3 files changed, 60 insertions, 7262 deletions

diff --git a/meta/packages/jpeg/jpeg-6b/debian.patch b/meta/packages/jpeg/jpeg-6b/debian.patch
index 823c8e08dc..d6ae090d47 100644
--- a/meta/packages/jpeg/jpeg-6b/debian.patch
+++ b/meta/packages/jpeg/jpeg-6b/debian.patch
@@ -41,16 +41,6 @@
  
  # Initialize some other variables.
  subdirs=
-@@ -1559,7 +1559,8 @@
-   if test "x$LTSTATIC" = xno; then
-     disable_static="--disable-static"
-   fi
--  $srcdir/ltconfig $disable_shared $disable_static $srcdir/ltmain.sh
-+  chmod a+x $srcdir/ltconfig.new
-+  $srcdir/ltconfig.new $disable_shared $disable_static $srcdir/ltmain.new.sh $host
- fi
- 
- # Select memory manager depending on user input.
 --- jpeg-6b/makefile.cfg~libjpeg6bb-5
 +++ jpeg-6b/makefile.cfg
 @@ -17,7 +17,7 @@
@@ -1886,4237 +1876,6 @@
  #endif /* TRANSFORMS_SUPPORTED */
  
  
---- jpeg-6b/config.guess~libjpeg6bb-5
-+++ jpeg-6b/config.guess
-@@ -1,4 +1,10 @@
- #! /bin/sh
-+# autotools-dev hack (<ballombe@debian.org>, Wed, 14 Nov 2001 10:13:10 +0100)
-+if [ -x /usr/share/misc/config.guess ]; then
-+   /usr/share/misc/config.guess $*
-+   exit $?
-+fi
-+
- # Attempt to guess a canonical system name.
- #   Copyright (C) 1992, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
- #
---- jpeg-6b/config.sub~libjpeg6bb-5
-+++ jpeg-6b/config.sub
-@@ -1,4 +1,10 @@
- #! /bin/sh
-+# autotools-dev hack (<ballombe@debian.org>, Wed, 14 Nov 2001 10:13:10 +0100)
-+if [ -x /usr/share/misc/config.sub ]; then
-+   /usr/share/misc/config.sub $*
-+   exit $?
-+fi
-+
- # Configuration validation subroutine script, version 1.1.
- #   Copyright (C) 1991, 92, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
- # This file is (in principle) common to ALL GNU software.
---- /dev/null
-+++ jpeg-6b/libtool.cfg
-@@ -0,0 +1,224 @@
-+# libtool.cfg - Libtool configuration file.
-+# Generated automatically by ltconfig (GNU libtool 1.3.3 (1.385.2.181 1999/07/02 15:49:11))
-+# Libtool was configured as follows, on host yellowpig:
-+#
-+# CC="old_CC" CFLAGS="old_CFLAGS" CPPFLAGS="old_CPPFLAGS" \
-+# LD="old_LD" LDFLAGS="old_LDFLAGS" LIBS="old_LIBS" \
-+# NM="old_NM" RANLIB="old_RANLIB" LN_S="old_LN_S" \
-+# DLLTOOL="old_DLLTOOL" OBJDUMP="old_OBJDUMP" AS="old_AS" \
-+#   ./ltconfig.new ./ltmain.sh.new i386-gnu
-+#
-+# Compiler and other test output produced by ltconfig.new, useful for
-+# debugging ltconfig.new, is in ./config.log if it exists.
-+
-+# The version of ltconfig.new that generated this script.
-+LTCONFIG_VERSION=1.3.3
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=/bin/sh
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=yes
-+
-+# Whether or not to build static libraries.
-+build_old_libs=yes
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=yes
-+
-+# The host system.
-+host_alias=i386-gnu
-+host=i386-pc-gnu
-+
-+# An echo program that does not interpret backslashes.
-+echo=echo
-+
-+# The archiver.
-+AR=ar
-+
-+# The default C compiler.
-+CC=gcc
-+
-+# The linker used to build libraries.
-+LD=/usr/bin/ld
-+
-+# Whether we need hard or soft links.
-+LN_S=ln -s
-+
-+# A BSD-compatible nm program.
-+NM=/usr/bin/nm -B
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="dlltool"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="objdump"
-+
-+# Used on cygwin: assembler.
-+AS="as"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=.libs
-+
-+# How to create reloadable object files.
-+reload_flag= -r
-+reload_cmds=$LD$reload_flag -o $output$reload_objs
-+
-+# How to pass a linker flag through the compiler.
-+wl=-Wl,
-+
-+# Object file suffix (normally "o").
-+objext="o"
-+
-+# Old archive suffix (normally "a").
-+libext="a"
-+
-+# Executable file suffix (normally "").
-+exeext=""
-+
-+# Additional compiler flags for building library objects.
-+pic_flag= -fPIC
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=yes
-+
-+# Can we write directly to a .lo ?
-+compiler_o_lo=yes
-+
-+# Must we lock files when doing compilation ?
-+need_locks=no
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=no
-+
-+# Do we need a version for libraries?
-+need_version=no
-+
-+# Whether dlopen is supported.
-+dlopen=unknown
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=unknown
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=unknown
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=-static
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag= -fno-builtin -fno-rtti -fno-exceptions
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=${wl}--export-dynamic
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=${wl}--whole-archive$convenience ${wl}--no-whole-archive
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=
-+
-+# Library versioning type.
-+version_type=linux
-+
-+# Format of library name prefix.
-+libname_spec=lib$name
-+
-+# List of archive names.  First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=${libname}${release}.so$major
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=ranlib
-+old_archive_cmds=$AR cru $oldlib$oldobjs~$RANLIB $oldlib
-+old_postinstall_cmds=$RANLIB $oldlib~chmod 644 $oldlib
-+old_postuninstall_cmds=
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib
-+archive_expsym_cmds=$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib
-+postinstall_cmds=
-+postuninstall_cmds=
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=unknown
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=sed -n -e 's/^.*[   ]\([ABCDGISTW]\)[       ][      ]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p'
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'
-+
-+# This is the shared library runtime path variable.
-+runpath_var=LD_RUN_PATH
-+
-+# This is the shared library path variable.
-+shlibpath_var=LD_LIBRARY_PATH
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=unknown
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=immediate
-+
-+# Flag to hardcode $libdir into a binary during linking.
-+# This must work even if $libdir does not exist.
-+hardcode_libdir_flag_spec=${wl}--rpath ${wl}$libdir
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=
-+
-+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=no
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=no
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=unsupported
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=/lib /usr/lib /usr/local/lib
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=/lib /usr/lib
-+
-+# Fix the shell variable $srcfile for the compiler.
-+fix_srcfile_path=""
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=no
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$NM $libobjs $convenience | $global_symbol_pipe | sed 's/.* //' | sort | uniq > $export_symbols
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=_GLOBAL_OFFSET_TABLE_
-+
-+# Symbols that must always be exported.
-+include_expsyms=
-+
---- /dev/null
-+++ jpeg-6b/ltmain.new.sh
-@@ -0,0 +1,3975 @@
-+# ltmain.sh - Provide generalized library-building support services.
-+# NOTE: Changing this file will not affect anything until you rerun ltconfig.
-+#
-+# Copyright (C) 1996-1999 Free Software Foundation, Inc.
-+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-+#
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2 of the License, or
-+# (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful, but
-+# WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+# General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+#
-+# As a special exception to the GNU General Public License, if you
-+# distribute this file as part of a program that contains a
-+# configuration script generated by Autoconf, you may include it under
-+# the same distribution terms that you use for the rest of that program.
-+
-+# Check that we have a working $echo.
-+if test "X$1" = X--no-reexec; then
-+  # Discard the --no-reexec flag, and continue.
-+  shift
-+elif test "X$1" = X--fallback-echo; then
-+  # Avoid inline document here, it may be left over
-+  :
-+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-+  # Yippee, $echo works!
-+  :
-+else
-+  # Restart under the correct shell, and then maybe $echo will work.
-+  exec $SHELL "$0" --no-reexec ${1+"$@"}
-+fi
-+
-+if test "X$1" = X--fallback-echo; then
-+  # used as fallback echo
-+  shift
-+  cat <<EOF
-+$*
-+EOF
-+  exit 0
-+fi
-+
-+# The name of this program.
-+progname=`$echo "$0" | sed 's%^.*/%%'`
-+modename="$progname"
-+
-+# Constants.
-+PROGRAM=ltmain.sh
-+PACKAGE=libtool
-+VERSION=1.3.3
-+TIMESTAMP=" (1.385.2.181 1999/07/02 15:49:11)"
-+
-+default_mode=
-+help="Try \`$progname --help' for more information."
-+magic="%%%MAGIC variable%%%"
-+mkdir="mkdir"
-+mv="mv -f"
-+rm="rm -f"
-+
-+# Sed substitution that helps us do robust quoting.  It backslashifies
-+# metacharacters that are still active within double-quoted strings.
-+Xsed='sed -e 1s/^X//'
-+sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-+SP2NL='tr \040 \012'
-+NL2SP='tr \015\012 \040\040'
-+
-+# NLS nuisances.
-+# Only set LANG and LC_ALL to C if already set.
-+# These must not be set unconditionally because not all systems understand
-+# e.g. LANG=C (notably SCO).
-+# We save the old values to restore during execute mode.
-+if test "${LC_ALL+set}" = set; then
-+  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-+fi
-+if test "${LANG+set}" = set; then
-+  save_LANG="$LANG"; LANG=C; export LANG
-+fi
-+
-+if test "$LTCONFIG_VERSION" != "$VERSION"; then
-+  echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2
-+  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-+  exit 1
-+fi
-+
-+if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-+  echo "$modename: not configured to build any kind of library" 1>&2
-+  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-+  exit 1
-+fi
-+
-+# Global variables.
-+mode=$default_mode
-+nonopt=
-+prev=
-+prevopt=
-+run=
-+show="$echo"
-+show_help=
-+execute_dlfiles=
-+lo2o="s/\\.lo\$/.${objext}/"
-+o2lo="s/\\.${objext}\$/.lo/"
-+
-+# Parse our command line options once, thoroughly.
-+while test $# -gt 0
-+do
-+  arg="$1"
-+  shift
-+
-+  case "$arg" in
-+  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
-+  *) optarg= ;;
-+  esac
-+
-+  # If the previous option needs an argument, assign it.
-+  if test -n "$prev"; then
-+    case "$prev" in
-+    execute_dlfiles)
-+      eval "$prev=\"\$$prev \$arg\""
-+      ;;
-+    *)
-+      eval "$prev=\$arg"
-+      ;;
-+    esac
-+
-+    prev=
-+    prevopt=
-+    continue
-+  fi
-+
-+  # Have we seen a non-optional argument yet?
-+  case "$arg" in
-+  --help)
-+    show_help=yes
-+    ;;
-+
-+  --version)
-+    echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
-+    exit 0
-+    ;;
-+
-+  --config)
-+    sed -e '1,/^### BEGIN LIBTOOL CONFIG/d' -e '/^### END LIBTOOL CONFIG/,$d' $0
-+    exit 0
-+    ;;
-+
-+  --debug)
-+    echo "$progname: enabling shell trace mode"
-+    set -x
-+    ;;
-+
-+  --dry-run | -n)
-+    run=:
-+    ;;
-+
-+  --features)
-+    echo "host: $host"
-+    if test "$build_libtool_libs" = yes; then
-+      echo "enable shared libraries"
-+    else
-+      echo "disable shared libraries"
-+    fi
-+    if test "$build_old_libs" = yes; then
-+      echo "enable static libraries"
-+    else
-+      echo "disable static libraries"
-+    fi
-+    exit 0
-+    ;;
-+
-+  --finish) mode="finish" ;;
-+
-+  --mode) prevopt="--mode" prev=mode ;;
-+  --mode=*) mode="$optarg" ;;
-+
-+  --quiet | --silent)
-+    show=:
-+    ;;
-+
-+  -dlopen)
-+    prevopt="-dlopen"
-+    prev=execute_dlfiles
-+    ;;
-+
-+  -*)
-+    $echo "$modename: unrecognized option \`$arg'" 1>&2
-+    $echo "$help" 1>&2
-+    exit 1
-+    ;;
-+
-+  *)
-+    nonopt="$arg"
-+    break
-+    ;;
-+  esac
-+done
-+
-+if test -n "$prevopt"; then
-+  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
-+  $echo "$help" 1>&2
-+  exit 1
-+fi
-+
-+if test -z "$show_help"; then
-+
-+  # Infer the operation mode.
-+  if test -z "$mode"; then
-+    case "$nonopt" in
-+    *cc | *++ | gcc* | *-gcc*)
-+      mode=link
-+      for arg
-+      do
-+       case "$arg" in
-+       -c)
-+          mode=compile
-+          break
-+          ;;
-+       esac
-+      done
-+      ;;
-+    *db | *dbx | *strace | *truss)
-+      mode=execute
-+      ;;
-+    *install*|cp|mv)
-+      mode=install
-+      ;;
-+    *rm)
-+      mode=uninstall
-+      ;;
-+    *)
-+      # If we have no mode, but dlfiles were specified, then do execute mode.
-+      test -n "$execute_dlfiles" && mode=execute
-+
-+      # Just use the default operation mode.
-+      if test -z "$mode"; then
-+       if test -n "$nonopt"; then
-+         $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
-+       else
-+         $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
-+       fi
-+      fi
-+      ;;
-+    esac
-+  fi
-+
-+  # Only execute mode is allowed to have -dlopen flags.
-+  if test -n "$execute_dlfiles" && test "$mode" != execute; then
-+    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
-+    $echo "$help" 1>&2
-+    exit 1
-+  fi
-+
-+  # Change the help message to a mode-specific one.
-+  generic_help="$help"
-+  help="Try \`$modename --help --mode=$mode' for more information."
-+
-+  # These modes are in order of execution frequency so that they run quickly.
-+  case "$mode" in
-+  # libtool compile mode
-+  compile)
-+    modename="$modename: compile"
-+    # Get the compilation command and the source file.
-+    base_compile=
-+    lastarg=
-+    srcfile="$nonopt"
-+    suppress_output=
-+
-+    user_target=no
-+    for arg
-+    do
-+      # Accept any command-line options.
-+      case "$arg" in
-+      -o)
-+       if test "$user_target" != "no"; then
-+         $echo "$modename: you cannot specify \`-o' more than once" 1>&2
-+         exit 1
-+       fi
-+       user_target=next
-+       ;;
-+
-+      -static)
-+       build_old_libs=yes
-+       continue
-+       ;;
-+      esac
-+
-+      case "$user_target" in
-+      next)
-+       # The next one is the -o target name
-+       user_target=yes
-+       continue
-+       ;;
-+      yes)
-+       # We got the output file
-+       user_target=set
-+       libobj="$arg"
-+       continue
-+       ;;
-+      esac
-+
-+      # Accept the current argument as the source file.
-+      lastarg="$srcfile"
-+      srcfile="$arg"
-+
-+      # Aesthetically quote the previous argument.
-+
-+      # Backslashify any backslashes, double quotes, and dollar signs.
-+      # These are the only characters that are still specially
-+      # interpreted inside of double-quoted scrings.
-+      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-+
-+      # Double-quote args containing other shell metacharacters.
-+      # Many Bourne shells cannot handle close brackets correctly in scan
-+      # sets, so we specify it separately.
-+      case "$lastarg" in
-+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \    ]*|*]*)
-+       lastarg="\"$lastarg\""
-+       ;;
-+      esac
-+
-+      # Add the previous argument to base_compile.
-+      if test -z "$base_compile"; then
-+       base_compile="$lastarg"
-+      else
-+       base_compile="$base_compile $lastarg"
-+      fi
-+    done
-+
-+    case "$user_target" in
-+    set)
-+      ;;
-+    no)
-+      # Get the name of the library object.
-+      libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
-+      ;;
-+    *)
-+      $echo "$modename: you must specify a target with \`-o'" 1>&2
-+      exit 1
-+      ;;
-+    esac
-+
-+    # Recognize several different file suffixes.
-+    # If the user specifies -o file.o, it is replaced with file.lo
-+    xform='[cCFSfmso]'
-+    case "$libobj" in
-+    *.ada) xform=ada ;;
-+    *.adb) xform=adb ;;
-+    *.ads) xform=ads ;;
-+    *.asm) xform=asm ;;
-+    *.c++) xform=c++ ;;
-+    *.cc) xform=cc ;;
-+    *.cpp) xform=cpp ;;
-+    *.cxx) xform=cxx ;;
-+    *.f90) xform=f90 ;;
-+    *.for) xform=for ;;
-+    esac
-+
-+    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-+
-+    case "$libobj" in
-+    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
-+    *)
-+      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
-+      exit 1
-+      ;;
-+    esac
-+
-+    if test -z "$base_compile"; then
-+      $echo "$modename: you must specify a compilation command" 1>&2
-+      $echo "$help" 1>&2
-+      exit 1
-+    fi
-+
-+    # Delete any leftover library objects.
-+    if test "$build_old_libs" = yes; then
-+      removelist="$obj $libobj"
-+    else
-+      removelist="$libobj"
-+    fi
-+
-+    $run $rm $removelist
-+    trap "$run $rm $removelist; exit 1" 1 2 15
-+
-+    # Calculate the filename of the output object if compiler does
-+    # not support -o with -c
-+    if test "$compiler_c_o" = no; then
-+      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\..*$%%'`.${objext}
-+      lockfile="$output_obj.lock"
-+      removelist="$removelist $output_obj $lockfile"
-+      trap "$run $rm $removelist; exit 1" 1 2 15
-+    else
-+      need_locks=no
-+      lockfile=
-+    fi
-+
-+    # Lock this critical section if it is needed
-+    # We use this script file to make the link, it avoids creating a new file
-+    if test "$need_locks" = yes; then
-+      until ln "$0" "$lockfile" 2>/dev/null; do
-+       $show "Waiting for $lockfile to be removed"
-+       sleep 2
-+      done
-+    elif test "$need_locks" = warn; then
-+      if test -f "$lockfile"; then
-+       echo "\
-+*** ERROR, $lockfile exists and contains:
-+`cat $lockfile 2>/dev/null`
-+
-+This indicates that another process is trying to use the same
-+temporary object file, and libtool could not work around it because
-+your compiler does not support \`-c' and \`-o' together.  If you
-+repeat this compilation, it may succeed, by chance, but you had better
-+avoid parallel builds (make -j) in this platform, or get a better
-+compiler."
-+
-+       $run $rm $removelist
-+       exit 1
-+      fi
-+      echo $srcfile > "$lockfile"
-+    fi
-+
-+    if test -n "$fix_srcfile_path"; then
-+      eval srcfile=\"$fix_srcfile_path\"
-+    fi
-+
-+    # Only build a PIC object if we are building libtool libraries.
-+    if test "$build_libtool_libs" = yes; then
-+      # Without this assignment, base_compile gets emptied.
-+      fbsd_hideous_sh_bug=$base_compile
-+
-+      # All platforms use -DPIC, to notify preprocessed assembler code.
-+      command="$base_compile $pic_flag -DPIC $srcfile"
-+      if test "$build_old_libs" = yes; then
-+       lo_libobj="$libobj"
-+       dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
-+       if test "X$dir" = "X$libobj"; then
-+         dir="$objdir"
-+       else
-+         dir="$dir/$objdir"
-+       fi
-+       libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
-+
-+       if test -d "$dir"; then
-+         $show "$rm $libobj"
-+         $run $rm $libobj
-+       else
-+         $show "$mkdir $dir"
-+         $run $mkdir $dir
-+         status=$?
-+         if test $status -ne 0 && test ! -d $dir; then
-+           exit $status
-+         fi
-+       fi
-+      fi
-+      if test "$compiler_o_lo" = yes; then
-+       output_obj="$libobj"
-+       command="$command -o $output_obj"
-+      elif test "$compiler_c_o" = yes; then
-+       output_obj="$obj"
-+       command="$command -o $output_obj"
-+      fi
-+
-+      $run $rm "$output_obj"
-+      $show "$command"
-+      if $run eval "$command"; then :
-+      else
-+       test -n "$output_obj" && $run $rm $removelist
-+       exit 1
-+      fi
-+
-+      if test "$need_locks" = warn &&
-+        test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
-+       echo "\
-+*** ERROR, $lockfile contains:
-+`cat $lockfile 2>/dev/null`
-+
-+but it should contain:
-+$srcfile
-+
-+This indicates that another process is trying to use the same
-+temporary object file, and libtool could not work around it because
-+your compiler does not support \`-c' and \`-o' together.  If you
-+repeat this compilation, it may succeed, by chance, but you had better
-+avoid parallel builds (make -j) in this platform, or get a better
-+compiler."
-+
-+       $run $rm $removelist
-+       exit 1
-+      fi
-+
-+      # Just move the object if needed, then go on to compile the next one
-+      if test x"$output_obj" != x"$libobj"; then
-+       $show "$mv $output_obj $libobj"
-+       if $run $mv $output_obj $libobj; then :
-+       else
-+         error=$?
-+         $run $rm $removelist
-+         exit $error
-+       fi
-+      fi
-+
-+      # If we have no pic_flag, then copy the object into place and finish.
-+      if test -z "$pic_flag" && test "$build_old_libs" = yes; then
-+       # Rename the .lo from within objdir to obj
-+       if test -f $obj; then
-+         $show $rm $obj
-+         $run $rm $obj
-+       fi
-+
-+       $show "$mv $libobj $obj"
-+       if $run $mv $libobj $obj; then :
-+       else
-+         error=$?
-+         $run $rm $removelist
-+         exit $error
-+       fi
-+
-+       # Now arrange that obj and lo_libobj become the same file
-+       $show "$LN_S $obj $lo_libobj"
-+       if $run $LN_S $obj $lo_libobj; then
-+         exit 0
-+       else
-+         error=$?
-+         $run $rm $removelist
-+         exit $error
-+       fi
-+      fi
-+
-+      # Allow error messages only from the first compilation.
-+      suppress_output=' >/dev/null 2>&1'
-+    fi
-+
-+    # Only build a position-dependent object if we build old libraries.
-+    if test "$build_old_libs" = yes; then
-+      command="$base_compile $srcfile"
-+      if test "$compiler_c_o" = yes; then
-+       command="$command -o $obj"
-+       output_obj="$obj"
-+      fi
-+
-+      # Suppress compiler output if we already did a PIC compilation.
-+      command="$command$suppress_output"
-+      $run $rm "$output_obj"
-+      $show "$command"
-+      if $run eval "$command"; then :
-+      else
-+       $run $rm $removelist
-+       exit 1
-+      fi
-+
-+      if test "$need_locks" = warn &&
-+        test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
-+       echo "\
-+*** ERROR, $lockfile contains:
-+`cat $lockfile 2>/dev/null`
-+
-+but it should contain:
-+$srcfile
-+
-+This indicates that another process is trying to use the same
-+temporary object file, and libtool could not work around it because
-+your compiler does not support \`-c' and \`-o' together.  If you
-+repeat this compilation, it may succeed, by chance, but you had better
-+avoid parallel builds (make -j) in this platform, or get a better
-+compiler."
-+
-+       $run $rm $removelist
-+       exit 1
-+      fi
-+
-+      # Just move the object if needed
-+      if test x"$output_obj" != x"$obj"; then
-+       $show "$mv $output_obj $obj"
-+       if $run $mv $output_obj $obj; then :
-+       else
-+         error=$?
-+         $run $rm $removelist
-+         exit $error
-+       fi
-+      fi
-+
-+      # Create an invalid libtool object if no PIC, so that we do not
-+      # accidentally link it into a program.
-+      if test "$build_libtool_libs" != yes; then
-+       $show "echo timestamp > $libobj"
-+       $run eval "echo timestamp > \$libobj" || exit $?
-+      else
-+       # Move the .lo from within objdir
-+       $show "$mv $libobj $lo_libobj"
-+       if $run $mv $libobj $lo_libobj; then :
-+       else
-+         error=$?
