initial commit for Enea Linux 4.0-140929daisy-140929

Migrated from the internal git server on the daisy-enea-point-release branch

Signed-off-by: Tudor Florea <tudor.florea@enea.com>

10 files changed, 610 insertions, 0 deletions

diff --git a/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/ethernet b/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/ethernet
new file mode 100755
index 0000000..de1d427
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/ethernet
@@ -0,0 +1,88 @@
+#!/bin/sh
+
+ethernet_interface="eth0"
+#sestord02 ip address
+ethernet_ping_ipaddr="172.21.3.22"
+ethernet_ipaddr=$1
+
+IFCONFIG=`which ifconfig`
+
+$IFCONFIG $ethernet_interface up
+$IFCONFIG | grep $ethernet_interface
+if [ $? -ne 0 ]; then
+        echo "FAIL: $ethernet_interface is not up"
+        exit 1
+else
+        echo "PASS: $ethernet_interface is up"
+fi
+
+if [ "x$ethernet_ipaddr" != "x" ]; then
+        $IFCONFIG $ethernet_interface $ethernet_ipaddr
+fi
+
+$IFCONFIG $ethernet_interface |grep 'inet addr:' |sed -e 's@inet addr:@@' |sed q | awk '{print $1}'
+if [ $? -ne 0 ]; then
+    echo "FAIL: ipaddr of $ethernet_interface setup failed"
+        exit 1
+else
+        echo "PASS: ipaddr of $ethernet_interface setup success"
+fi
+
+mindatasize=56
+maxdatasize=650
+stepsize=100
+iteration=1
+datasize=$mindatasize
+logfile=`/bin/mktemp`
+statistics=`/bin/mktemp`
+error=0
+
+trap cleanup SIGHUP SIGINT SIGTERM
+
+clean_tasks() {
+        echo "Executing clean up tasks"
+        rm -f $logfile $statistics
+}
+
+cleanup() {
+    echo "Aborting script execution"
+    clean_tasks
+    exit 0
+}
+
+echo "start ping test for $ethernet_interface..."
+
+while [ $datasize -le $maxdatasize ]; do
+    for i in `seq 1 $iteration`; do
+        ping -c 1 -s $datasize $ethernet_ping_ipaddr > $statistics
+        ping_err=`echo $?`
+        echo "" && cat $statistics | grep -r "PING"
+        cat $statistics | grep -r "received"
+        [ `echo $?` -eq 0 ] || packets_received=0 && \
+            packets_received=`cat $statistics | \
+                grep -r "received" | awk '{print$4}'`
+
+                # Evaluate possible errors on the ping operation
+        if [ $ping_err -ne 0 ] || [ $packets_received -eq 0 ]; then
+            error=1
+            echo -e `cat $statistics | grep -r PING` >> $logfile
+            echo -e "Size: $datasize Iteration: $i\n" >> $logfile
+        fi
+    done
+    let datasize=$datasize+$stepsize
+done
+
+# Report failures
+if [ $error -eq 1 ]; then
+    echo -e "=================== error report ===================\n"
+    cat $logfile
+    echo -e "====================================================\n"
+    clean_tasks
+    echo -e "FAIL: ping test for $ethernet_interface failed\n"
+    exit 1
+else
+        clean_tasks
+        echo -e "PASS: ping test for $ethernet_interface success\n"
+fi
+
+exit 0
diff --git a/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/flash b/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/flash
new file mode 100755
index 0000000..dffac6b
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/flash
@@ -0,0 +1,49 @@
+#!/bin/sh
+#
+# This script is used to test flash driver functionality. I removed the write
+# operations since all partition are in use in p2041rdb and there might be
+# possibility of corrupting data even if we backup in test script.
+
+if part_num=`cat /proc/mtd | grep -c 'mtd'`; then
+    echo "PASS: show $part_num partitions"
+else
+    echo "FAIL: show $part_num partitions"
+    exit 1
+fi
+
+for((part=0; part<$part_num; part++));
+do
+    if [ $(mtd_debug info /dev/mtd$part | grep -c 'mtd.type') ]; then
+        echo "PASS: show partition $part debug info"
+    else
+        echo "FAIL: show partition $part debug info"
+        exit 1
+    fi
+done
+
+READ_TEST=`find / -name mtd_readtest.ko -print`
+
+if [ ! -e $READ_TEST ]; then
+        echo "FAIL: $READ_TEST does not exist"
+        exit 1
+else
+        echo "PASS: $READ_TEST exists"
+fi
+
+for((part=0; part<$part_num; part++));
+do
+    dmesg -c
+
+    insmod $READ_TEST dev=$part
+
+    finish=`dmesg | grep -c 'mtd_readtest: finished'`
+    if [ $finish -eq 1 ]; then
+        echo "PASS: read test $part"
+    else
+        echo "FAIL: read test $part"
+        rmmod $READ_TEST
+        exit 1
+    fi
+
+    rmmod $READ_TEST
+done
diff --git a/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/i2c b/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/i2c
new file mode 100755
index 0000000..3801e9e
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/i2c
@@ -0,0 +1,42 @@
+#!/bin/sh
+# This script is used to test i2c bus functionality for p2041rdb board.
