..3d0ad0c 100644
36--- a/drivers/usb/host/ehci.h
37+++ b/drivers/usb/host/ehci.h
38@@ -55,7 +55,7 @@ struct ehci_hccr {
39 #define HCS_N_PORTS(p) (((p) >> 0) & 0xf)
40 uint32_t cr_hccparams;
41 uint8_t cr_hcsp_portrt[8];
42-} __attribute__ ((packed));
43+} __attribute__ ((packed, aligned(4)));
44
45 struct ehci_hcor {
46 uint32_t or_usbcmd;
47@@ -85,7 +85,7 @@ struct ehci_hcor {
48 #define FLAG_CF (1 << 0) /* true: we'll support "high speed" */
49 uint32_t or_portsc[CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS];
50 uint32_t or_systune;
51-} __attribute__ ((packed));
52+} __attribute__ ((packed, aligned(4)));
53
54 #define USBMODE 0x68 /* USB Device mode */
55 #define USBMODE_SDIS (1 << 3) /* Stream disable */
56--
571.6.6.1
58
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0018-usb-Some-EHCI-chipsets-are-slow-to-respond.patch b/recipes-bsp/u-boot/u-boot/2011.06/0018-usb-Some-EHCI-chipsets-are-slow-to-respond.patch
deleted file mode 100644
index 21a1db7a..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0018-usb-Some-EHCI-chipsets-are-slow-to-respond.patch
+++ /dev/null
@@ -1,29 +0,0 @@
1From 7378bf55a895a957a5ea31c5fac5b53a844778d2 Mon Sep 17 00:00:00 2001
2From: Jason Cooper <u-boot@lakedaemon.net>
3Date: Tue, 14 Jun 2011 05:58:12 +0000
4Subject: [PATCH 18/30] usb: Some EHCI chipsets are slow to respond.
5
6This fixes 'EHCI timed out on TD...' on the dreamplug board.
7
8Signed-off-by: Jason Cooper <u-boot@lakedaemon.net>
9Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
10---
11 include/usb.h | 2 +-
12 1 files changed, 1 insertions(+), 1 deletions(-)
13
14diff --git a/include/usb.h b/include/usb.h
15index 53603a5..168e2b2 100644
16--- a/include/usb.h
17+++ b/include/usb.h
18@@ -46,7 +46,7 @@
19 * This is the timeout to allow for submitting an urb in ms. We allow more
20 * time for a BULK device to react - some are slow.
21 */
22-#define USB_TIMEOUT_MS(pipe) (usb_pipebulk(pipe) ? 5000 : 100)
23+#define USB_TIMEOUT_MS(pipe) (usb_pipebulk(pipe) ? 5000 : 500)
24
25 /* device request (setup) */
26 struct devrequest {
27--
281.6.6.1
29
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0019-OMAP3-Add-DSS-driver-for-OMAP3.patch b/recipes-bsp/u-boot/u-boot/2011.06/0019-OMAP3-Add-DSS-driver-for-OMAP3.patch
deleted file mode 100644
index b8df7d72..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0019-OMAP3-Add-DSS-driver-for-OMAP3.patch
+++ /dev/null
@@ -1,349 +0,0 @@
1From e6e189b6062f7af6b993420b9de9656e36739e66 Mon Sep 17 00:00:00 2001
2From: Syed Mohammed Khasim <khasim@ti.com>
3Date: Tue, 12 Jan 2010 23:57:28 +0530
4Subject: [PATCH 19/30] OMAP3: Add DSS driver for OMAP3
5
6Supports dynamic panel configuration
7Supports dynamic tv standard selection
8Adds support for DSS register access through generic APIs
9
10Incorporated DSS register access using structures.
11
12Previous discussions are here
13http://www.mail-archive.com/u-boot@lists.denx.de/msg27150.html
14---
15v2 updates:
16 * Enable panel output for BeagleBoard
17 * BeagleBoard: Update DVI-D orange screen frequencies for xM
18
19v3 updates:
20 * Remove non-platform (OMAP3) updates
21
22Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
23Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
24Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
25---
26 arch/arm/include/asm/arch-omap3/dss.h | 173 +++++++++++++++++++++++++++++++++
27 drivers/video/omap3_dss.c | 130 +++++++++++++++++++++++++
28 2 files changed, 303 insertions(+), 0 deletions(-)
29 create mode 100644 arch/arm/include/asm/arch-omap3/dss.h
30 create mode 100644 drivers/video/omap3_dss.c
31
32diff --git a/arch/arm/include/asm/arch-omap3/dss.h b/arch/arm/include/asm/arch-omap3/dss.h
33new file mode 100644
34index 0000000..e5e3b0d
35--- /dev/null
36+++ b/arch/arm/include/asm/arch-omap3/dss.h
37@@ -0,0 +1,173 @@
38+/*
39+ * (C) Copyright 2010
40+ * Texas Instruments, <www.ti.com>
41+ * Syed Mohammed Khasim <khasim@ti.com>
42+ *
43+ * Referred to Linux DSS driver files for OMAP3
44+ *
45+ * See file CREDITS for list of people who contributed to this
46+ * project.
47+ *
48+ * This program is free software; you can redistribute it and/or
49+ * modify it under the terms of the GNU General Public License as
50+ * published by the Free Software Foundation's version 2 of
51+ * the License.
52+ *
53+ * This program is distributed in the hope that it will be useful,
54+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
55+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
56+ * GNU General Public License for more details.
57+ *
58+ * You should have received a copy of the GNU General Public License
59+ * along with this program; if not, write to the Free Software
60+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
61+ * MA 02111-1307 USA
62+ */
63+
64+#ifndef DSS_H
65+#define DSS_H
66+
67+/*
68+ * DSS Base Registers
69+ */
70+#define OMAP3_DSS_BASE 0x48050040
71+#define OMAP3_DISPC_BASE 0x48050440
72+#define OMAP3_VENC_BASE 0x48050C00
73+
74+/* DSS Registers */
75+struct dss_regs {
76+ u32 control; /* 0x40 */
77+ u32 sdi_control; /* 0x44 */
78+ u32 pll_control; /* 0x48 */
79+};
80+
81+/* DISPC Registers */
82+struct dispc_regs {
83+ u32 control; /* 0x40 */
84+ u32 config; /* 0x44 */
85+ u32 reserve_2; /* 0x48 */
86+ u32 default_color0; /* 0x4C */
87+ u32 default_color1; /* 0x50 */
88+ u32 trans_color0; /* 0x54 */
89+ u32 trans_color1; /* 0x58 */
90+ u32 line_status; /* 0x5C */
91+ u32 line_number; /* 0x60 */
92+ u32 timing_h; /* 0x64 */
93+ u32 timing_v; /* 0x68 */
94+ u32 pol_freq; /* 0x6C */
95+ u32 divisor; /* 0x70 */
96+ u32 global_alpha; /* 0x74 */
97+ u32 size_dig; /* 0x78 */
98+ u32 size_lcd; /* 0x7C */
99+};
100+
101+/* VENC Registers */
102+struct venc_regs {
103+ u32 rev_id; /* 0x00 */
104+ u32 status; /* 0x04 */
105+ u32 f_control; /* 0x08 */
106+ u32 reserve_1; /* 0x0C */
107+ u32 vidout_ctrl; /* 0x10 */
108+ u32 sync_ctrl; /* 0x14 */
109+ u32 reserve_2; /* 0x18 */
110+ u32 llen; /* 0x1C */
111+ u32 flens; /* 0x20 */
112+ u32 hfltr_ctrl; /* 0x24 */
113+ u32 cc_carr_wss_carr; /* 0x28 */
114+ u32 c_phase; /* 0x2C */
115+ u32 gain_u; /* 0x30 */
116+ u32 gain_v; /* 0x34 */
117+ u32 gain_y; /* 0x38 */
118+ u32 black_level; /* 0x3C */
119+ u32 blank_level; /* 0x40 */
120+ u32 x_color; /* 0x44 */
121+ u32 m_control; /* 0x48 */
122+ u32 bstamp_wss_data; /* 0x4C */
123+ u32 s_carr; /* 0x50 */
124+ u32 line21; /* 0x54 */
125+ u32 ln_sel; /* 0x58 */
126+ u32 l21__wc_ctl; /* 0x5C */
127+ u32 htrigger_vtrigger; /* 0x60 */
128+ u32 savid__eavid; /* 0x64 */
129+ u32 flen__fal; /* 0x68 */
130+ u32 lal__phase_reset; /* 0x6C */
131+ u32 hs_int_start_stop_x; /* 0x70 */
132+ u32 hs_ext_start_stop_x; /* 0x74 */
133+ u32 vs_int_start_x; /* 0x78 */
134+ u32 vs_int_stop_x__vs_int_start_y; /* 0x7C */
135+ u32 vs_int_stop_y__vs_ext_start_x; /* 0x80 */
136+ u32 vs_ext_stop_x__vs_ext_start_y; /* 0x84 */
137+ u32 vs_ext_stop_y; /* 0x88 */
138+ u32 reserve_3; /* 0x8C */
139+ u32 avid_start_stop_x; /* 0x90 */
140+ u32 avid_start_stop_y; /* 0x94 */
141+ u32 reserve_4; /* 0x98 */
142+ u32 reserve_5; /* 0x9C */
143+ u32 fid_int_start_x__fid_int_start_y; /* 0xA0 */
144+ u32 fid_int_offset_y__fid_ext_start_x; /* 0xA4 */
145+ u32 fid_ext_start_y__fid_ext_offset_y; /* 0xA8 */
146+ u32 reserve_6; /* 0xAC */
147+ u32 tvdetgp_int_start_stop_x; /* 0xB0 */
148+ u32 tvdetgp_int_start_stop_y; /* 0xB4 */
149+ u32 gen_ctrl; /* 0xB8 */
150+ u32 reserve_7; /* 0xBC */
151+ u32 reserve_8; /* 0xC0 */
152+ u32 output_control; /* 0xC4 */
153+ u32 dac_b__dac_c; /* 0xC8 */
154+ u32 height_width; /* 0xCC */
155+};
156+
157+/* Few Register Offsets */
158+#define FRAME_MODE_SHIFT 1
159+#define TFTSTN_SHIFT 3
160+#define DATALINES_SHIFT 8
161+
162+/* Enabling Display controller */
163+#define LCD_ENABLE 1
164+#define DIG_ENABLE (1 << 1)
165+#define GO_LCD (1 << 5)
166+#define GO_DIG (1 << 6)
167+#define GP_OUT0 (1 << 15)
168+#define GP_OUT1 (1 << 16)
169+
170+#define DISPC_ENABLE (LCD_ENABLE | \
171+ DIG_ENABLE | \
172+ GO_LCD | \
173+ GO_DIG | \
174+ GP_OUT0| \
175+ GP_OUT1)
176+
177+/* Configure VENC DSS Params */
178+#define VENC_CLK_ENABLE (1 << 3)
179+#define DAC_DEMEN (1 << 4)
180+#define DAC_POWERDN (1 << 5)
181+#define VENC_OUT_SEL (1 << 6)
182+#define DIG_LPP_SHIFT 16
183+#define VENC_DSS_CONFIG (VENC_CLK_ENABLE | \
184+ DAC_DEMEN | \
185+ DAC_POWERDN | \
186+ VENC_OUT_SEL)
187+/*
188+ * Panel Configuration
189+ */
190+struct panel_config {
191+ u32 timing_h;
192+ u32 timing_v;
193+ u32 pol_freq;
194+ u32 divisor;
195+ u32 lcd_size;
196+ u32 panel_type;
197+ u32 data_lines;
198+ u32 load_mode;
199+ u32 panel_color;
200+};
201+
202+/*
203+ * Generic DSS Functions
204+ */
205+void omap3_dss_venc_config(const struct venc_regs *venc_cfg,
206+ u32 height, u32 width);
207+void omap3_dss_panel_config(const struct panel_config *panel_cfg);
208+void omap3_dss_enable(void);
209+
210+#endif /* DSS_H */
211diff --git a/drivers/video/omap3_dss.c b/drivers/video/omap3_dss.c
212new file mode 100644
213index 0000000..69c705a
214--- /dev/null
215+++ b/drivers/video/omap3_dss.c
216@@ -0,0 +1,130 @@
217+/*
218+ * (C) Copyright 2010
219+ * Texas Instruments, <www.ti.com>
220+ * Syed Mohammed Khasim <khasim@ti.com>
221+ *
222+ * Referred to Linux DSS driver files for OMAP3
223+ *
224+ * See file CREDITS for list of people who contributed to this
225+ * project.
