diff options
author | Tudor Florea <tudor.florea@enea.com> | 2014-10-10 00:31:33 +0200 |
---|---|---|
committer | Tudor Florea <tudor.florea@enea.com> | 2014-10-10 00:53:44 +0200 |
commit | cd3411088f6bb4393d79c50b5f7eef3f11a83435 (patch) | |
tree | e1b44fd7c353d9018f489d03f3dea78bc876b94a /recipes-test/ddt-runner/files/scripts/keystone-evm | |
download | meta-enea-daisy-140929.tar.gz |
initial commit for Enea Linux 4.0-140929daisy-140929
Migrated from the internal git server on the daisy-enea-point-release branch
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Diffstat (limited to 'recipes-test/ddt-runner/files/scripts/keystone-evm')
4 files changed, 229 insertions, 0 deletions
diff --git a/recipes-test/ddt-runner/files/scripts/keystone-evm/ethernet b/recipes-test/ddt-runner/files/scripts/keystone-evm/ethernet new file mode 100755 index 0000000..10a74fa --- /dev/null +++ b/recipes-test/ddt-runner/files/scripts/keystone-evm/ethernet | |||
@@ -0,0 +1,88 @@ | |||
1 | #!/bin/sh | ||
2 | |||
3 | ethernet_interface="eth1" | ||
4 | #sestord02 ip address | ||
5 | ethernet_ping_ipaddr="172.21.3.22" | ||
6 | ethernet_ipaddr=$1 | ||
7 | |||
8 | IFCONFIG=`which ifconfig` | ||
9 | |||
10 | $IFCONFIG $ethernet_interface up | ||
11 | $IFCONFIG | grep $ethernet_interface | ||
12 | if [ $? -ne 0 ]; then | ||
13 | echo "FAIL: $ethernet_interface is not up" | ||
14 | exit 1 | ||
15 | else | ||
16 | echo "PASS: $ethernet_interface is up" | ||
17 | fi | ||
18 | |||
19 | if [ "x$ethernet_ipaddr" != "x" ]; then | ||
20 | $IFCONFIG $ethernet_interface $ethernet_ipaddr | ||
21 | fi | ||
22 | |||
23 | $IFCONFIG $ethernet_interface |grep 'inet addr:' |sed -e 's@inet addr:@@' |sed q | awk '{print $1}' | ||
24 | if [ $? -ne 0 ]; then | ||
25 | echo "FAIL: ipaddr of $ethernet_interface setup failed" | ||
26 | exit 1 | ||
27 | else | ||
28 | echo "PASS: ipaddr of $ethernet_interface setup success" | ||
29 | fi | ||
30 | |||
31 | mindatasize=56 | ||
32 | maxdatasize=650 | ||
33 | stepsize=100 | ||
34 | iteration=1 | ||
35 | datasize=$mindatasize | ||
36 | logfile=`/bin/mktemp` | ||
37 | statistics=`/bin/mktemp` | ||
38 | error=0 | ||
39 | |||
40 | trap cleanup SIGHUP SIGINT SIGTERM | ||
41 | |||
42 | clean_tasks() { | ||
43 | echo "Executing clean up tasks" | ||
44 | rm -f $logfile $statistics | ||
45 | } | ||
46 | |||
47 | cleanup() { | ||
48 | echo "Aborting script execution" | ||
49 | clean_tasks | ||
50 | exit 0 | ||
51 | } | ||
52 | |||
53 | echo "start ping test for $ethernet_interface..." | ||
54 | |||
55 | while [ $datasize -le $maxdatasize ]; do | ||
56 | for i in `seq 1 $iteration`; do | ||
57 | ping -c 1 -s $datasize $ethernet_ping_ipaddr > $statistics | ||
58 | ping_err=`echo $?` | ||
59 | echo "" && cat $statistics | grep -r "PING" | ||
60 | cat $statistics | grep -r "received" | ||
61 | [ `echo $?` -eq 0 ] || packets_received=0 && \ | ||
62 | packets_received=`cat $statistics | \ | ||
63 | grep -r "received" | awk '{print$4}'` | ||
64 | |||
65 | # Evaluate possible errors on the ping operation | ||
