1 files changed, 36 insertions, 36 deletions

diff --git a/documentation/overview-manual/concepts.rst b/documentation/overview-manual/concepts.rst
index e5bdcdad2a..ab882ff778 100644
--- a/documentation/overview-manual/concepts.rst
+++ b/documentation/overview-manual/concepts.rst
@@ -332,7 +332,7 @@ created by an autobuilder:
    One useful scenario for using the ``conf/site.conf`` file is to
    extend your :term:`BBPATH` variable
    to include the path to a ``conf/site.conf``. Then, when BitBake looks
-   for Metadata using ``BBPATH``, it finds the ``conf/site.conf`` file
+   for Metadata using :term:`BBPATH`, it finds the ``conf/site.conf`` file
    and applies your common configurations found in the file. To override
    configurations in a particular build directory, alter the similar
    configurations within that build directory's ``conf/local.conf``
@@ -532,7 +532,7 @@ to build software. A combination of the two is also possible.
 
 BitBake uses the :term:`SRC_URI`
 variable to point to source files regardless of their location. Each
-recipe must have a ``SRC_URI`` variable that points to the source.
+recipe must have a :term:`SRC_URI` variable that points to the source.
 
 Another area that plays a significant role in where source files come
 from is pointed to by the
@@ -540,13 +540,13 @@ from is pointed to by the
 a cache that can hold previously downloaded source. You can also
 instruct the OpenEmbedded build system to create tarballs from Git
 repositories, which is not the default behavior, and store them in the
-``DL_DIR`` by using the
+:term:`DL_DIR` by using the
 :term:`BB_GENERATE_MIRROR_TARBALLS`
 variable.
 
-Judicious use of a ``DL_DIR`` directory can save the build system a trip
+Judicious use of a :term:`DL_DIR` directory can save the build system a trip
 across the Internet when looking for files. A good method for using a
-download directory is to have ``DL_DIR`` point to an area outside of
+download directory is to have :term:`DL_DIR` point to an area outside of
 your Build Directory. Doing so allows you to safely delete the Build
 Directory if needed without fear of removing any downloaded source file.
 
@@ -747,7 +747,7 @@ Build Directory's hierarchy:
    architecture of the built package or packages. Depending on the
    eventual destination of the package or packages (i.e. machine
    architecture, :term:`Build Host`, SDK, or
-   specific machine), ``PACKAGE_ARCH`` varies. See the variable's
+   specific machine), :term:`PACKAGE_ARCH` varies. See the variable's
    description for details.
 
 -  :term:`TARGET_OS`: The operating
@@ -756,7 +756,7 @@ Build Directory's hierarchy:
 
 -  :term:`PN`: The name of the recipe used
    to build the package. This variable can have multiple meanings.
-   However, when used in the context of input files, ``PN`` represents
+   However, when used in the context of input files, :term:`PN` represents
    the name of the recipe.
 
 -  :term:`WORKDIR`: The location
@@ -773,7 +773,7 @@ Build Directory's hierarchy:
    files for a given recipe.
 
    -  :term:`BPN`: The name of the recipe
-      used to build the package. The ``BPN`` variable is a version of
+      used to build the package. The :term:`BPN` variable is a version of
       the ``PN`` variable but with common prefixes and suffixes removed.
 
    -  :term:`PV`: The version of the
@@ -803,13 +803,13 @@ and the :term:`FILESPATH` variable
 to locate applicable patch files.
 
 Default processing for patch files assumes the files have either
-``*.patch`` or ``*.diff`` file types. You can use ``SRC_URI`` parameters
+``*.patch`` or ``*.diff`` file types. You can use :term:`SRC_URI` parameters
 to change the way the build system recognizes patch files. See the
 :ref:`ref-tasks-patch` task for more
 information.
 
 BitBake finds and applies multiple patches for a single recipe in the
-order in which it locates the patches. The ``FILESPATH`` variable
+order in which it locates the patches. The :term:`FILESPATH` variable
 defines the default set of directories that the build system uses to
 search for patch files. Once found, patches are applied to the recipe's
 source files, which are located in the
@@ -877,12 +877,12 @@ This step in the build process consists of the following tasks:
    :ref:`ref-tasks-compile` task.
    Compilation occurs in the directory pointed to by the
    :term:`B` variable. Realize that the
-   ``B`` directory is, by default, the same as the
+   :term:`B` directory is, by default, the same as the
    :term:`S` directory.
 
 -  *do_install*: After compilation completes, BitBake executes the
    :ref:`ref-tasks-install` task.
-   This task copies files from the ``B`` directory and places them in a
+   This task copies files from the :term:`B` directory and places them in a
    holding area pointed to by the :term:`D`
    variable. Packaging occurs later using files from this holding
    directory.
@@ -928,7 +928,7 @@ the analysis and package splitting process use several areas:
 -  :term:`PKGDATA_DIR`: A shared,
    global-state directory that holds packaging metadata generated during
    the packaging process. The packaging process copies metadata from
-   ``PKGDESTWORK`` to the ``PKGDATA_DIR`` area where it becomes globally
+   :term:`PKGDESTWORK` to the :term:`PKGDATA_DIR` area where it becomes globally
    available.
 