+
+if I2C_ADAPTERS=$(i2cdetect -l |wc -l); then
+        echo "PASS: found $I2C_ADAPTERS i2c adapters"
+else
+        echo "FAIL: no i2c adapters found"
+        exit 1
+fi
+
+if [ -z "$adapters" ]; then
+        adapters=0
+fi
+
+while [ $adapters -lt $I2C_ADAPTERS ]
+do
+        i2cdetect -y $adapters
+        if [ $? -ne 0 ]; then
+                echo "FAIL: detect i2c adapter $adapters failed"
+        else
+                echo "PASS: detect i2c adapter $adapters success"
+        fi
+        adapters=`expr $adapters + 1`
+        sleep 1
+done
+
+i2cdetect -y 0
+if [ $? -ne 0 ]; then
+        echo "FAIL: detect i2c bus 0 fail"
+        exit 1
+else
+        echo "PASS: detect i2c bus 0 success"
+fi
+
+#i2c bus 0, device address 0x52, DDR3 DIMM Socket 1, SPD EEPROM
+i2cdump -f -y 0 0x52 |grep UG51U6400N8SU
+if [ $? -ne 0 ]; then
+        echo "FAIL: read SPD EEPROM on i2c bus 0 fail"
+        exit 1
+else
+        echo "PASS: read SPD EEPROM on i2c bus 0 success"
+fi
diff --git a/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/pci-express b/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/pci-express
new file mode 100755
index 0000000..33189f9
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/pci-express
@@ -0,0 +1,109 @@
+#!/bin/sh
+
+ethernet_interface="eth0"
+#sestord02 ip address
+ethernet_ping_ipaddr="172.21.3.22"
+ethernet_ipaddr=$1
+
+#Intel Corporation 82574L Gigabit Network Card (intel e1000e)
+vendor_id="8086"
+product_id="10d3"
+
+#find vendor id & product id
+lspci -nn |grep $vendor_id:$product_id
+if [ $? -ne 0 ]; then
+        echo "FAIL: pci-e ethernet card device does not exist"
+        exit 1
+else
+        echo "PASS: got pci-e ethernet card device"
+fi
+
+setpci -v -d $vendor_id:$product_id latency_timer=b0
+if [ $? -ne 0 ]; then
+        echo "FAIL: parameter changes to pci config space failed"
+        exit 1
+else
+        echo "PASS: parameter changes to pci config space success"
+fi
+
+IFCONFIG=`which ifconfig`
+
+$IFCONFIG $ethernet_interface up
+$IFCONFIG | grep $ethernet_interface
+if [ $? -ne 0 ]; then
+        echo "FAIL: pci-e ethernet card device $ethernet_interface is not up"
+        exit 1
+else
+        echo "PASS: pci-e ethernet card device $ethernet_interface is up"
+fi
+
+if [ "x$ethernet_ipaddr" != "x" ]; then
+        $IFCONFIG $ethernet_interface $ethernet_ipaddr
+fi
+
+$IFCONFIG $ethernet_interface |grep 'inet addr:' |sed -e 's@inet addr:@@' |sed q | awk '{print $1}'
+if [ $? -ne 0 ]; then
+    echo "FAIL: ipaddr of pci-e ethernet card device $ethernet_interface setup failed"
+        exit 1
+else
+        echo "PASS: ipaddr of pci-e ethernet card device $ethernet_interface setup success"
+fi
+
+mindatasize=56
+maxdatasize=650
+stepsize=100
+iteration=1
+datasize=$mindatasize
+logfile=`/bin/mktemp`
+statistics=`/bin/mktemp`
+error=0
+
+trap cleanup SIGHUP SIGINT SIGTERM
+
+clean_tasks() {
+        echo "Executing clean up tasks"
+        rm -f $logfile $statistics
+}
+
+cleanup() {
+    echo "Aborting script execution"
+    clean_tasks
+    exit 0
+}
+
+echo "start ping test for pci-e ethernet card device $ethernet_interface..."