-+         $run $rm $removelist
-+         exit $error
-+       fi
-+      fi
-+    fi
-+
-+    # Unlock the critical section if it was locked
-+    if test "$need_locks" != no; then
-+      $rm "$lockfile"
-+    fi
-+
-+    exit 0
-+    ;;
-+
-+  # libtool link mode
-+  link)
-+    modename="$modename: link"
-+    C_compiler="$CC" # save it, to compile generated C sources
-+    CC="$nonopt"
-+    case "$host" in
-+    *-*-cygwin* | *-*-mingw* | *-*-os2*)
-+      # It is impossible to link a dll without this setting, and
-+      # we shouldn't force the makefile maintainer to figure out
-+      # which system we are compiling for in order to pass an extra
-+      # flag for every libtool invokation.
-+      # allow_undefined=no
-+
-+      # FIXME: Unfortunately, there are problems with the above when trying
-+      # to make a dll which has undefined symbols, in which case not
-+      # even a static library is built.  For now, we need to specify
-+      # -no-undefined on the libtool link line when we can be certain
-+      # that all symbols are satisfied, otherwise we get a static library.
-+      allow_undefined=yes
-+
-+      # This is a source program that is used to create dlls on Windows
-+      # Don't remove nor modify the starting and closing comments
-+# /* ltdll.c starts here */
-+# #define WIN32_LEAN_AND_MEAN
-+# #include <windows.h>
-+# #undef WIN32_LEAN_AND_MEAN
-+# #include <stdio.h>
-+#
-+# #ifndef __CYGWIN__
-+# #  ifdef __CYGWIN32__
-+# #    define __CYGWIN__ __CYGWIN32__
-+# #  endif
-+# #endif
-+#
-+# #ifdef __cplusplus
-+# extern "C" {
-+# #endif
-+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-+# #ifdef __cplusplus
-+# }
-+# #endif
-+#
-+# #ifdef __CYGWIN__
-+# #include <cygwin/cygwin_dll.h>
-+# DECLARE_CYGWIN_DLL( DllMain );
-+# #endif
-+# HINSTANCE __hDllInstance_base;
-+#
-+# BOOL APIENTRY
-+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-+# {
-+#   __hDllInstance_base = hInst;
-+#   return TRUE;
-+# }
-+# /* ltdll.c ends here */
-+      # This is a source program that is used to create import libraries
-+      # on Windows for dlls which lack them. Don't remove nor modify the
-+      # starting and closing comments
-+# /* impgen.c starts here */
-+# /*   Copyright (C) 1999 Free Software Foundation, Inc.
-+# 
-+#  This file is part of GNU libtool.
-+# 
-+#  This program is free software; you can redistribute it and/or modify
-+#  it under the terms of the GNU General Public License as published by
-+#  the Free Software Foundation; either version 2 of the License, or
-+#  (at your option) any later version.
-+# 
-+#  This program is distributed in the hope that it will be useful,
-+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+#  GNU General Public License for more details.
-+# 
-+#  You should have received a copy of the GNU General Public License
-+#  along with this program; if not, write to the Free Software
-+#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+#  */
-+# 
-+#  #include <stdio.h>          /* for printf() */
-+#  #include <unistd.h>         /* for open(), lseek(), read() */
-+#  #include <fcntl.h>          /* for O_RDONLY, O_BINARY */
-+#  #include <string.h>         /* for strdup() */
-+# 
-+#  static unsigned int
-+#  pe_get16 (fd, offset)
-+#       int fd;
-+#       int offset;
-+#  {
-+#    unsigned char b[2];
-+#    lseek (fd, offset, SEEK_SET);
-+#    read (fd, b, 2);
-+#    return b[0] + (b[1]<<8);
-+#  }
-+# 
-+#  static unsigned int
-+#  pe_get32 (fd, offset)
-+#      int fd;
-+#      int offset;
-+#  {
-+#    unsigned char b[4];
-+#    lseek (fd, offset, SEEK_SET);
-+#    read (fd, b, 4);
-+#    return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-+#  }
-+# 
-+#  static unsigned int
-+#  pe_as32 (ptr)
-+#       void *ptr;
-+#  {
-+#    unsigned char *b = ptr;
-+#    return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-+#  }
-+# 
-+#  int
-+#  main (argc, argv)
-+#      int argc;
-+#      char *argv[];
-+#  {
-+#      int dll;
-+#      unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
-+#      unsigned long export_rva, export_size, nsections, secptr, expptr;
-+#      unsigned long name_rvas, nexp;
-+#      unsigned char *expdata, *erva;
-+#      char *filename, *dll_name;
-+# 
-+#      filename = argv[1];
-+# 
-+#      dll = open(filename, O_RDONLY|O_BINARY);
-+#      if (!dll)
-+#      return 1;
-+# 
-+#      dll_name = filename;
-+#    
-+#      for (i=0; filename[i]; i++)
-+#      if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
-+#          dll_name = filename + i +1;
-+# 
-+#      pe_header_offset = pe_get32 (dll, 0x3c);
-+#      opthdr_ofs = pe_header_offset + 4 + 20;
-+#      num_entries = pe_get32 (dll, opthdr_ofs + 92);
-+# 
-+#      if (num_entries < 1) /* no exports */
-+#      return 1;
-+# 
-+#      export_rva = pe_get32 (dll, opthdr_ofs + 96);
-+#      export_size = pe_get32 (dll, opthdr_ofs + 100);
-+#      nsections = pe_get16 (dll, pe_header_offset + 4 +2);
-+#      secptr = (pe_header_offset + 4 + 20 +
-+#            pe_get16 (dll, pe_header_offset + 4 + 16));
-+# 
-+#      expptr = 0;
-+#      for (i = 0; i < nsections; i++)
-+#      {
-+#      char sname[8];
-+#      unsigned long secptr1 = secptr + 40 * i;
-+#      unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
-+#      unsigned long vsize = pe_get32 (dll, secptr1 + 16);
-+#      unsigned long fptr = pe_get32 (dll, secptr1 + 20);
-+#      lseek(dll, secptr1, SEEK_SET);
-+#      read(dll, sname, 8);
-+#      if (vaddr <= export_rva && vaddr+vsize > export_rva)
-+#      {
-+#          expptr = fptr + (export_rva - vaddr);
-+#          if (export_rva + export_size > vaddr + vsize)
-+#              export_size = vsize - (export_rva - vaddr);
-+#          break;
-+#      }
-+#      }
-+# 
-+#      expdata = (unsigned char*)malloc(export_size);
-+#      lseek (dll, expptr, SEEK_SET);
-+#      read (dll, expdata, export_size);
-+#      erva = expdata - export_rva;
-+# 
-+#      nexp = pe_as32 (expdata+24);
-+#      name_rvas = pe_as32 (expdata+32);
-+# 
-+#      printf ("EXPORTS\n");
-+#      for (i = 0; i<nexp; i++)
-+#      {
-+#      unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
-+#      printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
-+#      }
-+# 
-+#      return 0;
-+#  }
-+# /* impgen.c ends here */
-+      ;;
-+    *)
-+      allow_undefined=yes
-+      ;;
-+    esac
-+    compile_command="$CC"
-+    finalize_command="$CC"
-+
-+    compile_rpath=
-+    finalize_rpath=
-+    compile_shlibpath=
-+    finalize_shlibpath=
-+    convenience=
-+    old_convenience=
-+    deplibs=
-+    linkopts=
-+
-+    if test -n "$shlibpath_var"; then
-+      # get the directories listed in $shlibpath_var
-+      eval lib_search_path=\`\$echo \"X \${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
-+    else
-+      lib_search_path=
-+    fi
-+    # now prepend the system-specific ones
-+    eval lib_search_path=\"$sys_lib_search_path_spec\$lib_search_path\"
-+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-+    
-+    avoid_version=no
-+    dlfiles=
-+    dlprefiles=
-+    dlself=no
-+    export_dynamic=no
-+    export_symbols=
-+    export_symbols_regex=
-+    generated=
-+    libobjs=
-+    link_against_libtool_libs=
-+    ltlibs=
-+    module=no
-+    objs=
-+    prefer_static_libs=no
-+    preload=no
-+    prev=
-+    prevarg=
-+    release=
-+    rpath=
-+    xrpath=
-+    perm_rpath=
-+    temp_rpath=
-+    thread_safe=no
-+    vinfo=
-+
-+    # We need to know -static, to get the right output filenames.
-+    for arg
-+    do
-+      case "$arg" in
-+      -all-static | -static)
-+       if test "X$arg" = "X-all-static"; then
-+         if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
-+           $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
-+         fi
-+         if test -n "$link_static_flag"; then
-+           dlopen_self=$dlopen_self_static
-+         fi
-+       else
-+         if test -z "$pic_flag" && test -n "$link_static_flag"; then
-+           dlopen_self=$dlopen_self_static
-+         fi
-+       fi
-+       build_libtool_libs=no
-+       build_old_libs=yes
-+       prefer_static_libs=yes
-+       break
-+       ;;
-+      esac
-+    done
-+
-+    # See if our shared archives depend on static archives.
-+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-+
-+    # Go through the arguments, transforming them on the way.
-+    while test $# -gt 0; do
-+      arg="$1"
-+      shift
-+
-+      # If the previous option needs an argument, assign it.
-+      if test -n "$prev"; then
-+       case "$prev" in
-+       output)
-+         compile_command="$compile_command @OUTPUT@"
-+         finalize_command="$finalize_command @OUTPUT@"
-+         ;;
-+       esac
-+
-+       case "$prev" in
-+       dlfiles|dlprefiles)
-+         if test "$preload" = no; then
-+           # Add the symbol object into the linking commands.
-+           compile_command="$compile_command @SYMFILE@"
-+           finalize_command="$finalize_command @SYMFILE@"
-+           preload=yes
-+         fi
-+         case "$arg" in
-+         *.la | *.lo) ;;  # We handle these cases below.
-+         force)
-+           if test "$dlself" = no; then
-+             dlself=needless
-+             export_dynamic=yes
-+           fi
-+           prev=
-+           continue
-+           ;;
-+         self)
-+           if test "$prev" = dlprefiles; then
-+             dlself=yes
-+           elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
-+             dlself=yes
-+           else
-+             dlself=needless
-+             export_dynamic=yes
-+           fi
-+           prev=
-+           continue
-+           ;;
-+         *)
-+           if test "$prev" = dlfiles; then
-+             dlfiles="$dlfiles $arg"
-+           else
-+             dlprefiles="$dlprefiles $arg"
-+           fi
-+           prev=
-+           ;;
-+         esac
-+         ;;
-+       expsyms)
-+         export_symbols="$arg"
-+         if test ! -f "$arg"; then
-+           $echo "$modename: symbol file \`$arg' does not exist"
-+           exit 1
-+         fi
-+         prev=
-+         continue
-+         ;;
-+       expsyms_regex)
-+         export_symbols_regex="$arg"
-+         prev=
-+         continue
-+         ;;
-+       release)
-+         release="-$arg"
-+         prev=
-+         continue
-+         ;;
-+       rpath | xrpath)
-+         # We need an absolute path.
-+         case "$arg" in
-+         [\\/]* | [A-Za-z]:[\\/]*) ;;
-+         *)
-+           $echo "$modename: only absolute run-paths are allowed" 1>&2
-+           exit 1
-+           ;;
-+         esac
-+         if test "$prev" = rpath; then
-+           case "$rpath " in
-+           *" $arg "*) ;;
-+           *) rpath="$rpath $arg" ;;
-+           esac
-+         else
-+           case "$xrpath " in
-+           *" $arg "*) ;;
-+           *) xrpath="$xrpath $arg" ;;
-+           esac
-+         fi
-+         prev=
-+         continue
-+         ;;
-+       *)
-+         eval "$prev=\"\$arg\""
-+         prev=
-+         continue
-+         ;;
-+       esac
-+      fi
-+
-+      prevarg="$arg"
-+
-+      case "$arg" in
-+      -all-static)
-+       if test -n "$link_static_flag"; then
-+         compile_command="$compile_command $link_static_flag"
-+         finalize_command="$finalize_command $link_static_flag"
-+       fi
-+       continue
-+       ;;
-+
-+      -allow-undefined)
-+       # FIXME: remove this flag sometime in the future.
-+       $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
-+       continue
-+       ;;
-+
-+      -avoid-version)
-+       avoid_version=yes
-+       continue
-+       ;;
-+
-+      -dlopen)
-+       prev=dlfiles
-+       continue
-+       ;;
-+
-+      -dlpreopen)
-+       prev=dlprefiles
-+       continue
-+       ;;
-+
-+      -export-dynamic)
-+       export_dynamic=yes
-+       continue
-+       ;;
-+
-+      -export-symbols | -export-symbols-regex)
-+       if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-+         $echo "$modename: not more than one -exported-symbols argument allowed"
-+         exit 1
-+       fi
-+       if test "X$arg" = "X-export-symbols"; then
-+         prev=expsyms
-+       else
-+         prev=expsyms_regex
-+       fi
-+       continue
-+       ;;
-+
-+      -L*)
-+       dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
-+       # We need an absolute path.
-+       case "$dir" in
-+       [\\/]* | [A-Za-z]:[\\/]*) ;;
-+       *)
-+         absdir=`cd "$dir" && pwd`
-+         if test -z "$absdir"; then
-+           $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
-+           $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
-+           absdir="$dir"
-+         fi
-+         dir="$absdir"
-+         ;;
-+       esac
-+       case " $deplibs " in
-+       *" $arg "*) ;;
-+       *) deplibs="$deplibs $arg";;
-+       esac
-+       case " $lib_search_path " in
-+       *" $dir "*) ;;
-+       *) lib_search_path="$lib_search_path $dir";;
-+       esac
-+       case "$host" in
-+       *-*-cygwin* | *-*-mingw* | *-*-os2*)
-+         dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
-+         case ":$dllsearchpath:" in
-+         ::) dllsearchpath="$dllsearchdir";;
-+         *":$dllsearchdir:"*) ;;
-+         *) dllsearchpath="$dllsearchpath:$dllsearchdir";;
-+         esac
-+         ;;
-+       esac
-+       ;;
-+
-+      -l*)
-+       if test "$arg" = "-lc"; then
-+         case "$host" in
-+         *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
-+           # These systems don't actually have c library (as such)
-+           continue
-+           ;;
-+         esac
-+       elif test "$arg" = "-lm"; then
-+         case "$host" in
-+         *-*-cygwin* | *-*-beos*)
-+           # These systems don't actually have math library (as such)
-+           continue
-+           ;;
-+         esac
-+       fi
-+       deplibs="$deplibs $arg"
-+       ;;
-+
-+      -module)
-+       module=yes
-+       continue
-+       ;;
-+
-+      -no-undefined)
-+       allow_undefined=no
-+       continue
-+       ;;
-+
-+      -o) prev=output ;;
-+
-+      -release)
-+       prev=release
-+       continue
-+       ;;
-+
-+      -rpath)
-+       prev=rpath
-+       continue
-+       ;;
-+
-+      -R)
-+       prev=xrpath
-+       continue
-+       ;;
-+
-+      -R*)
-+       dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
-+       # We need an absolute path.
-+       case "$dir" in
-+       [\\/]* | [A-Za-z]:[\\/]*) ;;
-+       *)
-+         $echo "$modename: only absolute run-paths are allowed" 1>&2
-+         exit 1
-+         ;;
-+       esac
-+       case "$xrpath " in
-+       *" $dir "*) ;;
-+       *) xrpath="$xrpath $dir" ;;
-+       esac
-+       continue
-+       ;;
-+
-+      -static)
-+       # If we have no pic_flag, then this is the same as -all-static.
-+       if test -z "$pic_flag" && test -n "$link_static_flag"; then
-+         compile_command="$compile_command $link_static_flag"
-+         finalize_command="$finalize_command $link_static_flag"
-+       fi
-+       continue
-+       ;;
-+
-+      -thread-safe)
-+       thread_safe=yes
-+       continue
-+       ;;
-+
-+      -version-info)
-+       prev=vinfo
-+       continue
-+       ;;
-+
-+      # Some other compiler flag.
-+      -* | +*)
-+       # Unknown arguments in both finalize_command and compile_command need
-+       # to be aesthetically quoted because they are evaled later.
-+       arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-+       case "$arg" in
-+       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \   ]*|*]*)
-+         arg="\"$arg\""
-+         ;;
-+       esac
-+       ;;
-+
-+      *.o | *.obj | *.a | *.lib)
-+       # A standard object.
-+       objs="$objs $arg"
-+       ;;
-+
-+      *.lo)
-+       # A library object.
-+       if test "$prev" = dlfiles; then
-+         dlfiles="$dlfiles $arg"
-+         if test "$build_libtool_libs" = yes && test "$dlopen" = yes; then
-+           prev=
-+           continue
-+         else
-+           # If libtool objects are unsupported, then we need to preload.
-+           prev=dlprefiles
-+         fi
-+       fi
-+
-+       if test "$prev" = dlprefiles; then
-+         # Preload the old-style object.
-+         dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
-+         prev=
-+       fi
-+       libobjs="$libobjs $arg"
-+       ;;
-+
-+      *.la)
-+       # A libtool-controlled library.
-+
-+       dlname=
-+       libdir=
-+       library_names=
-+       old_library=
-+
-+       # Check to see that this really is a libtool archive.
-+       if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-+       else
-+         $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2
-+         exit 1
-+       fi
-+
-+       # If the library was installed with an old release of libtool,
-+       # it will not redefine variable installed.
-+       installed=yes
-+
-+       # Read the .la file
-+       # If there is no directory component, then add one.
-+       case "$arg" in
-+       */* | *\\*) . $arg ;;
-+       *) . ./$arg ;;
-+       esac
-+
-+       # Get the name of the library we link against.
-+       linklib=
-+       for l in $old_library $library_names; do
-+         linklib="$l"
-+       done
-+
-+       if test -z "$linklib"; then
-+         $echo "$modename: cannot find name of link library for \`$arg'" 1>&2
-+         exit 1
-+       fi
-+
-+       # Find the relevant object directory and library name.
-+       name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'`
-+
-+       if test "X$installed" = Xyes; then
-+         dir="$libdir"
-+       else
-+         dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-+         if test "X$dir" = "X$arg"; then
-+           dir="$objdir"
-+         else
-+           dir="$dir/$objdir"
-+         fi
-+       fi
-+
-+       if test -n "$dependency_libs"; then
-+         # Extract -R and -L from dependency_libs
-+         temp_deplibs=
-+         for deplib in $dependency_libs; do
-+           case "$deplib" in
-+           -R*) temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
-+                case " $rpath $xrpath " in
-+                *" $temp_xrpath "*) ;;
-+                *) xrpath="$xrpath $temp_xrpath";;
-+                esac;;
-+           -L*) case "$compile_command $temp_deplibs " in
-+                *" $deplib "*) ;;
-+                *) temp_deplibs="$temp_deplibs $deplib";;
-+                esac
-+                temp_dir=`$echo "X$deplib" | $Xsed -e 's/^-L//'`
-+                case " $lib_search_path " in
-+                *" $temp_dir "*) ;;
-+                *) lib_search_path="$lib_search_path $temp_dir";;
-+                esac
-+                ;;
-+           *) temp_deplibs="$temp_deplibs $deplib";;
-+           esac
-+         done
-+         dependency_libs="$temp_deplibs"
-+       fi
-+
-+       if test -z "$libdir"; then
-+         # It is a libtool convenience library, so add in its objects.
-+         convenience="$convenience $dir/$old_library"
-+         old_convenience="$old_convenience $dir/$old_library"
-+         deplibs="$deplibs$dependency_libs"
-+         compile_command="$compile_command $dir/$old_library$dependency_libs"
-+         finalize_command="$finalize_command $dir/$old_library$dependency_libs"
-+         continue
-+       fi
-+
-+       # This library was specified with -dlopen.
-+       if test "$prev" = dlfiles; then
-+         dlfiles="$dlfiles $arg"
-+         if test -z "$dlname" || test "$dlopen" != yes || test "$build_libtool_libs" = no; then
-+           # If there is no dlname, no dlopen support or we're linking statically,
-+           # we need to preload.
-+           prev=dlprefiles
-+         else
-+           # We should not create a dependency on this library, but we
-+           # may need any libraries it requires.
-+           compile_command="$compile_command$dependency_libs"
-+           finalize_command="$finalize_command$dependency_libs"
-+           prev=
-+           continue
-+         fi
-+       fi
-+
-+       # The library was specified with -dlpreopen.
-+       if test "$prev" = dlprefiles; then
-+         # Prefer using a static library (so that no silly _DYNAMIC symbols
-+         # are required to link).
-+         if test -n "$old_library"; then
-+           dlprefiles="$dlprefiles $dir/$old_library"
-+         else
-+           dlprefiles="$dlprefiles $dir/$linklib"
-+         fi
-+         prev=
-+       fi
-+
-+       if test -n "$library_names" &&
-+          { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
-+         link_against_libtool_libs="$link_against_libtool_libs $arg"
-+         if test -n "$shlibpath_var"; then
-+           # Make sure the rpath contains only unique directories.
-+           case "$temp_rpath " in
-+           *" $dir "*) ;;
-+           *) temp_rpath="$temp_rpath $dir" ;;
-+           esac
-+         fi
-+
-+         # We need an absolute path.
-+         case "$dir" in
-+         [\\/] | [A-Za-z]:[\\/]*) absdir="$dir" ;;
-+         *)
-+           absdir=`cd "$dir" && pwd`
-+           if test -z "$absdir"; then
-+             $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
-+             $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
-+             absdir="$dir"
-+           fi
-+           ;;
-+         esac
-+         
-+         # This is the magic to use -rpath.
-+         # Skip directories that are in the system default run-time
-+         # search path, unless they have been requested with -R.
-+         case " $sys_lib_dlsearch_path " in
-+         *" $absdir "*) ;;
-+         *)
-+           case "$compile_rpath " in
-+           *" $absdir "*) ;;
-+           *) compile_rpath="$compile_rpath $absdir" 
-+           esac
-+           ;;
-+         esac
-+
-+         case " $sys_lib_dlsearch_path " in
-+         *" $libdir "*) ;;
-+         *)
-+           case "$finalize_rpath " in
-+           *" $libdir "*) ;;
-+           *) finalize_rpath="$finalize_rpath $libdir"
-+           esac
-+           ;;
-+         esac
-+
-+         lib_linked=yes
-+         case "$hardcode_action" in
-+         immediate | unsupported)
-+           if test "$hardcode_direct" = no; then
-+             compile_command="$compile_command $dir/$linklib"
-+             deplibs="$deplibs $dir/$linklib"
-+             case "$host" in
-+             *-*-cygwin* | *-*-mingw* | *-*-os2*)
-+               dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
-+               if test -n "$dllsearchpath"; then
-+                 dllsearchpath="$dllsearchpath:$dllsearchdir"
-+               else
-+                 dllsearchpath="$dllsearchdir"
-+               fi
-+               ;;
-+             esac
-+           elif test "$hardcode_minus_L" = no; then
-+             case "$host" in
-+             *-*-sunos*)
-+               compile_shlibpath="$compile_shlibpath$dir:"
-+               ;;
-+             esac
-+             case "$compile_command " in
-+             *" -L$dir "*) ;;
-+             *) compile_command="$compile_command -L$dir";;
-+             esac
-+             compile_command="$compile_command -l$name"
-+             deplibs="$deplibs -L$dir -l$name"
-+           elif test "$hardcode_shlibpath_var" = no; then
-+             case ":$compile_shlibpath:" in
-+             *":$dir:"*) ;;
-+             *) compile_shlibpath="$compile_shlibpath$dir:";;
-+             esac
-+             compile_command="$compile_command -l$name"
-+             deplibs="$deplibs -l$name"
-+           else
-+             lib_linked=no
-+           fi
-+           ;;
-+
-+         relink)
-+           if test "$hardcode_direct" = yes; then
-+             compile_command="$compile_command $absdir/$linklib"
-+             deplibs="$deplibs $absdir/$linklib"
-+           elif test "$hardcode_minus_L" = yes; then
-+             case "$compile_command " in
-+             *" -L$absdir "*) ;;
-+             *) compile_command="$compile_command -L$absdir";;
-+             esac
-+             compile_command="$compile_command -l$name"
-+             deplibs="$deplibs -L$absdir -l$name"
-+           elif test "$hardcode_shlibpath_var" = yes; then
-+             case ":$compile_shlibpath:" in
-+             *":$absdir:"*) ;;
-+             *) compile_shlibpath="$compile_shlibpath$absdir:";;
-+             esac
-+             compile_command="$compile_command -l$name"
-+             deplibs="$deplibs -l$name"
-+           else
-+             lib_linked=no
-+           fi
-+           ;;
-+
-+         *)
-+           lib_linked=no
-+           ;;
-+         esac
-+
-+         if test "$lib_linked" != yes; then
-+           $echo "$modename: configuration error: unsupported hardcode properties"
-+           exit 1
-+         fi
-+
-+         # Finalize command for both is simple: just hardcode it.
