T1042RDB: Adding ddt testsdaisy-enea-231026

Signed-off-by: Bogdan Oprescu <bogdan.oprescu@enea.com>

9 files changed, 588 insertions, 0 deletions

diff --git a/recipes-test/ddt-runner/files/scripts/t1042rdb/ethernet b/recipes-test/ddt-runner/files/scripts/t1042rdb/ethernet
new file mode 100755
index 0000000..107d102
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/t1042rdb/ethernet
@@ -0,0 +1,83 @@
+#!/bin/sh
+
+ethernet_interface="eth3"
+ethernet_ping_ipaddr="172.21.3.22"
+ethernet_ipaddr=$1
+
+IFCONFIG=`which ifconfig`
+
+$IFCONFIG $ethernet_interface up > /dev/null 2>&1
+$IFCONFIG | grep $ethernet_interface > /dev/null 2>&1
+if [ $? -ne 0 ]; then
+    echo "FAIL: $ethernet_interface is not up"
+    exit 1
+else
+    echo "PASS: $ethernet_interface is up"
+fi
+
+if [ "x$ethernet_ipaddr" != "x" ]; then
+    $IFCONFIG $ethernet_interface $ethernet_ipaddr
+fi
+
+$IFCONFIG $ethernet_interface |grep 'inet addr:' |sed -e 's@inet addr:@@' |sed q | awk '{print $1}' >/dev/null 2>&1
+if [ $? -ne 0 ]; then
+    echo "FAIL: setup $ethernet_interface ipaddr failed"
+    exit 1
+else
+    echo "PASS: setup $ethernet_interface ipaddr succeeded"
+fi
+
+mindatasize=56
+maxdatasize=650
+stepsize=100
+iteration=1
+datasize=$mindatasize
+logfile=`/bin/mktemp`
+statistics=`/bin/mktemp`
+error=0
+
+trap cleanup SIGHUP SIGINT SIGTERM
+
+clean_tasks() {
+    rm -f $logfile $statistics
+}
+
+cleanup() {
+    echo "Aborting script execution"
+    clean_tasks
+    exit 0
+}
+
+while [ $datasize -le $maxdatasize ]; do
+    for i in `seq 1 $iteration`; do
+        ping -c 1 -s $datasize $ethernet_ping_ipaddr > $statistics
+        ping_err=$?
+        cat $statistics | grep "PING" > /dev/null 2>&1
+        cat $statistics | grep "received" > /dev/null 2>&1
+        [ `echo $?` -eq 0 ] || packets_received=0 && \
+            packets_received=`cat $statistics | \
+                grep "received" | awk '{print$4}'`
+
+        # Evaluate possible errors on the ping operation
+        if [ $ping_err -ne 0 ] || [ $packets_received -eq 0 ]; then
+            error=1
+            echo -e `cat $statistics | grep PING` >> $logfile 2>/dev/null
+        fi
+    done
+    let datasize=$datasize+$stepsize
+done
+
+# Report failures
+if [ $error -eq 1 ]; then
+    echo "=================== error report ==================="
+    cat $logfile
+    echo "===================================================="
+    clean_tasks
+    echo -e "FAIL: $ethernet_interface test failed\n"
+    exit 1
+else
+    clean_tasks
+    echo -e "PASS: $ethernet_interface test passed"
+fi
+
+exit 0
diff --git a/recipes-test/ddt-runner/files/scripts/t1042rdb/flash b/recipes-test/ddt-runner/files/scripts/t1042rdb/flash
new file mode 100755
index 0000000..dffac6b
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/t1042rdb/flash
@@ -0,0 +1,49 @@
+#!/bin/sh
+#
+# This script is used to test flash driver functionality. I removed the write
+# operations since all partition are in use in p2041rdb and there might be
+# possibility of corrupting data even if we backup in test script.