+
+while [ $datasize -le $maxdatasize ]; do
+    for i in `seq 1 $iteration`; do
+        ping -c 1 -s $datasize $ethernet_ping_ipaddr > $statistics
+        ping_err=`echo $?`
+        echo "" && cat $statistics | grep -r "PING"
+        cat $statistics | grep -r "received"
+        [ `echo $?` -eq 0 ] || packets_received=0 && \
+            packets_received=`cat $statistics | \
+                grep -r "received" | awk '{print$4}'`
+
+                # Evaluate possible errors on the ping operation
+        if [ $ping_err -ne 0 ] || [ $packets_received -eq 0 ]; then
+            error=1
+            echo -e `cat $statistics | grep -r PING` >> $logfile
+            echo -e "Size: $datasize Iteration: $i\n" >> $logfile
+        fi
+    done
+    let datasize=$datasize+$stepsize
+done
+
+# Report failures
+if [ $error -eq 1 ]; then
+    echo -e "=================== error report ===================\n"
+    cat $logfile
+    echo -e "====================================================\n"
+    clean_tasks
+    echo -e "FAIL: ping test for pci-e ethernet card device $ethernet_interface failed\n"
+    exit 1
+else
+        clean_tasks
+        echo -e "PASS: ping test for pci-e ethernet card device $ethernet_interface success\n"
+fi
+
+exit 0
diff --git a/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/rtc b/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/rtc
new file mode 100755
index 0000000..0d38293
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/rtc
@@ -0,0 +1,42 @@
+#!/bin/sh
+
+RTC_DEVICE="/dev/rtc"
+
+if [ ! -e $RTC_DEVICE ]; then
+        echo "FAIL: rtc device does not exist"
+        exit 1
+else
+        echo "PASS: rtc device exists"
+fi
+
+/sbin/hwclock -f $RTC_DEVICE
+if [ $? -ne 0 ]; then
+        echo "FAIL: rtc device open failed"
+        exit 1
+else
+        echo "PASS: rtc device open success"
+fi
+
+
+/sbin/hwclock --systohc
+if [ $? -ne 0 ]; then
+    echo "FAIL: sync system clock and hardware clock failed"
+    exit 1
+else
+    echo "PASS: sync system clock and hardware clock success"
+fi
+
+RTC_TIME=$(/sbin/hwclock -r |awk '{print $4}')
+echo $RTC_TIME
+SYS_TIME=$(date +%m/%d/%Y-%X |awk '{print $1}' |awk -F- '{print $2}')
+echo $SYS_TIME
+
+if [ "$RTC_TIME" = "$SYS_TIME" ] ; then
+        echo "PASS: system time same with hardware time"
+else
+        echo "FAIL: system time different with hardware time"
+        exit 1
+fi
+
+echo "PASS: rtc test successful"
+exit 0
diff --git a/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/sata b/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/sata
new file mode 100755
index 0000000..43a4932
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/sata
@@ -0,0 +1,81 @@
+#!/bin/sh
+#
+#This script is to test sata devices on target
+#
+result=0
+devpath=""
+satainfo=""
+SD=`ls -l /dev/sd[^0-9] | awk '{print $5 $6 "," $10}'`
+if [ -z "$SD" ]; then
+        echo "FAIL: find sata device"
+        exit 1
+else
+        echo "PASS: find sata device"
+fi
+HDPARM=`which hdparm`
+if [ -z $HDPARM ]; then
+        result=$?
+        echo "FAIL: find hdparm"
+fi
+        echo "PASS: find hdparm"
+
+
+for s in  $SD
+ do
+    devpath=`echo "$s" | awk -F "," '{print "/sys/dev/block/" $1 ":" $2}'`
+    satainfo=`ls -l $devpath | grep sata`
+
+    if [ -z "$satainfo" ] ; then
+        continue
+    fi
+    s=`echo "$s" | awk -F "," '{print $3}'`
+
+    echo "testing $s"
+    $HDPARM -I $s
+    if  [ $? -ne 0 ]; then
+        result=$?
+        echo "FAIL:  $HDPARM -I $s Detailed/current information directly from $s"
+    else
+        echo "PASS:  $HDPARM -I $s Detailed/current information directly from $s"
+    fi
+    $HDPARM -tT $s
+    if  [ $? -ne 0 ]; then
+        result=$?
