summaryrefslogtreecommitdiffstats
path: root/conf/machine/imx6sxsabreauto.conf
Commit message (Collapse)AuthorAgeFilesLines
* linux-fslc-imx: Update from v6.1 to v6.6Luan Rafael Carneiro2024-04-121-2/+2
| | | | | | | | | | | | | | | | | | | Update linux-fslc-imx from version 6.1 to 6.6. This commit also changes 32-bit imx based machines to add device tree subdirectory. The changed machines are: - conf/machine/imx6qdlsabreauto.conf - conf/machine/imx6qdlsabresd.conf - conf/machine/imx6slevk.conf - conf/machine/imx6sllevk.conf - conf/machine/imx6sxsabreauto.conf - conf/machine/imx6sxsabresd.conf - conf/machine/imx6ulevk.conf - conf/machine/imx6ullevk.conf - conf/machine/imx6ulz-14x14-evk.conf - conf/machine/imx7dsabresd.conf - conf/machine/imx7ulpevk.conf Signed-off-by: Luan Rafael Carneiro <luan.rafael@ossystems.com.br>
* imx*.conf: Drop unused UBOOT_CONFIG[mfgtool]Tom Hochstein2023-07-111-1/+0
| | | | | | | | UBOOT_CONFIG[mfgtool] is no longer used since the following: 88399694 linux-*-mfgtool, u-boot-*-mfgtool: Remove specific recipes Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
* conf/machine: Add NXP WiFi/BT support to NXP boardsTom Hochstein2022-12-271-1/+1
| | | | Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
* Rework machine definitions to reduce duplicationOtavio Salvador2022-02-211-1/+1
| | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* machines: Adjust for using new location of tune files from coreKhem Raj2021-08-181-1/+1
| | | | Signed-off-by: Khem Raj <raj.khem@gmail.com>
* layer: Convert to new override syntaxKhem Raj2021-08-121-2/+2
| | | | Signed-off-by: Khem Raj <raj.khem@gmail.com>
* Rework the u-boot-fslc and u-boot-imx settings logicOtavio Salvador2021-03-241-2/+2
| | | | | | | | | | We need to make it more obvious what is in use, when we support both bootloaders and for it we are now using the _pn suffix for both. This also fixes the WIC_FILE depending on the choice otherwise image build fails. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx6sxsabreauto: Add OP-TEETom Hochstein2021-01-211-5/+11
| | | | | | | Add OP-TEE support. Add optee to MACHINE_FEATURES to enable OP-TEE in u-boot-imx. OP-TEE is currently not supported by u-boot-fslc. Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
* imx6sxsabreauto: Switch virtual/bootloader to u-boot-fslcDaiane Angolini2020-09-111-2/+2
| | | | | | | | | | | | The virtual/bootloader for this board used to be u-boot-imx which does not include the board in COMPATIBLE_MACHINE any more, so the choice is migrate to u-boot-fslc. The error message: ERROR: Nothing PROVIDES 'virtual/bootloader' (but /media/daiane/TRIFORCE/yocto/dunfell/sources/poky/meta/recipes-core/images/core-image-minimal.bb DEPENDS on or otherwise requires it) u-boot-imx PROVIDES virtual/bootloader but was skipped: incompatible with machine imx6sxsabreauto (not in COMPATIBLE_MACHINE) Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
* machine: imx[6,7,8]: update dtb references for 5.4 kernelAndrey Zhizhikin2020-04-161-1/+1
| | | | | | | | | | | | | | | | | | Updated kernel has some DTS files added and some dropped for various i.MX derivatives. Those should be aligned with respective machines in order to deliver proper DTB files, and do not fail the build for those are missing. Device tree files listed in respective machines are those only present in updated 5.4 kernel release from NXP. Derivatives, which relied on those device trees that are discarded from the new kernel release should backport their respective files onto that update. In other words: if after this update the DTS file used for the HW happens to be missing - it should be manually added for that HW, since the default version is no longer provided by NXP in their updated kernel tree. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
* Stop using SERIAL_CONSOLE and switch all boards to SERIAL_CONSOLESMarc Ferland2019-02-081-1/+1
| | | | | | | | | | SERIAL_CONSOLE has been deprecated for a while now (see [1]). This patch fixes the machines that where still using the old variable. [1]: https://www.yoctoproject.org/docs/2.7/ref-manual/ref-manual.html#migration-2.6-serial-console-deprecated Signed-off-by: Marc Ferland <ferlandm@amotus.ca> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* machines: fix dtb build failure when use-mainline-bsp is usedHiraku Toyooka2017-10-051-0/+1