+
+if part_num=`cat /proc/mtd | grep -c 'mtd'`; then
+    echo "PASS: show $part_num partitions"
+else
+    echo "FAIL: show $part_num partitions"
+    exit 1
+fi
+
+for((part=0; part<$part_num; part++));
+do
+    if [ $(mtd_debug info /dev/mtd$part | grep -c 'mtd.type') ]; then
+        echo "PASS: show partition $part debug info"
+    else
+        echo "FAIL: show partition $part debug info"
+        exit 1
+    fi
+done
+
+READ_TEST=`find / -name mtd_readtest.ko -print`
+
+if [ ! -e $READ_TEST ]; then
+        echo "FAIL: $READ_TEST does not exist"
+        exit 1
+else
+        echo "PASS: $READ_TEST exists"
+fi
+
+for((part=0; part<$part_num; part++));
+do
+    dmesg -c
+
+    insmod $READ_TEST dev=$part
+
+    finish=`dmesg | grep -c 'mtd_readtest: finished'`
+    if [ $finish -eq 1 ]; then
+        echo "PASS: read test $part"
+    else
+        echo "FAIL: read test $part"
+        rmmod $READ_TEST
+        exit 1
+    fi
+
+    rmmod $READ_TEST
+done
diff --git a/recipes-test/ddt-runner/files/scripts/t1042rdb/i2c b/recipes-test/ddt-runner/files/scripts/t1042rdb/i2c
new file mode 100755
index 0000000..7766e43
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/t1042rdb/i2c
@@ -0,0 +1,43 @@
+#!/bin/sh
+# This script is used to test i2c bus functionality for p2041rdb board.
+
+if I2C_ADAPTERS=$(i2cdetect -l |wc -l); then
+    echo "PASS: found $I2C_ADAPTERS i2c adapters"
+else
+    echo "FAIL: no i2c adapters found"
+    exit 1
+fi
+
+if [ -z "$adapters" ]; then
+    adapters=0
+fi
+
+while [ $adapters -lt $I2C_ADAPTERS ]
+do
+    i2cdetect -y $adapters
+    if [ $? -ne 0 ]; then
+        echo "FAIL: detect i2c adapter $adapters failed"
+    else
+        echo "PASS: detect i2c adapter $adapters success"
+    fi
+    adapters=`expr $adapters + 1`
+    sleep 1
+done
+
+i2cdetect -y 0
+if [ $? -ne 0 ]; then
+    echo "FAIL: detect i2c bus 0 fail"
+    exit 1
+else
+    echo "PASS: detect i2c bus 0 success"
+fi
+
+#i2c bus 0, device address 0x52, DDR3 DIMM Socket 1, SPD EEPROM
+i2cdump -f -y 0 0x51 | grep "EDPAR22QA01"
+if [ $? -ne 0 ]; then
+    echo "FAIL: read SPD EEPROM on i2c bus 0 fail"
+    exit 1
+else
+    echo "PASS: read SPD EEPROM on i2c bus 0 success"
+fi
+
diff --git a/recipes-test/ddt-runner/files/scripts/t1042rdb/pci-express b/recipes-test/ddt-runner/files/scripts/t1042rdb/pci-express
new file mode 100755
index 0000000..c3f720d
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/t1042rdb/pci-express
@@ -0,0 +1,109 @@
+#!/bin/sh
+
+ethernet_interface="eth3"
+#sestord02 ip address
+ethernet_ping_ipaddr="172.21.3.22"
+ethernet_ipaddr=$1
+
+#Intel Corporation 82574L Gigabit Network Card (intel e1000e)
+vendor_id="8086"
+product_id="10d3"
+
+#find vendor id & product id
+lspci -nn | grep $vendor_id:$product_id
+if [ $? -ne 0 ]; then
+        echo "SKIP: no pci-e ethernet card device found"
+        exit 1
+else
+        echo "PASS: got pci-e ethernet card device"
+fi
+
+setpci -v -d $vendor_id:$product_id latency_timer=b0
+if [ $? -ne 0 ]; then
+        echo "FAIL: parameter changes to pci config space failed"
+        exit 1
+else
+        echo "PASS: parameter changes to pci config space success"
+fi
+
+IFCONFIG=`which ifconfig`
+
+$IFCONFIG $ethernet_interface up
+$IFCONFIG | grep $ethernet_interface
+if [ $? -ne 0 ]; then
+        echo "FAIL: pci-e ethernet card device $ethernet_interface is not up"
+        exit 1
+else
+        echo "PASS: pci-e ethernet card device $ethernet_interface is up"
+fi
+
+if [ "x$ethernet_ipaddr" != "x" ]; then
+        $IFCONFIG $ethernet_interface $ethernet_ipaddr
+fi
+
+$IFCONFIG $ethernet_interface | grep 'inet addr:' |sed -e 's@inet addr:@@' |sed q | awk '{print $1}'
+if [ $? -ne 0 ]; then
+    echo "FAIL: ipaddr of pci-e ethernet card device $ethernet_interface setup failed"
+        exit 1
+else
+        echo "PASS: ipaddr of pci-e ethernet card device $ethernet_interface setup success"
+fi
+
+mindatasize=56
+maxdatasize=650
+stepsize=100
+iteration=1
+datasize=$mindatasize
+logfile=`/bin/mktemp`
+statistics=`/bin/mktemp`
+error=0
+
+trap cleanup SIGHUP SIGINT SIGTERM
+
+clean_tasks() {
+        echo "Executing clean up tasks"
+        rm -f $logfile $statistics
+}
+
+cleanup() {
+    echo "Aborting script execution"
+    clean_tasks
+    exit 0
+}
+
+echo "start ping test for pci-e ethernet card device $ethernet_interface..."