+        echo "FAIL: $HDPARM -tT $s Perform device/cache read timings on $s"
+    else
+        echo "PASS: $HDPARM -tT $s Perform device/cache read timings on $s"
+    fi
+
+
+    mkdir -p  /mnt/sata_tmp
+    for partition in `ls "$s"[1-9]`
+          do
+       mount "$partition"  /mnt/sata_tmp
+       if [ $? -ne 0 ]; then
+          result=$?
+          echo "FAIL: Mount $s"
+       else
+          echo "PASS: Mount $s"
+          dd if=/dev/urandom of=/mnt/sata_tmp/writefile bs=1M count=50
+          if [ $? -ne 0 ]; then
+             result=$?
+             echo "FAIL: write test on $s"
+          else
+             echo "PASS: write test on $s"
+             rm -f /mnt/sata_tmp/writefile
+          fi
+          dd if=$s of=/mnt/sata_tmp/readfile bs=1M count=10
+          if [ $? -ne 0 ]; then
+             result=$?
+             echo "FAIL: read test on $s"
+          else
+             echo "PASS: read test on $s"
+             rm -f /mnt/sata_tmp/readfile
+          fi
+          umount /mnt/sata_tmp
+      fi
+    done
+
+    rm    -fr /mnt/sata_tmp
+done
+exit $result
diff --git a/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/sdhc b/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/sdhc
new file mode 100755
index 0000000..b1bdab2
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/sdhc
@@ -0,0 +1,40 @@
+#!/bin/sh
+
+#the content of SD will be lost by running this test case.
+
+SDHC_DEVICE="/dev/mmcblk0p1"
+
+if [ ! -e $SDHC_DEVICE ]; then
+        echo "FAIL: $SDHC_DEVICE does not exist"
+        exit 1
+else
+        echo "PASS: $SDHC_DEVICE device exists"
+fi
+
+mount |grep mmcblk0p1
+if [ $? -eq 0 ]; then
+        umount $SDHC_DEVICE
+fi
+
+/sbin/mkfs.ext2 $SDHC_DEVICE
+if [ $? -ne 0 ]; then
+        echo "FAIL: format $SDHC_DEVICE fail"
+        exit 1
+else
+        mkdir -p /mnt/sdhc
+        mount $SDHC_DEVICE /mnt/sdhc
+        if [ $? -ne 0 ]; then
+                echo "FAIL: mount $SDHC_DEVICE fail"
+                exit 1
+        else
+                cp /bin/busybox /mnt/sdhc
+                ls /mnt/sdhc |grep busybox
+                if [ $? -ne 0 ]; then
+                        echo "FAIL: read or write $SDHC_DEVICE fail"
+                        exit 1
+                else
+                        umount $SDHC_DEVICE
+                        echo "PASS: read or write $SDHC_DEVICE success"
+                fi
+        fi
+fi
diff --git a/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/spi b/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/spi
new file mode 100755
index 0000000..a601517
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/spi
@@ -0,0 +1,48 @@
+#!/bin/sh
+
+#An spi flash M25P80 connect to b4860qds-64b cpu by spi bus, so the method
+#is to read/write spi flash to verify whether the spi bus driver worked
+#or not.