226+ *
227+ * This program is free software; you can redistribute it and/or
228+ * modify it under the terms of the GNU General Public License as
229+ * published by the Free Software Foundation's version 2 of
230+ * the License.
231+ *
232+ * This program is distributed in the hope that it will be useful,
233+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
234+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
235+ * GNU General Public License for more details.
236+ *
237+ * You should have received a copy of the GNU General Public License
238+ * along with this program; if not, write to the Free Software
239+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
240+ * MA 02111-1307 USA
241+ */
242+
243+#include <common.h>
244+#include <asm/io.h>
245+#include <asm/arch/dss.h>
246+
247+/*
248+ * Configure VENC for a given Mode (NTSC / PAL)
249+ */
250+void omap3_dss_venc_config(const struct venc_regs *venc_cfg,
251+ u32 height, u32 width)
252+{
253+ struct venc_regs *venc = (struct venc_regs *) OMAP3_VENC_BASE;
254+ struct dss_regs *dss = (struct dss_regs *) OMAP3_DSS_BASE;
255+ struct dispc_regs *dispc = (struct dispc_regs *) OMAP3_DISPC_BASE;
256+
257+ writel(venc_cfg->status, &venc->status);
258+ writel(venc_cfg->f_control, &venc->f_control);
259+ writel(venc_cfg->vidout_ctrl, &venc->vidout_ctrl);
260+ writel(venc_cfg->sync_ctrl, &venc->sync_ctrl);
261+ writel(venc_cfg->llen, &venc->llen);
262+ writel(venc_cfg->flens, &venc->flens);
263+ writel(venc_cfg->hfltr_ctrl, &venc->hfltr_ctrl);
264+ writel(venc_cfg->cc_carr_wss_carr, &venc->cc_carr_wss_carr);
265+ writel(venc_cfg->c_phase, &venc->c_phase);
266+ writel(venc_cfg->gain_u, &venc->gain_u);
267+ writel(venc_cfg->gain_v, &venc->gain_v);
268+ writel(venc_cfg->gain_y, &venc->gain_y);
269+ writel(venc_cfg->black_level, &venc->black_level);
270+ writel(venc_cfg->blank_level, &venc->blank_level);
271+ writel(venc_cfg->x_color, &venc->x_color);
272+ writel(venc_cfg->m_control, &venc->m_control);
273+ writel(venc_cfg->bstamp_wss_data, &venc->bstamp_wss_data);
274+ writel(venc_cfg->s_carr, &venc->s_carr);
275+ writel(venc_cfg->line21, &venc->line21);
276+ writel(venc_cfg->ln_sel, &venc->ln_sel);
277+ writel(venc_cfg->l21__wc_ctl, &venc->l21__wc_ctl);
278+ writel(venc_cfg->htrigger_vtrigger, &venc->htrigger_vtrigger);
279+ writel(venc_cfg->savid__eavid, &venc->savid__eavid);
280+ writel(venc_cfg->flen__fal, &venc->flen__fal);
281+ writel(venc_cfg->lal__phase_reset, &venc->lal__phase_reset);
282+ writel(venc_cfg->hs_int_start_stop_x,
283+ &venc->hs_int_start_stop_x);
284+ writel(venc_cfg->hs_ext_start_stop_x,
285+ &venc->hs_ext_start_stop_x);
286+ writel(venc_cfg->vs_int_start_x, &venc->vs_int_start_x);
287+ writel(venc_cfg->vs_int_stop_x__vs_int_start_y,
288+ &venc->vs_int_stop_x__vs_int_start_y);
289+ writel(venc_cfg->vs_int_stop_y__vs_ext_start_x,
290+ &venc->vs_int_stop_y__vs_ext_start_x);
291+ writel(venc_cfg->vs_ext_stop_x__vs_ext_start_y,
292+ &venc->vs_ext_stop_x__vs_ext_start_y);
293+ writel(venc_cfg->vs_ext_stop_y, &venc->vs_ext_stop_y);
294+ writel(venc_cfg->avid_start_stop_x, &venc->avid_start_stop_x);
295+ writel(venc_cfg->avid_start_stop_y, &venc->avid_start_stop_y);
296+ writel(venc_cfg->fid_int_start_x__fid_int_start_y,
297+ &venc->fid_int_start_x__fid_int_start_y);
298+ writel(venc_cfg->fid_int_offset_y__fid_ext_start_x,
299+ &venc->fid_int_offset_y__fid_ext_start_x);
300+ writel(venc_cfg->fid_ext_start_y__fid_ext_offset_y,
301+ &venc->fid_ext_start_y__fid_ext_offset_y);
302+ writel(venc_cfg->tvdetgp_int_start_stop_x,
303+ &venc->tvdetgp_int_start_stop_x);
304+ writel(venc_cfg->tvdetgp_int_start_stop_y,
305+ &venc->tvdetgp_int_start_stop_y);
306+ writel(venc_cfg->gen_ctrl, &venc->gen_ctrl);
307+ writel(venc_cfg->output_control, &venc->output_control);
308+ writel(venc_cfg->dac_b__dac_c, &venc->dac_b__dac_c);
309+
310+ /* Configure DSS for VENC Settings */
311+ writel(VENC_DSS_CONFIG, &dss->control);
312+
313+ /* Configure height and width for Digital out */
314+ writel(((height << DIG_LPP_SHIFT) | width), &dispc->size_dig);
315+}
316+
317+/*
318+ * Configure Panel Specific Parameters
319+ */
320+void omap3_dss_panel_config(const struct panel_config *panel_cfg)
321+{
322+ struct dispc_regs *dispc = (struct dispc_regs *) OMAP3_DISPC_BASE;
323+
324+ writel(panel_cfg->timing_h, &dispc->timing_h);
325+ writel(panel_cfg->timing_v, &dispc->timing_v);
326+ writel(panel_cfg->pol_freq, &dispc->pol_freq);
327+ writel(panel_cfg->divisor, &dispc->divisor);
328+ writel(panel_cfg->lcd_size, &dispc->size_lcd);
329+ writel((panel_cfg->load_mode << FRAME_MODE_SHIFT), &dispc->config);
330+ writel(((panel_cfg->panel_type << TFTSTN_SHIFT) |
331+ (panel_cfg->data_lines << DATALINES_SHIFT)), &dispc->control);
332+ writel(panel_cfg->panel_color, &dispc->default_color0);
333+}
334+
335+/*
336+ * Enable LCD and DIGITAL OUT in DSS
337+ */
338+void omap3_dss_enable(void)
339+{
340+ struct dispc_regs *dispc = (struct dispc_regs *) OMAP3_DISPC_BASE;
341+ u32 l = 0;
342+
343+ l = readl(&dispc->control);
344+ l |= DISPC_ENABLE;
345+ writel(l, &dispc->control);
346+}
347--
3481.6.6.1
349
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0020-video-DSS-makefile-update.patch b/recipes-bsp/u-boot/u-boot/2011.06/0020-video-DSS-makefile-update.patch
deleted file mode 100644
index 045ebf6f..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0020-video-DSS-makefile-update.patch
+++ /dev/null
@@ -1,30 +0,0 @@
1From ce6813c7f4006331dd661cd25178bb258d1e9469 Mon Sep 17 00:00:00 2001
2From: Jason Kridner <jkridner@beagleboard.org>
3Date: Tue, 19 Apr 2011 14:00:34 -0500
4Subject: [PATCH 20/30] video: DSS makefile update
5
6Adding the OMAP3 DSS video driver to the Makefile. The patch applied to
7u-boot-ti didn't include this for some reason.
8
9Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
10Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
11---
12 drivers/video/Makefile | 2 ++
13 1 files changed, 2 insertions(+), 0 deletions(-)
14
15diff --git a/drivers/video/Makefile b/drivers/video/Makefile
16index 086dc05..226684a 100644
17--- a/drivers/video/Makefile
18+++ b/drivers/video/Makefile
19@@ -41,6 +41,8 @@ COBJS-$(CONFIG_SED156X) += sed156x.o
20 COBJS-$(CONFIG_VIDEO_SM501) += sm501.o
21 COBJS-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o videomodes.o
22 COBJS-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o
23+COBJS-$(CONFIG_VIDEO_OMAP3) += omap3_dss.o
24+COBJS-y += videomodes.o
25
26 COBJS := $(COBJS-y)
27 SRCS := $(COBJS:.o=.c)
28--
291.6.6.1
30
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0021-BeagleBoard-Configure-DVI-S-video.patch b/recipes-bsp/u-boot/u-boot/2011.06/0021-BeagleBoard-Configure-DVI-S-video.patch
deleted file mode 100644
index f8ab5a18..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0021-BeagleBoard-Configure-DVI-S-video.patch
+++ /dev/null
@@ -1,170 +0,0 @@
1From ebabfd9f1e6f712aafc2bba5ddfae530be4119ee Mon Sep 17 00:00:00 2001
2From: Jason Kridner <jkridner@beagleboard.org>
3Date: Tue, 19 Apr 2011 14:01:13 -0500
4Subject: [PATCH 21/30] BeagleBoard: Configure DVI/S-video
5
6Based on patches from Syed Mohammed Khasim (khasim@ti.com).
7
8Configures the output of the BeagleBoard DVI to be orange.
9Configures the output of the BeagleBoard S-Video to be a colorbar.
10---
11Updates for this version
12* Rebased on u-boot-ti.
13
14v3
15* Rebased again.