+
+while [ $datasize -le $maxdatasize ]; do
+    for i in `seq 1 $iteration`; do
+        ping -c 1 -s $datasize $ethernet_ping_ipaddr > $statistics
+        ping_err=`echo $?`
+        echo "" && cat $statistics | grep "PING"
+        cat $statistics | grep "received"
+        [ `echo $?` -eq 0 ] || packets_received=0 && \
+            packets_received=`cat $statistics | \
+                grep "received" | awk '{print$4}'`
+
+                # Evaluate possible errors on the ping operation
+        if [ $ping_err -ne 0 ] || [ $packets_received -eq 0 ]; then
+            error=1
+            echo -e `cat $statistics | grep PING` >> $logfile
+            echo -e "Size: $datasize Iteration: $i\n" >> $logfile
+        fi
+    done
+    let datasize=$datasize+$stepsize
+done
+
+# Report failures
+if [ $error -eq 1 ]; then
+    echo -e "=================== error report ===================\n"
+    cat $logfile
+    echo -e "====================================================\n"
+    clean_tasks
+    echo -e "FAIL: ping test for pci-e ethernet card device $ethernet_interface failed\n"
+    exit 1
+else
+        clean_tasks
+        echo -e "PASS: ping test for pci-e ethernet card device $ethernet_interface success\n"
+fi
+
+exit 0
diff --git a/recipes-test/ddt-runner/files/scripts/t1042rdb/sata b/recipes-test/ddt-runner/files/scripts/t1042rdb/sata
new file mode 100755
index 0000000..62766b0
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/t1042rdb/sata
@@ -0,0 +1,86 @@
+#!/bin/sh
+
+#
+#This script is to test sata devices on target
+#
+
+result=0
+devpath=""
+satainfo=""
+
+SD=`ls -l /dev/sd[^0-9] 2> /dev/null | awk '{print $5 $6 "," $10}'`
+if [ -z "$SD" ]; then
+        echo "SKIP: no sata device found"
+        exit 1
+else
+        echo "PASS: find sata device"
+fi
+
+HDPARM=`which hdparm`
+if [ -z $HDPARM ]; then
+        result=$?
+        echo "FAIL: find hdparm"
+        exit 1
+else
+        echo "PASS: find hdparm"
+fi
+
+for s in  $SD
+ do
+    devpath=`echo "$s" | awk -F "," '{print "/sys/dev/block/" $1 ":" $2}'`
+    satainfo=`ls -l $devpath | grep sata`
+
+    if [ -z "$satainfo" ] ; then
+        continue
+    fi
+    s=`echo "$s" | awk -F "," '{print $3}'`
+
+    echo "testing $s"
+    $HDPARM -I $s
+    if  [ $? -ne 0 ]; then
+        result=$?
+        echo "FAIL:  $HDPARM -I $s Detailed/current information directly from $s"
+    else
+        echo "PASS:  $HDPARM -I $s Detailed/current information directly from $s"
+    fi
+    $HDPARM -tT $s
+    if  [ $? -ne 0 ]; then
+        result=$?
+        echo "FAIL: $HDPARM -tT $s Perform device/cache read timings on $s"
+    else
+        echo "PASS: $HDPARM -tT $s Perform device/cache read timings on $s"
+    fi
+
+
+    mkdir -p  /mnt/sata_tmp
+    for partition in `ls "$s"[1-9]`
+          do
+       mount "$partition"  /mnt/sata_tmp
+       if [ $? -ne 0 ]; then
+          result=$?
+          echo "FAIL: Mount $s"
+       else
+          echo "PASS: Mount $s"
+          dd if=/dev/urandom of=/mnt/sata_tmp/writefile bs=1M count=50
+          if [ $? -ne 0 ]; then
+            result=$?
+            echo "FAIL: write test on $s"
+          else
+            echo "PASS: write test on $s"
+            rm -f /mnt/sata_tmp/writefile
+          fi
+          dd if=$s of=/mnt/sata_tmp/readfile bs=1M count=10
+          if [ $? -ne 0 ]; then
+            result=$?