+
+MTD_CHAR_DEVICE="/dev/mtd2"
+MTD_BLOCK_DEVICE="/dev/mtdblock2"
+
+if [ ! -e $MTD_CHAR_DEVICE ]; then
+    echo "FAIL: spi flash device $MTD_CHAR_DEVICE does not exist"
+    exit 1
+else
+    echo "PASS: spi flash device $MTD_CHAR_DEVICE exists"
+fi
+
+if [ ! -e $MTD_BLOCK_DEVICE ]; then
+    echo "FAIL: spi flash device $MTD_BLOCK_DEVICE does not exist"
+    exit 1
+else
+    echo "PASS: spi flash device $MTD_BLOCK_DEVICE exists"
+fi
+
+/usr/sbin/flash_erase -j $MTD_CHAR_DEVICE 0 0
+if [ $? -ne 0 ]; then
+        echo "FAIL: format spi flash device $MTD_BLOCK_DEVICE fail"
+        exit 1
+else
+        mkdir -p /mnt/spi
+        mount -t jffs2 $MTD_BLOCK_DEVICE /mnt/spi
+        if [ $? -ne 0 ]; then
+                echo "FAIL: mount spi flash device $MTD_BLOCK_DEVICE fail"
+                exit 1
+        else
+                cp /bin/busybox /mnt/spi
+                ls /mnt/spi |grep busybox
+                if [ $? -ne 0 ]; then
+                        echo "FAIL: read or write spi flash device $MTD_BLOCK_DEVICE fail"
+                        exit 1
+                else
+                        umount $MTD_BLOCK_DEVICE
+                        echo "PASS: read or write spi flash device $MTD_BLOCK_DEVICE success"
+                fi
+        fi
+fi
+
+echo "PASS: spi bus test passed"
+exit 0
diff --git a/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/usb b/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/usb
new file mode 100755
index 0000000..017287f
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/usb
@@ -0,0 +1,48 @@
+#!/bin/sh
+#
+#This script is to test usb devices on p2041rdb target
+#
+
+USB_DISK=`ls /dev/sd*[1-9] | sort | tail -n 1`
+
+usbutils_is_installed=`which lsusb`
+if [ -z $usbutils_is_installed ]; then
+        echo "FAIL: Cannot find lsusb"
+        exit 1
+else
+        echo "PASS: usbutils found"
+fi
+
+usbdev_num=`lsusb | grep -v root\ hub | wc -l`
+if [ $usbdev_num -eq 0 ]; then
+        echo "FAIL: USB device is not connected"
+        exit 1
+else
+        echo "PASS: $usbdev_num USB device(s) connected"
+fi
+
+lsusb | grep -v root\ hub
+mkdir -p /mnt/usb_ehci
+mount $USB_DISK /mnt/usb_ehci
+if [ $? -ne 0 ]; then
+        echo "FAIL: Mount USB device failed"
+        exit 1
+else
+        echo "PASS: Mount USB device succeed"
+fi
+
+echo "Begin test usb device..."
+dd if=/dev/urandom of=/mnt/usb_ehci/testfile bs=1M count=50
+if [ $? -ne 0 ]; then
+        echo "FAIL: test failed"
+        rm -f /mnt/usb_ehci_testfile
+        umount /mnt/usb_ehci
+        rm -fr /mnt/usb_ehci
+        exit 1
+fi
+
+echo "PASS: test succeed"
+rm -f /mnt/usb_ehci_testfile
+umount /mnt/usb_ehci
+rm -fr /mnt/usb_ehci
+exit 0
diff --git a/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/watchdog b/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/watchdog
new file mode 100755
index 0000000..165bc12
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/imx6qsabrelite/watchdog
@@ -0,0 +1,63 @@
+#!/bin/sh
+#
+# This script is used to test watchdog functionality for bsc9131rdb.
+
+WATCHDOG=`which watchdog`
+if [ "x$WATCHDOG" != "x" ]; then
+    echo "PASS: watchdog found"
+else
+    echo "FAIL: watchdog not found"
+    exit 1
+fi
+
+WATCHDOG_CONF=/etc/watchdog.conf
+if [ -f $WATCHDOG_CONF  ]; then
+    echo "PASS: watchdog config file found"
+    sed -i '23,23 s/#//' $WATCHDOG_CONF
+else
+    echo "FAIL: watchdog config file not found"
+    exit 1
+fi
+
+$WATCHDOG -v /dev/watchdog
+watchdog_thread=`ps | grep -c 'watchdog -v /dev/watchdog'`
+if [ $watchdog_thread -eq 2 ]; then
+    echo "PASS: Watchdog daemon started successfully"
+else
+    echo "FAIL: Failed to start watchdog daemon"
+    exit 1
+fi
+
+sleep 5s
+
+killall watchdog
+
+retry=0
+while [ $retry -lt 10 ]
+do
+    watchdog_thread=`ps | grep -c 'watchdog -v /dev/watchdog'`
+    if [ $watchdog_thread -eq 1 ]; then
+        echo "PASS: Watchdog daemon stopped successfully"
+        break;
+    fi
+    sleep 1s
+    retry=`expr $retry + 1`
+done
+
+if [ $retry -eq 10 ]; then
+    echo "FAIL: Failed to stop watchdog daemon"
+fi
+
+found=0
+while read line
+do
+    result=`echo $line | grep -c 'still alive after 1 interval'`
+    if [ $result -eq 1 ]; then
+        echo "PASS: Watchdog is still alive after 1 interval"
+        found=1
+    fi
+done < /var/log/messages
+
+if [ $found -eq 0 ]; then
+    echo "FAIL: Watchdog is not alive after 1 interval"
+fi