-+         if test "$hardcode_direct" = yes; then
-+           finalize_command="$finalize_command $libdir/$linklib"
-+         elif test "$hardcode_minus_L" = yes; then
-+           case "$finalize_command " in
-+           *" -L$libdir "*) ;;
-+           *) finalize_command="$finalize_command -L$libdir";;
-+           esac
-+           finalize_command="$finalize_command -l$name"
-+         elif test "$hardcode_shlibpath_var" = yes; then
-+           case ":$finalize_shlibpath:" in
-+           *":$libdir:"*) ;;
-+           *) finalize_shlibpath="$finalize_shlibpath$libdir:";;
-+           esac
-+           finalize_command="$finalize_command -l$name"
-+         else
-+           # We cannot seem to hardcode it, guess we'll fake it.
-+           case "$finalize_command " in
-+           *" -L$dir "*) ;;
-+           *) finalize_command="$finalize_command -L$libdir";;
-+           esac
-+           finalize_command="$finalize_command -l$name"
-+         fi
-+       else
-+         # Transform directly to old archives if we don't build new libraries.
-+         if test -n "$pic_flag" && test -z "$old_library"; then
-+           $echo "$modename: cannot find static library for \`$arg'" 1>&2
-+           exit 1
-+         fi
-+
-+         # Here we assume that one of hardcode_direct or hardcode_minus_L
-+         # is not unsupported.  This is valid on all known static and
-+         # shared platforms.
-+         if test "$hardcode_direct" != unsupported; then
-+           test -n "$old_library" && linklib="$old_library"
-+           compile_command="$compile_command $dir/$linklib"
-+           finalize_command="$finalize_command $dir/$linklib"
-+         else
-+           case "$compile_command " in
-+           *" -L$dir "*) ;;
-+           *) compile_command="$compile_command -L$dir";;
-+           esac
-+           compile_command="$compile_command -l$name"
-+           case "$finalize_command " in
-+           *" -L$dir "*) ;;
-+           *) finalize_command="$finalize_command -L$dir";;
-+           esac
-+           finalize_command="$finalize_command -l$name"
-+         fi
-+       fi
-+
-+       # Add in any libraries that this one depends upon.
-+       compile_command="$compile_command$dependency_libs"
-+       finalize_command="$finalize_command$dependency_libs"
-+       continue
-+       ;;
-+
-+      # Some other compiler argument.
-+      *)
-+       # Unknown arguments in both finalize_command and compile_command need
-+       # to be aesthetically quoted because they are evaled later.
-+       arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-+       case "$arg" in
-+       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \   ]*|*]*)
-+         arg="\"$arg\""
-+         ;;
-+       esac
-+       ;;
-+      esac
-+
-+      # Now actually substitute the argument into the commands.
-+      if test -n "$arg"; then
-+       compile_command="$compile_command $arg"
-+       finalize_command="$finalize_command $arg"
-+      fi
-+    done
-+
-+    if test -n "$prev"; then
-+      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
-+      $echo "$help" 1>&2
-+      exit 1
-+    fi
-+
-+    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
-+      eval arg=\"$export_dynamic_flag_spec\"
-+      compile_command="$compile_command $arg"
-+      finalize_command="$finalize_command $arg"
-+    fi
-+
-+    oldlibs=
-+    # calculate the name of the file, without its directory
-+    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
-+    libobjs_save="$libobjs"
-+
-+    case "$output" in
-+    "")
-+      $echo "$modename: you must specify an output file" 1>&2
-+      $echo "$help" 1>&2
-+      exit 1
-+      ;;
-+
-+    *.a | *.lib)
-+      if test -n "$link_against_libtool_libs"; then
-+       $echo "$modename: error: cannot link libtool libraries into archives" 1>&2
-+       exit 1
-+      fi
-+
-+      if test -n "$deplibs"; then
-+       $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
-+      fi
-+
-+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-+       $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
-+      fi
-+
-+      if test -n "$rpath"; then
-+       $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
-+      fi
-+
-+      if test -n "$xrpath"; then
-+       $echo "$modename: warning: \`-R' is ignored for archives" 1>&2
-+      fi
-+
-+      if test -n "$vinfo"; then
-+       $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
-+      fi
-+
-+      if test -n "$release"; then
-+       $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
-+      fi
-+
-+      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-+       $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
-+      fi
-+
-+      # Now set the variables for building old libraries.
-+      build_libtool_libs=no
-+      oldlibs="$output"
-+      ;;
-+
-+    *.la)
-+      # Make sure we only generate libraries of the form `libNAME.la'.
-+      case "$outputname" in
-+      lib*)
-+       name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-+       eval libname=\"$libname_spec\"
-+       ;;
-+      *)
-+       if test "$module" = no; then
-+         $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
-+         $echo "$help" 1>&2
-+         exit 1
-+       fi
-+       if test "$need_lib_prefix" != no; then
-+         # Add the "lib" prefix for modules if required
-+         name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-+         eval libname=\"$libname_spec\"
-+       else
-+         libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-+       fi
-+       ;;
-+      esac
-+
-+      output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
-+      if test "X$output_objdir" = "X$output"; then
-+       output_objdir="$objdir"
-+      else
-+       output_objdir="$output_objdir/$objdir"
-+      fi
-+
-+      if test -n "$objs"; then
-+       $echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1
-+       exit 1
-+      fi
-+
-+      # How the heck are we supposed to write a wrapper for a shared library?
-+      if test -n "$link_against_libtool_libs"; then
-+        $echo "$modename: error: cannot link shared libraries into libtool libraries" 1>&2
-+        exit 1
-+      fi
-+
-+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-+       $echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2
-+      fi
-+
-+      set dummy $rpath
-+      if test $# -gt 2; then
-+       $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
-+      fi
-+      install_libdir="$2"
-+
-+      oldlibs=
-+      if test -z "$rpath"; then
-+       if test "$build_libtool_libs" = yes; then
-+         # Building a libtool convenience library.
-+         libext=al
-+         oldlibs="$output_objdir/$libname.$libext $oldlibs"
-+         build_libtool_libs=convenience
-+         build_old_libs=yes
-+       fi
-+       dependency_libs="$deplibs"
-+
-+       if test -n "$vinfo"; then
-+         $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
-+       fi
-+
-+       if test -n "$release"; then
-+         $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
-+       fi
-+      else
-+
-+       # Parse the version information argument.
-+       IFS="${IFS=     }"; save_ifs="$IFS"; IFS=':'
-+       set dummy $vinfo 0 0 0
-+       IFS="$save_ifs"
-+
-+       if test -n "$8"; then
-+         $echo "$modename: too many parameters to \`-version-info'" 1>&2
-+         $echo "$help" 1>&2
-+         exit 1
-+       fi
-+
-+       current="$2"
-+       revision="$3"
-+       age="$4"
-+
-+       # Check that each of the things are valid numbers.
-+       case "$current" in
-+       0 | [1-9] | [1-9][0-9]*) ;;
-+       *)
-+         $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
-+         $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-+         exit 1
-+         ;;
-+       esac
-+
-+       case "$revision" in
-+       0 | [1-9] | [1-9][0-9]*) ;;
-+       *)
-+         $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
-+         $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-+         exit 1
-+         ;;
-+       esac
-+
-+       case "$age" in
-+       0 | [1-9] | [1-9][0-9]*) ;;
-+       *)
-+         $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
-+         $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-+         exit 1
-+         ;;
-+       esac
-+
-+       if test $age -gt $current; then
-+         $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
-+         $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-+         exit 1
-+       fi
-+
-+       # Calculate the version variables.
-+       major=
-+       versuffix=
-+       verstring=
-+       case "$version_type" in
-+       none) ;;
-+
-+       irix)
-+         major=`expr $current - $age + 1`
-+         versuffix="$major.$revision"
-+         verstring="sgi$major.$revision"
-+
-+         # Add in all the interfaces that we are compatible with.
-+         loop=$revision
-+         while test $loop != 0; do
-+           iface=`expr $revision - $loop`
-+           loop=`expr $loop - 1`
-+           verstring="sgi$major.$iface:$verstring"
-+         done
-+         ;;
-+
-+       linux)
-+         major=.`expr $current - $age`
-+         versuffix="$major.$age.$revision"
-+         ;;
-+
-+       osf)
-+         major=`expr $current - $age`
-+         versuffix=".$current.$age.$revision"
-+         verstring="$current.$age.$revision"
-+
-+         # Add in all the interfaces that we are compatible with.
-+         loop=$age
-+         while test $loop != 0; do
-+           iface=`expr $current - $loop`
-+           loop=`expr $loop - 1`
-+           verstring="$verstring:${iface}.0"
-+         done
-+
-+         # Make executables depend on our current version.
-+         verstring="$verstring:${current}.0"
-+         ;;
-+
-+       sunos)
-+         major=".$current"
-+         versuffix=".$current.$revision"
-+         ;;
-+
-+       freebsd-aout)
-+         major=".$current"
-+         versuffix=".$current.$revision";
-+         ;;
-+
-+       freebsd-elf)
-+         major=".$current"
-+         versuffix=".$current";
-+         ;;
-+
-+       windows)
-+         # Like Linux, but with '-' rather than '.', since we only
-+         # want one extension on Windows 95.
-+         major=`expr $current - $age`
-+         versuffix="-$major-$age-$revision"
-+         ;;
-+
-+       *)
-+         $echo "$modename: unknown library version type \`$version_type'" 1>&2
-+         echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-+         exit 1
-+         ;;
-+       esac
-+
-+       # Clear the version info if we defaulted, and they specified a release.
-+       if test -z "$vinfo" && test -n "$release"; then
-+         major=
-+         verstring="0.0"
-+         if test "$need_version" = no; then
-+           versuffix=
-+         else
-+           versuffix=".0.0"
-+         fi
-+       fi
-+
-+       # Remove version info from name if versioning should be avoided
-+       if test "$avoid_version" = yes && test "$need_version" = no; then
-+         major=
-+         versuffix=
-+         verstring=""
-+       fi
-+       
-+       # Check to see if the archive will have undefined symbols.
-+       if test "$allow_undefined" = yes; then
-+         if test "$allow_undefined_flag" = unsupported; then
-+           $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
-+           build_libtool_libs=no
-+           build_old_libs=yes
-+         fi
-+       else
-+         # Don't allow undefined symbols.
-+         allow_undefined_flag="$no_undefined_flag"
-+       fi
-+
-+       dependency_libs="$deplibs"
-+       case "$host" in
-+       *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
-+         # these systems don't actually have a c library (as such)!
-+         ;;
-+       *)
-+         # Add libc to deplibs on all other systems.
-+         deplibs="$deplibs -lc"
-+         ;;
-+       esac
-+      fi
-+
-+      # Create the output directory, or remove our outputs if we need to.
-+      if test -d $output_objdir; then
-+       $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*"
-+       $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*
-+      else
-+       $show "$mkdir $output_objdir"
-+       $run $mkdir $output_objdir
-+       status=$?
-+       if test $status -ne 0 && test ! -d $output_objdir; then
-+         exit $status
-+       fi
-+      fi
-+
-+      # Now set the variables for building old libraries.
-+      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
-+       oldlibs="$oldlibs $output_objdir/$libname.$libext"
-+
-+       # Transform .lo files to .o files.
-+       oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
-+      fi
-+
-+      if test "$build_libtool_libs" = yes; then
-+       # Transform deplibs into only deplibs that can be linked in shared.
-+       name_save=$name
-+       libname_save=$libname
-+       release_save=$release
-+       versuffix_save=$versuffix
-+       major_save=$major
-+       # I'm not sure if I'm treating the release correctly.  I think
-+       # release should show up in the -l (ie -lgmp5) so we don't want to
-+       # add it in twice.  Is that correct?
-+       release=""
-+       versuffix=""
-+       major=""
-+       newdeplibs=
-+       droppeddeps=no
-+       case "$deplibs_check_method" in
-+       pass_all)
-+         # Don't check for shared/static.  Everything works.
-+         # This might be a little naive.  We might want to check
-+         # whether the library exists or not.  But this is on
-+         # osf3 & osf4 and I'm not really sure... Just
-+         # implementing what was already the behaviour.
-+         newdeplibs=$deplibs
-+         ;;
-+       test_compile)
-+         # This code stresses the "libraries are programs" paradigm to its
-+         # limits. Maybe even breaks it.  We compile a program, linking it
-+         # against the deplibs as a proxy for the library.  Then we can check
-+         # whether they linked in statically or dynamically with ldd.
-+         $rm conftest.c
-+         cat > conftest.c <<EOF
-+         int main() { return 0; }
-+EOF
-+         $rm conftest
-+         $C_compiler -o conftest conftest.c $deplibs
-+         if test $? -eq 0 ; then
-+           ldd_output=`ldd conftest`
-+           for i in $deplibs; do
-+             name="`expr $i : '-l\(.*\)'`"
-+             # If $name is empty we are operating on a -L argument.
-+             if test "$name" != "" ; then
-+               libname=`eval \\$echo \"$libname_spec\"`
-+               deplib_matches=`eval \\$echo \"$library_names_spec\"`
-+               set dummy $deplib_matches
-+               deplib_match=$2
-+               if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-+                 newdeplibs="$newdeplibs $i"
-+               else
-+                 droppeddeps=yes
-+                 echo
-+                 echo "*** Warning: This library needs some functionality provided by $i."
-+                 echo "*** I have the capability to make that library automatically link in when"
-+                 echo "*** you link to this library.  But I can only do this if you have a"
-+                 echo "*** shared version of the library, which you do not appear to have."
-+               fi
-+             else
-+               newdeplibs="$newdeplibs $i"
-+             fi
-+           done
-+         else
-+           # Error occured in the first compile.  Let's try to salvage the situation:
-+           # Compile a seperate program for each library.
-+           for i in $deplibs; do
-+             name="`expr $i : '-l\(.*\)'`"
-+            # If $name is empty we are operating on a -L argument.
-+             if test "$name" != "" ; then
-+               $rm conftest
-+               $C_compiler -o conftest conftest.c $i
-+               # Did it work?
-+               if test $? -eq 0 ; then
-+                 ldd_output=`ldd conftest`
-+                 libname=`eval \\$echo \"$libname_spec\"`
-+                 deplib_matches=`eval \\$echo \"$library_names_spec\"`
-+                 set dummy $deplib_matches
-+                 deplib_match=$2
-+                 if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-+                   newdeplibs="$newdeplibs $i"
-+                 else
-+                   droppeddeps=yes
-+                   echo
-+                   echo "*** Warning: This library needs some functionality provided by $i."
-+                   echo "*** I have the capability to make that library automatically link in when"
-+                   echo "*** you link to this library.  But I can only do this if you have a"
-+                   echo "*** shared version of the library, which you do not appear to have."
-+                 fi
-+               else
-+                 droppeddeps=yes
-+                 echo
-+                 echo "*** Warning!  Library $i is needed by this library but I was not able to"
-+                 echo "***  make it link in!  You will probably need to install it or some"
-+                 echo "*** library that it depends on before this library will be fully"
-+                 echo "*** functional.  Installing it before continuing would be even better."
-+               fi
-+             else
-+               newdeplibs="$newdeplibs $i"
-+             fi
-+           done
-+         fi
-+         ;;
-+       file_magic*)
-+         set dummy $deplibs_check_method
-+         file_magic_regex="`expr \"$deplibs_check_method\" : \"$2 \(.*\)\"`"
-+         for a_deplib in $deplibs; do
-+           name="`expr $a_deplib : '-l\(.*\)'`"
-+           # If $name is empty we are operating on a -L argument.
-+           if test "$name" != "" ; then
-+             libname=`eval \\$echo \"$libname_spec\"`
-+             for i in $lib_search_path; do
-+                   potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-+                   for potent_lib in $potential_libs; do
-+                     # Follow soft links.
-+                     if ls -lLd "$potent_lib" 2>/dev/null \
-+                        | grep " -> " >/dev/null; then
-+                       continue 
-+                     fi
-+                     # The statement above tries to avoid entering an
-+                     # endless loop below, in case of cyclic links.
-+                     # We might still enter an endless loop, since a link
-+                     # loop can be closed while we follow links,
-+                     # but so what?
-+                     potlib="$potent_lib"
-+                     while test -h "$potlib" 2>/dev/null; do
-+                       potliblink=`ls -ld $potlib | sed 's/.* -> //'`
-+                       case "$potliblink" in
-+                       [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-+                       *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
-+                       esac
-+                     done
-+                     if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
-+                        | sed 10q \
-+                        | egrep "$file_magic_regex" > /dev/null; then
-+                       newdeplibs="$newdeplibs $a_deplib"
-+                       a_deplib=""
-+                       break 2
-+                     fi
-+                   done
-+             done
-+             if test -n "$a_deplib" ; then
-+               droppeddeps=yes
-+               echo
-+               echo "*** Warning: This library needs some functionality provided by $a_deplib."
-+               echo "*** I have the capability to make that library automatically link in when"
-+               echo "*** you link to this library.  But I can only do this if you have a"
-+               echo "*** shared version of the library, which you do not appear to have."
-+             fi
-+           else
-+             # Add a -L argument.
-+             newdeplibs="$newdeplibs $a_deplib"
-+           fi
-+         done # Gone through all deplibs.
-+         ;;
-+       none | unknown | *)
-+         newdeplibs=""
-+         if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
-+              -e 's/ -[LR][^ ]*//g' -e 's/[    ]//g' |
-+            grep . >/dev/null; then
-+           echo
-+           if test "X$deplibs_check_method" = "Xnone"; then
-+             echo "*** Warning: inter-library dependencies are not supported in this platform."
-+           else
-+             echo "*** Warning: inter-library dependencies are not known to be supported."
-+           fi
-+           echo "*** All declared inter-library dependencies are being dropped."
-+           droppeddeps=yes
-+         fi
-+         ;;
-+       esac
-+       versuffix=$versuffix_save
-+       major=$major_save
-+       release=$release_save
-+       libname=$libname_save
-+       name=$name_save
-+
-+       if test "$droppeddeps" = yes; then
-+         if test "$module" = yes; then
-+           echo
-+           echo "*** Warning: libtool could not satisfy all declared inter-library"
-+           echo "*** dependencies of module $libname.  Therefore, libtool will create"
-+           echo "*** a static module, that should work as long as the dlopening"
-+           echo "*** application is linked with the -dlopen flag."
-+           if test -z "$global_symbol_pipe"; then
-+             echo
-+             echo "*** However, this would only work if libtool was able to extract symbol"
-+             echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-+             echo "*** not find such a program.  So, this module is probably useless."
-+             echo "*** \`nm' from GNU binutils and a full rebuild may help."
-+           fi
-+           if test "$build_old_libs" = no; then
-+             oldlibs="$output_objdir/$libname.$libext"
-+             build_libtool_libs=module
-+             build_old_libs=yes
-+           else
-+             build_libtool_libs=no
-+           fi
-+         else
-+           echo "*** The inter-library dependencies that have been dropped here will be"
-+           echo "*** automatically added whenever a program is linked with this library"
-+           echo "*** or is declared to -dlopen it."
-+         fi
-+       fi
-+       # Done checking deplibs!
-+       deplibs=$newdeplibs
-+      fi
-+
-+      # All the library-specific variables (install_libdir is set above).
-+      library_names=
-+      old_library=
-+      dlname=
-+      
-+      # Test again, we may have decided not to build it any more
-+      if test "$build_libtool_libs" = yes; then
-+       # Get the real and link names of the library.
-+       eval library_names=\"$library_names_spec\"
-+       set dummy $library_names
-+       realname="$2"
-+       shift; shift
-+
-+       if test -n "$soname_spec"; then
-+         eval soname=\"$soname_spec\"
-+       else
-+         soname="$realname"
-+       fi
-+
-+       lib="$output_objdir/$realname"
-+       for link
-+       do
-+         linknames="$linknames $link"
-+       done
-+
-+       # Ensure that we have .o objects for linkers which dislike .lo
-+       # (e.g. aix) incase we are running --disable-static
-+       for obj in $libobjs; do
-+         oldobj=`$echo "X$obj" | $Xsed -e "$lo2o"`
-+         if test ! -f $oldobj; then
-+           $show "${LN_S} $obj $oldobj"
-+           $run ${LN_S} $obj $oldobj || exit $?
-+         fi
-+       done
-+
-+       # Use standard objects if they are pic
-+       test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-+
-+       # Prepare the list of exported symbols
-+       if test -z "$export_symbols"; then
-+         if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
-+           $show "generating symbol list for \`$libname.la'"
-+           export_symbols="$output_objdir/$libname.exp"
-+           $run $rm $export_symbols
-+           eval cmds=\"$export_symbols_cmds\"
-+           IFS="${IFS=         }"; save_ifs="$IFS"; IFS='~'
-+           for cmd in $cmds; do
-+             IFS="$save_ifs"
-+             $show "$cmd"
-+             $run eval "$cmd" || exit $?
-+           done
-+           IFS="$save_ifs"
-+           if test -n "$export_symbols_regex"; then
-+             $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
-+             $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-+             $show "$mv \"${export_symbols}T\" \"$export_symbols\""
-+             $run eval '$mv "${export_symbols}T" "$export_symbols"'
-+           fi
-+         fi
-+       fi
-+
-+       if test -n "$export_symbols" && test -n "$include_expsyms"; then
-+         $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
-+       fi
-+
-+       if test -n "$convenience"; then
-+         if test -n "$whole_archive_flag_spec"; then
-+           eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-+         else
-+           gentop="$output_objdir/${outputname}x"
-+           $show "${rm}r $gentop"
-+           $run ${rm}r "$gentop"
-+           $show "mkdir $gentop"
-+           $run mkdir "$gentop"
-+           status=$?
-+           if test $status -ne 0 && test ! -d "$gentop"; then
-+             exit $status
-+           fi
-+           generated="$generated $gentop"
-+
-+           for xlib in $convenience; do
-+             # Extract the objects.
-+             case "$xlib" in
-+             [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-+             *) xabs=`pwd`"/$xlib" ;;
-+             esac
-+             xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-+             xdir="$gentop/$xlib"
-+
-+             $show "${rm}r $xdir"
-+             $run ${rm}r "$xdir"
-+             $show "mkdir $xdir"
-+             $run mkdir "$xdir"
-+             status=$?
-+             if test $status -ne 0 && test ! -d "$xdir"; then
-+               exit $status
-+             fi
-+             $show "(cd $xdir && $AR x $xabs)"
-+             $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-+
-+             libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
-+           done
-+         fi
-+       fi
-+
-+       if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
-+         eval flag=\"$thread_safe_flag_spec\"
-+         linkopts="$linkopts $flag"
-+       fi
-+
-+       # Do each of the archive commands.
-+       if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-+         eval cmds=\"$archive_expsym_cmds\"
-+       else
-+         eval cmds=\"$archive_cmds\"
-+       fi
-+       IFS="${IFS=     }"; save_ifs="$IFS"; IFS='~'
-+       for cmd in $cmds; do
-+         IFS="$save_ifs"
-+         $show "$cmd"
-+         $run eval "$cmd" || exit $?
-+       done
-+       IFS="$save_ifs"
-+
-+       # Create links to the real library.
