1 files changed, 0 insertions, 223 deletions

diff --git a/scripts/contrib/test_build_time.sh b/scripts/contrib/test_build_time.sh
deleted file mode 100755
index 4012ac7ba7..0000000000
--- a/scripts/contrib/test_build_time.sh
+++ /dev/null
@@ -1,223 +0,0 @@
-#!/bin/bash
-
-# Build performance regression test script
-#
-# Copyright 2011 Intel Corporation
-#
-# SPDX-License-Identifier: GPL-2.0-or-later
-#
-# DESCRIPTION
-# This script is intended to be used in conjunction with "git bisect run"
-# in order to find regressions in build time, however it can also be used
-# independently. It cleans out the build output directories, runs a
-# specified worker script (an example is test_build_time_worker.sh) under
-# TIME(1), logs the results to TEST_LOGDIR (default /tmp) and returns a
-# value telling "git bisect run" whether the build time is good (under
-# the specified threshold) or bad (over it). There is also a tolerance
-# option but it is not particularly useful as it only subtracts the
-# tolerance from the given threshold and uses it as the actual threshold.
-#
-# It is also capable of taking a file listing git revision hashes to be
-# test-applied to the repository in order to get past build failures that
-# would otherwise cause certain revisions to have to be skipped; if a
-# revision does not apply cleanly then the script assumes it does not
-# need to be applied and ignores it.
-#
-# Please see the help output (syntax below) for some important setup
-# instructions.
-#
-# AUTHORS
-# Paul Eggleton <paul.eggleton@linux.intel.com>
-
-
-syntax() {
-    echo "syntax: $0 <script> <time> <tolerance> [patchrevlist]"
-    echo ""
-    echo "  script       - worker script file (if in current dir, prefix with ./)"
-    echo "  time         - time threshold (in seconds, suffix m for minutes)"
-    echo "  tolerance    - tolerance (in seconds, suffix m for minutes or % for"
-    echo "                 percentage, can be 0)"
-    echo "  patchrevlist - optional file listing revisions to apply as patches on top"
-    echo ""
-    echo "You must set TEST_BUILDDIR to point to a previously created build directory,"
-    echo "however please note that this script will wipe out the TMPDIR defined in"
-    echo "TEST_BUILDDIR/conf/local.conf as part of its initial setup (as well as your"
-    echo "~/.ccache)"
-    echo ""
-    echo "To get rid of the sudo prompt, please add the following line to /etc/sudoers"
-    echo "(use 'visudo' to edit this; also it is assumed that the user you are running"
-    echo "as is a member of the 'wheel' group):"
-    echo ""
-    echo "%wheel ALL=(ALL) NOPASSWD: /sbin/sysctl -w vm.drop_caches=[1-3]"
-    echo ""
-    echo "Note: it is recommended that you disable crond and any other process that"
-    echo "may cause significant CPU or I/O usage during build performance tests."
-}
-
-# Note - we exit with 250 here because that will tell git bisect run that
-# something bad happened and stop
-if [ "$1" = "" ] ; then
-   syntax
-   exit 250
-fi
-
-if [ "$2" = "" ] ; then
-   syntax
-   exit 250
-fi
-
-if [ "$3" = "" ] ; then
-   syntax
-   exit 250
-fi
-
-if ! [[ "$2" =~ ^[0-9][0-9m.]*$ ]] ; then
-   echo "'$2' is not a valid number for threshold"
-   exit 250
-fi
-
-if ! [[ "$3" =~ ^[0-9][0-9m.%]*$ ]] ; then
-   echo "'$3' is not a valid number for tolerance"
-   exit 250
-fi
-
-if [ "$TEST_BUILDDIR" = "" ] ; then
-   echo "Please set TEST_BUILDDIR to a previously created build directory"
-   exit 250
-fi
-
-if [ ! -d "$TEST_BUILDDIR" ] ; then