+            echo "FAIL: read test on $s"
+          else
+            echo "PASS: read test on $s"
+            rm -f /mnt/sata_tmp/readfile
+          fi
+          umount /mnt/sata_tmp
+      fi
+    done
+
+    rm    -fr /mnt/sata_tmp
+done
+exit $result
diff --git a/recipes-test/ddt-runner/files/scripts/t1042rdb/sdhc b/recipes-test/ddt-runner/files/scripts/t1042rdb/sdhc
new file mode 100755
index 0000000..883c572
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/t1042rdb/sdhc
@@ -0,0 +1,42 @@
+#!/bin/sh
+
+# the content of SD will be lost by running this test case.
+
+SDHC_DEVICE="/dev/mmcblk0"
+
+if [ -b "$SDHC_DEVICE" ]; then
+    echo "PASS: $SDHC_DEVICE device exists"
+else
+    echo "SKIP: $SDHC_DEVICE does not exist"
+    exit 1
+fi
+
+mount | grep mmcblk0p1 > /dev/null 2>&1
+
+if [ $? -eq 0 ]; then
+    umount $SDHC_DEVICE > /dev/null 2>&1
+fi
+
+/sbin/mkfs.ext2 $SDHC_DEVICE > /dev/null 2>&1
+
+if [ $? -ne 0 ]; then
+    echo "FAIL: format $SDHC_DEVICE fail"
+    exit 1
+else
+    mkdir -p /mnt/sdhc > /dev/null 2>&1
+    mount $SDHC_DEVICE /mnt/sdhc > /dev/null 2>&1
+    if [ $? -ne 0 ]; then
+        echo "FAIL: mount $SDHC_DEVICE fail"
+        exit 1
+    else
+        cp /bin/busybox /mnt/sdhc > /dev/null 2>&1
+        ls /mnt/sdhc |grep busybox > /dev/null 2>&1
+        if [ $? -ne 0 ]; then
+            echo "FAIL: read or write $SDHC_DEVICE fail"
+            exit 1
+        else
+            umount $SDHC_DEVICE > /dev/null 2>&1
+            echo "PASS: read or write $SDHC_DEVICE success"
+        fi
+    fi
+fi
diff --git a/recipes-test/ddt-runner/files/scripts/t1042rdb/spi b/recipes-test/ddt-runner/files/scripts/t1042rdb/spi
new file mode 100755
index 0000000..06475a7
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/t1042rdb/spi
@@ -0,0 +1,35 @@
+#!/bin/bash
+
+SPIDEVS=`cat /proc/mtd | grep -e "^mtd" | grep -i spi | gawk -e '{print $1}' | sed 's/://'`
+if [ -z "$SPIDEVS" ]; then
+    echo "SKIP: no spi device found"
+    exit 1
+fi
+
+
+MTD_DEBUG=`which mtd_debug`
+if [ -z "$MTD_DEBUG" ] ; then
+    echo "FAIL: mtd_debug utility not found on the system"
+    exit 1
+fi
+
+ERRCODE=0
+
+for DV in $SPIDEVS ; do
+    FNAME=`cat /proc/mtd | grep $DV | gawk -F\" '{print $2}'`
+    FDEV=/dev/$DV
+    MTDSIZE=`$MTD_DEBUG info $FDEV | grep "mtd.size" | gawk -e '{print $3}'`
+    if [ $MTDSIZE -eq 0 ] ; then
+        echo "SKIP: $FNAME size is $MTDSIZE (skipped)"
+    else
+        $MTD_DEBUG read $FDEV 0 $MTDSIZE /dev/null > /dev/null 2>&1
+        if [ $? -eq 0 ] ; then
+            echo "PASS: \"$FNAME\" read $MTDSIZE bytes"
+        else
+            echo "FAIL: \"$FNAME\" trying to read $MTDSIZE bytes"
+            ERRCODE=2
+        fi
+    fi
+done
+
+exit $ERRCODE
diff --git a/recipes-test/ddt-runner/files/scripts/t1042rdb/usb b/recipes-test/ddt-runner/files/scripts/t1042rdb/usb
new file mode 100755
index 0000000..017287f
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/t1042rdb/usb
@@ -0,0 +1,48 @@
+#!/bin/sh
+#
+#This script is to test usb devices on p2041rdb target
+#
+
+USB_DISK=`ls /dev/sd*[1-9] | sort | tail -n 1`
+
+usbutils_is_installed=`which lsusb`
+if [ -z $usbutils_is_installed ]; then
+        echo "FAIL: Cannot find lsusb"
+        exit 1
+else
+        echo "PASS: usbutils found"
+fi
+
+usbdev_num=`lsusb | grep -v root\ hub | wc -l`
+if [ $usbdev_num -eq 0 ]; then
+        echo "FAIL: USB device is not connected"
+        exit 1
+else
+        echo "PASS: $usbdev_num USB device(s) connected"
+fi
+
+lsusb | grep -v root\ hub
+mkdir -p /mnt/usb_ehci
+mount $USB_DISK /mnt/usb_ehci
+if [ $? -ne 0 ]; then
+        echo "FAIL: Mount USB device failed"
+        exit 1
+else
+        echo "PASS: Mount USB device succeed"
+fi
+
+echo "Begin test usb device..."