-+       for linkname in $linknames; do
-+         if test "$realname" != "$linkname"; then
-+           $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
-+           $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
-+         fi
-+       done
-+
-+       # If -module or -export-dynamic was specified, set the dlname.
-+       if test "$module" = yes || test "$export_dynamic" = yes; then
-+         # On all known operating systems, these are identical.
-+         dlname="$soname"
-+       fi
-+      fi
-+      ;;
-+
-+    *.lo | *.o | *.obj)
-+      if test -n "$link_against_libtool_libs"; then
-+       $echo "$modename: error: cannot link libtool libraries into objects" 1>&2
-+       exit 1
-+      fi
-+
-+      if test -n "$deplibs"; then
-+       $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
-+      fi
-+
-+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-+       $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
-+      fi
-+
-+      if test -n "$rpath"; then
-+       $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
-+      fi
-+
-+      if test -n "$xrpath"; then
-+       $echo "$modename: warning: \`-R' is ignored for objects" 1>&2
-+      fi
-+
-+      if test -n "$vinfo"; then
-+       $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
-+      fi
-+
-+      if test -n "$release"; then
-+       $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
-+      fi
-+
-+      case "$output" in
-+      *.lo)
-+       if test -n "$objs"; then
-+         $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
-+         exit 1
-+       fi
-+       libobj="$output"
-+       obj=`$echo "X$output" | $Xsed -e "$lo2o"`
-+       ;;
-+      *)
-+       libobj=
-+       obj="$output"
-+       ;;
-+      esac
-+
-+      # Delete the old objects.
-+      $run $rm $obj $libobj
-+
-+      # Objects from convenience libraries.  This assumes
-+      # single-version convenience libraries.  Whenever we create
-+      # different ones for PIC/non-PIC, this we'll have to duplicate
-+      # the extraction.
-+      reload_conv_objs=
-+      gentop=
-+      # reload_cmds runs $LD directly, so let us get rid of
-+      # -Wl from whole_archive_flag_spec
-+      wl= 
-+
-+      if test -n "$convenience"; then
-+       if test -n "$whole_archive_flag_spec"; then
-+         eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
-+       else
-+         gentop="$output_objdir/${obj}x"
-+         $show "${rm}r $gentop"
-+         $run ${rm}r "$gentop"
-+         $show "mkdir $gentop"
-+         $run mkdir "$gentop"
-+         status=$?
-+         if test $status -ne 0 && test ! -d "$gentop"; then
-+           exit $status
-+         fi
-+         generated="$generated $gentop"
-+
-+         for xlib in $convenience; do
-+           # Extract the objects.
-+           case "$xlib" in
-+           [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-+           *) xabs=`pwd`"/$xlib" ;;
-+           esac
-+           xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-+           xdir="$gentop/$xlib"
-+
-+           $show "${rm}r $xdir"
-+           $run ${rm}r "$xdir"
-+           $show "mkdir $xdir"
-+           $run mkdir "$xdir"
-+           status=$?
-+           if test $status -ne 0 && test ! -d "$xdir"; then
-+             exit $status
-+           fi
-+           $show "(cd $xdir && $AR x $xabs)"
-+           $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-+
-+           reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
-+         done
-+       fi
-+      fi
-+
-+      # Create the old-style object.
-+      reload_objs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs"
-+
-+      output="$obj"
-+      eval cmds=\"$reload_cmds\"
-+      IFS="${IFS=      }"; save_ifs="$IFS"; IFS='~'
-+      for cmd in $cmds; do
-+       IFS="$save_ifs"
-+       $show "$cmd"
-+       $run eval "$cmd" || exit $?
-+      done
-+      IFS="$save_ifs"
-+
-+      # Exit if we aren't doing a library object file.
-+      if test -z "$libobj"; then
-+       if test -n "$gentop"; then
-+         $show "${rm}r $gentop"
-+         $run ${rm}r $gentop
-+       fi
-+
-+       exit 0
-+      fi
-+
-+      if test "$build_libtool_libs" != yes; then
-+       if test -n "$gentop"; then
-+         $show "${rm}r $gentop"
-+         $run ${rm}r $gentop
-+       fi
-+
-+       # Create an invalid libtool object if no PIC, so that we don't
-+       # accidentally link it into a program.
-+       $show "echo timestamp > $libobj"
-+       $run eval "echo timestamp > $libobj" || exit $?
-+       exit 0
-+      fi
-+
-+      if test -n "$pic_flag"; then
-+       # Only do commands if we really have different PIC objects.
-+       reload_objs="$libobjs $reload_conv_objs"
-+       output="$libobj"
-+       eval cmds=\"$reload_cmds\"
-+       IFS="${IFS=     }"; save_ifs="$IFS"; IFS='~'
-+       for cmd in $cmds; do
-+         IFS="$save_ifs"
-+         $show "$cmd"
-+         $run eval "$cmd" || exit $?
-+       done
-+       IFS="$save_ifs"
-+      else
-+       # Just create a symlink.
-+       $show $rm $libobj
-+       $run $rm $libobj
-+       $show "$LN_S $obj $libobj"
-+       $run $LN_S $obj $libobj || exit $?
-+      fi
-+
-+      if test -n "$gentop"; then
-+       $show "${rm}r $gentop"
-+       $run ${rm}r $gentop
-+      fi
-+
-+      exit 0
-+      ;;
-+
-+    # Anything else should be a program.
-+    *)
-+      if test -n "$vinfo"; then
-+       $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
-+      fi
-+
-+      if test -n "$release"; then
-+       $echo "$modename: warning: \`-release' is ignored for programs" 1>&2
-+      fi
-+
-+      if test "$preload" = yes; then
-+       if test "$dlopen" = unknown && test "$dlopen_self" = unknown &&
-+          test "$dlopen_self_static" = unknown; then
-+         $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
-+       fi 
-+      fi
-+    
-+      if test -n "$rpath$xrpath"; then
-+       # If the user specified any rpath flags, then add them.
-+       for libdir in $rpath $xrpath; do
-+         # This is the magic to use -rpath.
-+         case "$compile_rpath " in
-+         *" $libdir "*) ;;
-+         *) compile_rpath="$compile_rpath $libdir" ;;
-+         esac
-+         case "$finalize_rpath " in
-+         *" $libdir "*) ;;
-+         *) finalize_rpath="$finalize_rpath $libdir" ;;
-+         esac
-+       done
-+      fi
-+
-+      # Now hardcode the library paths
-+      rpath=
-+      hardcode_libdirs=
-+      for libdir in $compile_rpath $finalize_rpath; do
-+       if test -n "$hardcode_libdir_flag_spec"; then
-+         if test -n "$hardcode_libdir_separator"; then
-+           if test -z "$hardcode_libdirs"; then
-+             hardcode_libdirs="$libdir"
-+           else
-+             # Just accumulate the unique libdirs.
-+             case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
-+             *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-+               ;;
-+             *)
-+               hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-+               ;;
-+             esac
-+           fi
-+         else
-+           eval flag=\"$hardcode_libdir_flag_spec\"
-+           rpath="$rpath $flag"
-+         fi
-+       elif test -n "$runpath_var"; then
-+         case "$perm_rpath " in
-+         *" $libdir "*) ;;
-+         *) perm_rpath="$perm_rpath $libdir" ;;
-+         esac
-+       fi
-+      done
-+      # Substitute the hardcoded libdirs into the rpath.
-+      if test -n "$hardcode_libdir_separator" &&
-+        test -n "$hardcode_libdirs"; then
-+       libdir="$hardcode_libdirs"
-+       eval rpath=\" $hardcode_libdir_flag_spec\"
-+      fi
-+      compile_rpath="$rpath"
-+
-+      rpath=
-+      hardcode_libdirs=
-+      for libdir in $finalize_rpath; do
-+       if test -n "$hardcode_libdir_flag_spec"; then
-+         if test -n "$hardcode_libdir_separator"; then
-+           if test -z "$hardcode_libdirs"; then
-+             hardcode_libdirs="$libdir"
-+           else
-+             # Just accumulate the unique libdirs.
-+             case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
-+             *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-+               ;;
-+             *)
-+               hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-+               ;;
-+             esac
-+           fi
-+         else
-+           eval flag=\"$hardcode_libdir_flag_spec\"
-+           rpath="$rpath $flag"
-+         fi
-+       elif test -n "$runpath_var"; then
-+         case "$finalize_perm_rpath " in
-+         *" $libdir "*) ;;
-+         *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
-+         esac
-+       fi
-+      done
-+      # Substitute the hardcoded libdirs into the rpath.
-+      if test -n "$hardcode_libdir_separator" &&
-+        test -n "$hardcode_libdirs"; then
-+       libdir="$hardcode_libdirs"
-+       eval rpath=\" $hardcode_libdir_flag_spec\"
-+      fi
-+      finalize_rpath="$rpath"
-+
-+      output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
-+      if test "X$output_objdir" = "X$output"; then
-+       output_objdir="$objdir"
-+      else
-+       output_objdir="$output_objdir/$objdir"
-+      fi
-+
-+      # Create the binary in the object directory, then wrap it.
-+      if test ! -d $output_objdir; then
-+       $show "$mkdir $output_objdir"
-+       $run $mkdir $output_objdir
-+       status=$?
-+       if test $status -ne 0 && test ! -d $output_objdir; then
-+         exit $status
-+       fi
-+      fi
-+
-+      if test -n "$libobjs" && test "$build_old_libs" = yes; then
-+       # Transform all the library objects into standard objects.
-+       compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-+       finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-+      fi
-+
-+      dlsyms=
-+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-+       if test -n "$NM" && test -n "$global_symbol_pipe"; then
-+         dlsyms="${outputname}S.c"
-+       else
-+         $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
-+       fi
-+      fi
-+
-+      if test -n "$dlsyms"; then
-+       case "$dlsyms" in
-+       "") ;;
-+       *.c)
-+         # Discover the nlist of each of the dlfiles.
-+         nlist="$output_objdir/${outputname}.nm"
-+
-+         $show "$rm $nlist ${nlist}S ${nlist}T"
-+         $run $rm "$nlist" "${nlist}S" "${nlist}T"
-+
-+         # Parse the name list into a source file.
-+         $show "creating $output_objdir/$dlsyms"
-+
-+         test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-+/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-+/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
-+
-+#ifdef __cplusplus
-+extern \"C\" {
-+#endif
-+
-+/* Prevent the only kind of declaration conflicts we can make. */
-+#define lt_preloaded_symbols some_other_symbol
-+
-+/* External symbol declarations for the compiler. */\
-+"
-+
-+         if test "$dlself" = yes; then
-+           $show "generating symbol list for \`$output'"
-+
-+           test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-+
-+           # Add our own program objects to the symbol list.
-+           progfiles=`$echo "X$objs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-+           for arg in $progfiles; do
-+             $show "extracting global C symbols from \`$arg'"
-+             $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-+           done
-+
-+           if test -n "$exclude_expsyms"; then
-+             $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
-+             $run eval '$mv "$nlist"T "$nlist"'
-+           fi
-+           
-+           if test -n "$export_symbols_regex"; then
-+             $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
-+             $run eval '$mv "$nlist"T "$nlist"'
-+           fi
-+
-+           # Prepare the list of exported symbols
-+           if test -z "$export_symbols"; then
-+             export_symbols="$output_objdir/$output.exp"
-+             $run $rm $export_symbols
-+             $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-+           else
-+             $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
-+             $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
-+             $run eval 'mv "$nlist"T "$nlist"'
-+           fi
-+         fi
-+
-+         for arg in $dlprefiles; do
-+           $show "extracting global C symbols from \`$arg'"
-+           name=`echo "$arg" | sed -e 's%^.*/%%'`
-+           $run eval 'echo ": $name " >> "$nlist"'
-+           $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-+         done
-+
-+         if test -z "$run"; then
-+           # Make sure we have at least an empty file.
-+           test -f "$nlist" || : > "$nlist"
-+
-+           if test -n "$exclude_expsyms"; then
-+             egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
-+             $mv "$nlist"T "$nlist"
-+           fi
-+
-+           # Try sorting and uniquifying the output.
-+           if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
-+             :
-+           else
-+             grep -v "^: " < "$nlist" > "$nlist"S
-+           fi
-+
-+           if test -f "$nlist"S; then
-+             eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
-+           else
-+             echo '/* NONE */' >> "$output_objdir/$dlsyms"
-+           fi
-+
-+           $echo >> "$output_objdir/$dlsyms" "\
-+
-+#undef lt_preloaded_symbols
-+
-+#if defined (__STDC__) && __STDC__
-+# define lt_ptr_t void *
-+#else
-+# define lt_ptr_t char *
-+# define const
-+#endif
-+
-+/* The mapping between symbol names and symbols. */
-+const struct {
-+  const char *name;
-+  lt_ptr_t address;
-+}
-+lt_preloaded_symbols[] =
-+{\
-+"
-+
-+           sed -n -e 's/^: \([^ ]*\) $/  {\"\1\", (lt_ptr_t) 0},/p' \
-+               -e 's/^. \([^ ]*\) \([^ ]*\)$/  {"\2", (lt_ptr_t) \&\2},/p' \
-+                 < "$nlist" >> "$output_objdir/$dlsyms"
-+
-+           $echo >> "$output_objdir/$dlsyms" "\
-+  {0, (lt_ptr_t) 0}
-+};
-+
-+/* This works around a problem in FreeBSD linker */
-+#ifdef FREEBSD_WORKAROUND
-+static const void *lt_preloaded_setup() {
-+  return lt_preloaded_symbols;
-+}
-+#endif
-+
-+#ifdef __cplusplus
-+}
-+#endif\
-+"
-+         fi
-+
-+         pic_flag_for_symtable=
-+         case "$host" in
-+         # compiling the symbol table file with pic_flag works around
-+         # a FreeBSD bug that causes programs to crash when -lm is
-+         # linked before any other PIC object.  But we must not use
-+         # pic_flag when linking with -static.  The problem exists in
-+         # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-+         *-*-freebsd2*|*-*-freebsd3.0*)
-+           case "$compile_command " in
-+           *" -static "*) ;;
-+           *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";;
-+           esac
-+         esac
-+
-+         # Now compile the dynamic symbol file.
-+         $show "(cd $output_objdir && $C_compiler -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-+         $run eval '(cd $output_objdir && $C_compiler -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-+
-+         # Clean up the generated files.
-+         $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
-+         $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-+
-+         # Transform the symbol file into the correct name.
-+         compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-+         finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-+         ;;
-+       *)
-+         $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
-+         exit 1
-+         ;;
-+       esac
-+      else
-+       # We keep going just in case the user didn't refer to
-+       # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
-+       # really was required.
-+
-+       # Nullify the symbol file.
-+       compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-+       finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
-+      fi
-+
-+      if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then
-+       # Replace the output file specification.
-+       compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-+       link_command="$compile_command$compile_rpath"
-+
-+       # We have no uninstalled library dependencies, so finalize right now.
-+       $show "$link_command"
-+       $run eval "$link_command"
-+       status=$?
-+       
-+       # Delete the generated files.
-+       if test -n "$dlsyms"; then
-+         $show "$rm $output_objdir/${outputname}S.${objext}"
-+         $run $rm "$output_objdir/${outputname}S.${objext}"
-+       fi
-+
-+       exit $status
-+      fi
-+
-+      if test -n "$shlibpath_var"; then
-+       # We should set the shlibpath_var
-+       rpath=
-+       for dir in $temp_rpath; do
-+         case "$dir" in
-+         [\\/]* | [A-Za-z]:[\\/]*)
-+           # Absolute path.
-+           rpath="$rpath$dir:"
-+           ;;
-+         *)
-+           # Relative path: add a thisdir entry.
-+           rpath="$rpath\$thisdir/$dir:"
-+           ;;
-+         esac
-+       done
-+       temp_rpath="$rpath"
-+      fi
-+
-+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
-+       compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
-+      fi
-+      if test -n "$finalize_shlibpath"; then
-+       finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
-+      fi
-+
-+      compile_var=
-+      finalize_var=
-+      if test -n "$runpath_var"; then
-+       if test -n "$perm_rpath"; then
-+         # We should set the runpath_var.
-+         rpath=
-+         for dir in $perm_rpath; do
-+           rpath="$rpath$dir:"
-+         done
-+         compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
-+       fi
-+       if test -n "$finalize_perm_rpath"; then
-+         # We should set the runpath_var.
-+         rpath=
-+         for dir in $finalize_perm_rpath; do
-+           rpath="$rpath$dir:"
-+         done
-+         finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
-+       fi
-+      fi
-+
-+      if test "$hardcode_action" = relink; then
-+       # Fast installation is not supported
-+       link_command="$compile_var$compile_command$compile_rpath"
-+       relink_command="$finalize_var$finalize_command$finalize_rpath"
-+       
-+       $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
-+       $echo "$modename: \`$output' will be relinked during installation" 1>&2
-+      else
-+       if test "$fast_install" != no; then
-+         link_command="$finalize_var$compile_command$finalize_rpath"
-+         if test "$fast_install" = yes; then
-+           relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
-+         else
-+           # fast_install is set to needless
-+           relink_command=
-+         fi
-+       else
-+         link_command="$compile_var$compile_command$compile_rpath"
-+         relink_command="$finalize_var$finalize_command$finalize_rpath"
-+       fi
-+      fi
-+
-+      # Replace the output file specification.
-+      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-+      
-+      # Delete the old output files.
-+      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
-+
-+      $show "$link_command"
-+      $run eval "$link_command" || exit $?
-+
-+      # Now create the wrapper script.
-+      $show "creating $output"
-+
-+      # Quote the relink command for shipping.
-+      if test -n "$relink_command"; then
-+       relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-+      fi
-+
-+      # Quote $echo for shipping.
-+      if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
-+       case "$0" in
-+       [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
-+       *) qecho="$SHELL `pwd`/$0 --fallback-echo";;
-+       esac
-+       qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
-+      else
-+       qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
-+      fi
-+
-+      # Only actually do things if our run command is non-null.
-+      if test -z "$run"; then
-+       # win32 will think the script is a binary if it has
-+       # a .exe suffix, so we strip it off here.
-+       case $output in
-+         *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
-+       esac
-+       $rm $output
-+       trap "$rm $output; exit 1" 1 2 15
-+
-+       $echo > $output "\
-+#! $SHELL
-+
-+# $output - temporary wrapper script for $objdir/$outputname
-+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-+#
-+# The $output program cannot be directly executed until all the libtool
-+# libraries that it depends on are installed.
-+#
-+# This wrapper script should never be moved out of the build directory.
-+# If it is, it will not operate correctly.
-+
-+# Sed substitution that helps us do robust quoting.  It backslashifies
-+# metacharacters that are still active within double-quoted strings.
-+Xsed='sed -e 1s/^X//'
-+sed_quote_subst='$sed_quote_subst'
-+
-+# The HP-UX ksh and POSIX shell print the target directory to stdout
-+# if CDPATH is set.
-+if test \"\${CDPATH+set}\" = set; then CDPATH=; export CDPATH; fi
-+
-+relink_command=\"$relink_command\"
-+
-+# This environment variable determines our operation mode.
-+if test \"\$libtool_install_magic\" = \"$magic\"; then
-+  # install mode needs the following variable:
-+  link_against_libtool_libs='$link_against_libtool_libs'
-+else
-+  # When we are sourced in execute mode, \$file and \$echo are already set.
-+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
-+    echo=\"$qecho\"
-+    file=\"\$0\"
-+    # Make sure echo works.
-+    if test \"X\$1\" = X--no-reexec; then
-+      # Discard the --no-reexec flag, and continue.
-+      shift
-+    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
-+      # Yippee, \$echo works!
-+      :
-+    else
-+      # Restart under the correct shell, and then maybe \$echo will work.
-+      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
-+    fi
-+  fi\
-+"
-+       $echo >> $output "\
-+
-+  # Find the directory that this script lives in.
-+  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
-+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-+
-+  # Follow symbolic links until we get to the real thisdir.
-+  file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
-+  while test -n \"\$file\"; do
-+    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-+
-+    # If there was a directory component, then change thisdir.
-+    if test \"x\$destdir\" != \"x\$file\"; then
-+      case \"\$destdir\" in
-+      [\\/]* | [A-Za-z]:[\\/]*) thisdir=\"\$destdir\" ;;
-+      *) thisdir=\"\$thisdir/\$destdir\" ;;
-+      esac
-+    fi
-+
-+    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-+    file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
-+  done
-+
-+  # Try to get the absolute directory name.
-+  absdir=\`cd \"\$thisdir\" && pwd\`
-+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
-+"
-+
-+       if test "$fast_install" = yes; then
-+         echo >> $output "\
-+  program=lt-'$outputname'
-+  progdir=\"\$thisdir/$objdir\"
-+  
-+  if test ! -f \"\$progdir/\$program\" || \\
-+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
-+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-+
-+    file=\"\$\$-\$program\"
-+
-+    if test ! -d \"\$progdir\"; then
-+      $mkdir \"\$progdir\"
-+    else
-+      $rm \"\$progdir/\$file\"
-+    fi"
-+
-+         echo >> $output "\
-+
-+    # relink executable if necessary
-+    if test -n \"\$relink_command\"; then
-+      if (cd \"\$thisdir\" && eval \$relink_command); then :
-+      else
-+       $rm \"\$progdir/\$file\"
-+       exit 1
-+      fi
-+    fi
-+
-+    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
-+    { $rm \"\$progdir/\$program\";
-+      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
-+    $rm \"\$progdir/\$file\"
-+  fi"
-+       else
-+         echo >> $output "\
-+  program='$outputname$exeext'
-+  progdir=\"\$thisdir/$objdir\"
-+"
-+       fi
-+
-+       echo >> $output "\
-+
-+  if test -f \"\$progdir/\$program\"; then"
-+
-+       # Export our shlibpath_var if we have one.
-+       if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-+         $echo >> $output "\
-+    # Add our own library path to $shlibpath_var
-+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-+
-+    # Some systems cannot cope with colon-terminated $shlibpath_var
-+    # The second colon is a workaround for a bug in BeOS R4 sed
-+    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-+
-+    export $shlibpath_var
-+"
-+       fi
-+
-+       # fixup the dll searchpath if we need to.
-+       if test -n "$dllsearchpath"; then
-+         $echo >> $output "\
-+    # Add the dll search path components to the executable PATH
-+    PATH=$dllsearchpath:\$PATH
-+"
-+       fi
-+
-+       $echo >> $output "\
-+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
-+      # Run the actual program with our arguments.
-+"
-+       case $host in
-+       *-*-cygwin* | *-*-mingw | *-*-os2*)
-+         # win32 systems need to use the prog path for dll
-+         # lookup to work
-+         $echo >> $output "\
-+      exec \$progdir\\\\\$program \${1+\"\$@\"}
-+"
-+         ;;
-+       *)
-+         $echo >> $output "\
-+      # Export the path to the program.
-+      PATH=\"\$progdir:\$PATH\"
-+      export PATH
-+
-+      exec \$program \${1+\"\$@\"}
-+"
-+         ;;
-+       esac
-+       $echo >> $output "\
-+      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
-+      exit 1
-+    fi
-+  else
-+    # The program doesn't exist.
-+    \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
-+    \$echo \"This script is just a wrapper for \$program.\" 1>&2
-+    echo \"See the $PACKAGE documentation for more information.\" 1>&2
-+    exit 1
-+  fi
-+fi\
-+"
-+       chmod +x $output
-+      fi
-+      exit 0
-+      ;;
-+    esac
-+
-+    # See if we need to build an old-fashioned archive.
-+    for oldlib in $oldlibs; do
-+
-+      if test "$build_libtool_libs" = convenience; then
-+       oldobjs="$libobjs_save"
-+       addlibs="$convenience"
-+       build_libtool_libs=no
-+      else
-+       if test "$build_libtool_libs" = module; then
-+         oldobjs="$libobjs_save"
-+         build_libtool_libs=no
-+       else
-+         oldobjs="$objs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`
-+       fi
-+       addlibs="$old_convenience"
-+      fi
-+
-+      if test -n "$addlibs"; then
-+       gentop="$output_objdir/${outputname}x"
-+       $show "${rm}r $gentop"
-+       $run ${rm}r "$gentop"
-+       $show "mkdir $gentop"
-+       $run mkdir "$gentop"
-+       status=$?