66 | if [ $ping_err -ne 0 ] || [ $packets_received -eq 0 ]; then | ||
67 | error=1 | ||
68 | echo -e `cat $statistics | grep -r PING` >> $logfile | ||
69 | echo -e "Size: $datasize Iteration: $i\n" >> $logfile | ||
70 | fi | ||
71 | done | ||
72 | let datasize=$datasize+$stepsize | ||
73 | done | ||
74 | |||
75 | # Report failures | ||
76 | if [ $error -eq 1 ]; then | ||
77 | echo -e "=================== error report ===================\n" | ||
78 | cat $logfile | ||
79 | echo -e "====================================================\n" | ||
80 | clean_tasks | ||
81 | echo -e "FAIL: ping test for $ethernet_interface failed\n" | ||
82 | exit 1 | ||
83 | else | ||
84 | clean_tasks | ||
85 | echo -e "PASS: ping test for $ethernet_interface success\n" | ||
86 | fi | ||
87 | |||
88 | exit 0 | ||
diff --git a/recipes-test/ddt-runner/files/scripts/keystone-evm/flash b/recipes-test/ddt-runner/files/scripts/keystone-evm/flash new file mode 100755 index 0000000..ed2a619 --- /dev/null +++ b/recipes-test/ddt-runner/files/scripts/keystone-evm/flash | |||
@@ -0,0 +1,49 @@ | |||
1 | #!/bin/sh | ||
2 | # | ||
3 | # This script is used to test flash driver functionality. I removed the write | ||
4 | # operations since all partition are in use in keystone-evm and there might be | ||
5 | # possibility of corrupting data even if we backup in test script. | ||
6 | |||
7 | if part_num=`cat /proc/mtd | grep -c 'mtd'`; then | ||
8 | echo "PASS: show $part_num partitions" | ||
9 | else | ||
10 | echo "FAIL: show $part_num partitions" | ||
11 | exit 1 | ||
12 | fi | ||
13 | |||
14 | for((part=0; part<$part_num; part++)); | ||
15 | do | ||
16 | if [ $(mtd_debug info /dev/mtd$part | grep -c 'mtd.type') ]; then | ||
17 | echo "PASS: show partition $part debug info" | ||
18 | else | ||
19 | echo "FAIL: show partition $part debug info" | ||
20 | exit 1 | ||
21 | fi | ||
22 | done | ||
23 | |||
24 | READ_TEST=`find / -name mtd_readtest.ko -print` | ||
25 | |||
26 | if [ ! -e $READ_TEST ]; then | ||
27 | echo "FAIL: $READ_TEST does not exist" | ||
28 | exit 1 | ||
29 | else | ||
30 | echo "PASS: $READ_TEST exists" | ||
31 | fi | ||
32 | |||
33 | for((part=0; part<$part_num; part++)); | ||
34 | do | ||
35 | dmesg -c | ||
36 | |||
37 | insmod $READ_TEST dev=$part | ||
38 | |||
39 | finish=`dmesg | grep -c 'mtd_readtest: finished'` | ||
40 | if [ $finish -eq 1 ]; then | ||
41 | echo "PASS: read test $part" | ||
42 | else | ||
43 | echo "FAIL: read test $part" | ||
44 | rmmod $READ_TEST | ||
45 | exit 1 | ||
46 | fi | ||
47 | |||
48 | rmmod $READ_TEST | ||
49 | done | ||
diff --git a/recipes-test/ddt-runner/files/scripts/keystone-evm/i2c b/recipes-test/ddt-runner/files/scripts/keystone-evm/i2c new file mode 100755 index 0000000..fd033bc --- /dev/null +++ b/recipes-test/ddt-runner/files/scripts/keystone-evm/i2c | |||
@@ -0,0 +1,44 @@ | |||
1 | #!/bin/sh | ||
2 | # This script is used to test i2c bus functionality for keystone-evm board. | ||
3 | |||
4 | if I2C_ADAPTERS=$(i2cdetect -l |wc -l); then | ||