-   echo "TEST_BUILDDIR $TEST_BUILDDIR not found"
-   exit 250
-fi
-
-git diff --quiet
-if [ $? != 0 ] ; then
-    echo "Working tree is dirty, cannot proceed"
-    exit 251
-fi
-
-if [ "BB_ENV_PASSTHROUGH_ADDITIONS" != "" ] ; then
-   echo "WARNING: you are running after sourcing the build environment script, this is not recommended"
-fi
-
-runscript=$1
-timethreshold=$2
-tolerance=$3
-
-if [ "$4" != "" ] ; then
-    patchrevlist=`cat $4`
-else
-    patchrevlist=""
-fi
-
-if [[ timethreshold == *m* ]] ; then
-    timethreshold=`echo $timethreshold | sed s/m/*60/ | bc`
-fi
-
-if [[ $tolerance == *m* ]] ; then
-    tolerance=`echo $tolerance | sed s/m/*60/ | bc`
-elif [[ $tolerance == *%* ]] ; then
-    tolerance=`echo $tolerance | sed s/%//`
-    tolerance=`echo "scale = 2; (($tolerance * $timethreshold) / 100)" | bc`
-fi
-
-tmpdir=`grep "^TMPDIR" $TEST_BUILDDIR/conf/local.conf | sed -e 's/TMPDIR[ \t]*=[ \t\?]*"//' -e 's/"//'`
-if [ "x$tmpdir" = "x" ]; then
-    echo "Unable to determine TMPDIR from $TEST_BUILDDIR/conf/local.conf, bailing out"
-    exit 250
-fi
-sstatedir=`grep "^SSTATE_DIR" $TEST_BUILDDIR/conf/local.conf | sed -e 's/SSTATE_DIR[ \t\?]*=[ \t]*"//' -e 's/"//'`
-if [ "x$sstatedir" = "x" ]; then
-    echo "Unable to determine SSTATE_DIR from $TEST_BUILDDIR/conf/local.conf, bailing out"
-    exit 250
-fi
-
-if [ `expr length $tmpdir` -lt 4 ] ; then
-    echo "TMPDIR $tmpdir is less than 4 characters, bailing out"
-    exit 250
-fi
-
-if [ `expr length $sstatedir` -lt 4 ] ; then
-    echo "SSTATE_DIR $sstatedir is less than 4 characters, bailing out"
-    exit 250
-fi
-
-echo -n "About to wipe out TMPDIR $tmpdir, press Ctrl+C to break out...  "
-for i in 9 8 7 6 5 4 3 2 1
-do
-    echo -ne "\x08$i"
-    sleep 1
-done
-echo
-
-pushd . > /dev/null
-
-rm -f pseudodone
-echo "Removing TMPDIR $tmpdir..."
-rm -rf $tmpdir
-echo "Removing TMPDIR $tmpdir-*libc..."
-rm -rf $tmpdir-*libc
-echo "Removing SSTATE_DIR $sstatedir..."
-rm -rf $sstatedir
-echo "Removing ~/.ccache..."
-rm -rf ~/.ccache
-
-echo "Syncing..."
-sync
-sync
-echo "Dropping VM cache..."
-#echo 3 > /proc/sys/vm/drop_caches
-sudo /sbin/sysctl -w vm.drop_caches=3 > /dev/null
-
-if [ "$TEST_LOGDIR" = "" ] ; then
-    logdir="/tmp"
-else
-    logdir="$TEST_LOGDIR"
-fi
-rev=`git rev-parse HEAD`
-logfile="$logdir/timelog_$rev.log"
-echo -n > $logfile
-
-gitroot=`git rev-parse --show-toplevel`
-cd $gitroot
-for patchrev in $patchrevlist ; do
-    echo "Applying $patchrev"
-    patchfile=`mktemp`
-    git show $patchrev > $patchfile
-    git apply --check $patchfile &> /dev/null
-    if [ $? != 0 ] ; then
-        echo " ... patch does not apply without errors, ignoring"
-    else
-        echo "Applied $patchrev" >> $logfile
-        git apply $patchfile &> /dev/null
-    fi
-    rm $patchfile
-done
-
-sync
-echo "Quiescing for 5s..."
-sleep 5
-
-echo "Running $runscript at $rev..."
-timeoutfile=`mktemp`
-/usr/bin/time -o $timeoutfile -f "%e\nreal\t%E\nuser\t%Us\nsys\t%Ss\nmaxm\t%Mk" $runscript 2>&1 | tee -a $logfile
-exitstatus=$PIPESTATUS
-
-git reset --hard HEAD > /dev/null
-popd > /dev/null
-
-timeresult=`head -n1 $timeoutfile`
-cat $timeoutfile | tee -a $logfile
-rm $timeoutfile
-
-if [ $exitstatus != 0 ] ; then
-    # Build failed, exit with 125 to tell git bisect run to skip this rev
-    echo "*** Build failed (exit code $exitstatus), skipping..." | tee -a $logfile
-    exit 125
-fi
-
-ret=`echo "scale = 2; $timeresult > $timethreshold - $tolerance" | bc`
-echo "Returning $ret" | tee -a $logfile
-exit $ret
-