+dd if=/dev/urandom of=/mnt/usb_ehci/testfile bs=1M count=50
+if [ $? -ne 0 ]; then
+        echo "FAIL: test failed"
+        rm -f /mnt/usb_ehci_testfile
+        umount /mnt/usb_ehci
+        rm -fr /mnt/usb_ehci
+        exit 1
+fi
+
+echo "PASS: test succeed"
+rm -f /mnt/usb_ehci_testfile
+umount /mnt/usb_ehci
+rm -fr /mnt/usb_ehci
+exit 0
diff --git a/recipes-test/ddt-runner/files/scripts/t1042rdb/watchdog b/recipes-test/ddt-runner/files/scripts/t1042rdb/watchdog
new file mode 100755
index 0000000..2010e3c
--- /dev/null
+++ b/recipes-test/ddt-runner/files/scripts/t1042rdb/watchdog
@@ -0,0 +1,93 @@
+#!/bin/sh
+#
+# This script is used to test watchdog functionality.
+
+WAITTIME=10
+WDPID=0
+
+WATCHDOG=`which watchdog`
+if [ "x$WATCHDOG" != "x" ]; then
+    echo "PASS: watchdog found"
+else
+    echo "FAIL: watchdog not found"
+    exit 1
+fi
+
+WATCHDOG_CONF=/etc/watchdog.conf
+if [ -f $WATCHDOG_CONF  ]; then
+    echo "PASS: watchdog config file found"
+    sed -i '23,23 s/#//' $WATCHDOG_CONF
+else
+    echo "FAIL: watchdog config file not found"
+    exit 1
+fi
+
+# kill any previous instance of watchdog (pkill may be used as well)
+for wpid in `ps ax | grep $WATCHDOG | grep -v grep | awk -e '{print $1}'` ; do
+    kill -KILL $wpid
+done
+
+# wait until all processes are gone
+for wt in `seq 1 $WAITTIME ` ; do
+    sleep 1
+    wd_running=`ps ax | grep $WATCHDOG | grep -v grep | awk -e '{print $1}'`
+
+    if [ -z $wd_running ] ; then
+        break
+    fi
+done
+
+if [ $wt -ge $WAITTIME ] ; then
+    echo "FAIL: Failed to stop the watchdog daemon"
+    exit 1
+fi
+
+# start a fresh watchdog
+$WATCHDOG -v /dev/watchdog
+
+# wait up to $WAITTIME seconds for the process to start
+for wt in `seq 1 $WAITTIME ` ; do
+    sleep 1
+    wd_running=`ps ax | grep $WATCHDOG | grep -v grep | awk -e '{print $1}'`
+    if [ ! -z $wd_running ] ; then
+        WDPID=$wd_running
+        echo "PASS: Watchdog daemon started successfully [$WDPID]"
+        break
+    fi
+
+    echo $wt
+done
+
+if [ $wt -ge $WAITTIME ] ; then
+    echo "FAIL: Failed to start watchdog daemon"
+    exit 1
+fi
+
+logmsg_test()
+{
+    WDCOUNTER1=`cat /var/log/messages | grep watchdog | grep $WDPID | wc -l`
+    sleep 5
+    WDCOUNTER2=`cat /var/log/messages | grep watchdog | grep $WDPID | wc -l`
+
+    if [ $WDCOUNTER2 -gt $WDCOUNTER1 ] ; then
+        return 0
+    fi
+
+    return 1
+}
+
+exit_code=1
+
+# test is performed 2 times because logrotate may step in during those 5sec
+if logmsg_test || logmsg_test ; then
+    echo "PASS: Watchdog is alive"
+    kill -KILL $WDPID > /dev/null 2>&1
+    exit_code=0
+else
+    echo "FAIL: Watchdog is not working"
+    kill -KILL $WDPID > /dev/null 2>&1
+    exit_code=1
+fi
+
+kill -KILL $WDPID > /dev/null 2>&1
+exit $exit_code