5 | echo "PASS: found $I2C_ADAPTERS i2c adapters" | ||
6 | else | ||
7 | echo "FAIL: no i2c adapters found" | ||
8 | exit 1 | ||
9 | fi | ||
10 | |||
11 | if [ -z "$adapters" ]; then | ||
12 | adapters=0 | ||
13 | fi | ||
14 | |||
15 | while [ $adapters -lt $I2C_ADAPTERS ] | ||
16 | do | ||
17 | i2cdetect -y $adapters | ||
18 | if [ $? -ne 0 ]; then | ||
19 | echo "FAIL: detect i2c adapter $adapters failed" | ||
20 | else | ||
21 | echo "PASS: detect i2c adapter $adapters success" | ||
22 | fi | ||
23 | adapters=`expr $adapters + 1` | ||
24 | sleep 1 | ||
25 | done | ||
26 | |||
27 | i2cdetect -y 0 | ||
28 | if [ $? -ne 0 ]; then | ||
29 | echo "FAIL: detect i2c bus 0 fail" | ||
30 | exit 1 | ||
31 | else | ||
32 | echo "PASS: detect i2c bus 0 success" | ||
33 | fi | ||
34 | |||
35 | #i2c bus 0, device address 0x52, DDR3 DIMM Socket 1, SPD EEPROM | ||
36 | i2cdump -f -y 0 0x52 |grep UG51U6400N8SU | ||
37 | if [ $? -ne 0 ]; then | ||
38 | echo "FAIL: read SPD EEPROM on i2c bus 0 fail" | ||
39 | exit 1 | ||
40 | else | ||
41 | echo "PASS: read SPD EEPROM on i2c bus 0 success" | ||
42 | fi | ||
43 | |||
44 | |||
diff --git a/recipes-test/ddt-runner/files/scripts/keystone-evm/spi b/recipes-test/ddt-runner/files/scripts/keystone-evm/spi new file mode 100755 index 0000000..bcebef9 --- /dev/null +++ b/recipes-test/ddt-runner/files/scripts/keystone-evm/spi | |||
@@ -0,0 +1,48 @@ | |||
1 | #!/bin/sh | ||
2 | |||
3 | #An spi flash M25P80 connect to keystone-evm cpu by spi bus, so the method | ||
4 | #is to read/write spi flash to verify whether the spi bus driver worked | ||
5 | #or not. | ||
6 | |||
7 | MTD_CHAR_DEVICE="/dev/mtd4" | ||
8 | MTD_BLOCK_DEVICE="/dev/mtdblock4" | ||
9 | |||
10 | if [ ! -e $MTD_CHAR_DEVICE ]; then | ||
11 | echo "FAIL: spi flash device $MTD_CHAR_DEVICE does not exist" | ||
12 | exit 1 | ||
13 | else | ||
14 | echo "PASS: spi flash device $MTD_CHAR_DEVICE exists" | ||
15 | fi | ||
16 | |||
17 | if [ ! -e $MTD_BLOCK_DEVICE ]; then | ||
18 | echo "FAIL: spi flash device $MTD_BLOCK_DEVICE does not exist" | ||
19 | exit 1 | ||
20 | else | ||
21 | echo "PASS: spi flash device $MTD_BLOCK_DEVICE exists" | ||
22 | fi | ||
23 | |||
24 | /usr/sbin/flash_erase -j $MTD_CHAR_DEVICE 0 0 | ||
25 | if [ $? -ne 0 ]; then | ||
26 | echo "FAIL: format spi flash device $MTD_BLOCK_DEVICE fail" | ||
27 | exit 1 | ||
28 | else | ||
29 | mkdir -p /mnt/spi | ||
30 | mount -t jffs2 $MTD_BLOCK_DEVICE /mnt/spi | ||
31 | if [ $? -ne 0 ]; then | ||
32 | echo "FAIL: mount spi flash device $MTD_BLOCK_DEVICE fail" | ||
33 | exit 1 | ||
34 | else | ||
35 | cp /bin/busybox /mnt/spi | ||
36 | ls /mnt/spi |grep busybox | ||
37 | if [ $? -ne 0 ]; then | ||
38 | echo "FAIL: read or write spi flash device $MTD_BLOCK_DEVICE fail" | ||
39 | exit 1 | ||
40 | else | ||
41 | umount $MTD_BLOCK_DEVICE | ||
42 | echo "PASS: read or write spi flash device $MTD_BLOCK_DEVICE success" | ||
43 | fi | ||
44 | fi | ||
45 | fi | ||
46 | |||
47 | echo "PASS: spi bus test passed" | ||
48 | exit 0 | ||