1 files changed, 0 insertions, 89 deletions

diff --git a/meta-yocto-bsp/lib/oeqa/controllers/edgeroutertarget.py b/meta-yocto-bsp/lib/oeqa/controllers/edgeroutertarget.py
deleted file mode 100644
index e31670db48..0000000000
--- a/meta-yocto-bsp/lib/oeqa/controllers/edgeroutertarget.py
+++ /dev/null
@@ -1,89 +0,0 @@
-# Copyright (C) 2014 Intel Corporation
-#
-# Released under the MIT license (see COPYING.MIT)
-
-# This module adds support to testimage.bbclass to deploy images and run
-# tests on a Ubiquiti Networks EdgeRouter Lite. The device must be set up
-# to boot into the master image already - the easiest way to do that is as
-# follows:
-#
-# 1. Take out the internal USB drive and plug it into your PC
-# 2. Repartition the USB drive so that you have three partitions in this
-#    order:
-#      1: vfat, labelled "boot" (it will need to be formatted with mkfs.vfat
-#         for this to be possible, since FAT partitions formatted under
-#         DOS/Windows will only support uppercase labels)
-#      2: ext3 (for master image) labelled "testmaster"
-#      3: ext3 (for image under test) labelled "testrootfs"
-# 3. Copy the kernel to be used by the master image to the FAT partition
-#    (it should be named "vmlinux.64" with the factory u-boot configuration)
-# 4. Install the master image onto the "testmaster" ext3 partition. If
-#    you do this by just extracting the contents of an image onto the
-#    partition, you will also likely need to create the master image marker
-#    file /etc/masterimage within this partition so that we can tell when
-#    we're booted into it that it is the master image.
-# 5. Put the USB drive back into the device, and ensure the console port
-#    and first ethernet port are connected before powering on
-#
-# TEST_SERIALCONTROL_CMD will need to be set in local.conf so that we can
-# interact with u-boot over the serial console port.
-
-import os
-import bb
-import time
-import subprocess
-import sys
-import pexpect
-
-from oeqa.controllers.controllerimage import ControllerImageHardwareTarget
-
-
-class EdgeRouterTarget(ControllerImageHardwareTarget):
-
-    def __init__(self, d):
-        super(EdgeRouterTarget, self).__init__(d)
-
-        self.image_fstype = self.get_image_fstype(d)
-        self.deploy_cmds = [
-                'mount -L boot /boot',
-                'mkdir -p /mnt/testrootfs',
-                'mount -L testrootfs /mnt/testrootfs',
-                'cp ~/test-kernel /boot',
-                'rm -rf /mnt/testrootfs/*',
-                'tar xvf ~/test-rootfs.%s -C /mnt/testrootfs' % self.image_fstype
-                ]
-        if not self.serialcontrol_cmd:
-            bb.fatal("This TEST_TARGET needs a TEST_SERIALCONTROL_CMD defined in local.conf.")
-
-
-    def _deploy(self):
-        self.controller.run("umount /mnt/testrootfs;")
-        self.controller.ignore_status = False
-        self.controller.copy_to(self.kernel, "~/test-kernel")
-        self.controller.copy_to(self.rootfs, "~/test-rootfs.%s" % self.image_fstype)
-        for cmd in self.deploy_cmds:
-            self.controller.run(cmd)
-
-    def _start(self, params=None):
-        self.power_cycle(self.controller)
-        try:
-            serialconn = pexpect.spawn(self.serialcontrol_cmd, env=self.origenv, logfile=sys.stdout)
-            serialconn.expect("U-Boot")
-            serialconn.sendline("a")
-            serialconn.expect("Octeon ubnt_e100#")
-            serialconn.sendline("fatload usb 0:1 $loadaddr test-kernel")
-            serialconn.expect(" bytes read")
-            serialconn.expect("Octeon ubnt_e100#")
-            serialconn.sendline("bootoctlinux $loadaddr coremask=0x3 root=/dev/sda3 rw rootwait mtdparts=phys_mapped_flash:512k(boot0),512k(boot1),64k@3072k(eeprom)")
-            serialconn.expect("login:", timeout=120)
-            serialconn.close()
-        except pexpect.ExceptionPexpect as e:
-            bb.fatal('Serial interaction failed: %s' % str(e))
-
-    def _wait_until_booted(self):
-        try:
-            serialconn = pexpect.spawn(self.serialcontrol_cmd, env=self.origenv, logfile=sys.stdout)
-            serialconn.expect("login:", timeout=120)
-            serialconn.close()
-        except pexpect.ExceptionPexpect as e:
-            bb.fatal('Serial interaction failed: %s' % str(e))