-+       if test $status -ne 0 && test ! -d "$gentop"; then
-+         exit $status
-+       fi
-+       generated="$generated $gentop"
-+         
-+       # Add in members from convenience archives.
-+       for xlib in $addlibs; do
-+         # Extract the objects.
-+         case "$xlib" in
-+         [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-+         *) xabs=`pwd`"/$xlib" ;;
-+         esac
-+         xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-+         xdir="$gentop/$xlib"
-+
-+         $show "${rm}r $xdir"
-+         $run ${rm}r "$xdir"
-+         $show "mkdir $xdir"
-+         $run mkdir "$xdir"
-+         status=$?
-+         if test $status -ne 0 && test ! -d "$xdir"; then
-+           exit $status
-+         fi
-+         $show "(cd $xdir && $AR x $xabs)"
-+         $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-+
-+         oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
-+       done
-+      fi
-+
-+      # Do each command in the archive commands.
-+      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-+       eval cmds=\"$old_archive_from_new_cmds\"
-+      else
-+       # Ensure that we have .o objects in place incase we decided
-+       # not to build a shared library, and have fallen back to building
-+       # static libs even though --disable-static was passed!
-+       for oldobj in $oldobjs; do
-+         if test ! -f $oldobj; then
-+           obj=`$echo "X$oldobj" | $Xsed -e "$o2lo"`
-+           $show "${LN_S} $obj $oldobj"
-+           $run ${LN_S} $obj $oldobj || exit $?
-+         fi
-+       done
-+
-+       eval cmds=\"$old_archive_cmds\"
-+      fi
-+      IFS="${IFS=      }"; save_ifs="$IFS"; IFS='~'
-+      for cmd in $cmds; do
-+       IFS="$save_ifs"
-+       $show "$cmd"
-+       $run eval "$cmd" || exit $?
-+      done
-+      IFS="$save_ifs"
-+    done
-+
-+    if test -n "$generated"; then
-+      $show "${rm}r$generated"
-+      $run ${rm}r$generated
-+    fi
-+
-+    # Now create the libtool archive.
-+    case "$output" in
-+    *.la)
-+      old_library=
-+      test "$build_old_libs" = yes && old_library="$libname.$libext"
-+      $show "creating $output"
-+
-+      if test -n "$xrpath"; then
-+       temp_xrpath=
-+       for libdir in $xrpath; do
-+         temp_xrpath="$temp_xrpath -R$libdir"
-+       done
-+       dependency_libs="$temp_xrpath $dependency_libs"
-+      fi
-+
-+      # Only create the output if not a dry run.
-+      if test -z "$run"; then
-+       for installed in no yes; do
-+         if test "$installed" = yes; then
-+           if test -z "$install_libdir"; then
-+             break
-+           fi
-+           output="$output_objdir/$outputname"i
-+         fi
-+         $rm $output
-+         $echo > $output "\
-+# $outputname - a libtool library file
-+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-+#
-+# Please DO NOT delete this file!
-+# It is necessary for linking the library.
-+
-+# The name that we can dlopen(3).
-+dlname='$dlname'
-+
-+# Names of this library.
-+library_names='$library_names'
-+
-+# The name of the static archive.
-+old_library='$old_library'
-+
-+# Libraries that this one depends upon.
-+dependency_libs='$dependency_libs'
-+
-+# Version information for $libname.
-+current=$current
-+age=$age
-+revision=$revision
-+
-+# Is this an already installed library?
-+installed=$installed
-+
-+# Directory that this library needs to be installed in:
-+libdir='$install_libdir'\
-+"
-+       done
-+      fi
-+
-+      # Do a symbolic link so that the libtool archive can be found in
-+      # LD_LIBRARY_PATH before the program is installed.
-+      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
-+      $run eval "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" || exit $?
-+      ;;
-+    esac
-+    exit 0
-+    ;;
-+
-+  # libtool install mode
-+  install)
-+    modename="$modename: install"
-+
-+    # There may be an optional sh(1) argument at the beginning of
-+    # install_prog (especially on Windows NT).
-+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh; then
-+      # Aesthetically quote it.
-+      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
-+      case "$arg" in
-+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \    ]*|*]*)
-+       arg="\"$arg\""
-+       ;;
-+      esac
-+      install_prog="$arg "
-+      arg="$1"
-+      shift
-+    else
-+      install_prog=
-+      arg="$nonopt"
-+    fi
-+
-+    # The real first argument should be the name of the installation program.
-+    # Aesthetically quote it.
-+    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-+    case "$arg" in
-+    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \      ]*|*]*)
-+      arg="\"$arg\""
-+      ;;
-+    esac
-+    install_prog="$install_prog$arg"
-+
-+    # We need to accept at least all the BSD install flags.
-+    dest=
-+    files=
-+    opts=
-+    prev=
-+    install_type=
-+    isdir=no
-+    stripme=
-+    for arg
-+    do
-+      if test -n "$dest"; then
-+       files="$files $dest"
-+       dest="$arg"
-+       continue
-+      fi
-+
-+      case "$arg" in
-+      -d) isdir=yes ;;
-+      -f) prev="-f" ;;
-+      -g) prev="-g" ;;
-+      -m) prev="-m" ;;
-+      -o) prev="-o" ;;
-+      -s)
-+       stripme=" -s"
-+       continue
-+       ;;
-+      -*) ;;
-+
-+      *)
-+       # If the previous option needed an argument, then skip it.
-+       if test -n "$prev"; then
-+         prev=
-+       else
-+         dest="$arg"
-+         continue
-+       fi
-+       ;;
-+      esac
-+
-+      # Aesthetically quote the argument.
-+      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-+      case "$arg" in
-+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \    ]*|*]*)
-+       arg="\"$arg\""
-+       ;;
-+      esac
-+      install_prog="$install_prog $arg"
-+    done
-+
-+    if test -z "$install_prog"; then
-+      $echo "$modename: you must specify an install program" 1>&2
-+      $echo "$help" 1>&2
-+      exit 1
-+    fi
-+
-+    if test -n "$prev"; then
-+      $echo "$modename: the \`$prev' option requires an argument" 1>&2
-+      $echo "$help" 1>&2
-+      exit 1
-+    fi
-+
-+    if test -z "$files"; then
-+      if test -z "$dest"; then
-+       $echo "$modename: no file or destination specified" 1>&2
-+      else
-+       $echo "$modename: you must specify a destination" 1>&2
-+      fi
-+      $echo "$help" 1>&2
-+      exit 1
-+    fi
-+
-+    # Strip any trailing slash from the destination.
-+    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-+
-+    # Check to see that the destination is a directory.
-+    test -d "$dest" && isdir=yes
-+    if test "$isdir" = yes; then
-+      destdir="$dest"
-+      destname=
-+    else
-+      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
-+      test "X$destdir" = "X$dest" && destdir=.
-+      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-+
-+      # Not a directory, so check to see that there is only one file specified.
-+      set dummy $files
-+      if test $# -gt 2; then
-+       $echo "$modename: \`$dest' is not a directory" 1>&2
-+       $echo "$help" 1>&2
-+       exit 1
-+      fi
-+    fi
-+    case "$destdir" in
-+    [\\/]* | [A-Za-z]:[\\/]*) ;;
-+    *)
-+      for file in $files; do
-+       case "$file" in
-+       *.lo) ;;
-+       *)
-+         $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
-+         $echo "$help" 1>&2
-+         exit 1
-+         ;;
-+       esac
-+      done
-+      ;;
-+    esac
-+
-+    # This variable tells wrapper scripts just to set variables rather
-+    # than running their programs.
-+    libtool_install_magic="$magic"
-+
-+    staticlibs=
-+    future_libdirs=
-+    current_libdirs=
-+    for file in $files; do
-+
-+      # Do each installation.
-+      case "$file" in
-+      *.a | *.lib)
-+       # Do the static libraries later.
-+       staticlibs="$staticlibs $file"
-+       ;;
-+
-+      *.la)
-+       # Check to see that this really is a libtool archive.
-+       if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-+       else
-+         $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
-+         $echo "$help" 1>&2
-+         exit 1
-+       fi
-+
-+       library_names=
-+       old_library=
-+       # If there is no directory component, then add one.
-+       case "$file" in
-+       */* | *\\*) . $file ;;
-+       *) . ./$file ;;
-+       esac
-+
-+       # Add the libdir to current_libdirs if it is the destination.
-+       if test "X$destdir" = "X$libdir"; then
-+         case "$current_libdirs " in
-+         *" $libdir "*) ;;
-+         *) current_libdirs="$current_libdirs $libdir" ;;
-+         esac
-+       else
-+         # Note the libdir as a future libdir.
-+         case "$future_libdirs " in
-+         *" $libdir "*) ;;
-+         *) future_libdirs="$future_libdirs $libdir" ;;
-+         esac
-+       fi
-+
-+       dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/"
-+       test "X$dir" = "X$file/" && dir=
-+       dir="$dir$objdir"
-+
-+       # See the names of the shared library.
-+       set dummy $library_names
-+       if test -n "$2"; then
-+         realname="$2"
-+         shift
-+         shift
-+
-+         # Install the shared library and build the symlinks.
-+         $show "$install_prog$stripme $dir/$realname $destdir/$realname"
-+         $run eval "$install_prog$stripme $dir/$realname $destdir/$realname" || exit $?
-+
-+         if test $# -gt 0; then
-+           # Delete the old symlinks, and create new ones.
-+           for linkname
-+           do
-+             if test "$linkname" != "$realname"; then
-+               $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
-+               $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
-+             fi
-+           done
-+         fi
-+
-+         # Do each command in the postinstall commands.
-+         lib="$destdir/$realname"
-+         eval cmds=\"$postinstall_cmds\"
-+         IFS="${IFS=   }"; save_ifs="$IFS"; IFS='~'
-+         for cmd in $cmds; do
-+           IFS="$save_ifs"
-+           $show "$cmd"
-+           $run eval "$cmd" || exit $?
-+         done
-+         IFS="$save_ifs"
-+       fi
-+
-+       # Install the pseudo-library for information purposes.
-+       name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-+       instname="$dir/$name"i
-+       $show "$install_prog $instname $destdir/$name"
-+       $run eval "$install_prog $instname $destdir/$name" || exit $?
-+
-+       # Maybe install the static library, too.
-+       test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
-+       ;;
-+
-+      *.lo)
-+       # Install (i.e. copy) a libtool object.
-+
-+       # Figure out destination file name, if it wasn't already specified.
-+       if test -n "$destname"; then
-+         destfile="$destdir/$destname"
-+       else
-+         destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-+         destfile="$destdir/$destfile"
-+       fi
-+
-+       # Deduce the name of the destination old-style object file.
-+       case "$destfile" in
-+       *.lo)
-+         staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
-+         ;;
-+       *.o | *.obj)
-+         staticdest="$destfile"
-+         destfile=
-+         ;;
-+       *)
-+         $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
-+         $echo "$help" 1>&2
-+         exit 1
-+         ;;
-+       esac
-+
-+       # Install the libtool object if requested.
-+       if test -n "$destfile"; then
-+         $show "$install_prog $file $destfile"
-+         $run eval "$install_prog $file $destfile" || exit $?
-+       fi
-+
-+       # Install the old object if enabled.
-+       if test "$build_old_libs" = yes; then
-+         # Deduce the name of the old-style object file.
-+         staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-+
-+         $show "$install_prog $staticobj $staticdest"
-+         $run eval "$install_prog \$staticobj \$staticdest" || exit $?
-+       fi
-+       exit 0
-+       ;;
-+
-+      *)
-+       # Figure out destination file name, if it wasn't already specified.
-+       if test -n "$destname"; then
-+         destfile="$destdir/$destname"
-+       else
-+         destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-+         destfile="$destdir/$destfile"
-+       fi
-+
-+       # Do a test to see if this is really a libtool program.
-+       if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-+         link_against_libtool_libs=
-+         relink_command=
-+
-+         # If there is no directory component, then add one.
-+         case "$file" in
-+         */* | *\\*) . $file ;;
-+         *) . ./$file ;;
-+         esac
-+
-+         # Check the variables that should have been set.
-+         if test -z "$link_against_libtool_libs"; then
-+           $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
-+           exit 1
-+         fi
-+
-+         finalize=yes
-+         for lib in $link_against_libtool_libs; do
-+           # Check to see that each library is installed.
-+           libdir=
-+           if test -f "$lib"; then
-+             # If there is no directory component, then add one.
-+             case "$lib" in
-+             */* | *\\*) . $lib ;;
-+             *) . ./$lib ;;
-+             esac
-+           fi
-+           libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`"
-+           if test -n "$libdir" && test ! -f "$libfile"; then
-+             $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
-+             finalize=no
-+           fi
-+         done
-+
-+         outputname=
-+         if test "$fast_install" = no && test -n "$relink_command"; then
-+           if test "$finalize" = yes && test -z "$run"; then
-+             tmpdir="/tmp"
-+             test -n "$TMPDIR" && tmpdir="$TMPDIR"
-+             tmpdir="$tmpdir/libtool-$$"
-+             if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
-+             else
-+               $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
-+               continue
-+             fi
-+             outputname="$tmpdir/$file"
-+             # Replace the output file specification.
-+             relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
-+
-+             $show "$relink_command"
-+             if $run eval "$relink_command"; then :
-+             else
-+               $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-+               ${rm}r "$tmpdir"
-+               continue
-+             fi
-+             file="$outputname"
-+           else
-+             $echo "$modename: warning: cannot relink \`$file'" 1>&2
-+           fi
-+         else
-+           # Install the binary that we compiled earlier.
-+           file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
-+         fi
-+       fi
-+
-+       $show "$install_prog$stripme $file $destfile"
-+       $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
-+       test -n "$outputname" && ${rm}r "$tmpdir"
-+       ;;
-+      esac
-+    done
-+
-+    for file in $staticlibs; do
-+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-+
-+      # Set up the ranlib parameters.
-+      oldlib="$destdir/$name"
-+
-+      $show "$install_prog $file $oldlib"
-+      $run eval "$install_prog \$file \$oldlib" || exit $?
-+
-+      # Do each command in the postinstall commands.
-+      eval cmds=\"$old_postinstall_cmds\"
-+      IFS="${IFS=      }"; save_ifs="$IFS"; IFS='~'
-+      for cmd in $cmds; do
-+       IFS="$save_ifs"
-+       $show "$cmd"
-+       $run eval "$cmd" || exit $?
-+      done
-+      IFS="$save_ifs"
-+    done
-+
-+    if test -n "$future_libdirs"; then
-+      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
-+    fi
-+
-+    if test -n "$current_libdirs"; then
-+      # Maybe just do a dry run.
-+      test -n "$run" && current_libdirs=" -n$current_libdirs"
-+      exec $SHELL $0 --finish$current_libdirs
-+      exit 1
-+    fi
-+
-+    exit 0
-+    ;;
-+
-+  # libtool finish mode
-+  finish)
-+    modename="$modename: finish"
-+    libdirs="$nonopt"
-+    admincmds=
-+
-+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-+      for dir
-+      do
-+       libdirs="$libdirs $dir"
-+      done
-+
-+      for libdir in $libdirs; do
-+       if test -n "$finish_cmds"; then
-+         # Do each command in the finish commands.
-+         eval cmds=\"$finish_cmds\"
-+         IFS="${IFS=   }"; save_ifs="$IFS"; IFS='~'
-+         for cmd in $cmds; do
-+           IFS="$save_ifs"
-+           $show "$cmd"
-+           $run eval "$cmd" || admincmds="$admincmds
-+       $cmd"
-+         done
-+         IFS="$save_ifs"
-+       fi
-+       if test -n "$finish_eval"; then
-+         # Do the single finish_eval.
-+         eval cmds=\"$finish_eval\"
-+         $run eval "$cmds" || admincmds="$admincmds
-+       $cmds"
-+       fi
-+      done
-+    fi
-+
-+    # Exit here if they wanted silent mode.
-+    test "$show" = : && exit 0
-+
-+    echo "----------------------------------------------------------------------"
-+    echo "Libraries have been installed in:"
-+    for libdir in $libdirs; do
-+      echo "   $libdir"
-+    done
-+    echo
-+    echo "If you ever happen to want to link against installed libraries"
-+    echo "in a given directory, LIBDIR, you must either use libtool, and"
-+    echo "specify the full pathname of the library, or use \`-LLIBDIR'"
-+    echo "flag during linking and do at least one of the following:"
-+    if test -n "$shlibpath_var"; then
-+      echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-+      echo "     during execution"
-+    fi
-+    if test -n "$runpath_var"; then
-+      echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-+      echo "     during linking"
-+    fi
-+    if test -n "$hardcode_libdir_flag_spec"; then
-+      libdir=LIBDIR
-+      eval flag=\"$hardcode_libdir_flag_spec\"
-+
-+      echo "   - use the \`$flag' linker flag"
-+    fi
-+    if test -n "$admincmds"; then
-+      echo "   - have your system administrator run these commands:$admincmds"
-+    fi
-+    if test -f /etc/ld.so.conf; then
-+      echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-+    fi
-+    echo
-+    echo "See any operating system documentation about shared libraries for"
-+    echo "more information, such as the ld(1) and ld.so(8) manual pages."
-+    echo "----------------------------------------------------------------------"
-+    exit 0
-+    ;;
-+
-+  # libtool execute mode
-+  execute)
-+    modename="$modename: execute"
-+
-+    # The first argument is the command name.
-+    cmd="$nonopt"
-+    if test -z "$cmd"; then
-+      $echo "$modename: you must specify a COMMAND" 1>&2
-+      $echo "$help"
-+      exit 1
-+    fi
-+
-+    # Handle -dlopen flags immediately.
-+    for file in $execute_dlfiles; do
-+      if test ! -f "$file"; then
-+       $echo "$modename: \`$file' is not a file" 1>&2
-+       $echo "$help" 1>&2
-+       exit 1
-+      fi
-+
-+      dir=
-+      case "$file" in
-+      *.la)
-+       # Check to see that this really is a libtool archive.
-+       if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-+       else
-+         $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-+         $echo "$help" 1>&2
-+         exit 1
-+       fi
-+
-+       # Read the libtool library.
-+       dlname=
-+       library_names=
-+
-+       # If there is no directory component, then add one.
-+       case "$file" in
-+       */* | *\\*) . $file ;;
-+       *) . ./$file ;;
-+       esac
-+
-+       # Skip this library if it cannot be dlopened.
-+       if test -z "$dlname"; then
-+         # Warn if it was a shared library.
-+         test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
-+         continue
-+       fi
-+
-+       dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-+       test "X$dir" = "X$file" && dir=.
-+
-+       if test -f "$dir/$objdir/$dlname"; then
-+         dir="$dir/$objdir"
-+       else
-+         $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
-+         exit 1
-+       fi
-+       ;;
-+
-+      *.lo)
-+       # Just add the directory containing the .lo file.
-+       dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-+       test "X$dir" = "X$file" && dir=.
-+       ;;
-+
-+      *)
-+       $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
-+       continue
-+       ;;
-+      esac
-+
-+      # Get the absolute pathname.
-+      absdir=`cd "$dir" && pwd`
-+      test -n "$absdir" && dir="$absdir"
-+
-+      # Now add the directory to shlibpath_var.
-+      if eval "test -z \"\$$shlibpath_var\""; then
-+       eval "$shlibpath_var=\"\$dir\""
-+      else
-+       eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
-+      fi
-+    done
-+
-+    # This variable tells wrapper scripts just to set shlibpath_var
-+    # rather than running their programs.
-+    libtool_execute_magic="$magic"
-+
-+    # Check if any of the arguments is a wrapper script.
-+    args=
-+    for file
-+    do
-+      case "$file" in
-+      -*) ;;
-+      *)
-+       # Do a test to see if this is really a libtool program.
-+       if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-+         # If there is no directory component, then add one.
-+         case "$file" in
-+         */* | *\\*) . $file ;;
-+         *) . ./$file ;;
-+         esac
-+
-+         # Transform arg to wrapped name.
-+         file="$progdir/$program"
-+       fi
-+       ;;
-+      esac
-+      # Quote arguments (to preserve shell metacharacters).
-+      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
-+      args="$args \"$file\""
-+    done
-+
-+    if test -z "$run"; then
-+      # Export the shlibpath_var.
-+      eval "export $shlibpath_var"
-+
-+      # Restore saved enviroment variables
-+      if test "${save_LC_ALL+set}" = set; then
-+       LC_ALL="$save_LC_ALL"; export LC_ALL
-+      fi
-+      if test "${save_LANG+set}" = set; then
-+       LANG="$save_LANG"; export LANG
-+      fi
-+
-+      # Now actually exec the command.
-+      eval "exec \$cmd$args"
-+
-+      $echo "$modename: cannot exec \$cmd$args"
-+      exit 1
-+    else
-+      # Display what would be done.
-+      eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
-+      $echo "export $shlibpath_var"
-+      $echo "$cmd$args"
-+      exit 0
-+    fi
-+    ;;
-+
-+  # libtool uninstall mode
-+  uninstall)
-+    modename="$modename: uninstall"
-+    rm="$nonopt"
-+    files=
-+
-+    for arg
-+    do
-+      case "$arg" in
-+      -*) rm="$rm $arg" ;;
-+      *) files="$files $arg" ;;
-+      esac
-+    done
-+
-+    if test -z "$rm"; then
-+      $echo "$modename: you must specify an RM program" 1>&2
-+      $echo "$help" 1>&2
-+      exit 1
-+    fi
-+
-+    for file in $files; do
-+      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-+      test "X$dir" = "X$file" && dir=.
-+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-+
-+      rmfiles="$file"
-+
-+      case "$name" in
-+      *.la)
-+       # Possibly a libtool archive, so verify it.
-+       if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-+         . $dir/$name
-+
-+         # Delete the libtool libraries and symlinks.
-+         for n in $library_names; do
-+           rmfiles="$rmfiles $dir/$n"
-+         done
-+         test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library"
-+
-+         $show "$rm $rmfiles"
-+         $run $rm $rmfiles
-+
-+         if test -n "$library_names"; then
-+           # Do each command in the postuninstall commands.
-+           eval cmds=\"$postuninstall_cmds\"
-+           IFS="${IFS=         }"; save_ifs="$IFS"; IFS='~'
-+           for cmd in $cmds; do
-+             IFS="$save_ifs"
-+             $show "$cmd"
-+             $run eval "$cmd"
-+           done
-+           IFS="$save_ifs"
-+         fi
-+
-+         if test -n "$old_library"; then
-+           # Do each command in the old_postuninstall commands.
-+           eval cmds=\"$old_postuninstall_cmds\"
-+           IFS="${IFS=         }"; save_ifs="$IFS"; IFS='~'
-+           for cmd in $cmds; do
-+             IFS="$save_ifs"
-+             $show "$cmd"
-+             $run eval "$cmd"
-+           done
-+           IFS="$save_ifs"
-+         fi
-+
-+         # FIXME: should reinstall the best remaining shared library.
-+       fi
-+       ;;
-+
-+      *.lo)
-+       if test "$build_old_libs" = yes; then
-+         oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
-+         rmfiles="$rmfiles $dir/$oldobj"
-+       fi
-+       $show "$rm $rmfiles"
-+       $run $rm $rmfiles
-+       ;;
-+
-+      *)
-+       $show "$rm $rmfiles"
-+       $run $rm $rmfiles
-+       ;;
-+      esac
-+    done
-+    exit 0
-+    ;;
-+
-+  "")
-+    $echo "$modename: you must specify a MODE" 1>&2
-+    $echo "$generic_help" 1>&2
-+    exit 1
-+    ;;
-+  esac
-+
-+  $echo "$modename: invalid operation mode \`$mode'" 1>&2
-+  $echo "$generic_help" 1>&2
-+  exit 1
-+fi # test -z "$show_help"
-+
-+# We need to display help for each of the modes.