16
17Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
18Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
19---
20 board/ti/beagle/beagle.c | 24 +++++++++++++
21 board/ti/beagle/beagle.h | 86 ++++++++++++++++++++++++++++++++++++++++++++++
22 2 files changed, 110 insertions(+), 0 deletions(-)
23
24diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
25index a290f89..39d9038 100644
26--- a/board/ti/beagle/beagle.c
27+++ b/board/ti/beagle/beagle.c
28@@ -164,6 +164,28 @@ unsigned int get_expansion_id(void)
29 }
30
31 /*
32+ * Configure DSS to display background color on DVID
33+ * Configure VENC to display color bar on S-Video
34+ */
35+void display_init(void)
36+{
37+ omap3_dss_venc_config(&venc_config_std_tv, VENC_HEIGHT, VENC_WIDTH);
38+ switch (get_board_revision()) {
39+ case REVISION_AXBX:
40+ case REVISION_CX:
41+ case REVISION_C4:
42+ omap3_dss_panel_config(&dvid_cfg);
43+ break;
44+ case REVISION_XM_A:
45+ case REVISION_XM_B:
46+ case REVISION_XM_C:
47+ default:
48+ omap3_dss_panel_config(&dvid_cfg_xm);
49+ break;
50+ }
51+}
52+
53+/*
54 * Routine: misc_init_r
55 * Description: Configure board specific parts
56 */
57@@ -330,6 +352,8 @@ int misc_init_r(void)
58 GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);
59
60 dieid_num_r();
61+ display_init();
62+ omap3_dss_enable();
63
64 return 0;
65 }
66diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
67index 04247cd..18bfaa8 100644
68--- a/board/ti/beagle/beagle.h
69+++ b/board/ti/beagle/beagle.h
70@@ -23,6 +23,8 @@
71 #ifndef _BEAGLE_H_
72 #define _BEAGLE_H_
73
74+#include <asm/arch/dss.h>
75+
76 const omap3_sysinfo sysinfo = {
77 DDR_STACKED,
78 "OMAP3 Beagle board",
79@@ -472,4 +474,88 @@ const omap3_sysinfo sysinfo = {
80 MUX_VAL(CP(MMC2_DAT6), (IDIS | PTU | EN | M4)) /*GPIO_138 BT_EN*/\
81 MUX_VAL(CP(MMC2_DAT7), (IDIS | PTU | EN | M4)) /*GPIO_139 WLAN_EN*/
82
83+/*
84+ * Display Configuration
85+ */
86+
87+#define DVI_BEAGLE_ORANGE_COL 0x00FF8000
88+#define VENC_HEIGHT 0x00ef
89+#define VENC_WIDTH 0x027f
90+
91+/*
92+ * Configure VENC in DSS for Beagle to generate Color Bar
93+ *
94+ * Kindly refer to OMAP TRM for definition of these values.
95+ */
96+static const struct venc_regs venc_config_std_tv = {
97+ .status = 0x0000001B,
98+ .f_control = 0x00000040,
99+ .vidout_ctrl = 0x00000000,
100+ .sync_ctrl = 0x00008000,
101+ .llen = 0x00008359,
102+ .flens = 0x0000020C,
103+ .hfltr_ctrl = 0x00000000,
104+ .cc_carr_wss_carr = 0x043F2631,
105+ .c_phase = 0x00000024,
106+ .gain_u = 0x00000130,
107+ .gain_v = 0x00000198,
108+ .gain_y = 0x000001C0,
109+ .black_level = 0x0000006A,
110+ .blank_level = 0x0000005C,
111+ .x_color = 0x00000000,
112+ .m_control = 0x00000001,
113+ .bstamp_wss_data = 0x0000003F,
114+ .s_carr = 0x21F07C1F,
115+ .line21 = 0x00000000,
116+ .ln_sel = 0x00000015,
117+ .l21__wc_ctl = 0x00001400,
118+ .htrigger_vtrigger = 0x00000000,
119+ .savid__eavid = 0x069300F4,
120+ .flen__fal = 0x0016020C,
121+ .lal__phase_reset = 0x00060107,
122+ .hs_int_start_stop_x = 0x008D034E,
123+ .hs_ext_start_stop_x = 0x000F0359,
124+ .vs_int_start_x = 0x01A00000,
125+ .vs_int_stop_x__vs_int_start_y = 0x020501A0,
126+ .vs_int_stop_y__vs_ext_start_x = 0x01AC0024,
127+ .vs_ext_stop_x__vs_ext_start_y = 0x020D01AC,
128+ .vs_ext_stop_y = 0x00000006,
129+ .avid_start_stop_x = 0x03480079,
130+ .avid_start_stop_y = 0x02040024,
131+ .fid_int_start_x__fid_int_start_y = 0x0001008A,
132+ .fid_int_offset_y__fid_ext_start_x = 0x01AC0106,
133+ .fid_ext_start_y__fid_ext_offset_y = 0x01060006,
134+ .tvdetgp_int_start_stop_x = 0x00140001,
135+ .tvdetgp_int_start_stop_y = 0x00010001,
136+ .gen_ctrl = 0x00FF0000,
137+ .output_control = 0x0000000D,
138+ .dac_b__dac_c = 0x00000000
139+};
140+
141+/*
142+ * Configure Timings for DVI D
143+ */
144+static const struct panel_config dvid_cfg = {
145+ .timing_h = 0x0ff03f31, /* Horizantal timing */
146+ .timing_v = 0x01400504, /* Vertical timing */
147+ .pol_freq = 0x00007028, /* Pol Freq */
148+ .divisor = 0x00010006, /* 72Mhz Pixel Clock */
149+ .lcd_size = 0x02ff03ff, /* 1024x768 */
150+ .panel_type = 0x01, /* TFT */
151+ .data_lines = 0x03, /* 24 Bit RGB */
152+ .load_mode = 0x02, /* Frame Mode */
153+ .panel_color = DVI_BEAGLE_ORANGE_COL /* ORANGE */
154+};
155+
156+static const struct panel_config dvid_cfg_xm = {
157+ .timing_h = 0x1a4024c9, /* Horizantal timing */
158+ .timing_v = 0x02c00509, /* Vertical timing */
159+ .pol_freq = 0x00007028, /* Pol Freq */
160+ .divisor = 0x00010001, /* 96MHz Pixel Clock */
161+ .lcd_size = 0x02ff03ff, /* 1024x768 */
162+ .panel_type = 0x01, /* TFT */
163+ .data_lines = 0x03, /* 24 Bit RGB */
164+ .load_mode = 0x02, /* Frame Mode */
165+ .panel_color = DVI_BEAGLE_ORANGE_COL /* ORANGE */
166+};
167 #endif
168--
1691.6.6.1
170
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0022-BeagleBoard-config-enable-DSS.patch b/recipes-bsp/u-boot/u-boot/2011.06/0022-BeagleBoard-config-enable-DSS.patch
deleted file mode 100644
index 295d401e..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0022-BeagleBoard-config-enable-DSS.patch
+++ /dev/null
@@ -1,25 +0,0 @@
1From 79b347db36d583b0fde360baa780877b3a7ae754 Mon Sep 17 00:00:00 2001
2From: Koen Kooi <koen@dominion.thruhere.net>
3Date: Tue, 21 Jun 2011 22:18:01 +0200
4Subject: [PATCH 22/30] BeagleBoard: config: enable DSS
5
6Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
7---
8 include/configs/omap3_beagle.h | 1 +
9 1 files changed, 1 insertions(+), 0 deletions(-)
10
11diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
12index 5c32265..6c842ad 100644
13--- a/include/configs/omap3_beagle.h
14+++ b/include/configs/omap3_beagle.h
15@@ -172,6 +172,7 @@
16 #define CONFIG_SYS_I2C_BUS_SELECT 1
17 #define CONFIG_I2C_MULTI_BUS 1
18 #define CONFIG_DRIVER_OMAP34XX_I2C 1
19+#define CONFIG_VIDEO_OMAP3 /* DSS Support */
20
21 /*
22 * TWL4030
23--
241.6.6.1
25
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0023-BeagleBoard-Added-userbutton-command.patch b/recipes-bsp/u-boot/u-boot/2011.06/0023-BeagleBoard-Added-userbutton-command.patch
deleted file mode 100644
index 4f91cebf..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0023-BeagleBoard-Added-userbutton-command.patch
+++ /dev/null
@@ -1,107 +0,0 @@
1From b6082310a74ef48b8c2c4c67092896563141a4ad Mon Sep 17 00:00:00 2001
2From: Jason Kridner <jkridner@beagleboard.org>
3Date: Wed, 21 Jul 2010 07:41:25 -0500
4Subject: [PATCH 23/30] BeagleBoard: Added userbutton command
5
6Based on commit f1099c7c43caf5bac3bf6a65aa266fade4747072
7 Author: Greg Turner <gregturner@ti.com>
8 Date: Tue May 25 09:19:06 2010 -0500
9
10 New u-boot command for status of USER button on BeagleBoard-xM
11
12 Modified bootcmd to check the staus at boot time and set
13 filename of the boot script.
14
15* Moved to a BeagleBoard specific file.
16* Removed changes to default boot command from adding userbutton
17 command.
18* Made to handle pre-xM boards.
19* Flipped polarity of the return value to avoid confusion. Success (0)
20 is when the button is pressed. Failure (1) is when the button is NOT
21 pressed.
22* Used latest revision getting function.
23* Used latest macros for board revision.