| | | | | | | | | When the use-mainline-bsp is used, dtb files listed in KERNEL_DEVICETREE are different from ones to be build, so the build fails. This patch fixes it by adding KERNEL_DEVICETREE_use_mainline_bsp. Signed-off-by: Hiraku Toyooka <hiraku.toyooka@cybertrust.co.jp> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Upgrade to 2017.07-based releaseOtavio Salvador2017-07-131-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This release provides a huge improvement regarding the support for SPL to more boards. We now uses this and migrated following boards: - imx6qpsabresd -> imx6qdlsabresd - imx6qsabresd -> imx6qdlsabresd - imx6dlsabresd -> imx6qdlsabresd - imx6solosabresd -> imx6qdlsabresd - imx6qpsabreauto -> imx6qdlsabreauto - imx6qsabreauto -> imx6qdlsabreauto - imx6dlsabreauto -> imx6qdlsabreauto - imx6solosabreauto -> imx6qdlsabreauto So now, the 8 boards are covered by 2 machine files. This drastically reduces the build time and allow for a better user experience as we can use the same image to test different boards. In summary an image built for imx6qdlsabresd or imx6qdlsabreauto is capable of run on a its respective board which contains a i.MX6 QuadPlus, Quad, Dual, DualLite or Solo SoC removing the need of a specific image for each SoC type. On top of the official 2017.07 release, following patches are included: 801fd44563 mx6sabreauto: Make Ethernet functional again 8ccb1970b8 wandboard: Set fdt based on board_rev and board_name e6605743e5 mx6sabresd: Enable video interfaces in bootargs e50a2475d4 mx6sabresd: Use LDO dtb file until LDO bypass support is added b1a4715311 mx6slevk: Use LDO dtb file until LDO bypass support is added 957409876b imx: cx9020: try pxe boot, if no vmlinuz on mmc 3608315bf1 imx: cx9020: use fdt_addr_r and ramdisk_addr_r 9a1c960516 mx6sabreauto: Add Falcon mode support 3a279e5fe8 warp: Use PARTUUID to specify the rootfs location 0f9a6703e7 embestmx6boards: Use PARTUUID to specify the rootfs location c877510614 mx6cuboxi: Use PARTUUID to specify the rootfs location 0ada2d6caf wandboard: Use PARTUUID to specify the rootfs location eee442362c mx6sabre: Use PARTUUID to specify the rootfs location 80a56615fa mx6sabreauto: Do not enable WEIM by default 321339efd7 imx: reorganize IMX code as other SOCs 1567ce3edc mmc: fsl_esdhc: drop CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT 40294f880d dm: mmc: fsl_esdhc: handle vqmmc supply 0378edcd02 mmc: fsl_esdhc: introduce vs18_enable for 1.8V fix I/O 3657cae890 mmc: fsl_esdhc: correct type of wp_enable 45103e1030 imx6_spl: Add u-boot-dtb.img for SPL payload 61131fa4b5 mx6sabreauto: Update to SPL only mode 07a667be9b mx6qsabreauto: Add SPL support 4506c859ee mx6cuboxi: Add support for sata a5c5962327 mx7dsabresd: Set VLD04 output to 2.8V in PMIC initialization. 4590f11b61 mx6: soc: Move mxs_dma_init() into the mxs nand driver 10d185960e net: fec_mxc: fix PHY initialization bug with CONFIG_DM_ETH b2d4bf303e icorem6_rqs: Rename icorem6_rqs config file af34708e1e dt-bindings: Document the Broadcom STB wake-up timer node 3e92667cfe serial: mxc: Add debug uart support 4e2b31a5c5 serial: mxc: Code cleanup 27835dae1a serial: mxc: Move common baud gen into _mxc_serial_setbrg 1ca9fe11fd serial: mxc: Move common init into _mxc_serial_init 14ac9d06be serial: mxc: Move cr1 and cr2 write to mxc_serial_setbrg fdd1f0debc serial: mxc: Use RFDIV in dm-code fd008b0569 serial: mxc: Add common mxc_uart reg space 2fd7878124 imx: mx6ull: fix USB bmode for i.MX 6UL and 6ULL 5c72de6152 ot1200: enable CONFIG_IMX_THERMAL for detailed thermal information 8e38f54c56 mx6sabresd: Fix guard file symbol 3320a872b0 wandboard: Remove unnecessary delay d5ae3ce6dd cm_fx6: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS 1325b822da cgtqmx6eval: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS 844365a5a0 mx6slevk_spl: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS ff9e6d62ed mx6sabresd: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Daiane Angolini <daiane.angolini@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* Update machine description fieldsAlexandra Safta2017-01-231-2/+2
| | | | | | | | | Change description fields from Freescale to NXP in machine files to align to 2016 corporate transfer to NXP. Signed-off-by: Alexandra Safta <alexandra-ioana.safta@nxp.com> Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* Convert SOC_FAMILY to MACHINEOVERRIDESOtavio Salvador2016-09-081-2/+2
| | | | | | | | | | The SOC_FAMILY is an indirection which makes the understanding, from OpenEmbedded versed developers and users, more difficult. Instead of using the SOC_FAMILY indirection which is rarely used, we now move to the MACHINEOVERRIDES mechanism as this is in fact what is in use. Change-Id: Ic6e58b79bdc990ac853c87761c3fff635786e4e5 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* machine: Change maintainer email to nxp.com for Lauren PostLauren Post2016-08-231-1/+1
| | | | | Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx6sxsabreauto: Fix nand support using ubifs storageLauren Post2015-07-281-1/+1
| | | | | | | Ubifs storage must be added for nand boot configurations. Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* Move meta-fsl-arm content to layer rootOtavio Salvador2015-07-161-0/+20
The meta-fsl-arm is going to be used as the base for this layer. It contains a clean history and allowing a more granullar set of changes. This commit is just a rename of all contents of meta-fsl-arm subdirectory to this layer's root, subsequent changes are based on top of that. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-06-10 22:55:16 +0000