-+case "$mode" in
-+"") $echo \
-+"Usage: $modename [OPTION]... [MODE-ARG]...
-+
-+Provide generalized library-building support services.
-+
-+    --config          show all configuration variables
-+    --debug           enable verbose shell tracing
-+-n, --dry-run         display commands without modifying any files
-+    --features        display basic configuration information and exit
-+    --finish          same as \`--mode=finish'
-+    --help            display this help message and exit
-+    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
-+    --quiet           same as \`--silent'
-+    --silent          don't print informational messages
-+    --version         print version information
-+
-+MODE must be one of the following:
-+
-+      compile         compile a source file into a libtool object
-+      execute         automatically set library path, then run a program
-+      finish          complete the installation of libtool libraries
-+      install         install libraries or executables
-+      link            create a library or an executable
-+      uninstall       remove libraries from an installed directory
-+
-+MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
-+a more detailed description of MODE."
-+  exit 0
-+  ;;
-+
-+compile)
-+  $echo \
-+"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-+
-+Compile a source file into a libtool library object.
-+
-+This mode accepts the following additional options:
-+
-+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
-+  -static           always build a \`.o' file suitable for static linking
-+
-+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-+from the given SOURCEFILE.
-+
-+The output file name is determined by removing the directory component from
-+SOURCEFILE, then substituting the C source code suffix \`.c' with the
-+library object suffix, \`.lo'."
-+  ;;
-+
-+execute)
-+  $echo \
-+"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-+
-+Automatically set library path, then run a program.
-+
-+This mode accepts the following additional options:
-+
-+  -dlopen FILE      add the directory containing FILE to the library path
-+
-+This mode sets the library path environment variable according to \`-dlopen'
-+flags.
-+
-+If any of the ARGS are libtool executable wrappers, then they are translated
-+into their corresponding uninstalled binary, and any of their required library
-+directories are added to the library path.
-+
-+Then, COMMAND is executed, with ARGS as arguments."
-+  ;;
-+
-+finish)
-+  $echo \
-+"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-+
-+Complete the installation of libtool libraries.
-+
-+Each LIBDIR is a directory that contains libtool libraries.
-+
-+The commands that this mode executes may require superuser privileges.  Use
-+the \`--dry-run' option if you just want to see what would be executed."
-+  ;;
-+
-+install)
-+  $echo \
-+"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-+
-+Install executables or libraries.
-+
-+INSTALL-COMMAND is the installation command.  The first component should be
-+either the \`install' or \`cp' program.
-+
-+The rest of the components are interpreted as arguments to that command (only
-+BSD-compatible install options are recognized)."
-+  ;;
-+
-+link)
-+  $echo \
-+"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-+
-+Link object files or libraries together to form another library, or to
-+create an executable program.
-+
-+LINK-COMMAND is a command using the C compiler that you would use to create
-+a program from several object files.
-+
-+The following components of LINK-COMMAND are treated specially:
-+
-+  -all-static       do not do any dynamic linking at all
-+  -avoid-version    do not add a version suffix if possible
-+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
-+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
-+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-+  -export-symbols SYMFILE
-+                   try to export only the symbols listed in SYMFILE
-+  -export-symbols-regex REGEX
-+                   try to export only the symbols matching REGEX
-+  -LLIBDIR          search LIBDIR for required installed libraries
-+  -lNAME            OUTPUT-FILE requires the installed library libNAME
-+  -module           build a library that can dlopened
-+  -no-undefined     declare that a library does not refer to external symbols
-+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-+  -release RELEASE  specify package release information
-+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
-+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-+  -static           do not do any dynamic linking of libtool libraries
-+  -version-info CURRENT[:REVISION[:AGE]]
-+                   specify library version info [each variable defaults to 0]
-+
-+All other options (arguments beginning with \`-') are ignored.
-+
-+Every other argument is treated as a filename.  Files ending in \`.la' are
-+treated as uninstalled libtool libraries, other files are standard or library
-+object files.
-+
-+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-+only library objects (\`.lo' files) may be specified, and \`-rpath' is
-+required, except when creating a convenience library.
-+
-+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-+using \`ar' and \`ranlib', or on Windows using \`lib'.
-+
-+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-+is created, otherwise an executable program is created."
-+  ;;
-+
-+uninstall)
-+  $echo \
-+"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-+
-+Remove libraries from an installation directory.
-+
-+RM is the name of the program to use to delete files associated with each FILE
-+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-+to RM.
-+
-+If FILE is a libtool library, all the files associated with it are deleted.
-+Otherwise, only FILE itself is deleted using RM."
-+  ;;
-+
-+*)
-+  $echo "$modename: invalid operation mode \`$mode'" 1>&2
-+  $echo "$help" 1>&2
-+  exit 1
-+  ;;
-+esac
-+
-+echo
-+$echo "Try \`$modename --help' for more information about other modes."
-+
-+exit 0
-+
-+# Local Variables:
-+# mode:shell-script
-+# sh-indentation:2
-+# End:
 --- /dev/null
 +++ jpeg-6b/testimg.uu
 @@ -0,0 +1,873 @@
@@ -6993,3022 +2752,3 @@
 +JVO-KSZ\]>_;LV;-G#[X!?RY<N/!GP"]\:_#ARS+@SQ%@`WZM6;,F(``[
 +`
 +end
---- /dev/null
-+++ jpeg-6b/ltconfig.new
-@@ -0,0 +1,3016 @@
-+#! /bin/sh
-+
-+# ltconfig - Create a system-specific libtool.
-+# Copyright (C) 1996-1999 Free Software Foundation, Inc.
-+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-+#
-+# This file is free software; you can redistribute it and/or modify it
-+# under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2 of the License, or
-+# (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful, but
-+# WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+# General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+#
-+# As a special exception to the GNU General Public License, if you
-+# distribute this file as part of a program that contains a
-+# configuration script generated by Autoconf, you may include it under
-+# the same distribution terms that you use for the rest of that program.
-+
-+# A lot of this script is taken from autoconf-2.10.
-+
-+# Check that we are running under the correct shell.
-+SHELL=${CONFIG_SHELL-/bin/sh}
-+echo=echo
-+if test "X$1" = X--no-reexec; then
-+  # Discard the --no-reexec flag, and continue.
-+  shift
-+elif test "X$1" = X--fallback-echo; then
-+  # Avoid inline document here, it may be left over
-+  :
-+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-+  # Yippee, $echo works!
-+  :
-+else
-+  # Restart under the correct shell.
-+  exec "$SHELL" "$0" --no-reexec ${1+"$@"}
-+fi
-+
-+if test "X$1" = X--fallback-echo; then
-+  # used as fallback echo
-+  shift
-+  cat <<EOF
-+$*
-+EOF
-+  exit 0
-+fi
-+
-+# Find the correct PATH separator.  Usually this is `:', but
-+# DJGPP uses `;' like DOS.
-+if test "X${PATH_SEPARATOR+set}" != "Xset"; then
-+  UNAME=${UNAME-`uname 2>/dev/null`}
-+  case X$UNAME in
-+    *-DOS) PATH_SEPARATOR=';' ;;
-+    *)     PATH_SEPARATOR=':' ;;
-+  esac
-+fi
-+
-+# The HP-UX ksh and POSIX shell print the target directory to stdout
-+# if CDPATH is set.
-+if test "${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi
-+
-+if test "X${echo_test_string+set}" != "Xset"; then
-+  # find a string as large as possible, as long as the shell can cope with it
-+  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
-+    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-+    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-+       echo_test_string="`eval $cmd`" &&
-+       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null; then
-+      break
-+    fi
-+  done
-+fi
-+
-+if test "X`($echo '\t') 2>/dev/null`" != 'X\t' ||
-+   test "X`($echo "$echo_test_string") 2>/dev/null`" != X"$echo_test_string"; then
-+  # The Solaris, AIX, and Digital Unix default echo programs unquote
-+  # backslashes.  This makes it impossible to quote backslashes using
-+  #   echo "$something" | sed 's/\\/\\\\/g'
-+  #
-+  # So, first we look for a working echo in the user's PATH.
-+
-+  IFS="${IFS=  }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
-+  for dir in $PATH /usr/ucb; do
-+    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-+       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-+       test "X`($dir/echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
-+      echo="$dir/echo"
-+      break
-+    fi
-+  done
-+  IFS="$save_ifs"
-+
-+  if test "X$echo" = Xecho; then
-+    # We didn't find a better echo, so look for alternatives.
-+    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-+       test "X`(print -r "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
-+      # This shell has a builtin print -r that does the trick.
-+      echo='print -r'
-+    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-+        test "X$CONFIG_SHELL" != X/bin/ksh; then
-+      # If we have ksh, try running ltconfig again with it.
-+      ORIGINAL_CONFIG_SHELL="${CONFIG_SHELL-/bin/sh}"
-+      export ORIGINAL_CONFIG_SHELL
-+      CONFIG_SHELL=/bin/ksh
-+      export CONFIG_SHELL
-+      exec "$CONFIG_SHELL" "$0" --no-reexec ${1+"$@"}
-+    else
-+      # Try using printf.
-+      echo='printf "%s\n"'
-+      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-+        test "X`($echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
-+       # Cool, printf works
-+       :
-+      elif test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' &&
-+          test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
-+       CONFIG_SHELL="$ORIGINAL_CONFIG_SHELL"
-+       export CONFIG_SHELL
-+       SHELL="$CONFIG_SHELL"
-+       export SHELL
-+       echo="$CONFIG_SHELL $0 --fallback-echo"
-+      elif test "X`("$CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' &&
-+          test "X`("$CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
-+       echo="$CONFIG_SHELL $0 --fallback-echo"
-+      else
-+       # maybe with a smaller string...
-+       prev=:
-+
-+       for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
-+         if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null; then
-+           break
-+         fi
-+         prev="$cmd"
-+       done
-+
-+       if test "$prev" != 'sed 50q "$0"'; then
-+         echo_test_string=`eval $prev`
-+         export echo_test_string
-+         exec "${ORIGINAL_CONFIG_SHELL}" "$0" ${1+"$@"}
-+       else
-+         # Oops.  We lost completely, so just stick with echo.
-+         echo=echo
-+       fi
-+      fi
-+    fi
-+  fi
-+fi
-+
-+# Sed substitution that helps us do robust quoting.  It backslashifies
-+# metacharacters that are still active within double-quoted strings.
-+Xsed='sed -e s/^X//'
-+sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
-+
-+# Same as above, but do not quote variable references.
-+double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
-+
-+# Sed substitution to delay expansion of an escaped shell variable in a
-+# double_quote_subst'ed string.
-+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-+
-+# The name of this program.
-+progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'`
-+
-+# Constants:
-+PROGRAM=ltconfig
-+PACKAGE=libtool
-+VERSION=1.3.3
-+TIMESTAMP=" (1.385.2.181 1999/07/02 15:49:11)"
-+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.c 1>&5'
-+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.c $LIBS 1>&5'
-+rm="rm -f"
-+
-+help="Try \`$progname --help' for more information."
-+
-+# Global variables:
-+default_ofile=libtool
-+can_build_shared=yes
-+enable_shared=yes
-+# All known linkers require a `.a' archive for static linking (except M$VC,
-+# which needs '.lib').
-+enable_static=yes
-+enable_fast_install=yes
-+enable_dlopen=unknown
-+enable_win32_dll=no
-+ltmain=
-+silent=
-+srcdir=
-+ac_config_guess=
-+ac_config_sub=
-+host=
-+nonopt=
-+ofile="$default_ofile"
-+verify_host=yes
-+with_gcc=no
-+with_gnu_ld=no
-+need_locks=yes
-+ac_ext=c
-+objext=o
-+libext=a
-+exeext=
-+cache_file=
-+
-+old_AR="$AR"
-+old_CC="$CC"
-+old_CFLAGS="$CFLAGS"
-+old_CPPFLAGS="$CPPFLAGS"
-+old_LDFLAGS="$LDFLAGS"
-+old_LD="$LD"
-+old_LN_S="$LN_S"
-+old_LIBS="$LIBS"
-+old_NM="$NM"
-+old_RANLIB="$RANLIB"
-+old_DLLTOOL="$DLLTOOL"
-+old_OBJDUMP="$OBJDUMP"
-+old_AS="$AS"
-+
-+# Parse the command line options.
-+args=
-+prev=
-+for option
-+do
-+  case "$option" in
-+  -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-+  *) optarg= ;;
-+  esac
-+
-+  # If the previous option needs an argument, assign it.
-+  if test -n "$prev"; then
-+    eval "$prev=\$option"
-+    prev=
-+    continue
-+  fi
-+
-+  case "$option" in
-+  --help) cat <<EOM
-+Usage: $progname [OPTION]... [HOST [LTMAIN]]
-+
-+Generate a system-specific libtool script.
-+
-+    --debug                enable verbose shell tracing
-+    --disable-shared       do not build shared libraries
-+    --disable-static       do not build static libraries
-+    --disable-fast-install do not optimize for fast installation
-+    --enable-dlopen        enable dlopen support
-+    --enable-win32-dll     enable building dlls on win32 hosts
-+    --help                 display this help and exit
-+    --no-verify            do not verify that HOST is a valid host type
-+-o, --output=FILE          specify the output file [default=$default_ofile]
-+    --quiet                same as \`--silent'
-+    --silent               do not print informational messages
-+    --srcdir=DIR           find \`config.guess' in DIR
-+    --version              output version information and exit
-+    --with-gcc             assume that the GNU C compiler will be used
-+    --with-gnu-ld          assume that the C compiler uses the GNU linker
-+    --disable-lock         disable file locking
-+    --cache-file=FILE      configure cache file
-+
-+LTMAIN is the \`ltmain.sh' shell script fragment or \`ltmain.c' program
-+that provides basic libtool functionality.
-+
-+HOST is the canonical host system name [default=guessed].
-+EOM
-+  exit 0
-+  ;;
-+
-+  --debug)
-+    echo "$progname: enabling shell trace mode"
-+    set -x
-+    ;;
-+
-+  --disable-shared) enable_shared=no ;;
-+
-+  --disable-static) enable_static=no ;;
-+
-+  --disable-fast-install) enable_fast_install=no ;;
-+
-+  --enable-dlopen) enable_dlopen=yes ;;
-+
-+  --enable-win32-dll) enable_win32_dll=yes ;;
-+
-+  --quiet | --silent) silent=yes ;;
-+
-+  --srcdir) prev=srcdir ;;
-+  --srcdir=*) srcdir="$optarg" ;;
-+
-+  --no-verify) verify_host=no ;;
-+
-+  --output | -o) prev=ofile ;;
-+  --output=*) ofile="$optarg" ;;
-+
-+  --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"; exit 0 ;;
-+
-+  --with-gcc) with_gcc=yes ;;
-+  --with-gnu-ld) with_gnu_ld=yes ;;
-+
-+  --disable-lock) need_locks=no ;;
-+
-+  --cache-file=*) cache_file="$optarg" ;;
-+
-+  -*)
-+    echo "$progname: unrecognized option \`$option'" 1>&2
-+    echo "$help" 1>&2
-+    exit 1
-+    ;;
-+
-+  *)
-+    if test -z "$ltmain"; then
-+      ltmain="$option"
-+    elif test -z "$host"; then
-+# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1
-+#      if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then
-+#        echo "$progname: warning \`$option' is not a valid host type" 1>&2
-+#      fi
-+      host="$option"
-+    else
-+      echo "$progname: too many arguments" 1>&2
-+      echo "$help" 1>&2
-+      exit 1
-+    fi ;;
-+  esac
-+done
-+
-+if test -z "$ltmain"; then
-+  echo "$progname: you must specify a LTMAIN file" 1>&2
-+  echo "$help" 1>&2
-+  exit 1
-+fi
-+
-+if test ! -f "$ltmain"; then
-+  echo "$progname: \`$ltmain' does not exist" 1>&2
-+  echo "$help" 1>&2
-+  exit 1
-+fi
-+
-+# Quote any args containing shell metacharacters.
-+ltconfig_args=
-+for arg
-+do
-+  case "$arg" in
-+  *" "*|*"     "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-+  ltconfig_args="$ltconfig_args '$arg'" ;;
-+  *) ltconfig_args="$ltconfig_args $arg" ;;
-+  esac
-+done
-+
-+# A relevant subset of AC_INIT.
-+
-+# File descriptor usage:
-+# 0 standard input
-+# 1 file creation
-+# 2 errors and warnings
-+# 3 some systems may open it to /dev/tty
-+# 4 used on the Kubota Titan
-+# 5 compiler messages saved in config.log
-+# 6 checking for... messages and results
-+if test "$silent" = yes; then
-+  exec 6>/dev/null
-+else
-+  exec 6>&1
-+fi
-+exec 5>>./config.log
-+
-+# NLS nuisances.
-+# Only set LANG and LC_ALL to C if already set.
-+# These must not be set unconditionally because not all systems understand
-+# e.g. LANG=C (notably SCO).
-+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-+
-+if test -n "$cache_file" && test -r "$cache_file"; then
-+  echo "loading cache $cache_file within ltconfig"
-+  . $cache_file
-+fi
-+
-+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-+    ac_n= ac_c='
-+' ac_t='       '
-+  else
-+    ac_n=-n ac_c= ac_t=
-+  fi
-+else
-+  ac_n= ac_c='\c' ac_t=
-+fi
-+
-+if test -z "$srcdir"; then
-+  # Assume the source directory is the same one as the path to LTMAIN.
-+  srcdir=`$echo "X$ltmain" | $Xsed -e 's%/[^/]*$%%'`
-+  test "$srcdir" = "$ltmain" && srcdir=.
-+fi
-+
-+trap "$rm conftest*; exit 1" 1 2 15
-+if test "$verify_host" = yes; then
-+  # Check for config.guess and config.sub.
-+  ac_aux_dir=
-+  for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
-+    if test -f $ac_dir/config.guess; then
-+      ac_aux_dir=$ac_dir
-+      break
-+    fi
-+  done
-+  if test -z "$ac_aux_dir"; then
-+    echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2
-+    echo "$help" 1>&2
-+    exit 1
-+  fi
-+  ac_config_guess=$ac_aux_dir/config.guess
-+  ac_config_sub=$ac_aux_dir/config.sub
-+
-+  # Make sure we can run config.sub.
-+  if $SHELL $ac_config_sub sun4 >/dev/null 2>&1; then :
-+  else
-+    echo "$progname: cannot run $ac_config_sub" 1>&2
-+    echo "$help" 1>&2
-+    exit 1
-+  fi
-+
-+  echo $ac_n "checking host system type""... $ac_c" 1>&6
-+
-+  host_alias=$host
-+  case "$host_alias" in
-+  "")
-+    if host_alias=`$SHELL $ac_config_guess`; then :
-+    else
-+      echo "$progname: cannot guess host type; you must specify one" 1>&2
-+      echo "$help" 1>&2
-+      exit 1
-+    fi ;;
-+  esac
-+  host=`$SHELL $ac_config_sub $host_alias`
-+  echo "$ac_t$host" 1>&6
-+
-+  # Make sure the host verified.
-+  test -z "$host" && exit 1
-+
-+elif test -z "$host"; then
-+  echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2
-+  echo "$help" 1>&2
-+  exit 1
-+else
-+  host_alias=$host
-+fi
-+
-+# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
-+case "$host_os" in
-+linux-gnu*) ;;
-+linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
-+esac
-+
-+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-+
-+case "$host_os" in
-+aix3*)
-+  # AIX sometimes has problems with the GCC collect2 program.  For some
-+  # reason, if we set the COLLECT_NAMES environment variable, the problems
-+  # vanish in a puff of smoke.
-+  if test "${COLLECT_NAMES+set}" != set; then
-+    COLLECT_NAMES=
-+    export COLLECT_NAMES
-+  fi
-+  ;;
-+esac
-+
-+# Determine commands to create old-style static archives.
-+old_archive_cmds='$AR cru $oldlib$oldobjs'
-+old_postinstall_cmds='chmod 644 $oldlib'
-+old_postuninstall_cmds=
-+
-+# Set a sane default for `AR'.
-+test -z "$AR" && AR=ar
-+
-+# Set a sane default for `OBJDUMP'.
-+test -z "$OBJDUMP" && OBJDUMP=objdump
-+
-+# If RANLIB is not set, then run the test.
-+if test "${RANLIB+set}" != "set"; then
-+  result=no
-+
-+  echo $ac_n "checking for ranlib... $ac_c" 1>&6
-+  IFS="${IFS=  }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
-+  for dir in $PATH; do
-+    test -z "$dir" && dir=.
-+    if test -f $dir/ranlib || test -f $dir/ranlib$ac_exeext; then
-+      RANLIB="ranlib"
-+      result="ranlib"
-+      break
-+    fi
-+  done
-+  IFS="$save_ifs"
-+
-+  echo "$ac_t$result" 1>&6
-+fi
-+
-+if test -n "$RANLIB"; then
-+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-+  old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-+fi
-+
-+# Set sane defaults for `DLLTOOL', `OBJDUMP', and `AS', used on cygwin.
-+test -z "$DLLTOOL" && DLLTOOL=dlltool
-+test -z "$OBJDUMP" && OBJDUMP=objdump
-+test -z "$AS" && AS=as
-+
-+# Check to see if we are using GCC.
-+if test "$with_gcc" != yes || test -z "$CC"; then
-+  # If CC is not set, then try to find GCC or a usable CC.
-+  if test -z "$CC"; then
-+    echo $ac_n "checking for gcc... $ac_c" 1>&6
-+    IFS="${IFS=        }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
-+    for dir in $PATH; do
-+      test -z "$dir" && dir=.
-+      if test -f $dir/gcc || test -f $dir/gcc$ac_exeext; then
-+       CC="gcc"
-+       break
-+      fi
-+    done
-+    IFS="$save_ifs"
-+
-+    if test -n "$CC"; then
-+      echo "$ac_t$CC" 1>&6
-+    else
-+      echo "$ac_t"no 1>&6
-+    fi
-+  fi
-+
-+  # Not "gcc", so try "cc", rejecting "/usr/ucb/cc".
-+  if test -z "$CC"; then
-+    echo $ac_n "checking for cc... $ac_c" 1>&6
-+    IFS="${IFS=        }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
-+    cc_rejected=no
-+    for dir in $PATH; do
-+      test -z "$dir" && dir=.
-+      if test -f $dir/cc || test -f $dir/cc$ac_exeext; then
-+       if test "$dir/cc" = "/usr/ucb/cc"; then
-+         cc_rejected=yes
-+         continue
-+       fi
-+       CC="cc"
-+       break
-+      fi
-+    done
-+    IFS="$save_ifs"
-+    if test $cc_rejected = yes; then
-+      # We found a bogon in the path, so make sure we never use it.
-+      set dummy $CC
-+      shift
-+      if test $# -gt 0; then
-+       # We chose a different compiler from the bogus one.
-+       # However, it has the same name, so the bogon will be chosen
-+       # first if we set CC to just the name; use the full file name.
-+       shift
-+       set dummy "$dir/cc" "$@"
-+       shift
-+       CC="$@"
-+      fi
-+    fi
-+
-+    if test -n "$CC"; then
-+      echo "$ac_t$CC" 1>&6
-+    else
-+      echo "$ac_t"no 1>&6
-+    fi
-+
-+    if test -z "$CC"; then
-+      echo "$progname: error: no acceptable cc found in \$PATH" 1>&2
-+      exit 1
-+    fi
-+  fi
-+
-+  # Now see if the compiler is really GCC.
-+  with_gcc=no
-+  echo $ac_n "checking whether we are using GNU C... $ac_c" 1>&6
-+  echo "$progname:581: checking whether we are using GNU C" >&5
-+
-+  $rm conftest.c
-+  cat > conftest.c <<EOF
-+#ifdef __GNUC__
-+  yes;
-+#endif
-+EOF
-+  if { ac_try='${CC-cc} -E conftest.c'; { (eval echo $progname:589: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-+    with_gcc=yes
-+  fi
-+  $rm conftest.c
-+  echo "$ac_t$with_gcc" 1>&6
-+fi
-+
-+# Allow CC to be a program name with arguments.