24--
25v2 update:
26* Added xM-C revision definition (optional, since it was default)
27
28Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
29Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
30---
31 board/ti/beagle/beagle.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++
32 1 files changed, 56 insertions(+), 0 deletions(-)
33
34diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
35index 39d9038..4798194 100644
36--- a/board/ti/beagle/beagle.c
37+++ b/board/ti/beagle/beagle.c
38@@ -50,6 +50,7 @@ extern struct ehci_hccr *hccr;
39 extern volatile struct ehci_hcor *hcor;
40 #endif
41 #include "beagle.h"
42+#include <command.h>
43
44 #define pr_debug(fmt, args...) debug(fmt, ##args)
45
46@@ -477,3 +478,58 @@ int ehci_hcd_init(void)
47 }
48
49 #endif /* CONFIG_USB_EHCI */
50+
51+/*
52+ * This command returns the status of the user button on beagle xM
53+ * Input - none
54+ * Returns - 1 if button is held down
55+ * 0 if button is not held down
56+ */
57+int do_userbutton (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
58+{
59+ int button = 0;
60+ int gpio;
61+
62+ /*
63+ * pass address parameter as argv[0] (aka command name),
64+ * and all remaining args
65+ */
66+ switch (get_board_revision()) {
67+ case REVISION_AXBX:
68+ case REVISION_CX:
69+ case REVISION_C4:
70+ gpio = 7;
71+ break;
72+ case REVISION_XM_A:
73+ case REVISION_XM_B:
74+ case REVISION_XM_C:
75+ default:
76+ gpio = 4;
77+ break;
78+ }
79+ omap_request_gpio(gpio);
80+ omap_set_gpio_direction(gpio, 1);
81+ printf("The user button is currently ");
82+ if(omap_get_gpio_datain(gpio))
83+ {
84+ button = 1;
85+ printf("PRESSED.\n");
86+ }
87+ else
88+ {
89+ button = 0;
90+ printf("NOT pressed.\n");
91+ }
92+
93+ omap_free_gpio(gpio);
94+
95+ return !button;
96+}
97+
98+/* -------------------------------------------------------------------- */
99+
100+U_BOOT_CMD(
101+ userbutton, CONFIG_SYS_MAXARGS, 1, do_userbutton,
102+ "Return the status of the BeagleBoard USER button",
103+ ""
104+);
105--
1061.6.6.1
107
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0024-Corrected-LED-name-match-finding-avoiding-extraneous.patch b/recipes-bsp/u-boot/u-boot/2011.06/0024-Corrected-LED-name-match-finding-avoiding-extraneous.patch
deleted file mode 100644
index 6bc3f6d7..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0024-Corrected-LED-name-match-finding-avoiding-extraneous.patch
+++ /dev/null
@@ -1,44 +0,0 @@
1From 657f4308df123f3d2bd82c87bf667dd529d0f7c6 Mon Sep 17 00:00:00 2001
2From: Jason Kridner <jkridner@beagleboard.org>
3Date: Tue, 8 Mar 2011 20:42:01 -0600
4Subject: [PATCH 24/30] Corrected LED name match finding avoiding extraneous Usage printouts
5
6Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
7Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
8---
9 common/cmd_led.c | 5 +++--
10 1 files changed, 3 insertions(+), 2 deletions(-)
11
12diff --git a/common/cmd_led.c b/common/cmd_led.c
13index c53195f..8b46848 100644
14--- a/common/cmd_led.c
15+++ b/common/cmd_led.c
16@@ -83,7 +83,7 @@ int str_onoff (char *var)
17
18 int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
19 {
20- int state, i;
21+ int state, i, match = 0;
22
23 /* Validate arguments */
24 if ((argc != 3)) {
25@@ -98,6 +98,7 @@ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
26 for (i = 0; led_commands[i].string; i++) {
27 if ((strcmp("all", argv[1]) == 0) ||
28 (strcmp(led_commands[i].string, argv[1]) == 0)) {
29+ match = 1;
30 if (led_commands[i].on) {
31 if (state) {
32 led_commands[i].on();
33@@ -112,7 +113,7 @@ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
34 }
35
36 /* If we ran out of matches, print Usage */
37- if (!led_commands[i].string && !(strcmp("all", argv[1]) == 0)) {
38+ if (!match) {
39 return cmd_usage(cmdtp);
40 }
41
42--
431.6.6.1
44
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0025-BeagleBoard-fix-LED-0-1-in-driver.patch b/recipes-bsp/u-boot/u-boot/2011.06/0025-BeagleBoard-fix-LED-0-1-in-driver.patch
deleted file mode 100644
index 92f9cddc..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0025-BeagleBoard-fix-LED-0-1-in-driver.patch
+++ /dev/null
@@ -1,31 +0,0 @@
1From c510bdc2684b5a755c4526071f1f3ca726ac1d1d Mon Sep 17 00:00:00 2001
2From: Jason Kridner <jkridner@beagleboard.org>
3Date: Tue, 19 Apr 2011 10:55:26 -0500
4Subject: [PATCH 25/30] BeagleBoard: fix LED 0/1 in driver
5
6Fixed USR0/USR1 to be LED 0/1 respectively
7
8Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
9Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
10---
11 board/ti/beagle/led.c | 4 ++--
12 1 files changed, 2 insertions(+), 2 deletions(-)
13
14diff --git a/board/ti/beagle/led.c b/board/ti/beagle/led.c
15index 08f95a0..d3de51f 100644
16--- a/board/ti/beagle/led.c
17+++ b/board/ti/beagle/led.c
18@@ -27,8 +27,8 @@
19 static unsigned int saved_state[2] = {STATUS_LED_OFF, STATUS_LED_OFF};
20
21 /* GPIO pins for the LEDs */
22-#define BEAGLE_LED_USR0 149
23-#define BEAGLE_LED_USR1 150
24+#define BEAGLE_LED_USR0 150
25+#define BEAGLE_LED_USR1 149
26
27 #ifdef STATUS_LED_GREEN
28 void green_LED_off (void)
29--
301.6.6.1
31
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0026-led-added-cmd_led-to-Makefile.patch b/recipes-bsp/u-boot/u-boot/2011.06/0026-led-added-cmd_led-to-Makefile.patch
deleted file mode 100644
index 365ae69c..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0026-led-added-cmd_led-to-Makefile.patch
+++ /dev/null
@@ -1,29 +0,0 @@
1From 6aac1cb7f47d7126be80df2e06042d37f1affce2 Mon Sep 17 00:00:00 2001
2From: Jason Kridner <jkridner@beagleboard.org>
3Date: Wed, 20 Apr 2011 18:11:38 -0500
4Subject: [PATCH 26/30] led: added cmd_led to Makefile
5
6Addition of cmd_led into the Makefile wasn't included in the patch
7applied to u-boot-ti.
8
9Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
10Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
11---
12 common/Makefile | 1 +
13 1 files changed, 1 insertions(+), 0 deletions(-)
14
15diff --git a/common/Makefile b/common/Makefile
16index 224b7cc..7445ccc 100644
17--- a/common/Makefile
18+++ b/common/Makefile
19@@ -107,6 +107,7 @@ COBJS-$(CONFIG_CMD_ITEST) += cmd_itest.o
20 COBJS-$(CONFIG_CMD_JFFS2) += cmd_jffs2.o
21 COBJS-$(CONFIG_CMD_CRAMFS) += cmd_cramfs.o
22 COBJS-$(CONFIG_CMD_LDRINFO) += cmd_ldrinfo.o
23+COBJS-$(CONFIG_CMD_LED) += cmd_led.o
24 COBJS-$(CONFIG_CMD_LICENSE) += cmd_license.o
25 COBJS-y += cmd_load.o
26 COBJS-$(CONFIG_LOGBUFFER) += cmd_log.o
27--
281.6.6.1
29
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0027-led-correct-off-on-locations-in-structure.patch b/recipes-bsp/u-boot/u-boot/2011.06/0027-led-correct-off-on-locations-in-structure.patch
deleted file mode 100644
index d0febf8e..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0027-led-correct-off-on-locations-in-structure.patch
+++ /dev/null
@@ -1,36 +0,0 @@
1From 48393aa0119882009df057c974f0dec6051eff79 Mon Sep 17 00:00:00 2001
2From: Jason Kridner <jkridner@beagleboard.org>
3Date: Wed, 20 Apr 2011 18:13:49 -0500
4Subject: [PATCH 27/30] led: correct off/on locations in structure
5
6Although the initialization should probably be done with names, the
7existing implementation has these structures filled in the opposite
8order.
9
10Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
11--
12v2 changes:
13* Corrected comment as well.
14Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
15---
16 common/cmd_led.c | 4 ++--
17 1 files changed, 2 insertions(+), 2 deletions(-)
18
19diff --git a/common/cmd_led.c b/common/cmd_led.c
20index 8b46848..d14dd5a 100644
21--- a/common/cmd_led.c
22+++ b/common/cmd_led.c
23@@ -34,8 +34,8 @@
24 struct led_tbl_s {
25 char *string; /* String for use in the command */
26 led_id_t mask; /* Mask used for calling __led_set() */
27- void (*on)(void); /* Optional fucntion for turning LED on */
28- void (*off)(void); /* Optional fucntion for turning LED on */
29+ void (*off)(void); /* Optional function for turning LED off */
30+ void (*on)(void); /* Optional function for turning LED on */
31 };
32
33 typedef struct led_tbl_s led_tbl_t;
34--
351.6.6.1
36
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0028-BeagleBoard-config-make-mtest-run.patch b/recipes-bsp/u-boot/u-boot/2011.06/0028-BeagleBoard-config-make-mtest-run.patch
deleted file mode 100644
index 23cdc47b..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0028-BeagleBoard-config-make-mtest-run.patch
+++ /dev/null
@@ -1,36 +0,0 @@
1From 747f8f93a4e1d461340ddc04d3843d58565bab30 Mon Sep 17 00:00:00 2001
2From: Jason Kridner <jkridner@beagleboard.org>
3Date: Tue, 19 Apr 2011 11:58:54 -0500
4Subject: [PATCH 28/30] BeagleBoard: config: make mtest run
5
6Utilize the alternate mtest and define a valid region.
7
8Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
9Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
10---
11 include/configs/omap3_beagle.h | 9 +++++----
12 1 files changed, 5 insertions(+), 4 deletions(-)
13
14diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
15index 6c842ad..3bbc235 100644
16--- a/include/configs/omap3_beagle.h
17+++ b/include/configs/omap3_beagle.h
18@@ -292,10 +292,11 @@
19 /* Boot Argument Buffer Size */
20 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
21
22-#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */
23- /* works on */
24-#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
25- 0x01F00000) /* 31MB */
26+#define CONFIG_SYS_ALT_MEMTEST 1
27+#define CONFIG_SYS_MEMTEST_START (0x82000000) /* memtest */
28+ /* defaults */
29+#define CONFIG_SYS_MEMTEST_END (0x87FFFFFF) /* 128MB */
30+#define CONFIG_SYS_MEMTEST_SCRATCH (0x81000000) /* dummy address */
31
32 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */
33 /* load address */
34--
351.6.6.1
36
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0029-BeagleBoard-config-increase-command-line-functionali.patch b/recipes-bsp/u-boot/u-boot/2011.06/0029-BeagleBoard-config-increase-command-line-functionali.patch
deleted file mode 100644
index d7e2b3ad..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0029-BeagleBoard-config-increase-command-line-functionali.patch
+++ /dev/null
@@ -1,42 +0,0 @@
1From c75471405166cba2327680cc4e4d204f05007c54 Mon Sep 17 00:00:00 2001
2From: Jason Kridner <jkridner@beagleboard.org>
3Date: Tue, 19 Apr 2011 11:50:55 -0500
4Subject: [PATCH 29/30] BeagleBoard: config: increase command-line functionality
5
6Enable the expression evaluator.
7
8Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
9Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
10---
11 include/configs/omap3_beagle.h | 5 +++--
12 1 files changed, 3 insertions(+), 2 deletions(-)
13
14diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
15index 3bbc235..55973fb 100644
16--- a/include/configs/omap3_beagle.h
17+++ b/include/configs/omap3_beagle.h
18@@ -158,6 +158,7 @@
19 #define CONFIG_CMD_NFS /* NFS support */
20 #define CONFIG_CMD_PING
21 #define CONFIG_CMD_DHCP
22+#define CONFIG_CMD_SETEXPR /* Evaluate expressions */
23
24 #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
25 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */
26@@ -284,11 +285,11 @@
27 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
28 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
29 #define CONFIG_SYS_PROMPT "OMAP3 beagleboard.org # "
30-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
31+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
32 /* Print Buffer Size */
33 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
34 sizeof(CONFIG_SYS_PROMPT) + 16)
35-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
36+#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
37 /* Boot Argument Buffer Size */
38 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
39
40--
411.6.6.1
42
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0030-BeagleBoard-config-add-optargs-buddy-camera.patch b/recipes-bsp/u-boot/u-boot/2011.06/0030-BeagleBoard-config-add-optargs-buddy-camera.patch
deleted file mode 100644
index d8def033..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0030-BeagleBoard-config-add-optargs-buddy-camera.patch
+++ /dev/null
@@ -1,51 +0,0 @@
1From 0e384ea7bc94d8626c0280f7c0151f99fbc83008 Mon Sep 17 00:00:00 2001
2From: Jason Kridner <jkridner@beagleboard.org>
3Date: Tue, 19 Apr 2011 12:09:18 -0500
4Subject: [PATCH 30/30] BeagleBoard: config: add optargs/buddy/camera
5
6buddy and camera are used to configure peripherals in the kernel at boot
7time that cannot easily be detected by the kernel.
