initial commit of Enea Linux 3.1HEADmaster

Migrated from the internal git server on the dora-enea branch

Signed-off-by: Adrian Dudau <adrian.dudau@enea.com>

7 files changed, 387 insertions, 0 deletions

diff --git a/recipes-test/ddt-runner/files/scripts/p4080ds/ethernet b/recipes-test/ddt-runner/files/scripts/p4080ds/ethernet
new file mode 100755
index 0000000..5355f10
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/p4080ds/ethernet
@@ -0,0 +1,88 @@
+#!/bin/sh
+
+ethernet_interface="eth1"
+ethernet_ping_ipaddr="172.21.3.22"
+ethernet_ipaddr=$1
+
+IFCONFIG=`which ifconfig`
+
+$IFCONFIG $ethernet_interface up
+$IFCONFIG | grep $ethernet_interface
+if [ $? -ne 0 ]; then
+        echo "FAIL: $ethernet_interface is not up"
+        exit 1
+else
+        echo "PASS: $ethernet_interface is up"
+fi
+
+if [ "x$ethernet_ipaddr" != "x" ]; then
+        $IFCONFIG $ethernet_interface $ethernet_ipaddr
+fi
+
+$IFCONFIG $ethernet_interface |grep 'inet addr:' |sed -e 's@inet addr:@@' |sed q | awk '{print $1}'
+if [ $? -ne 0 ]; then
+    echo "FAIL: ipaddr of $ethernet_interface setup failed"
+        exit 1
+else
+        echo "PASS: ipaddr of $ethernet_interface setup success"
+fi
+
+mindatasize=56
+maxdatasize=650
+stepsize=100
+iteration=1
+datasize=$mindatasize
+logfile=`/bin/mktemp`
+statistics=`/bin/mktemp`
+error=0
+
+trap cleanup SIGHUP SIGINT SIGTERM
+
+clean_tasks() {
+        echo "Executing clean up tasks"
+        rm -f $logfile $statistics
+}
+
+cleanup() {
+    echo "Aborting script execution"
+    clean_tasks
+    exit 0
+}
+
+echo "start ping test for $ethernet_interface..."
+
+while [ $datasize -le $maxdatasize ]; do
+    for i in `seq 1 $iteration`; do
+        ping -c 1 -s $datasize $ethernet_ping_ipaddr > $statistics
+        ping_err=`echo $?`
+        echo "" && cat $statistics | grep -r "PING"
+        cat $statistics | grep -r "received"
+        [ `echo $?` -eq 0 ] || packets_received=0 && \
+            packets_received=`cat $statistics | \
+                grep -r "received" | awk '{print$4}'`
+        
+                # Evaluate possible errors on the ping operation
+        if [ $ping_err -ne 0 ] || [ $packets_received -eq 0 ]; then
+            error=1
+            echo -e `cat $statistics | grep -r PING` >> $logfile
+            echo -e "Size: $datasize Iteration: $i\n" >> $logfile
+        fi
+    done
+    let datasize=$datasize+$stepsize
+done
+
+# Report failures
+if [ $error -eq 1 ]; then
+    echo -e "=================== error report ===================\n"
+    cat $logfile
+    echo -e "====================================================\n"
+    clean_tasks
+    echo -e "FAIL: ping test for $ethernet_interface failed\n"
+    exit 1
+else
+        clean_tasks
+        echo -e "PASS: ping test for $ethernet_interface success\n"
+fi
+
+echo "PASS: $ethernet_interface test passed"
+exit 0
diff --git a/recipes-test/ddt-runner/files/scripts/p4080ds/flash b/recipes-test/ddt-runner/files/scripts/p4080ds/flash
new file mode 100755
index 0000000..19f95aa
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/p4080ds/flash
@@ -0,0 +1,20 @@
+#!/bin/sh
+#
+# This script is used to test flash driver functionality. I removed the write
+# operations since all partition are in use in p4080ds and there might be
+# possibility of corrupting data even if we backup in test script.
