5 files changed, 75 insertions, 3 deletions

diff --git a/meta-yocto-bsp/conf/machine/genericarm64.conf b/meta-yocto-bsp/conf/machine/genericarm64.conf
index 0c78960199..ff0c29d7f3 100644
--- a/meta-yocto-bsp/conf/machine/genericarm64.conf
+++ b/meta-yocto-bsp/conf/machine/genericarm64.conf
@@ -16,9 +16,20 @@ PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
 # Install all the kernel modules into the rootfs
 MACHINE_EXTRA_RRECOMMENDS += "kernel-modules"
 # Install selected pieces of firmware
-MACHINE_EXTRA_RRECOMMENDS += "linux-firmware-wl12xx linux-firmware-wl18xx linux-firmware-rtl-nic"
+MACHINE_EXTRA_RRECOMMENDS += "\
+    linux-firmware-bcm43455 \
+    linux-firmware-wl12xx \
+    linux-firmware-wl18xx \
+    linux-firmware-rtl-nic \
+    ${@bb.utils.contains_any('DISTRO_FEATURES', 'opencl opengl vulkan', 'linux-firmware-qcom-adreno-a660 linux-firmware-qcom-qcm6490-adreno', '', d)} \
+    ${@bb.utils.contains('DISTRO_FEATURES', 'wifi', 'linux-firmware-ath11k-wcn6750 linux-firmware-qcom-qcm6490-wifi', '', d)} \
+    ${@bb.utils.contains('DISTRO_FEATURES', 'bluetooth', 'linux-firmware-qca-wcn6750', '', d)} \
+    linux-firmware-qcom-qcm6490-audio \
+    linux-firmware-qcom-qcm6490-compute \
+    linux-firmware-qcom-vpu \
+"
 # increase default size since we install a lot of kernel drivers and firmware by default
-INITRAMFS_MAXSIZE = "200000"
+INITRAMFS_MAXSIZE = "260000"
 
 # Use an initramfs and populate it with the kernel modules and key firmware
 INITRAMFS_IMAGE ?= "core-image-initramfs-boot"
diff --git a/meta-yocto-bsp/lib/oeqa/runtime/cases/parselogs-ignores-genericarm64.txt b/meta-yocto-bsp/lib/oeqa/runtime/cases/parselogs-ignores-genericarm64.txt
index 3e96a172da..3dc12d34ec 100644
--- a/meta-yocto-bsp/lib/oeqa/runtime/cases/parselogs-ignores-genericarm64.txt
+++ b/meta-yocto-bsp/lib/oeqa/runtime/cases/parselogs-ignores-genericarm64.txt
@@ -1,3 +1,4 @@
+# AMD KV260 with u-boot 2025.10rc2 based firmware
 # safe to ignore minor firmware issue
 zynqmp-pinctrl firmware:zynqmp-firmware:pinctrl: failed to set: pin
 zynqmp-pinctrl firmware:zynqmp-firmware:pinctrl: set mux failed for pin
@@ -9,3 +10,51 @@ Error applying setting, reverse things back
 Can't lookup blockdev
 # X11 fails to start without connected display
 modeset(0): failed to set mode: Invalid argument
+
+# Rockpi4b with u-boot 2025.10rc2 based firmware
+memory-controller: probe with driver rk3399-dmc-freq failed with error
+probe with driver rockchip-pcie failed with error
+platform hdmi-sound: deferred probe pending: asoc-simple-card: parse error
+deferred probe pending: rockchip-spi: Failed to request optional TX DMA channel
+platform sound: deferred probe pending: asoc-audio-graph-card: parse error
+platform sound-dit: deferred probe pending: asoc-audio-graph-card: parse error
+
+# AMD zcu102 with u-boot 2025.10rc2 based firmware
+# optee not available on all devices
+optee firmware:optee: probe with driver optee failed with error
+# SPI device probe error
+spi_master spi0: Failed to create SPI device for
+# PHY clock not correct
+deferred probe pending: xilinx-psgtr: Failed to get ref clock
+
+# TI k3 am62p5-sk with u-boot 2024.04-ti
+# small issue in devicetree
+OPP table can't be empty
+
+# NXP imx8mp verdin with u-boot 2025.10rc2
+# RTC detection issue
+oscillator failed, set time!
+# uart issue
+serial: failed to get ipg clk
+# GPIO driver/dt issue
+failed writing register: -6
+# Audio codec issue
+nau8822 3-001a: Failed to issue reset
+# Audio devicetree issue
+platform sound: deferred probe pending: asoc-simple-card: parse error
+
+# Broadcom Rpi4 with u-boot 2025.10rc2
+# wifi firmware issue
+Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin failed
+
+# Qualcomm rb3gen2 with u-boot 2025.10rc2 based firmware
+# PMIC issue
+qcom_pmic_glink pmic-glink: Failed to create device link
+# i2c issue
+geni_i2c 980000.i2c: error -ENXIO: Invalid proto
+geni_i2c 984000.i2c: error -ENXIO: Invalid proto
+# wifi issues
+ath11k 17a10040.wifi: failed to get rproc:
+# drm issue
+auxiliary aux_bridge.aux_bridge.0: deferred probe pending: aux_bridge.aux_bridge: failed to acquire drm_bridge
+auxiliary pmic_glink.altmode.0: deferred probe pending: pmic_glink_altmode.pmic_glink_altmode: failed to acquire retimer-switch for port
diff --git a/meta-yocto-bsp/lib/oeqa/selftest/cases/systemd_boot.py b/meta-yocto-bsp/lib/oeqa/selftest/cases/systemd_boot.py
index 781763d1f1..961d4ea31d 100644
--- a/meta-yocto-bsp/lib/oeqa/selftest/cases/systemd_boot.py
+++ b/meta-yocto-bsp/lib/oeqa/selftest/cases/systemd_boot.py
@@ -18,7 +18,7 @@ class Systemdboot(OESelftestTestCase):
 