 -  :term:`STAGING_DIR_HOST`:
@@ -1008,7 +1008,7 @@ actually install:
 
 With :term:`IMAGE_ROOTFS`
 pointing to the location of the filesystem under construction and the
-``PACKAGE_INSTALL`` variable providing the final list of packages to
+:term:`PACKAGE_INSTALL` variable providing the final list of packages to
 install, the root file system is created.
 
 Package installation is under control of the package manager (e.g.
@@ -1057,7 +1057,7 @@ based on the image types specified in the
 The process turns everything into an image file or a set of image files
 and can compress the root filesystem image to reduce the overall size of
 the image. The formats used for the root filesystem depend on the
-``IMAGE_FSTYPES`` variable. Compression depends on whether the formats
+:term:`IMAGE_FSTYPES` variable. Compression depends on whether the formats
 support compression.
 
 As an example, a dynamically created task when creating a particular
@@ -1066,7 +1066,7 @@ image type would take the following form::
    do_image_type
 
 So, if the type
-as specified by the ``IMAGE_FSTYPES`` were ``ext4``, the dynamically
+as specified by the :term:`IMAGE_FSTYPES` were ``ext4``, the dynamically
 generated task would be as follows::
 
    do_image_ext4
@@ -1171,9 +1171,9 @@ the task is rerun.
    the sstate cache mechanism adds is a way to cache task output that
    can then be shared between build machines.
 
-Since ``STAMPS_DIR`` is usually a subdirectory of ``TMPDIR``, removing
-``TMPDIR`` will also remove ``STAMPS_DIR``, which means tasks will
-properly be rerun to repopulate ``TMPDIR``.
+Since :term:`STAMPS_DIR` is usually a subdirectory of :term:`TMPDIR`, removing
+:term:`TMPDIR` will also remove :term:`STAMPS_DIR`, which means tasks will
+properly be rerun to repopulate :term:`TMPDIR`.
 
 If you want some task to always be considered "out of date", you can
 mark it with the :ref:`nostamp <bitbake:bitbake-user-manual/bitbake-user-manual-metadata:variable flags>`
@@ -1408,7 +1408,7 @@ This next list, shows the variables associated with a standard SDK:
 
 -  :term:`TOOLCHAIN_HOST_TASK`:
    Lists packages that make up the host part of the SDK (i.e. the part
-   that runs on the ``SDKMACHINE``). When you use
+   that runs on the :term:`SDKMACHINE`). When you use
    ``bitbake -c populate_sdk imagename`` to create the SDK, a set of
    default packages apply. This variable allows you to add more
    packages.
@@ -1614,7 +1614,7 @@ them if they are deemed to be valid.
       :term:`PR` information as part of
       the shared state packages. Consequently, there are considerations that
       affect maintaining shared state feeds. For information on how the
-      build system works with packages and can track incrementing ``PR``
+      build system works with packages and can track incrementing :term:`PR`
       information, see the ":ref:`dev-manual/common-tasks:automatically incrementing a package version number`"
       section in the Yocto Project Development Tasks Manual.
 
@@ -1671,8 +1671,8 @@ objective of making native or cross packages relocatable.
    build host. However, cross packages generate output for the target
    architecture.
 
-The checksum therefore needs to exclude ``WORKDIR``. The simplistic
-approach for excluding the work directory is to set ``WORKDIR`` to some
+The checksum therefore needs to exclude :term:`WORKDIR`. The simplistic
+approach for excluding the work directory is to set :term:`WORKDIR` to some
 fixed value and create the checksum for the "run" script.
 
 Another problem results from the "run" scripts containing functions that
@@ -1690,7 +1690,7 @@ contains code that first figures out the variable and function
 dependencies, and then creates a checksum for the data used as the input
 to the task.
 
-Like the ``WORKDIR`` case, there can be situations where dependencies should be
+Like the :term:`WORKDIR` case, there can be situations where dependencies should be
 ignored. For these situations, you can instruct the build process to
 ignore a dependency by using a line like the following::
 
@@ -1707,7 +1707,7 @@ following::
    PACKAGE_ARCHS[vardeps] = "MACHINE"
 
 This example explicitly
-adds the ``MACHINE`` variable as a dependency for ``PACKAGE_ARCHS``.
+adds the :term:`MACHINE` variable as a dependency for :term:`PACKAGE_ARCHS`.
 