8
9Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
10Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
11---
12 include/configs/omap3_beagle.h | 6 ++++++
13 1 files changed, 6 insertions(+), 0 deletions(-)
14
15diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
16index 55973fb..024cb9a 100644
17--- a/include/configs/omap3_beagle.h
18+++ b/include/configs/omap3_beagle.h
19@@ -214,6 +214,8 @@
20 "console=ttyO2,115200n8\0" \
21 "mpurate=auto\0" \
22 "buddy=none "\
23+ "optargs=\0" \
24+ "camera=none\0" \
25 "vram=12M\0" \
26 "dvimode=1024x768MR-16@60\0" \
27 "defaultdisplay=dvi\0" \
28@@ -223,16 +225,20 @@
29 "nandroot=/dev/mtdblock4 rw\0" \
30 "nandrootfstype=jffs2\0" \
31 "mmcargs=setenv bootargs console=${console} " \
32+ "${optargs} " \
33 "mpurate=${mpurate} " \
34 "buddy=${buddy} "\
35+ "camera=${camera} "\
36 "vram=${vram} " \
37 "omapfb.mode=dvi:${dvimode} " \
38 "omapdss.def_disp=${defaultdisplay} " \
39 "root=${mmcroot} " \
40 "rootfstype=${mmcrootfstype}\0" \
41 "nandargs=setenv bootargs console=${console} " \
42+ "${optargs} " \
43 "mpurate=${mpurate} " \
44 "buddy=${buddy} "\
45+ "camera=${camera} "\
46 "vram=${vram} " \
47 "omapfb.mode=dvi:${dvimode} " \
48 "omapdss.def_disp=${defaultdisplay} " \
49--
501.6.6.1
51
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0031-omap4-add-support-for-gpios.patch b/recipes-bsp/u-boot/u-boot/2011.06/0031-omap4-add-support-for-gpios.patch
deleted file mode 100644
index 26b40caf..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0031-omap4-add-support-for-gpios.patch
+++ /dev/null
@@ -1,306 +0,0 @@
1From b2395bf32d0475dd4a729155e94e5d1605c54362 Mon Sep 17 00:00:00 2001
2From: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
3Date: Mon, 9 May 2011 18:04:49 -0300
4Subject: [PATCH 31/35] omap4: add support for gpios
5
6Copied from omap3.
7
8Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
9Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
10---
11 arch/arm/cpu/armv7/omap4/Makefile | 1 +
12 arch/arm/cpu/armv7/omap4/gpio.c | 169 ++++++++++++++++++++++++++++++++
13 arch/arm/include/asm/arch-omap4/gpio.h | 93 +++++++++++++++++
14 3 files changed, 263 insertions(+), 0 deletions(-)
15 create mode 100644 arch/arm/cpu/armv7/omap4/gpio.c
16 create mode 100644 arch/arm/include/asm/arch-omap4/gpio.h
17
18diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile
19index 987dc9d..c39693a 100644
20--- a/arch/arm/cpu/armv7/omap4/Makefile
21+++ b/arch/arm/cpu/armv7/omap4/Makefile
22@@ -29,6 +29,7 @@ SOBJS += lowlevel_init.o
23
24 COBJS += board.o
25 COBJS += mem.o
26+COBJS += gpio.o
27 COBJS += sys_info.o
28
29 SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
30diff --git a/arch/arm/cpu/armv7/omap4/gpio.c b/arch/arm/cpu/armv7/omap4/gpio.c
31new file mode 100644
32index 0000000..40f1d5e
33--- /dev/null
34+++ b/arch/arm/cpu/armv7/omap4/gpio.c
35@@ -0,0 +1,169 @@
36+/*
37+ * Lifted from arch/arm/cpu/armv7/omap3/gpio.c
38+ *
39+ * Original Copyright (c) 2009 Wind River Systems, Inc.
40+ * Tom Rix <Tom.Rix@windriver.com>
41+ *
42+ * This program is free software; you can redistribute it and/or
43+ * modify it under the terms of the GNU General Public License as
44+ * published by the Free Software Foundation; either version 2 of
45+ * the License, or (at your option) any later version.
46+ *
47+ * This program is distributed in the hope that it will be useful,
48+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
49+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
50+ * GNU General Public License for more details.
51+ *
52+ * You should have received a copy of the GNU General Public License
53+ * along with this program; if not, write to the Free Software
54+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
55+ * MA 02111-1307 USA
56+ *
57+ * This work is derived from the linux 2.6.27 kernel source
58+ * To fetch, use the kernel repository
59+ * git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
60+ * Use the v2.6.27 tag.
61+ *
62+ * Below is the original's header including its copyright
63+ *
64+ * linux/arch/arm/plat-omap/gpio.c
65+ *
66+ * Support functions for OMAP GPIO
67+ *
68+ * Copyright (C) 2003-2005 Nokia Corporation
69+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
70+ *
71+ * This program is free software; you can redistribute it and/or modify
72+ * it under the terms of the GNU General Public License version 2 as
73+ * published by the Free Software Foundation.
74+ */
75+#include <common.h>
76+#include <asm/arch/gpio.h>
77+#include <asm/io.h>
78+#include <asm/errno.h>
79+
80+/*
81+ * OMAP44XX specific GPIO registers
82+ */
83+#define OMAP44XX_GPIO1_BASE 0x4a310000
84+#define OMAP44XX_GPIO2_BASE 0x48055000
85+#define OMAP44XX_GPIO3_BASE 0x48057000
86+#define OMAP44XX_GPIO4_BASE 0x48059000
87+#define OMAP44XX_GPIO5_BASE 0x4805B000
88+#define OMAP44XX_GPIO6_BASE 0x4805D000
89+
90+static const struct gpio_bank gpio_bank_44xx[6] = {
91+ { (void *)OMAP44XX_GPIO1_BASE },
92+ { (void *)OMAP44XX_GPIO2_BASE },
93+ { (void *)OMAP44XX_GPIO3_BASE },
94+ { (void *)OMAP44XX_GPIO4_BASE },
95+ { (void *)OMAP44XX_GPIO5_BASE },
96+ { (void *)OMAP44XX_GPIO6_BASE },
97+};
98+
99+static struct gpio_bank *gpio_bank = &gpio_bank_44xx[0];
100+
101+static inline struct gpio_bank *get_gpio_bank(int gpio)
102+{
103+ return &gpio_bank[gpio >> 5];
104+}
105+
106+static inline int get_gpio_index(int gpio)
107+{
108+ return gpio & 0x1f;
109+}
110+
111+static inline int gpio_valid(int gpio)
112+{
113+ if (gpio < 0)
114+ return -1;
115+ if (gpio < 192)
116+ return 0;
117+ return -1;
118+}
119+
120+static int check_gpio(int gpio)
121+{
122+ if (gpio_valid(gpio) < 0) {
123+ printf("ERROR : check_gpio: invalid GPIO %d\n", gpio);
124+ return -1;
125+ }
126+ return 0;
127+}
128+
129+static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
130+{
131+ void *reg;
132+ u32 l;
133+
134+ reg = bank->base + OMAP4_GPIO_OE;
135+ l = __raw_readl(reg);
136+ if (is_input)
137+ l |= 1 << gpio;
138+ else
139+ l &= ~(1 << gpio);
140+ __raw_writel(l, reg);
141+}
142+
143+void omap_set_gpio_direction(int gpio, int is_input)
144+{
145+ struct gpio_bank *bank;
146+
147+ if (check_gpio(gpio) < 0)
148+ return;
149+ bank = get_gpio_bank(gpio);
150+ _set_gpio_direction(bank, get_gpio_index(gpio), is_input);
151+}
152+
153+static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
154+{
155+ if (enable)
156+ __raw_writel(1 << gpio, bank->base + OMAP4_GPIO_SETDATAOUT);
157+ else
158+ __raw_writel(1 << gpio, bank->base + OMAP4_GPIO_CLEARDATAOUT);
159+}
160+
161+void omap_set_gpio_dataout(int gpio, int enable)
162+{
163+ struct gpio_bank *bank;
164+
165+ if (check_gpio(gpio) < 0)
166+ return;
167+ bank = get_gpio_bank(gpio);
168+ _set_gpio_dataout(bank, get_gpio_index(gpio), enable);
169+}
170+
171+int omap_get_gpio_datain(int gpio)
172+{
173+ struct gpio_bank *bank;
174+
175+ if (check_gpio(gpio) < 0)
176+ return -EINVAL;
177+ bank = get_gpio_bank(gpio);
178+ return (__raw_readl(bank->base + OMAP4_GPIO_DATAIN)
179+ & (1 << get_gpio_index(gpio))) != 0;
180+}
181+
182+static void _reset_gpio(struct gpio_bank *bank, int gpio)
183+{
184+ _set_gpio_direction(bank, get_gpio_index(gpio), 1);
185+}
186+
187+int omap_request_gpio(int gpio)
188+{
189+ if (check_gpio(gpio) < 0)
190+ return -EINVAL;
191+
192+ return 0;
193+}
194+
195+void omap_free_gpio(int gpio)
196+{
197+ struct gpio_bank *bank;
198+
199+ if (check_gpio(gpio) < 0)
200+ return;
201+ bank = get_gpio_bank(gpio);
202+
203+ _reset_gpio(bank, gpio);
204+}
205diff --git a/arch/arm/include/asm/arch-omap4/gpio.h b/arch/arm/include/asm/arch-omap4/gpio.h
206new file mode 100644
207index 0000000..d4dbea4
208--- /dev/null
209+++ b/arch/arm/include/asm/arch-omap4/gpio.h
210@@ -0,0 +1,93 @@
211+/*
212+ * Copyright (c) 2009 Wind River Systems, Inc.
213+ * Tom Rix <Tom.Rix@windriver.com>
214+ *
215+ * This program is free software; you can redistribute it and/or
216+ * modify it under the terms of the GNU General Public License as
217+ * published by the Free Software Foundation; either version 2 of
218+ * the License, or (at your option) any later version.
219+ *
220+ * This program is distributed in the hope that it will be useful,
221+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
222+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
223+ * GNU General Public License for more details.
224+ *
225+ * You should have received a copy of the GNU General Public License
226+ * along with this program; if not, write to the Free Software
227+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
228+ * MA 02111-1307 USA
229+ *
230+ * This work is derived from the linux 2.6.27 kernel source
231+ * To fetch, use the kernel repository
232+ * git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
233+ * Use the v2.6.27 tag.