-+set dummy $CC
-+compiler="$2"
-+
-+echo $ac_n "checking for object suffix... $ac_c" 1>&6
-+$rm conftest*
-+echo 'int i = 1;' > conftest.c
-+echo "$progname:603: checking for object suffix" >& 5
-+if { (eval echo $progname:604: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then
-+  # Append any warnings to the config.log.
-+  cat conftest.err 1>&5
-+
-+  for ac_file in conftest.*; do
-+    case $ac_file in
-+    *.c) ;;
-+    *) objext=`echo $ac_file | sed -e s/conftest.//` ;;
-+    esac
-+  done
-+else
-+  cat conftest.err 1>&5
-+  echo "$progname: failed program was:" >&5
-+  cat conftest.c >&5
-+fi
-+$rm conftest*
-+echo "$ac_t$objext" 1>&6
-+
-+echo $ac_n "checking for executable suffix... $ac_c" 1>&6
-+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-+  echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+  ac_cv_exeext="no"
-+  $rm conftest*
-+  echo 'main () { return 0; }' > conftest.c
-+  echo "$progname:629: checking for executable suffix" >& 5
-+  if { (eval echo $progname:630: \"$ac_link\") 1>&5; (eval $ac_link) 2>conftest.err; }; then
-+    # Append any warnings to the config.log.
-+    cat conftest.err 1>&5
-+
-+    for ac_file in conftest.*; do
-+      case $ac_file in
-+      *.c | *.err | *.$objext ) ;;
-+      *) ac_cv_exeext=.`echo $ac_file | sed -e s/conftest.//` ;;
-+      esac
-+    done
-+  else
-+    cat conftest.err 1>&5
-+    echo "$progname: failed program was:" >&5
-+    cat conftest.c >&5
-+  fi
-+  $rm conftest*
-+fi
-+if test "X$ac_cv_exeext" = Xno; then
-+  exeext=""
-+else
-+  exeext="$ac_cv_exeext"
-+fi
-+echo "$ac_t$ac_cv_exeext" 1>&6
-+
-+echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6
-+pic_flag=
-+special_shlib_compile_flags=
-+wl=
-+link_static_flag=
-+no_builtin_flag=
-+
-+if test "$with_gcc" = yes; then
-+  wl='-Wl,'
-+  link_static_flag='-static'
-+
-+  case "$host_os" in
-+  beos* | irix5* | irix6* | osf3* | osf4*)
-+    # PIC is the default for these OSes.
-+    ;;
-+  aix*)
-+    # Below there is a dirty hack to force normal static linking with -ldl
-+    # The problem is because libdl dynamically linked with both libc and
-+    # libC (AIX C++ library), which obviously doesn't included in libraries
-+    # list by gcc. This cause undefined symbols with -static flags.
-+    # This hack allows C programs to be linked with "-static -ldl", but
-+    # we not sure about C++ programs.
-+    link_static_flag="$link_static_flag ${wl}-lC"
-+    ;;
-+  cygwin* | mingw* | os2*)
-+    # We can build DLLs from non-PIC.
-+    ;;
-+  amigaos*)
-+    # FIXME: we need at least 68020 code to build shared libraries, but
-+    # adding the `-m68020' flag to GCC prevents building anything better,
-+    # like `-m68040'.
-+    pic_flag='-m68020 -resident32 -malways-restore-a4'
-+    ;;
-+  sysv4*MP*)
-+    if test -d /usr/nec; then
-+       pic_flag=-Kconform_pic
-+    fi
-+    ;;
-+  *)
-+    pic_flag='-fPIC'
-+    ;;
-+  esac
-+else
-+  # PORTME Check for PIC flags for the system compiler.
-+  case "$host_os" in
-+  aix3* | aix4*)
-+    # All AIX code is PIC.
-+    link_static_flag='-bnso -bI:/lib/syscalls.exp'
-+    ;;
-+
-+  hpux9* | hpux10* | hpux11*)
-+    # Is there a better link_static_flag that works with the bundled CC?
-+    wl='-Wl,'
-+    link_static_flag="${wl}-a ${wl}archive"
-+    pic_flag='+Z'
-+    ;;
-+
-+  irix5* | irix6*)
-+    wl='-Wl,'
-+    link_static_flag='-non_shared'
-+    # PIC (with -KPIC) is the default.
-+    ;;
-+
-+  cygwin* | mingw* | os2*)
-+    # We can build DLLs from non-PIC.
-+    ;;
-+
-+  osf3* | osf4*)
-+    # All OSF/1 code is PIC.
-+    wl='-Wl,'
-+    link_static_flag='-non_shared'
-+    ;;
-+
-+  sco3.2v5*)
-+    pic_flag='-Kpic'
-+    link_static_flag='-dn'
-+    special_shlib_compile_flags='-belf'
-+    ;;
-+
-+  solaris*)
-+    pic_flag='-KPIC'
-+    link_static_flag='-Bstatic'
-+    wl='-Wl,'
-+    ;;
-+
-+  sunos4*)
-+    pic_flag='-PIC'
-+    link_static_flag='-Bstatic'
-+    wl='-Qoption ld '
-+    ;;
-+
-+  sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-+    pic_flag='-KPIC'
-+    link_static_flag='-Bstatic'
-+    wl='-Wl,'
-+    ;;
-+
-+  uts4*)
-+    pic_flag='-pic'
-+    link_static_flag='-Bstatic'
-+    ;;
-+  sysv4*MP*)
-+    if test -d /usr/nec ;then
-+      pic_flag='-Kconform_pic'
-+      link_static_flag='-Bstatic'
-+    fi
-+    ;;
-+  *)
-+    can_build_shared=no
-+    ;;
-+  esac
-+fi
-+
-+if test -n "$pic_flag"; then
-+  echo "$ac_t$pic_flag" 1>&6
-+
-+  # Check to make sure the pic_flag actually works.
-+  echo $ac_n "checking if $compiler PIC flag $pic_flag works... $ac_c" 1>&6
-+  $rm conftest*
-+  echo "int some_variable = 0;" > conftest.c
-+  save_CFLAGS="$CFLAGS"
-+  CFLAGS="$CFLAGS $pic_flag -DPIC"
-+  echo "$progname:776: checking if $compiler PIC flag $pic_flag works" >&5
-+  if { (eval echo $progname:777: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then
-+    # Append any warnings to the config.log.
-+    cat conftest.err 1>&5
-+    
-+    case "$host_os" in
-+    hpux9* | hpux10* | hpux11*)
-+      # On HP-UX, both CC and GCC only warn that PIC is supported... then they
-+      # create non-PIC objects.  So, if there were any warnings, we assume that
-+      # PIC is not supported.
-+      if test -s conftest.err; then
-+       echo "$ac_t"no 1>&6
-+       can_build_shared=no
-+       pic_flag=
-+      else
-+       echo "$ac_t"yes 1>&6
-+       pic_flag=" $pic_flag"
-+      fi
-+      ;;
-+    *)
-+      echo "$ac_t"yes 1>&6
-+      pic_flag=" $pic_flag"
-+      ;;
-+    esac
-+  else
-+    # Append any errors to the config.log.
-+    cat conftest.err 1>&5
-+    can_build_shared=no
-+    pic_flag=
-+    echo "$ac_t"no 1>&6
-+  fi
-+  CFLAGS="$save_CFLAGS"
-+  $rm conftest*
-+else
-+  echo "$ac_t"none 1>&6
-+fi
-+
-+# Check to see if options -o and -c are simultaneously supported by compiler
-+echo $ac_n "checking if $compiler supports -c -o file.o... $ac_c" 1>&6
-+$rm -r conftest 2>/dev/null
-+mkdir conftest
-+cd conftest
-+$rm conftest*
-+echo "int some_variable = 0;" > conftest.c
-+mkdir out
-+# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-+# that will create temporary files in the current directory regardless of
-+# the output directory.  Thus, making CWD read-only will cause this test
-+# to fail, enabling locking or at least warning the user not to do parallel
-+# builds.
-+chmod -w .
-+save_CFLAGS="$CFLAGS"
-+CFLAGS="$CFLAGS -o out/conftest2.o"
-+echo "$progname:829: checking if $compiler supports -c -o file.o" >&5
-+if { (eval echo $progname:830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.o; then
-+
-+  # The compiler can only warn and ignore the option if not recognized
-+  # So say no if there are warnings
-+    if test -s out/conftest.err; then
-+      echo "$ac_t"no 1>&6
-+      compiler_c_o=no
-+    else
-+      echo "$ac_t"yes 1>&6
-+      compiler_c_o=yes
-+    fi
-+else
-+  # Append any errors to the config.log.
-+  cat out/conftest.err 1>&5
-+  compiler_c_o=no
-+  echo "$ac_t"no 1>&6
-+fi
-+CFLAGS="$save_CFLAGS"
-+chmod u+w .
-+$rm conftest* out/*
-+rmdir out
-+cd ..
-+rmdir conftest
-+$rm -r conftest 2>/dev/null
-+
-+if test x"$compiler_c_o" = x"yes"; then
-+  # Check to see if we can write to a .lo
-+  echo $ac_n "checking if $compiler supports -c -o file.lo... $ac_c" 1>&6
-+  $rm conftest*
-+  echo "int some_variable = 0;" > conftest.c
-+  save_CFLAGS="$CFLAGS"
-+  CFLAGS="$CFLAGS -c -o conftest.lo"
-+  echo "$progname:862: checking if $compiler supports -c -o file.lo" >&5
-+if { (eval echo $progname:863: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.lo; then
-+
-+    # The compiler can only warn and ignore the option if not recognized
-+    # So say no if there are warnings
-+      if test -s conftest.err; then
-+       echo "$ac_t"no 1>&6
-+       compiler_o_lo=no
-+      else
-+       echo "$ac_t"yes 1>&6
-+       compiler_o_lo=yes
-+      fi
-+  else
-+    # Append any errors to the config.log.
-+    cat conftest.err 1>&5
-+    compiler_o_lo=no
-+    echo "$ac_t"no 1>&6
-+  fi
-+  CFLAGS="$save_CFLAGS"
-+  $rm conftest*
-+else
-+  compiler_o_lo=no
-+fi
-+
-+# Check to see if we can do hard links to lock some files if needed
-+hard_links="nottested"
-+if test "$compiler_c_o" = no && test "$need_locks" != no; then
-+  # do not overwrite the value of need_locks provided by the user
-+  echo $ac_n "checking if we can lock with hard links... $ac_c" 1>&6
-+  hard_links=yes
-+  $rm conftest*
-+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+  touch conftest.a
-+  ln conftest.a conftest.b 2>&5 || hard_links=no
-+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+  echo "$ac_t$hard_links" 1>&6
-+  $rm conftest*
-+  if test "$hard_links" = no; then
-+    echo "*** WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2
-+    need_locks=warn
-+  fi
-+else
-+  need_locks=no
-+fi
-+
-+if test "$with_gcc" = yes; then
-+  # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
-+  echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions ... $ac_c" 1>&6
-+  $rm conftest*
-+  echo "int some_variable = 0;" > conftest.c
-+  save_CFLAGS="$CFLAGS"
-+  CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.c"
-+  echo "$progname:914: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-+  if { (eval echo $progname:915: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.o; then
-+
-+    # The compiler can only warn and ignore the option if not recognized
-+    # So say no if there are warnings
-+      if test -s conftest.err; then
-+       echo "$ac_t"no 1>&6
-+       compiler_rtti_exceptions=no
-+      else
-+       echo "$ac_t"yes 1>&6
-+       compiler_rtti_exceptions=yes
-+      fi
-+  else
-+    # Append any errors to the config.log.
-+    cat conftest.err 1>&5
-+    compiler_rtti_exceptions=no
-+    echo "$ac_t"no 1>&6
-+  fi
-+  CFLAGS="$save_CFLAGS"
-+  $rm conftest*
-+
-+  if test "$compiler_rtti_exceptions" = "yes"; then
-+    no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
-+  else
-+    no_builtin_flag=' -fno-builtin'
-+  fi
-+  
-+fi
-+
-+# Check for any special shared library compilation flags.
-+if test -n "$special_shlib_compile_flags"; then
-+  echo "$progname: warning: \`$CC' requires \`$special_shlib_compile_flags' to build shared libraries" 1>&2
-+  if echo "$old_CC $old_CFLAGS " | egrep -e "[         ]$special_shlib_compile_flags[  ]" >/dev/null; then :
-+  else
-+    echo "$progname: add \`$special_shlib_compile_flags' to the CC or CFLAGS env variable and reconfigure" 1>&2
-+    can_build_shared=no
-+  fi
-+fi
-+
-+echo $ac_n "checking if $compiler static flag $link_static_flag works... $ac_c" 1>&6
-+$rm conftest*
-+echo 'main(){return(0);}' > conftest.c
-+save_LDFLAGS="$LDFLAGS"
-+LDFLAGS="$LDFLAGS $link_static_flag"
-+echo "$progname:958: checking if $compiler static flag $link_static_flag works" >&5
-+if { (eval echo $progname:959: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-+  echo "$ac_t$link_static_flag" 1>&6
-+else
-+  echo "$ac_t"none 1>&6
-+  link_static_flag=
-+fi
-+LDFLAGS="$save_LDFLAGS"
-+$rm conftest*
-+
-+if test -z "$LN_S"; then
-+  # Check to see if we can use ln -s, or we need hard links.
-+  echo $ac_n "checking whether ln -s works... $ac_c" 1>&6
-+  $rm conftest.dat
-+  if ln -s X conftest.dat 2>/dev/null; then
-+    $rm conftest.dat
-+    LN_S="ln -s"
-+  else
-+    LN_S=ln
-+  fi
-+  if test "$LN_S" = "ln -s"; then
-+    echo "$ac_t"yes 1>&6
-+  else
-+    echo "$ac_t"no 1>&6
-+  fi
-+fi
-+
-+# Make sure LD is an absolute path.
-+if test -z "$LD"; then
-+  ac_prog=ld
-+  if test "$with_gcc" = yes; then
-+    # Check if gcc -print-prog-name=ld gives a path.
-+    echo $ac_n "checking for ld used by GCC... $ac_c" 1>&6
-+    echo "$progname:991: checking for ld used by GCC" >&5
-+    ac_prog=`($CC -print-prog-name=ld) 2>&5`
-+    case "$ac_prog" in
-+    # Accept absolute paths.
-+    [\\/]* | [A-Za-z]:[\\/]*)
-+      re_direlt='/[^/][^/]*/\.\./'
-+      # Canonicalize the path of ld
-+      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-+       ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-+      done
-+      test -z "$LD" && LD="$ac_prog"
-+      ;;
-+    "")
-+      # If it fails, then pretend we are not using GCC.
-+      ac_prog=ld
-+      ;;
-+    *)
-+      # If it is relative, then search for the first ld in PATH.
-+      with_gnu_ld=unknown
-+      ;;
-+    esac
-+  elif test "$with_gnu_ld" = yes; then
-+    echo $ac_n "checking for GNU ld... $ac_c" 1>&6
-+    echo "$progname:1015: checking for GNU ld" >&5
-+  else
-+    echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-+    echo "$progname:1018: checking for non-GNU ld" >&5
-+  fi
-+
-+  if test -z "$LD"; then
-+    IFS="${IFS=        }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
-+    for ac_dir in $PATH; do
-+      test -z "$ac_dir" && ac_dir=.
-+      if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-+       LD="$ac_dir/$ac_prog"
-+       # Check to see if the program is GNU ld.  I'd rather use --version,
-+       # but apparently some GNU ld's only accept -v.
-+       # Break only if it was the GNU/non-GNU ld that we prefer.
-+       if "$LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-+         test "$with_gnu_ld" != no && break
-+       else
-+         test "$with_gnu_ld" != yes && break
-+       fi
-+      fi
-+    done
-+    IFS="$ac_save_ifs"
-+  fi
-+
-+  if test -n "$LD"; then
-+    echo "$ac_t$LD" 1>&6
-+  else
-+    echo "$ac_t"no 1>&6
-+  fi
-+
-+  if test -z "$LD"; then
-+    echo "$progname: error: no acceptable ld found in \$PATH" 1>&2
-+    exit 1
-+  fi
-+fi
-+
-+# Check to see if it really is or is not GNU ld.
-+echo $ac_n "checking if the linker ($LD) is GNU ld... $ac_c" 1>&6
-+# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-+  with_gnu_ld=yes
-+else
-+  with_gnu_ld=no
-+fi
-+echo "$ac_t$with_gnu_ld" 1>&6
-+
-+# See if the linker supports building shared libraries.
-+echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6
-+
-+allow_undefined_flag=
-+no_undefined_flag=
-+need_lib_prefix=unknown
-+need_version=unknown
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+archive_cmds=
-+archive_expsym_cmds=
-+old_archive_from_new_cmds=
-+export_dynamic_flag_spec=
-+whole_archive_flag_spec=
-+thread_safe_flag_spec=
-+hardcode_libdir_flag_spec=
-+hardcode_libdir_separator=
-+hardcode_direct=no
-+hardcode_minus_L=no
-+hardcode_shlibpath_var=unsupported
-+runpath_var=
-+always_export_symbols=no
-+export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+# include_expsyms should be a list of space-separated symbols to be *always*
-+# included in the symbol list
-+include_expsyms=
-+# exclude_expsyms can be an egrep regular expression of symbols to exclude
-+# it will be wrapped by ` (' and `)$', so one must not match beginning or
-+# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-+# as well as any symbol that contains `d'.
-+exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
-+# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-+# platforms (ab)use it in PIC code, but their linkers get confused if
-+# the symbol is explicitly referenced.  Since portable code cannot
-+# rely on this symbol name, it's probably fine to never include it in
-+# preloaded symbol tables.
-+
-+case "$host_os" in
-+cygwin* | mingw*)
-+  # FIXME: the MSVC++ port hasn't been tested in a loooong time
-+  # When not using gcc, we currently assume that we are using
-+  # Microsoft Visual C++.
-+  if test "$with_gcc" != yes; then
-+    with_gnu_ld=no
-+  fi
-+  ;;
-+
-+esac
-+
-+ld_shlibs=yes
-+if test "$with_gnu_ld" = yes; then
-+  # If archive_cmds runs LD, not CC, wlarc should be empty
-+  wlarc='${wl}'
-+
-+  # See if GNU ld supports shared libraries.
-+  case "$host_os" in
-+  aix3* | aix4*)
-+    # On AIX, the GNU linker is very broken
-+    ld_shlibs=no
-+    cat <<EOF 1>&2
-+
-+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-+*** to be unable to reliably create shared libraries on AIX.
-+*** Therefore, libtool is disabling shared libraries support.  If you
-+*** really care for shared libraries, you may want to modify your PATH
-+*** so that a non-GNU linker is found, and then restart.
-+
-+EOF
-+    ;;
-+
-+  amigaos*)
-+    archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
-+    hardcode_libdir_flag_spec='-L$libdir'
-+    hardcode_minus_L=yes
-+
-+    # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-+    # that the semantics of dynamic libraries on AmigaOS, at least up
-+    # to version 4, is to share data among multiple programs linked
-+    # with the same dynamic library.  Since this doesn't match the
-+    # behavior of shared libraries on other platforms, we can use
-+    # them.
-+    ld_shlibs=no
-+    ;;
-+
-+  beos*)
-+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-+      allow_undefined_flag=unsupported
-+      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-+      # support --undefined.  This deserves some investigation.  FIXME
-+      archive_cmds='$CC -nostart $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
-+    else
-+      ld_shlibs=no
-+    fi
-+    ;;
-+
-+  cygwin* | mingw*)
-+    # hardcode_libdir_flag_spec is actually meaningless, as there is
-+    # no search path for DLLs.
-+    hardcode_libdir_flag_spec='-L$libdir'
-+    allow_undefined_flag=unsupported
-+    always_export_symbols=yes
-+
-+    # Extract the symbol export list from an `--export-all' def file,
-+    # then regenerate the def file from the symbol export list, so that
-+    # the compiled dll only exports the symbol export list.
-+    export_symbols_cmds='test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
-+      test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~
-+      $DLLTOOL --export-all --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --output-def $objdir/$soname-def  $objdir/$soname-ltdll.$objext $libobjs $convenience~
-+      sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]* ; *//" < $objdir/$soname-def > $export_symbols'
-+
-+    archive_expsym_cmds='echo EXPORTS > $objdir/$soname-def~
-+      _lt_hint=1;
-+      for symbol in `cat $export_symbols`; do
-+       echo "  \$symbol @ \$_lt_hint ; " >> $objdir/$soname-def;
-+       _lt_hint=`expr 1 + \$_lt_hint`;
-+      done~
-+      test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
-+      test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~
-+      $CC -Wl,--base-file,$objdir/$soname-base -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~
-+      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~
-+      $CC -Wl,--base-file,$objdir/$soname-base $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~
-+      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~
-+      $CC $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts'
-+
-+      old_archive_from_new_cmds='$DLLTOOL --as=$AS --dllname $soname --def $objdir/$soname-def --output-lib $objdir/$libname.a' 
-+    ;;
-+
-+  netbsd*)
-+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-+      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
-+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+    else
-+      archive_cmds='$LD -Bshareable $libobjs $deplibs $linkopts -o $lib'
-+      # can we support soname and/or expsyms with a.out? -oliva
-+    fi
-+    ;;
-+
-+  solaris*)
-+    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
-+      ld_shlibs=no
-+      cat <<EOF 1>&2
-+
-+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-+*** create shared libraries on Solaris systems.  Therefore, libtool
-+*** is disabling shared libraries support.  We urge you to upgrade GNU
-+*** binutils to release 2.9.1 or newer.  Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+EOF
-+    elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-+      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
-+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+    else
-+      ld_shlibs=no
-+    fi
-+    ;;      
-+
-+  sunos4*)
-+    archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linkopts'
-+    wlarc=
-+    hardcode_direct=yes
-+    hardcode_shlibpath_var=no
-+    ;;
-+
-+  *)
-+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-+      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
-+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+    else
-+      ld_shlibs=no
-+    fi
-+    ;;
-+  esac
-+
-+  if test "$ld_shlibs" = yes; then
-+    runpath_var=LD_RUN_PATH
-+    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
-+    export_dynamic_flag_spec='${wl}--export-dynamic'
-+    case $host_os in
-+    cygwin* | mingw*)
-+      # dlltool doesn't understand --whole-archive et. al.
-+      whole_archive_flag_spec=
-+      ;;
-+    *)
-+      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+      ;;
-+    esac
-+  fi
-+else
-+  # PORTME fill in a description of your system's linker (not GNU ld)
-+  case "$host_os" in
-+  aix3*)
-+    allow_undefined_flag=unsupported
-+    always_export_symbols=yes
-+    archive_expsym_cmds='$LD -o $objdir/$soname $libobjs $deplibs $linkopts -bE:$export_symbols -T512 -H512 -bM:SRE~$AR cru $lib $objdir/$soname'
-+    # Note: this linker hardcodes the directories in LIBPATH if there
-+    # are no directories specified by -L.
-+    hardcode_minus_L=yes
-+    if test "$with_gcc" = yes && test -z "$link_static_flag"; then
-+      # Neither direct hardcoding nor static linking is supported with a
-+      # broken collect2.