+
+if part_num=`cat /proc/mtd | grep -c 'mtd'`; then
+    echo "PASS: show $part_num partitions"
+else
+    echo "FAIL: show $part_num partitions"
+fi
+
+for((part=0; part<$part_num-1; part++));
+do
+    if [ $(mtd_debug info /dev/mtd$part | grep -c 'mtd.type') ]; then
+        echo "PASS: show partition $part debug info"
+    else
+        echo "FAIL: show partition $part debug info"
+    fi  
+done
diff --git a/recipes-test/ddt-runner/files/scripts/p4080ds/i2c b/recipes-test/ddt-runner/files/scripts/p4080ds/i2c
new file mode 100755
index 0000000..5b312b9
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/p4080ds/i2c
@@ -0,0 +1,24 @@
+#!/bin/sh
+
+if I2C_ADAPTERS=$(i2cdetect -l |wc -l); then
+        echo "PASS: found $I2C_ADAPTERS i2c adapters"
+else
+        echo "FAIL: no i2c adapters found"
+        exit 1
+fi
+
+if [ -z "$adapters" ]; then
+        adapters=0
+fi
+
+while [ $adapters -lt $I2C_ADAPTERS ]
+do
+        i2cdetect -y $adapters
+        if [ $? -ne 0 ]; then 
+                echo "FAIL: detect i2c adapter $adapters failed"
+        else
+                echo "PASS: detect i2c adapter $adapters success"
+        fi
+        adapters=`expr $adapters + 1`
+        sleep 1
+done
diff --git a/recipes-test/ddt-runner/files/scripts/p4080ds/rtc b/recipes-test/ddt-runner/files/scripts/p4080ds/rtc
new file mode 100755
index 0000000..0d38293
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/p4080ds/rtc
@@ -0,0 +1,42 @@
+#!/bin/sh
+
+RTC_DEVICE="/dev/rtc"
+
+if [ ! -e $RTC_DEVICE ]; then
+        echo "FAIL: rtc device does not exist"
+        exit 1
+else
+        echo "PASS: rtc device exists"
+fi
+
+/sbin/hwclock -f $RTC_DEVICE
+if [ $? -ne 0 ]; then
+        echo "FAIL: rtc device open failed"
+        exit 1
+else
+        echo "PASS: rtc device open success"
+fi
+
+
+/sbin/hwclock --systohc
+if [ $? -ne 0 ]; then
+    echo "FAIL: sync system clock and hardware clock failed"
+    exit 1
+else
+    echo "PASS: sync system clock and hardware clock success"
+fi
+
+RTC_TIME=$(/sbin/hwclock -r |awk '{print $4}')
+echo $RTC_TIME
+SYS_TIME=$(date +%m/%d/%Y-%X |awk '{print $1}' |awk -F- '{print $2}')
+echo $SYS_TIME
+
+if [ "$RTC_TIME" = "$SYS_TIME" ] ; then
+        echo "PASS: system time same with hardware time"
+else
+        echo "FAIL: system time different with hardware time"
+        exit 1
+fi
+
+echo "PASS: rtc test successful"
+exit 0
diff --git a/recipes-test/ddt-runner/files/scripts/p4080ds/sdhc b/recipes-test/ddt-runner/files/scripts/p4080ds/sdhc
new file mode 100755
index 0000000..31a7c2f
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/p4080ds/sdhc
@@ -0,0 +1,65 @@
+#!/bin/sh
+# This script is used to test sdhc functionality for p4080ds.
+# The content of SD will be lost by running this test case.
+
+SDHC_DEVICE="/dev/mmcblk0"
+SDHC_DEVICE_PART="/dev/mmcblk0p1"
+SFDISK=`which sfdisk`
+
+if [ -e $SDHC_DEVICE ]; then
+        echo "PASS: $SDHC_DEVICE device exists"
+else
+        echo "FAIL: $SDHC_DEVICE does not exist"
+        exit 1
+fi
+
+if [ -e $SDHC_DEVICE_PART ]; then
+        echo "PASS: $SDHC_DEVICE_PART device exists"
+elif [ ! -z $SFDISK ]; then
+
+        echo "Try to create a partition"
+
+$SFDISK $SDHC_DEVICE << EOF
+,,L
+EOF
+
+        if [ -e $SDHC_DEVICE_PART ]; then
+                echo "PASS: $SDHC_DEVICE_PART device exists"
+        else
+                echo "FAIL: $SDHC_DEVICE_PART does not exist"
+                exit 1
+        fi
+
+else
+        echo "FAIL: $SDHC_DEVICE_PART does not exist"
+        exit 1
+fi
+
+mount |grep mmcblk0p1
+if [ $? -eq 0 ]; then
+        umount $SDHC_DEVICE_PART
+fi
+
+/sbin/mkfs.ext2 $SDHC_DEVICE_PART
+if [ $? -ne 0 ]; then
+        echo "FAIL: format $SDHC_DEVICE_PART fail"
+        exit 1
+else
+        mkdir -p /mnt/sdhc
+        mount $SDHC_DEVICE_PART /mnt/sdhc
+        if [ $? -ne 0 ]; then
+                echo "FAIL: mount $SDHC_DEVICE_PART fail"
+                exit 1
+        else
+                cp /bin/busybox /mnt/sdhc
+                ls /mnt/sdhc |grep busybox
+                if [ $? -ne 0 ]; then
+                        echo "FAIL: read or write $SDHC_DEVICE_PART fail"
+                        exit 1
+                else
+                        umount $SDHC_DEVICE_PART
+                        echo "PASS: read or write $SDHC_DEVICE_PART success"
+                fi
+        fi
+fi
+
diff --git a/recipes-test/ddt-runner/files/scripts/p4080ds/spi b/recipes-test/ddt-runner/files/scripts/p4080ds/spi
new file mode 100755
index 0000000..b4df851
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/p4080ds/spi
@@ -0,0 +1,48 @@
+#!/bin/sh
+
+#An spi flash M25P80 connect to p4080 cpu by spi bus, so the method
+#is to read/write spi flash to verify whether the spi bus driver worked
+#or not.