234+ *
235+ * Below is the original's header including its copyright
236+ *
237+ * linux/arch/arm/plat-omap/gpio.c
238+ *
239+ * Support functions for OMAP GPIO
240+ *
241+ * Copyright (C) 2003-2005 Nokia Corporation
242+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
243+ *
244+ * This program is free software; you can redistribute it and/or modify
245+ * it under the terms of the GNU General Public License version 2 as
246+ * published by the Free Software Foundation.
247+ */
248+#ifndef _GPIO_H
249+#define _GPIO_H
250+
251+#define OMAP4_GPIO_REVISION 0x0000
252+#define OMAP4_GPIO_SYSCONFIG 0x0010
253+#define OMAP4_GPIO_EOI 0x0020
254+#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024
255+#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028
256+#define OMAP4_GPIO_IRQSTATUS0 0x002c
257+#define OMAP4_GPIO_IRQSTATUS1 0x0030
258+#define OMAP4_GPIO_IRQSTATUSSET0 0x0034
259+#define OMAP4_GPIO_IRQSTATUSSET1 0x0038
260+#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c
261+#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040
262+#define OMAP4_GPIO_IRQWAKEN0 0x0044
263+#define OMAP4_GPIO_IRQWAKEN1 0x0048
264+#define OMAP4_GPIO_SYSSTATUS 0x0114
265+#define OMAP4_GPIO_IRQENABLE1 0x011c
266+#define OMAP4_GPIO_WAKE_EN 0x0120
267+#define OMAP4_GPIO_IRQSTATUS2 0x0128
268+#define OMAP4_GPIO_IRQENABLE2 0x012c
269+#define OMAP4_GPIO_CTRL 0x0130
270+#define OMAP4_GPIO_OE 0x0134
271+#define OMAP4_GPIO_DATAIN 0x0138
272+#define OMAP4_GPIO_DATAOUT 0x013c
273+#define OMAP4_GPIO_LEVELDETECT0 0x0140
274+#define OMAP4_GPIO_LEVELDETECT1 0x0144
275+#define OMAP4_GPIO_RISINGDETECT 0x0148
276+#define OMAP4_GPIO_FALLINGDETECT 0x014c
277+#define OMAP4_GPIO_DEBOUNCENABLE 0x0150
278+#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154
279+#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160
280+#define OMAP4_GPIO_SETIRQENABLE1 0x0164
281+#define OMAP4_GPIO_CLEARWKUENA 0x0180
282+#define OMAP4_GPIO_SETWKUENA 0x0184
283+#define OMAP4_GPIO_CLEARDATAOUT 0x0190
284+#define OMAP4_GPIO_SETDATAOUT 0x0194
285+
286+struct gpio_bank {
287+ void *base;
288+};
289+
290+/* This is the interface */
291+
292+/* Request a gpio before using it */
293+int omap_request_gpio(int gpio);
294+/* Reset and free a gpio after using it */
295+void omap_free_gpio(int gpio);
296+/* Sets the gpio as input or output */
297+void omap_set_gpio_direction(int gpio, int is_input);
298+/* Set or clear a gpio output */
299+void omap_set_gpio_dataout(int gpio, int enable);
300+/* Get the value of a gpio input */
301+int omap_get_gpio_datain(int gpio);
302+
303+#endif /* _GPIO_H_ */
304--
3051.6.6.1
306
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0032-omap4-add-support-for-EHCI.patch b/recipes-bsp/u-boot/u-boot/2011.06/0032-omap4-add-support-for-EHCI.patch
deleted file mode 100644
index 9491431e..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0032-omap4-add-support-for-EHCI.patch
+++ /dev/null
@@ -1,322 +0,0 @@
1From a2536d64065297279726a71e0af04a5f677f675c Mon Sep 17 00:00:00 2001
2From: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
3Date: Mon, 9 May 2011 23:04:50 +0200
4Subject: [PATCH 32/35] omap4: add support for EHCI
5
6As board may need some specific support, implement inner functions
7to be called by the boards implementaions of ehci_hcd_start,
8ehci_hcd_stop.
9
10Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
11Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
12---
13 arch/arm/include/asm/arch-omap4/ehci.h | 8 +
14 drivers/usb/host/Makefile | 1 +
15 drivers/usb/host/ehci-omap4.c | 268 ++++++++++++++++++++++++++++++++
16 3 files changed, 277 insertions(+), 0 deletions(-)
17 create mode 100644 arch/arm/include/asm/arch-omap4/ehci.h
18 create mode 100644 drivers/usb/host/ehci-omap4.c
19
20diff --git a/arch/arm/include/asm/arch-omap4/ehci.h b/arch/arm/include/asm/arch-omap4/ehci.h
21new file mode 100644
22index 0000000..fc84f6a
23--- /dev/null
24+++ b/arch/arm/include/asm/arch-omap4/ehci.h
25@@ -0,0 +1,8 @@
26+#ifndef EHCI_H
27+#define EHCI_H
28+
29+int omap4_ehci_hcd_init(void);
30+
31+int omap4_ehci_hcd_stop(void);
32+
33+#endif /* EHCI_H */
34diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
35index 51b2494..5a5b971 100644
36--- a/drivers/usb/host/Makefile
37+++ b/drivers/usb/host/Makefile
38@@ -46,6 +46,7 @@ COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o
39 COBJS-$(CONFIG_USB_EHCI_KIRKWOOD) += ehci-kirkwood.o
40 COBJS-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
41 COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
42+COBJS-$(CONFIG_USB_EHCI_OMAP4) += ehci-omap4.o
43
44 COBJS := $(COBJS-y)
45 SRCS := $(COBJS:.o=.c)
46diff --git a/drivers/usb/host/ehci-omap4.c b/drivers/usb/host/ehci-omap4.c
47new file mode 100644
48index 0000000..19cd286
49--- /dev/null
50+++ b/drivers/usb/host/ehci-omap4.c
51@@ -0,0 +1,268 @@
52+/*
53+ * OMAP4 EHCI port, copied from linux/drivers/usb/host/ehci-omap.c
54+ *
55+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
56+ * Author: Vikram Pandita <vikram.pandita@ti.com>
57+ * Author: Anand Gadiyar <gadiyar@ti.com>
58+ */
59+
60+#include <common.h>
61+#include <usb.h>
62+#include <errno.h>
63+#include <asm/io.h>
64+#include <asm/arch/gpio.h>
65+#include <asm/arch/omap4.h>
66+#include <asm/arch/sys_proto.h>
67+
68+#include "ehci.h"
69+#include "ehci-core.h"
70+
71+#define EHCI_BASE (OMAP44XX_L4_CORE_BASE + 0x64C00)
72+#define UHH_BASE (OMAP44XX_L4_CORE_BASE + 0x64000)
73+#define TLL_BASE (OMAP44XX_L4_CORE_BASE + 0x62000)
74+
75+/* ULPI */
76+#define ULPI_SET(a) (a + 1)
77+#define ULPI_CLR(a) (a + 2)
78+
79+#define ULPI_FUNC_CTRL 0x04
80+
81+#define ULPI_FUNC_CTRL_RESET (1 << 5)
82+
83+/* TLL Register Set */
84+#define OMAP_USBTLL_REVISION (0x00)
85+#define OMAP_USBTLL_SYSCONFIG (0x10)
86+#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8)
87+#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3)
88+#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2)
89+#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1)
90+#define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0)
91+
92+#define OMAP_USBTLL_SYSSTATUS (0x14)
93+#define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0)
94+
95+#define OMAP_USBTLL_IRQSTATUS (0x18)
96+#define OMAP_USBTLL_IRQENABLE (0x1C)
97+
98+#define OMAP_TLL_SHARED_CONF (0x30)
99+#define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6)
100+#define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5)
101+#define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2)
102+#define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1)
103+#define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0)
104+
105+#define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num)
106+#define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11)
107+#define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10)
108+#define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9)
109+#define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8)
110+#define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0)
111+
112+#define OMAP_TLL_ULPI_FUNCTION_CTRL(num) (0x804 + 0x100 * num)
113+#define OMAP_TLL_ULPI_INTERFACE_CTRL(num) (0x807 + 0x100 * num)
114+#define OMAP_TLL_ULPI_OTG_CTRL(num) (0x80A + 0x100 * num)
115+#define OMAP_TLL_ULPI_INT_EN_RISE(num) (0x80D + 0x100 * num)
116+#define OMAP_TLL_ULPI_INT_EN_FALL(num) (0x810 + 0x100 * num)
117+#define OMAP_TLL_ULPI_INT_STATUS(num) (0x813 + 0x100 * num)
118+#define OMAP_TLL_ULPI_INT_LATCH(num) (0x814 + 0x100 * num)
119+#define OMAP_TLL_ULPI_DEBUG(num) (0x815 + 0x100 * num)
120+#define OMAP_TLL_ULPI_SCRATCH_REGISTER(num) (0x816 + 0x100 * num)
121+
122+#define OMAP_TLL_CHANNEL_COUNT 3
123+#define OMAP_TLL_CHANNEL_1_EN_MASK (1 << 1)
124+#define OMAP_TLL_CHANNEL_2_EN_MASK (1 << 2)
125+#define OMAP_TLL_CHANNEL_3_EN_MASK (1 << 4)
126+
127+/* UHH Register Set */
128+#define OMAP_UHH_REVISION (0x00)
129+#define OMAP_UHH_SYSCONFIG (0x10)
130+#define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12)
131+#define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8)
132+#define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3)
133+#define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2)
134+#define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1)
135+#define OMAP_UHH_SYSCONFIG_AUTOIDLE (1 << 0)
136+
137+#define OMAP_UHH_SYSSTATUS (0x14)
138+#define OMAP_UHH_HOSTCONFIG (0x40)
139+#define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0)
140+#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0)
141+#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11)
142+#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12)
143+#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2)
144+#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3)
145+#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4)
146+#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5)
147+#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS (1 << 8)
148+#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9)
149+#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10)
150+
151+/* OMAP4-specific defines */
152+#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR (3 << 2)
153+#define OMAP4_UHH_SYSCONFIG_NOIDLE (1 << 2)
154+
155+#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR (3 << 4)
156+#define OMAP4_UHH_SYSCONFIG_NOSTDBY (1 << 4)
157+#define OMAP4_UHH_SYSCONFIG_SOFTRESET (1 << 0)
158+
159+#define OMAP4_P1_MODE_CLEAR (3 << 16)
160+#define OMAP4_P1_MODE_TLL (1 << 16)
161+#define OMAP4_P1_MODE_HSIC (3 << 16)
162+#define OMAP4_P2_MODE_CLEAR (3 << 18)
163+#define OMAP4_P2_MODE_TLL (1 << 18)
164+#define OMAP4_P2_MODE_HSIC (3 << 18)
165+
166+#define OMAP_REV2_TLL_CHANNEL_COUNT 2
167+
168+#define OMAP_UHH_DEBUG_CSR (0x44)
169+
170+/* EHCI Register Set */
171+#define EHCI_INSNREG04 (0xA0)
172+#define EHCI_INSNREG04_DISABLE_UNSUSPEND (1 << 5)
173+#define EHCI_INSNREG05_ULPI (0xA4)
174+#define EHCI_INSNREG05_ULPI_CONTROL_SHIFT 31
175+#define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT 24
176+#define EHCI_INSNREG05_ULPI_OPSEL_SHIFT 22
177+#define EHCI_INSNREG05_ULPI_REGADD_SHIFT 16
178+#define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8
179+#define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0
180+
181+int omap4_ehci_hcd_init(void)
182+{
183+ unsigned long base = get_timer(0);
184+ unsigned reg = 0, port = 0;
185+ int rc;
186+
187+ /* USB host, with clock from external phy as port 1 UTMI clock */
188+ sr32((void *)0x4A009358, 0, 32, 0x01000002);
189+
190+ /* FSUSB clk */
191+ sr32((void *)0x4a0093d0, 0, 32, 0x2);
192+
193+ /* USB TLL clock */
194+ sr32((void *)0x4a009368, 0, 32, 0x1);
195+
196+ /* enable the 32K, 48M optional clocks and enable the module */
197+ sr32((void *)0x4a0093e0, 0, 32, 0x301);
198+
199+ /* perform TLL soft reset, and wait until reset is complete */
200+ writel(OMAP_USBTLL_SYSCONFIG_SOFTRESET,
201+ TLL_BASE + OMAP_USBTLL_SYSCONFIG);
202+
203+ /* Wait for TLL reset to complete */
204+ while (!(readl(TLL_BASE + OMAP_USBTLL_SYSSTATUS)
205+ & OMAP_USBTLL_SYSSTATUS_RESETDONE))
206+ if (get_timer(base) > CONFIG_SYS_HZ) {
207+ printf("OMAP4 EHCI error: timeout resetting TLL\n");
208+ return -1;
209+ }
210+
211+ writel(OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
212+ OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
213+ OMAP_USBTLL_SYSCONFIG_CACTIVITY,
214+ TLL_BASE + OMAP_USBTLL_SYSCONFIG);
215+
216+ /* Put UHH in NoIdle/NoStandby mode */
217+ reg = readl(UHH_BASE + OMAP_UHH_SYSCONFIG);
218+ reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR;
219+ reg |= OMAP4_UHH_SYSCONFIG_NOIDLE;
220+ reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR;
221+ reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY;
222+ writel(reg, UHH_BASE + OMAP_UHH_SYSCONFIG);
223+
224+ reg = readl(UHH_BASE + OMAP_UHH_HOSTCONFIG);
225+
226+ /* setup ULPI bypass and burst configurations */
227+ reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
228+ | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
229+ | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
230+ reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
231+
232+ /* Clear port mode fields for PHY mode*/
233+ reg &= ~OMAP4_P1_MODE_CLEAR;
234+ reg &= ~OMAP4_P2_MODE_CLEAR;
235+ writel(reg, UHH_BASE + OMAP_UHH_HOSTCONFIG);
236+
237+ /*
238+ * An undocumented "feature" in the OMAP3 EHCI controller,
239+ * causes suspended ports to be taken out of suspend when
240+ * the USBCMD.Run/Stop bit is cleared (for example when
241+ * we do ehci_bus_suspend).