         # Set EFI_PROVIDER = "systemdboot" and MACHINE = "genericx86-64" in conf/local.conf
         features = 'EFI_PROVIDER = "systemd-boot"\n'
-        features += 'MACHINE = "genericx86-64"\n'
+        features += 'MACHINE:forcevariable = "genericx86-64"\n'
         features += 'IMAGE_FSTYPES += "wic"\n'
         features += 'COMPATIBLE_MACHINE:pn-ssh-pregen-hostkeys:genericx86-64 = "genericx86-64"\n'
         self.append_config(features)
diff --git a/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_6.16.bbappend b/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_6.16.bbappend
index d28ea78e5c..f1d2fed712 100644
--- a/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_6.16.bbappend
+++ b/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_6.16.bbappend
@@ -8,3 +8,4 @@ KMACHINE:genericx86 ?= "common-pc"
 KMACHINE:genericx86-64 ?= "common-pc-64"
 
 KBRANCH:genericarm64 ?= "v6.16/standard/genericarm64"
+SRCREV_machine:genericarm64 ?= "7bd612290b2fef381423e17481e755319cf49993"
diff --git a/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_6.17.bbappend b/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_6.17.bbappend
new file mode 100644
index 0000000000..603a967f2a
--- /dev/null
+++ b/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_6.17.bbappend
@@ -0,0 +1,11 @@
+COMPATIBLE_MACHINE:genericarm64 = "genericarm64"
+COMPATIBLE_MACHINE:beaglebone-yocto = "beaglebone-yocto"
+COMPATIBLE_MACHINE:genericx86 = "genericx86"
+COMPATIBLE_MACHINE:genericx86-64 = "genericx86-64"
+
+KMACHINE:beaglebone-yocto ?= "beaglebone"
+KMACHINE:genericx86 ?= "common-pc"
+KMACHINE:genericx86-64 ?= "common-pc-64"
+
+KBRANCH:genericarm64 ?= "v6.17/standard/genericarm64"
+SRCREV_machine:genericarm64 ?= "459fdea93914f4db040bd8ebf8bce134a4cd6388"