 As an example, consider a case with in-line Python where BitBake is not
 able to figure out dependencies. When running in debug mode (i.e. using
@@ -1761,7 +1761,7 @@ through this setting in the ``bitbake.conf`` file::
 
    BB_SIGNATURE_HANDLER ?= "OEBasicHash"
 
-The "OEBasicHash" ``BB_SIGNATURE_HANDLER`` is the same
+The "OEBasicHash" :term:`BB_SIGNATURE_HANDLER` is the same
 as the "OEBasic" version but adds the task hash to the :ref:`stamp
 files <overview-manual/concepts:stamp files and the rerunning of tasks>`. This
 results in any metadata change that changes the task hash, automatically causing
@@ -1782,7 +1782,7 @@ the build. This information includes:
 -  ``BBHASHDEPS_``\ filename\ ``:``\ taskname: The task dependencies for
    each task.
 
--  ``BB_TASKHASH``: The hash of the currently running task.
+-  :term:`BB_TASKHASH`: The hash of the currently running task.
 
 Shared State
 ------------
@@ -1851,7 +1851,7 @@ The following list explains the previous example:
       ``do_deploy`` is in the shared state cache and its signature indicates
       that the cached output is still valid (i.e. if no relevant task inputs
       have changed), then the contents of the shared state cache copies
-      directly to ${``DEPLOY_DIR_IMAGE``} by the ``do_deploy_setscene`` task
+      directly to ${:term:`DEPLOY_DIR_IMAGE`} by the ``do_deploy_setscene`` task
       instead, skipping the ``do_deploy`` task.
 
 -  The following task definition is glue logic needed to make the
@@ -1897,8 +1897,8 @@ The following list explains the previous example:
 
 -  ``sstate-inputdirs`` and ``sstate-outputdirs`` can also be used with
    multiple directories. For example, the following declares
-   ``PKGDESTWORK`` and ``SHLIBWORK`` as shared state input directories,
-   which populates the shared state cache, and ``PKGDATA_DIR`` and
+   :term:`PKGDESTWORK` and ``SHLIBWORK`` as shared state input directories,
+   which populates the shared state cache, and :term:`PKGDATA_DIR` and
    ``SHLIBSDIR`` as the corresponding shared state output directories::
 
       do_package[sstate-inputdirs] = "${PKGDESTWORK} ${SHLIBSWORKDIR}"
@@ -1925,7 +1925,7 @@ shared state files. Here is an example::
    subdirectories, where the subdirectory names are based on the first two
    characters of the hash.
    If the shared state directory structure for a mirror has the same structure
-   as ``SSTATE_DIR``, you must specify "PATH" as part of the URI to enable the build
+   as :term:`SSTATE_DIR`, you must specify "PATH" as part of the URI to enable the build
    system to map to the appropriate subdirectory.
 
 The shared state package validity can be detected just by looking at the
@@ -1976,7 +1976,7 @@ dependencies, you must manually declare the dependencies.
 
    Simultaneously, all executables and shared libraries installed by the
    recipe are inspected to see what shared libraries they link against.
-   For each shared library dependency that is found, ``PKGDATA_DIR`` is
+   For each shared library dependency that is found, :term:`PKGDATA_DIR` is
    queried to see if some package (likely from a different recipe)
    contains the shared library. If such a package is found, a runtime
    dependency is added from the package that depends on the shared
@@ -1985,7 +1985,7 @@ dependencies, you must manually declare the dependencies.
    The automatically added runtime dependency also includes a version
    restriction. This version restriction specifies that at least the
    current version of the package that provides the shared library must
-   be used, as if "package (>= version)" had been added to ``RDEPENDS``.
+   be used, as if "package (>= version)" had been added to :term:`RDEPENDS`.
    This forces an upgrade of the package containing the shared library
    when installing the package that depends on the library, if needed.
 
@@ -1999,14 +1999,14 @@ dependencies, you must manually declare the dependencies.
    pkg-config modules (``*.pc`` files) installed by the recipe are
    located. For each module, the package that contains the module is
    registered as providing the module. The resulting module-to-package
-   mapping is saved globally in ``PKGDATA_DIR`` by the
+   mapping is saved globally in :term:`PKGDATA_DIR` by the
    ``do_packagedata`` task.
 
    Simultaneously, all pkg-config modules installed by the recipe are
    inspected to see what other pkg-config modules they depend on. A
    module is seen as depending on another module if it contains a
    "Requires:" line that specifies the other module. For each module
-   dependency, ``PKGDATA_DIR`` is queried to see if some package
+   dependency, :term:`PKGDATA_DIR` is queried to see if some package
    contains the module. If such a package is found, a runtime dependency
    is added from the package that depends on the module to the package
    that contains the module.
@@ -2046,7 +2046,7 @@ recipe in :term:`DEPENDS` through use
 of a ``[``\ :ref:`deptask <bitbake:bitbake-user-manual/bitbake-user-manual-metadata:variable flags>`\ ``]``
 declaration, which guarantees that the required
 shared-library/module-to-package mapping information will be available
-when needed as long as ``DEPENDS`` has been correctly set.
+when needed as long as :term:`DEPENDS` has been correctly set.
 
 Fakeroot and Pseudo
 ===================