242+ * This breaks suspend-resume if the root-hub is allowed
243+ * to suspend. Writing 1 to this undocumented register bit
244+ * disables this feature and restores normal behavior.
245+ */
246+ writel(EHCI_INSNREG04_DISABLE_UNSUSPEND, EHCI_BASE + EHCI_INSNREG04);
247+
248+ reg = ULPI_FUNC_CTRL_RESET
249+ /* FUNCTION_CTRL_SET register */
250+ | (ULPI_SET(ULPI_FUNC_CTRL) << EHCI_INSNREG05_ULPI_REGADD_SHIFT)
251+ /* Write */
252+ | (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT)
253+ /* PORTn */
254+ | ((port + 1) << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT)
255+ /* start ULPI access*/
256+ | (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT);
257+
258+ base = get_timer(0);
259+
260+ writel(reg, EHCI_BASE + EHCI_INSNREG05_ULPI);
261+
262+ /* Wait for ULPI access completion */
263+ while ((readl(EHCI_BASE + EHCI_INSNREG05_ULPI)
264+ & (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT)))
265+ if (get_timer(base) > CONFIG_SYS_HZ) {
266+ printf("OMAP4 EHCI error: timeout resetting phy\n");
267+ return -1;
268+ }
269+
270+ hccr = (struct ehci_hccr *)(EHCI_BASE);
271+ hcor = (struct ehci_hcor *)((uint32_t) hccr
272+ + HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
273+ return 0;
274+}
275+
276+int omap4_ehci_hcd_stop(void)
277+{
278+ unsigned base = get_timer(0);
279+
280+ writel(OMAP4_UHH_SYSCONFIG_SOFTRESET, UHH_BASE + OMAP_UHH_SYSCONFIG);
281+
282+#if 0
283+ /* We get timeout here */
284+ while (!(readl(UHH_BASE + OMAP_UHH_SYSSTATUS) & (1 << 0)))
285+ if (get_timer(base) > CONFIG_SYS_HZ) {
286+ printf("OMAP4 EHCI error: reset UHH 0 timeout\n");
287+ return -ETIMEDOUT;
288+ }
289+
290+ while (!(readl(UHH_BASE + OMAP_UHH_SYSSTATUS) & (1 << 1)))
291+ if (get_timer(base) > CONFIG_SYS_HZ) {
292+ printf("OMAP4 EHCI error: reset UHH 1 timeout\n");
293+ return -ETIMEDOUT;
294+ }
295+
296+ while (!(readl(UHH_BASE + OMAP_UHH_SYSSTATUS) & (1 << 2)))
297+ if (get_timer(base) > CONFIG_SYS_HZ) {
298+ printf("OMAP4 EHCI error: reset UHH 2 timeout\n");
299+ return -ETIMEDOUT;
300+ }
301+#endif
302+
303+
304+ writel((1 << 1), TLL_BASE + OMAP_USBTLL_SYSCONFIG);
305+
306+ while (!(readl(TLL_BASE + OMAP_USBTLL_SYSSTATUS) & (1 << 0)))
307+ if (get_timer(base) > CONFIG_SYS_HZ) {
308+ printf("OMAP4 EHCI error: reset TLL timeout\n");
309+ return -ETIMEDOUT;
310+ }
311+
312+ /* Disable clocks */
313+ sr32((void *)0x4a0093e0, 0, 32, 0);
314+ sr32((void *)0x4a009368, 0, 32, 0);
315+ sr32((void *)0x4a0093d0, 0, 32, 0);
316+ sr32((void *)0x4A009358, 0, 32, 0);
317+
318+ return 0;
319+}
320--
3211.6.6.1
322
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0033-omap4_panda-add-support-for-EHCI.patch b/recipes-bsp/u-boot/u-boot/2011.06/0033-omap4_panda-add-support-for-EHCI.patch
deleted file mode 100644
index c1c1f0f3..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0033-omap4_panda-add-support-for-EHCI.patch
+++ /dev/null
@@ -1,97 +0,0 @@
1From 0d730b18792cdbd31ec47bd7b5793b26f884c796 Mon Sep 17 00:00:00 2001
2From: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
3Date: Mon, 9 May 2011 23:04:51 +0200
4Subject: [PATCH 33/35] omap4_panda: add support for EHCI
5
6Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
7Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@canonical.com>
8Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
9---
10 board/ti/panda/Makefile | 4 ++-
11 board/ti/panda/ehci-panda.c | 59 +++++++++++++++++++++++++++++++++++++++++++
12 2 files changed, 62 insertions(+), 1 deletions(-)
13 create mode 100644 board/ti/panda/ehci-panda.c
14
15diff --git a/board/ti/panda/Makefile b/board/ti/panda/Makefile
16index 2186403..253567c 100644
17--- a/board/ti/panda/Makefile
18+++ b/board/ti/panda/Makefile
19@@ -25,7 +25,9 @@ include $(TOPDIR)/config.mk
20
21 LIB = $(obj)lib$(BOARD).o
22
23-COBJS := panda.o
24+COBJS-$(CONFIG_USB_EHCI) += ehci-panda.o
25+
26+COBJS := $(COBJS-y) panda.o
27
28 SRCS := $(COBJS:.o=.c)
29 OBJS := $(addprefix $(obj),$(COBJS))
30diff --git a/board/ti/panda/ehci-panda.c b/board/ti/panda/ehci-panda.c
31new file mode 100644
32index 0000000..b1e247c
33--- /dev/null
34+++ b/board/ti/panda/ehci-panda.c
35@@ -0,0 +1,59 @@
36+/*
37+ * OMAP4 EHCI port, copied from linux/drivers/usb/host/ehci-omap.c
38+ *
39+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
40+ * Author: Vikram Pandita <vikram.pandita@ti.com>
41+ * Author: Anand Gadiyar <gadiyar@ti.com>
42+ */
43+
44+#include <asm/arch/gpio.h>
45+#include <asm/arch/ehci.h>
46+
47+#define GPIO_HUB_POWER 1
48+#define GPIO_HUB_NRESET 62
49+
50+int ehci_hcd_init(void)
51+{
52+ unsigned long base = get_timer(0);
53+ unsigned reg = 0, port = 0;
54+ int rc;
55+
56+ /* disable the power to the usb hub prior to init */
57+ rc = omap_request_gpio(GPIO_HUB_POWER);
58+ if (rc < 0) {
59+ printf("Could not request gpio %d\n", GPIO_HUB_POWER);
60+ return rc;
61+ }
62+
63+ rc = omap_request_gpio(GPIO_HUB_NRESET);
64+ if (rc < 0) {
65+ printf("Could not request gpio %d\n", GPIO_HUB_NRESET);
66+ omap_free_gpio(GPIO_HUB_POWER);
67+ return rc;
68+ }
69+
70+ omap_set_gpio_direction(GPIO_HUB_POWER, 0);
71+ omap_set_gpio_dataout(GPIO_HUB_POWER, 0);
72+ omap_set_gpio_direction(GPIO_HUB_NRESET, 0);
73+ omap_set_gpio_dataout(GPIO_HUB_NRESET, 0);
74+ omap_set_gpio_dataout(GPIO_HUB_NRESET, 1);
75+
76+ rc = omap4_ehci_hcd_init();
77+
78+ if (rc < 0)
79+ return rc;
80+
81+ omap_set_gpio_dataout(GPIO_HUB_POWER, 1);
82+
83+ return 0;
84+}
85+
86+int ehci_hcd_stop(void)
87+{
88+ omap4_ehci_hcd_stop();
89+
90+ omap_set_gpio_dataout(GPIO_HUB_POWER, 0);
91+ omap_set_gpio_dataout(GPIO_HUB_NRESET, 0);
92+ omap_free_gpio(GPIO_HUB_POWER);
93+ omap_free_gpio(GPIO_HUB_NRESET);
94+}
95--
961.6.6.1
97
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0034-omap4_panda-adding-support-for-smsc-and-tftp-boot.patch b/recipes-bsp/u-boot/u-boot/2011.06/0034-omap4_panda-adding-support-for-smsc-and-tftp-boot.patch
deleted file mode 100644
index f1ab7fec..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0034-omap4_panda-adding-support-for-smsc-and-tftp-boot.patch
+++ /dev/null
@@ -1,66 +0,0 @@
1From 1005120d214c98fde62dba9365e24519de001f50 Mon Sep 17 00:00:00 2001
2From: Ricardo Salveti de Araujo <ricardo.salveti@canonical.com>
3Date: Thu, 19 May 2011 10:17:15 -0300
4Subject: [PATCH 34/35] omap4_panda: adding support for smsc and tftp boot
5
6Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@canonical.com>
7Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
8---
9 include/configs/omap4_panda.h | 20 +++++++++++++++++++-
10 1 files changed, 19 insertions(+), 1 deletions(-)
11
12diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
13index b4e7f41..0fcdf46 100644
14--- a/include/configs/omap4_panda.h
15+++ b/include/configs/omap4_panda.h
16@@ -120,6 +120,19 @@
17 #define CONFIG_USB_DEVICE 1
18 #define CONFIG_USB_TTY 1
19 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
20+#define CONFIG_CMD_USB 1
21+#define CONFIG_USB_STORAGE 1
22+#define CONFIG_USB_HOST_ETHER 1
23+#define CONFIG_USB_EHCI 1