+
+MTD_CHAR_DEVICE="/dev/mtd4"
+MTD_BLOCK_DEVICE="/dev/mtdblock4"
+
+if [ ! -e $MTD_CHAR_DEVICE ]; then
+    echo "FAIL: spi flash device $MTD_CHAR_DEVICE does not exist"
+    exit 1
+else
+    echo "PASS: spi flash device $MTD_CHAR_DEVICE exists"
+fi
+
+if [ ! -e $MTD_BLOCK_DEVICE ]; then
+    echo "FAIL: spi flash device $MTD_BLOCK_DEVICE does not exist"
+    exit 1
+else
+    echo "PASS: spi flash device $MTD_BLOCK_DEVICE exists"
+fi
+        
+/usr/sbin/flash_erase -j $MTD_CHAR_DEVICE 0 0
+if [ $? -ne 0 ]; then
+        echo "FAIL: format spi flash device $MTD_BLOCK_DEVICE fail"
+        exit 1
+else
+        mkdir -p /mnt/spi
+        mount -t jffs2 $MTD_BLOCK_DEVICE /mnt/spi
+        if [ $? -ne 0 ]; then
+        echo "FAIL: mount spi flash device $MTD_BLOCK_DEVICE fail"
+        exit 1
+        else
+                cp /bin/busybox /mnt/spi
+                ls /mnt/spi |grep busybox
+                if [ $? -ne 0 ]; then
+                echo "FAIL: read or write spi flash device $MTD_BLOCK_DEVICE fail"
+                exit 1
+                else
+                        umount $MTD_BLOCK_DEVICE
+                echo "PASS: read or write spi flash device $MTD_BLOCK_DEVICE success"
+                fi
+        fi
+fi
+
+echo "PASS: spi bus test passed"
+exit 0
diff --git a/recipes-test/ddt-runner/files/scripts/p4080ds/usb b/recipes-test/ddt-runner/files/scripts/p4080ds/usb
new file mode 100755
index 0000000..970e913
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/p4080ds/usb
@@ -0,0 +1,100 @@
+#!/bin/sh
+#
+# This script is used to test usb functionality for p4080ds.
+#
+
+result=0
+devpath=""
+usbinfo=""
+
+usbutils_is_installed=`which lsusb`
+if [ -z $usbutils_is_installed ]; then
+        echo "FAIL: Cannot find lsusb"
+        exit 1
+fi
+
+usbdev_num=`lsusb | grep -v root\ hub | wc -l`
+if [ $usbdev_num -eq 0 ]; then
+        echo "FAIL: USB device is not connected"
+        exit 1
+else
+        echo "$usbdev_num USB device(s) connected"
+fi
+
+sd=`ls -l /dev/sd[^0-9] | awk '{print $5 $6 "," $10}'`
+if [ -z "$sd" ]; then
+        echo "FAIL: find sd device"
+        exit 1
+else
+        echo "PASS: find sd device"
+fi
+
+HDPARM=`which hdparm`
+if [ -z $HDPARM ]; then
+        result=$?
+        echo "FAIL: find hdparm"
+fi
+        echo "PASS: find hdparm"
+
+for s in $sd
+do
+    devpath=`echo "$s" | awk -F "," '{print "/sys/dev/block/" $1 ":" $2}'`
+    usbinfo=`ls -l $devpath | grep usb`
+
+    if [ -z "$usbinfo" ] ; then
+        continue
+    fi
+    
+    s=`echo "$s" | awk -F "," '{print $3}'`
+
+    echo "Testing $s"
+    $HDPARM -I $s
+    if  [ $? -ne 0 ]; then
+        result=$?
+        echo "FAIL: $HDPARM -I $s Detailed/current information directly from $s"
+    else
+        echo "PASS: $HDPARM -I $s Detailed/current information directly from $s"
+    fi
+    
+    $HDPARM -tT $s
+    if  [ $? -ne 0 ]; then
+        result=$?
+        echo "FAIL: $HDPARM -tT $s Perform device/cache read timings on $s"
+    else
+        echo "PASS: $HDPARM -tT $s Perform device/cache read timings on $s"
+    fi
+
+    mkdir -p /mnt/usb_tmp
+    for partition in `ls "$s"[1-9]`
+    do
+       echo "Testing $partition"
+    
+       mount "$partition" /mnt/usb_tmp
+       if [ $? -ne 0 ]; then
+          result=$?
+          echo "FAIL: mount $s"
+       else
+          echo "PASS: mount $s"
+          dd if=/dev/urandom of=/mnt/usb_tmp/writefile bs=1M count=50
+          if [ $? -ne 0 ]; then
+                result=$?
+                echo "FAIL: write test on $s"
+          else
+                echo "PASS: write test on $s"
+                rm -f /mnt/usb_tmp/writefile
+          fi
+          dd if=$s of=/mnt/usb_tmp/readfile bs=1M count=10
+          if [ $? -ne 0 ]; then
+                result=$?
+                echo "FAIL: read test on $s"
+          else
+                echo "PASS: read test on $s"
+                rm -f /mnt/usb_tmp/readfile
+          fi
+          umount /mnt/usb_tmp
+      fi
+    done
+
+    rm -fr /mnt/usb_tmp
+done
+exit $result