24+#define CONFIG_USB_EHCI_OMAP4 1
25+#define CONFIG_USB_HOST 1
26+#define CONFIG_USB_ETHER_SMSC95XX 1
27+
28+/* Ethernet */
29+#define CONFIG_NET_MULTI 1
30+#define CONFIG_CMD_PING 1
31+#define CONFIG_CMD_DHCP 1
32+#define CONFIG_BOOTFILE "uImage"
33
34 /* Flash */
35 #define CONFIG_SYS_NO_FLASH 1
36@@ -134,7 +147,6 @@
37 #define CONFIG_CMD_MMC /* MMC support */
38
39 /* Disabled commands */
40-#undef CONFIG_CMD_NET
41 #undef CONFIG_CMD_NFS
42 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */
43 #undef CONFIG_CMD_IMLS /* List all found images */
44@@ -152,6 +164,8 @@
45 "console=ttyS2,115200n8\0" \
46 "usbtty=cdc_acm\0" \
47 "vram=16M\0" \
48+ "usbethaddr=00:02:03:04:05:06\0" \
49+ "hostname=panda\0" \
50 "mmcdev=0\0" \
51 "mmcroot=/dev/mmcblk0p2 rw\0" \
52 "mmcrootfstype=ext3 rootwait\0" \
53@@ -176,6 +190,10 @@
54 "run mmcboot; " \
55 "fi; " \
56 "fi; " \
57+ "fi; " \
58+ "if usb start; then " \
59+ "bootp; "\
60+ "source ${loadaddr};" \
61 "fi"
62
63 #define CONFIG_AUTO_COMPLETE 1
64--
651.6.6.1
66
diff --git a/recipes-bsp/u-boot/u-boot/2011.06/0035-omap4_panda-use-uImage.panda-for-tftp.patch b/recipes-bsp/u-boot/u-boot/2011.06/0035-omap4_panda-use-uImage.panda-for-tftp.patch
deleted file mode 100644
index c4d20589..00000000
--- a/recipes-bsp/u-boot/u-boot/2011.06/0035-omap4_panda-use-uImage.panda-for-tftp.patch
+++ /dev/null
@@ -1,26 +0,0 @@
1From b2ed58548de12a9bd9b23f51ade86793ae44b74f Mon Sep 17 00:00:00 2001
2From: Koen Kooi <koen@dominion.thruhere.net>
3Date: Mon, 11 Jul 2011 09:47:17 +0200
4Subject: [PATCH 35/35] omap4_panda: use uImage.panda for tftp
5
6Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
7---
8 include/configs/omap4_panda.h | 2 +-
9 1 files changed, 1 insertions(+), 1 deletions(-)
10
11diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
12index 0fcdf46..454a6b0 100644
13--- a/include/configs/omap4_panda.h
14+++ b/include/configs/omap4_panda.h
15@@ -132,7 +132,7 @@
16 #define CONFIG_NET_MULTI 1
17 #define CONFIG_CMD_PING 1
18 #define CONFIG_CMD_DHCP 1
19-#define CONFIG_BOOTFILE "uImage"
20+#define CONFIG_BOOTFILE "uImage.panda"
21
22 /* Flash */
23 #define CONFIG_SYS_NO_FLASH 1
24--
251.6.6.1
26
diff --git a/recipes-bsp/u-boot/u-boot/omap3-touchbook/fw_env.config b/recipes-bsp/u-boot/u-boot/omap3-touchbook/fw_env.config
deleted file mode 100644
index a7bfec1e..00000000
--- a/recipes-bsp/u-boot/u-boot/omap3-touchbook/fw_env.config
+++ /dev/null
@@ -1,6 +0,0 @@
1# Configuration file for fw_(printenv/saveenv) utility.
2# Up to two entries are valid, in this case the redundand
3# environment sector is assumed present.
4
5# MTD device name Device offset Env. size Flash sector size
6/dev/mtd2 0x0000 0x20000 0x20000
diff --git a/recipes-bsp/u-boot/u-boot/touchbook-config.patch b/recipes-bsp/u-boot/u-boot/touchbook-config.patch
deleted file mode 100644
index 9af49bff..00000000
--- a/recipes-bsp/u-boot/u-boot/touchbook-config.patch
+++ /dev/null
@@ -1,25 +0,0 @@
1From eb13d25ad907314a5dd712ad7de59ca260968e61 Mon Sep 17 00:00:00 2001
2From: Koen Kooi <koen@dominion.thruhere.net>
3Date: Sat, 8 Jan 2011 19:17:24 +0100
4Subject: [PATCH 10/10] touchbook-config.patch
5
6---
7 board/omap3/beagle/beagle.c | 2 +-
8 1 files changed, 1 insertions(+), 1 deletions(-)
9
10diff --git a/board/omap3/beagle/beagle.c b/board/omap3/beagle/beagle.c
11index d5ec63e..cc6e20d 100644
12--- a/board/omap3/beagle/beagle.c
13+++ b/board/omap3/beagle/beagle.c
14@@ -186,7 +186,7 @@ int board_init(void)
15
16 gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
17 /* board id for Linux */
18- gd->bd->bi_arch_number = MACH_TYPE_OMAP3_BEAGLE;
19+ gd->bd->bi_arch_number = 2393;
20 /* boot param addr */
21 gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
22
23--
241.6.6.1
25
diff --git a/recipes-bsp/u-boot/u-boot_2011.06.bb b/recipes-bsp/u-boot/u-boot_2011.06.bb
deleted file mode 100644
index 4fa8f071..00000000
--- a/recipes-bsp/u-boot/u-boot_2011.06.bb
+++ /dev/null
@@ -1,51 +0,0 @@
1require u-boot.inc
2
3# No patches for other machines yet
4COMPATIBLE_MACHINE = "(beagleboard)"
5
6SRC_URI = "git://git.denx.de/u-boot.git;protocol=git \
7 file://2011.06/0001-OMAP3-Beagle-Pin-Mux-initialization-glitch-fix.patch \
8 file://2011.06/0002-OMAP-Remove-omapfb.debug-y-from-Beagle-and-Overo-env.patch \
9 file://2011.06/0003-OMAP3-beagle-pass-expansionboard-name-in-bootargs.patch \
10 file://2011.06/0004-beagleboard-add-support-for-xM-revision-C.patch \
11 file://2011.06/0005-Add-support-for-SMSC95XX-USB-2.0-10-100MBit-Ethernet.patch \
12 file://2011.06/0006-Add-Ethernet-hardware-MAC-address-framework-to-usbne.patch \
13 file://2011.06/0007-Add-documentation-for-USB-Host-Networking.patch \
14 file://2011.06/0008-dm3730-enable-dpll5.patch \
15 file://2011.06/0009-beagleboard-enable-HUB-power-on-XM-boards.patch \
16 file://2011.06/0010-beagleboard-turn-off-clocks-in-ehci_stop.patch \
17 file://2011.06/0011-beagleboard-enable-networking.patch \
18 file://2011.06/0012-beagleboard-switch-to-ttyO2-as-console.patch \
19 file://2011.06/0013-beagleboard-load-kernel-from-MMC-ext-not-FAT.patch \
20 file://2011.06/0014-beagleboard-enable-asix-driver-and-dhcp.patch \
21 file://2011.06/0015-beagleboard-hardcode-MAC-for-onboard-SMSC-and-use-uI.patch \
22 file://2011.06/0016-beagleboard-decrease-bootdelay-to-2-seconds.patch \
23 file://2011.06/0017-USB-Remove-__attribute__-packed-for-struct-ehci_hccr.patch \
24 file://2011.06/0018-usb-Some-EHCI-chipsets-are-slow-to-respond.patch \
25 file://2011.06/0019-OMAP3-Add-DSS-driver-for-OMAP3.patch \
26 file://2011.06/0020-video-DSS-makefile-update.patch \
27 file://2011.06/0021-BeagleBoard-Configure-DVI-S-video.patch \
28 file://2011.06/0022-BeagleBoard-config-enable-DSS.patch \
29 file://2011.06/0023-BeagleBoard-Added-userbutton-command.patch \
30 file://2011.06/0024-Corrected-LED-name-match-finding-avoiding-extraneous.patch \
31 file://2011.06/0025-BeagleBoard-fix-LED-0-1-in-driver.patch \
32 file://2011.06/0026-led-added-cmd_led-to-Makefile.patch \
33 file://2011.06/0027-led-correct-off-on-locations-in-structure.patch \
34 file://2011.06/0028-BeagleBoard-config-make-mtest-run.patch \
35 file://2011.06/0029-BeagleBoard-config-increase-command-line-functionali.patch \
36 file://2011.06/0030-BeagleBoard-config-add-optargs-buddy-camera.patch \
37 file://2011.06/0031-omap4-add-support-for-gpios.patch \
38 file://2011.06/0032-omap4-add-support-for-EHCI.patch \
39 file://2011.06/0033-omap4_panda-add-support-for-EHCI.patch \
40 file://2011.06/0034-omap4_panda-adding-support-for-smsc-and-tftp-boot.patch \
41 file://2011.06/0035-omap4_panda-use-uImage.panda-for-tftp.patch \
42 file://fw_env.config \
43 "
44# v2011.06 tag -> b1af6f532e0d348b153d5c148369229d24af361a
45SRCREV = "b1af6f532e0d348b153d5c148369229d24af361a"
46PV = "2011.06"
47PR = "r1"
48
49LIC_FILES_CHKSUM = "file://COPYING;md5=1707d6db1d42237583f50183a5651ecb"
50
51S = "${WORKDIR}/git"
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-06-30 20:43:55 +0000