-+      hardcode_direct=unsupported
-+    fi
-+    ;;
-+
-+  aix4*)
-+    hardcode_libdir_flag_spec='${wl}-b ${wl}nolibpath ${wl}-b ${wl}libpath:$libdir:/usr/lib:/lib'
-+    hardcode_libdir_separator=':'
-+    if test "$with_gcc" = yes; then
-+      collect2name=`${CC} -print-prog-name=collect2`
-+      if test -f "$collect2name" && \
-+        strings "$collect2name" | grep resolve_lib_name >/dev/null
-+      then
-+       # We have reworked collect2
-+       hardcode_direct=yes
-+      else
-+       # We have old collect2
-+       hardcode_direct=unsupported
-+       # It fails to find uninstalled libraries when the uninstalled
-+       # path is not listed in the libpath.  Setting hardcode_minus_L
-+       # to unsupported forces relinking
-+       hardcode_minus_L=yes
-+       hardcode_libdir_flag_spec='-L$libdir'
-+       hardcode_libdir_separator=
-+      fi
-+      shared_flag='-shared'
-+    else
-+      shared_flag='${wl}-bM:SRE'
-+      hardcode_direct=yes
-+    fi
-+    allow_undefined_flag=' ${wl}-berok'
-+    archive_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bexpall ${wl}-bnoentry${allow_undefined_flag}'
-+    archive_expsym_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}'
-+    case "$host_os" in aix4.[01]|aix4.[01].*)
-+      # According to Greg Wooledge, -bexpall is only supported from AIX 4.2 on
-+      always_export_symbols=yes ;;
-+    esac
-+   ;;
-+
-+  amigaos*)
-+    archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
-+    hardcode_libdir_flag_spec='-L$libdir'
-+    hardcode_minus_L=yes
-+    # see comment about different semantics on the GNU ld section
-+    ld_shlibs=no
-+    ;;
-+
-+  cygwin* | mingw*)
-+    # When not using gcc, we currently assume that we are using
-+    # Microsoft Visual C++.
-+    # hardcode_libdir_flag_spec is actually meaningless, as there is
-+    # no search path for DLLs.
-+    hardcode_libdir_flag_spec=' '
-+    allow_undefined_flag=unsupported
-+    # Tell ltmain to make .lib files, not .a files.
-+    libext=lib
-+    # FIXME: Setting linknames here is a bad hack.
-+    archive_cmds='$CC -o $lib $libobjs $linkopts `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-+    # The linker will automatically build a .lib file if we build a DLL.
-+    old_archive_from_new_cmds='true'
-+    # FIXME: Should let the user specify the lib program.
-+    old_archive_cmds='lib /OUT:$oldlib$oldobjs'
-+    fix_srcfile_path='`cygpath -w $srcfile`'
-+    ;;
-+
-+  freebsd1*)
-+    ld_shlibs=no
-+    ;;
-+
-+  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-+  # support.  Future versions do this automatically, but an explicit c++rt0.o
-+  # does not break anything, and helps significantly (at the cost of a little
-+  # extra space).
-+  freebsd2.2*)
-+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts /usr/lib/c++rt0.o'
-+    hardcode_libdir_flag_spec='-R$libdir'
-+    hardcode_direct=yes
-+    hardcode_shlibpath_var=no
-+    ;;
-+
-+  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-+  freebsd2*)
-+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'
-+    hardcode_direct=yes
-+    hardcode_minus_L=yes
-+    hardcode_shlibpath_var=no
-+    ;;
-+
-+  # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-+  freebsd*)
-+    archive_cmds='$CC -shared -o $lib $libobjs $deplibs $linkopts'
-+    hardcode_libdir_flag_spec='-R$libdir'
-+    hardcode_direct=yes
-+    hardcode_shlibpath_var=no
-+    ;;
-+
-+  hpux9* | hpux10* | hpux11*)
-+    case "$host_os" in
-+    hpux9*) archive_cmds='$rm $objdir/$soname~$LD -b +b $install_libdir -o $objdir/$soname $libobjs $deplibs $linkopts~test $objdir/$soname = $lib || mv $objdir/$soname $lib' ;;
-+    *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linkopts' ;;
-+    esac
-+    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-+    hardcode_libdir_separator=:
-+    hardcode_direct=yes
-+    hardcode_minus_L=yes # Not in the search PATH, but as the default
-+                        # location of the library.
-+    export_dynamic_flag_spec='${wl}-E'
-+    ;;
-+
-+  irix5* | irix6*)
-+    if test "$with_gcc" = yes; then
-+      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-+    else
-+      archive_cmds='$LD -shared $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-+    fi
-+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+    hardcode_libdir_separator=:
-+    ;;
-+
-+  netbsd*)
-+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'  # a.out
-+    else
-+      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linkopts'      # ELF
-+    fi
-+    hardcode_libdir_flag_spec='${wl}-R$libdir'
-+    hardcode_direct=yes
-+    hardcode_shlibpath_var=no
-+    ;;
-+
-+  openbsd*)
-+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'
-+    hardcode_libdir_flag_spec='-R$libdir'
-+    hardcode_direct=yes
-+    hardcode_shlibpath_var=no
-+    ;;
-+
-+  os2*)
-+    hardcode_libdir_flag_spec='-L$libdir'
-+    hardcode_minus_L=yes
-+    allow_undefined_flag=unsupported
-+    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $objdir/$libname.def~$echo DATA >> $objdir/$libname.def~$echo " SINGLE NONSHARED" >> $objdir/$libname.def~$echo EXPORTS >> $objdir/$libname.def~emxexp $libobjs >> $objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $linkopts $objdir/$libname.def'
-+    old_archive_from_new_cmds='emximp -o $objdir/$libname.a $objdir/$libname.def'
-+    ;;
-+
-+  osf3* | osf4*)
-+    if test "$with_gcc" = yes; then
-+      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-+      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-+    else
-+      allow_undefined_flag=' -expect_unresolved \*'
-+      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-+    fi
-+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+    hardcode_libdir_separator=:
-+    ;;
-+
-+  sco3.2v5*)
-+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
-+    hardcode_shlibpath_var=no
-+    runpath_var=LD_RUN_PATH
-+    hardcode_runpath_var=yes
-+    ;;
-+
-+  solaris*)
-+    no_undefined_flag=' -z text'
-+    # $CC -shared without GNU ld will not create a library from C++
-+    # object files and a static libstdc++, better avoid it by now
-+    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts'
-+    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+               $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp'
-+    hardcode_libdir_flag_spec='-R$libdir'
-+    hardcode_shlibpath_var=no
-+    case "$host_os" in
-+    solaris2.[0-5] | solaris2.[0-5].*) ;;
-+    *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-+      whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
-+    esac
-+    ;;
-+
-+  sunos4*)
-+    archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts'
-+    hardcode_libdir_flag_spec='-L$libdir'
-+    hardcode_direct=yes
-+    hardcode_minus_L=yes
-+    hardcode_shlibpath_var=no
-+    ;;
-+
-+  sysv4)
-+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
-+    runpath_var='LD_RUN_PATH'
-+    hardcode_shlibpath_var=no
-+    hardcode_direct=no #Motorola manual says yes, but my tests say they lie 
-+    ;;  
-+
-+  sysv4.3*)
-+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
-+    hardcode_shlibpath_var=no
-+    export_dynamic_flag_spec='-Bexport'
-+    ;;
-+
-+  uts4*)
-+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
-+    hardcode_libdir_flag_spec='-L$libdir'
-+    hardcode_shlibpath_var=no
-+    ;;
-+
-+  dgux*)
-+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
-+    hardcode_libdir_flag_spec='-L$libdir'
-+    hardcode_shlibpath_var=no
-+    ;;
-+
-+  sysv4*MP*)
-+    if test -d /usr/nec ;then
-+    # archive_cmds='$LD -G -z text -h $soname -o $lib$libobjs$deplibs'
-+    archive_cmds='$LD -G -h $soname -o $lib$libobjs$deplibs'
-+    hardcode_shlibpath_var=no
-+    runpath_var=LD_RUN_PATH
-+    hardcode_runpath_var=yes
-+    ld_shlibs=yes
-+    fi
-+    ;;
-+
-+  *)
-+    ld_shlibs=no
-+    ;;
-+  esac
-+fi
-+echo "$ac_t$ld_shlibs" 1>&6
-+test "$ld_shlibs" = no && can_build_shared=no
-+
-+if test -z "$NM"; then
-+  echo $ac_n "checking for BSD-compatible nm... $ac_c" 1>&6
-+  case "$NM" in
-+  [\\/]* | [A-Za-z]:[\\/]*) ;; # Let the user override the test with a path.
-+  *)
-+    IFS="${IFS=        }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
-+    for ac_dir in $PATH /usr/ucb /usr/ccs/bin /bin; do
-+      test -z "$ac_dir" && ac_dir=.
-+      if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext; then
-+       # Check to see if the nm accepts a BSD-compat flag.
-+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-+       #   nm: unknown option "B" ignored
-+       if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-+         NM="$ac_dir/nm -B"
-+         break
-+       elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-+         NM="$ac_dir/nm -p"
-+         break
-+       else
-+         NM=${NM="$ac_dir/nm"} # keep the first match, but
-+         continue # so that we can try to find one that supports BSD flags
-+       fi
-+      fi
-+    done
-+    IFS="$ac_save_ifs"
-+    test -z "$NM" && NM=nm
-+    ;;
-+  esac
-+  echo "$ac_t$NM" 1>&6
-+fi
-+
-+# Check for command to grab the raw symbol name followed by C symbol from nm.
-+echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6
-+
-+# These are sane defaults that work on at least a few old systems.
-+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-+
-+# Character class describing NM global symbol codes.
-+symcode='[BCDEGRST]'
-+
-+# Regexp to match symbols that can be accessed directly from C.
-+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-+
-+# Transform the above into a raw symbol and a C symbol.
-+symxfrm='\1 \2\3 \3'
-+
-+# Transform an extracted symbol line into a proper C declaration
-+global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-+
-+# Define system-specific variables.
-+case "$host_os" in
-+aix*)
-+  symcode='[BCDT]'
-+  ;;
-+cygwin* | mingw*)
-+  symcode='[ABCDGISTW]'
-+  ;;
-+hpux*) # Its linker distinguishes data from code symbols
-+  global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
-+  ;;
-+irix*)
-+  symcode='[BCDEGRST]'
-+  ;;
-+solaris*)
-+  symcode='[BDT]'
-+  ;;
-+sysv4)
-+  symcode='[DFNSTU]'
-+  ;;
-+esac
-+
-+# If we're using GNU nm, then use its standard symbol codes.
-+if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-+  symcode='[ABCDGISTW]'
-+fi
-+
-+# Try without a prefix undercore, then with it.
-+for ac_symprfx in "" "_"; do
-+
-+  # Write the raw and C identifiers.
-+  global_symbol_pipe="sed -n -e 's/^.*[        ]\($symcode\)[  ][      ]*\($ac_symprfx\)$sympat$/$symxfrm/p'"
-+
-+  # Check to see that the pipe works correctly.
-+  pipe_works=no
-+  $rm conftest*
-+  cat > conftest.c <<EOF
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+char nm_test_var;
-+void nm_test_func(){}
-+#ifdef __cplusplus
-+}
-+#endif
-+main(){nm_test_var='a';nm_test_func();return(0);}
-+EOF
-+
-+  echo "$progname:1592: checking if global_symbol_pipe works" >&5
-+  if { (eval echo $progname:1593: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then
-+    # Now try to grab the symbols.
-+    nlist=conftest.nm
-+    if { echo "$progname:1596: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then
-+
-+      # Try sorting and uniquifying the output.
-+      if sort "$nlist" | uniq > "$nlist"T; then
-+       mv -f "$nlist"T "$nlist"
-+      else
-+       rm -f "$nlist"T
-+      fi
-+
-+      # Make sure that we snagged all the symbols we need.
-+      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
-+       if egrep ' nm_test_func$' "$nlist" >/dev/null; then
-+         cat <<EOF > conftest.c
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+EOF
-+         # Now generate the symbol file.
-+         eval "$global_symbol_to_cdecl"' < "$nlist" >> conftest.c'
-+
-+         cat <<EOF >> conftest.c
-+#if defined (__STDC__) && __STDC__
-+# define lt_ptr_t void *
-+#else
-+# define lt_ptr_t char *
-+# define const
-+#endif
-+
-+/* The mapping between symbol names and symbols. */
-+const struct {
-+  const char *name;
-+  lt_ptr_t address;
-+}
-+lt_preloaded_symbols[] =
-+{
-+EOF
-+         sed 's/^. \(.*\) \(.*\)$/  {"\2", (lt_ptr_t) \&\2},/' < "$nlist" >> conftest.c
-+         cat <<\EOF >> conftest.c
-+  {0, (lt_ptr_t) 0}
-+};
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+EOF
-+         # Now try linking the two files.
-+         mv conftest.$objext conftstm.$objext
-+         save_LIBS="$LIBS"
-+         save_CFLAGS="$CFLAGS"
-+         LIBS="conftstm.$objext"
-+         CFLAGS="$CFLAGS$no_builtin_flag"
-+         if { (eval echo $progname:1648: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-+           pipe_works=yes
-+         else
-+           echo "$progname: failed program was:" >&5
-+           cat conftest.c >&5
-+         fi
-+         LIBS="$save_LIBS"
-+       else
-+         echo "cannot find nm_test_func in $nlist" >&5
-+       fi
-+      else
-+       echo "cannot find nm_test_var in $nlist" >&5
-+      fi
-+    else
-+      echo "cannot run $global_symbol_pipe" >&5
-+    fi
-+  else
-+    echo "$progname: failed program was:" >&5
-+    cat conftest.c >&5
-+  fi
-+  $rm conftest* conftst*
-+
-+  # Do not use the global_symbol_pipe unless it works.
-+  if test "$pipe_works" = yes; then
-+    break
-+  else
-+    global_symbol_pipe=
-+  fi
-+done
-+if test "$pipe_works" = yes; then
-+  echo "${ac_t}ok" 1>&6
-+else
-+  echo "${ac_t}failed" 1>&6
-+fi
-+
-+if test -z "$global_symbol_pipe"; then
-+  global_symbol_to_cdecl=
-+fi
-+
-+# Check hardcoding attributes.
-+echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6
-+hardcode_action=
-+if test -n "$hardcode_libdir_flag_spec" || \
-+   test -n "$runpath_var"; then
-+
-+  # We can hardcode non-existant directories.
-+  if test "$hardcode_direct" != no &&
-+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+     # have to relink, otherwise we might link with an installed library
-+     # when we should be linking with a yet-to-be-installed one
-+     ## test "$hardcode_shlibpath_var" != no &&
-+     test "$hardcode_minus_L" != no; then
-+    # Linking always hardcodes the temporary library directory.
-+    hardcode_action=relink
-+  else
-+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+    hardcode_action=immediate
-+  fi
-+else
-+  # We cannot hardcode anything, or else we can only hardcode existing
-+  # directories.
-+  hardcode_action=unsupported
-+fi
-+echo "$ac_t$hardcode_action" 1>&6
-+
-+
-+reload_flag=
-+reload_cmds='$LD$reload_flag -o $output$reload_objs'
-+echo $ac_n "checking for $LD option to reload object files... $ac_c" 1>&6
-+# PORTME Some linkers may need a different reload flag.
-+reload_flag='-r'
-+echo "$ac_t$reload_flag" 1>&6
-+test -n "$reload_flag" && reload_flag=" $reload_flag"
-+
-+# PORTME Fill in your ld.so characteristics
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-+file_magic_cmd=
-+file_magic_test_file=
-+deplibs_check_method='unknown'
-+# Need to set the preceding variable on all platforms that support
-+# interlibrary dependencies.
-+# 'none' -- dependencies not supported.
-+# `unknown' -- same as none, but documents that we really don't know.
-+# 'pass_all' -- all dependencies passed with no checks.
-+# 'test_compile' -- check by making test program.
-+# 'file_magic [regex]' -- check by looking for files in library path
-+# which responds to the $file_magic_cmd with a given egrep regex.
-+# If you have `file' or equivalent on your system and you're not sure
-+# whether `pass_all' will *always* work, you probably want this one.
-+echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6
-+case "$host_os" in
-+aix3*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}.so$versuffix $libname.a'
-+  shlibpath_var=LIBPATH
-+
-+  # AIX has no versioning support, so we append a major version to the name.
-+  soname_spec='${libname}${release}.so$major'
-+  ;;
-+
-+aix4*)
-+  version_type=linux
-+  # AIX has no versioning support, so currently we can not hardcode correct
-+  # soname into executable. Probably we can add versioning support to
-+  # collect2, so additional links can be useful in future.
-+  # We preserve .a as extension for shared libraries though AIX4.2
-+  # and later linker supports .so
-+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.a'
-+  shlibpath_var=LIBPATH
-+  deplibs_check_method=pass_all
-+  ;;
-+
-+amigaos*)
-+  library_names_spec='$libname.ixlibrary $libname.a'
-+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-+  ;;
-+
-+beos*)
-+  library_names_spec='${libname}.so'
-+  dynamic_linker="$host_os ld.so"
-+  shlibpath_var=LIBRARY_PATH
-+  deplibs_check_method=pass_all
-+  lt_cv_dlopen="load_add_on"
-+  lt_cv_dlopen_libs=
-+  lt_cv_dlopen_self=yes
-+  ;;
-+
-+bsdi4*)
-+  version_type=linux
-+  library_names_spec='${libname}.so$major ${libname}.so'
-+  soname_spec='${libname}.so'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-+  file_magic_cmd=/usr/bin/file
-+  file_magic_test_file=/shlib/libc.so
-+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+  # the default ld.so.conf also contains /usr/contrib/lib and
-+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+  # libtool to hard-code these into programs
-+  ;;
-+
-+cygwin* | mingw*)
-+  version_type=windows
-+  need_version=no
-+  need_lib_prefix=no
-+  if test "$with_gcc" = yes; then
-+    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.a'
-+  else
-+    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
-+  fi
-+  dynamic_linker='Win32 ld.exe'
-+  deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-+  file_magic_cmd='${OBJDUMP} -f'
-+  # FIXME: first we should search . and the directory the executable is in
-+  shlibpath_var=PATH
-+  lt_cv_dlopen="LoadLibrary"
-+  lt_cv_dlopen_libs=
-+  ;;
-+
-+freebsd1*)
-+  dynamic_linker=no
-+  ;;
-+  
-+freebsd*)
-+  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
-+  version_type=freebsd-$objformat
-+  case "$version_type" in
-+    freebsd-elf*)
-+      deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
-+      file_magic_cmd=/usr/bin/file
-+      file_magic_test_file=`echo /usr/lib/libc.so*`
-+      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-+      need_version=no
-+      need_lib_prefix=no
-+      ;;
-+    freebsd-*)
-+      deplibs_check_method=unknown
-+      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
-+      need_version=yes
-+      ;;
-+  esac
-+  finish_cmds='PATH="\$PATH:/sbin" OBJFORMAT="'"$objformat"'" ldconfig -m $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  case "$host_os" in
-+  freebsd2* | freebsd3.[01]*)
-+    shlibpath_overrides_runpath=yes
-+    ;;
-+  *) # from 3.2 on
-+    shlibpath_overrides_runpath=no
-+    ;;
-+  esac
-+  ;;
-+
-+gnu*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
-+  soname_spec='${libname}${release}.so$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+  # Give a soname corresponding to the major version so that dld.sl refuses to
-+  # link against other versions.
-+  dynamic_linker="$host_os dld.sl"
-+  version_type=sunos
-+  need_lib_prefix=no
-+  need_version=no
-+  shlibpath_var=SHLIB_PATH
-+  shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+  library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
-+  soname_spec='${libname}${release}.sl$major'
-+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+  postinstall_cmds='chmod 555 $lib'
-+  ;;
-+
-+irix5* | irix6*)
-+  version_type=irix
-+  need_lib_prefix=no
-+  need_version=no
-+  soname_spec='${libname}${release}.so.$major'
-+  library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major ${libname}${release}.so $libname.so'
-+  case "$host_os" in
-+  irix5*)
-+    libsuff= shlibsuff=
-+    # this will be overridden with pass_all, but let us keep it just in case
-+    deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-+    ;;
-+  *)
-+    case "$LD" in # libtool.m4 will add one of these switches to LD
-+    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
-+    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
-+    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+    *) libsuff= shlibsuff= libmagic=never-match;;
-+    esac
-+    # this will be overridden with pass_all, but let us keep it just in case
-+    deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
-+    ;;
-+  esac
-+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+  shlibpath_overrides_runpath=no
-+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+  file_magic_cmd=/usr/bin/file
-+  file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-+  deplibs_check_method='pass_all'
-+  ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
-+  dynamic_linker=no
-+  ;;
-+
-+# This must be Linux ELF.
-+linux-gnu*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-+  soname_spec='${libname}${release}.so$major'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=no
-+  deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
-+  file_magic_cmd=/usr/bin/file
-+  file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-+
-+  if test -f /lib/ld.so.1; then
-+    dynamic_linker='GNU ld.so'
-+  else
-+    # Only the GNU ld.so supports shared libraries on MkLinux.
-+    case "$host_cpu" in
-+    *) dynamic_linker='Linux ld.so' ;;
-+    esac
-+  fi
-+  ;;
-+
-+netbsd*)
-+  version_type=sunos
-+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+    dynamic_linker='NetBSD (a.out) ld.so'
-+  else
-+    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
-+    soname_spec='${libname}${release}.so$major'
-+    dynamic_linker='NetBSD ld.elf_so'
-+  fi
-+  shlibpath_var=LD_LIBRARY_PATH
-+  ;;
-+
-+openbsd*)
-+  version_type=sunos
-+  if test "$with_gnu_ld" = yes; then
-+    need_lib_prefix=no
-+    need_version=no
-+  fi
-+  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  ;;
-+
-+os2*)
-+  libname_spec='$name'
-+  need_lib_prefix=no
-+  library_names_spec='$libname.dll $libname.a'
-+  dynamic_linker='OS/2 ld.exe'
-+  shlibpath_var=LIBPATH
-+  ;;
-+
-+osf3* | osf4*)
-+  version_type=osf
-+  need_version=no
-+  soname_spec='${libname}${release}.so'
-+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  # this will be overridden with pass_all, but let us keep it just in case
-+  deplibs_check_method='file_magic COFF format alpha shared library'
-+  file_magic_cmd=/usr/bin/file
-+  file_magic_test_file=/shlib/libc.so
-+  deplibs_check_method='pass_all'
-+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+  ;;
-+
-+sco3.2v5*)
-+  version_type=osf
-+  soname_spec='${libname}${release}.so$major'
-+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  ;;
-+
-+solaris*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-+  soname_spec='${libname}${release}.so$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  # ldd complains unless libraries are executable
-+  postinstall_cmds='chmod +x $lib'
-+  deplibs_check_method="file_magic ELF [0-9][0-9]-bit [LM]SB dynamic lib"
-+  file_magic_cmd=/usr/bin/file
-+  file_magic_test_file=/lib/libc.so
-+  ;;
-+
-+sunos4*)
-+  version_type=sunos
-+  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  if test "$with_gnu_ld" = yes; then
-+    need_lib_prefix=no
-+  fi
-+  need_version=yes
-+  ;;
-+
-+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-+  soname_spec='${libname}${release}.so$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  case "$host_vendor" in
-+    ncr)
-+      deplibs_check_method='pass_all'
-+      ;;
-+    motorola)
-+      need_lib_prefix=no
-+      need_version=no
-+      shlibpath_overrides_runpath=no
-+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+      deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-+      file_magic_cmd=/usr/bin/file
-+      file_magic_test_file=`echo /usr/lib/libc.so*`
-+      ;;
-+  esac
-+  ;;
-+
-+uts4*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-+  soname_spec='${libname}${release}.so$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  ;;
-+
-+dgux*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-+  soname_spec='${libname}${release}.so$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  ;;
-+
-+sysv4*MP*)
-+  if test -d /usr/nec ;then
-+    version_type=linux
-+    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
-+    soname_spec='$libname.so.$major'
-+    shlibpath_var=LD_LIBRARY_PATH
-+  fi
-+  ;;
-+
-+*)
-+  dynamic_linker=no
-+  ;;
-+esac
-+echo "$ac_t$dynamic_linker" 1>&6
-+test "$dynamic_linker" = no && can_build_shared=no
-+
-+# Report the final consequences.
-+echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6
-+
-+# Only try to build win32 dlls if AC_LIBTOOL_WIN32_DLL was used in
-+# configure.in, otherwise build static only libraries.
-+case "$host_os" in
-+cygwin* | mingw* | os2*)
-+  if test x$can_build_shared = xyes; then
-+    test x$enable_win32_dll = xno && can_build_shared=no
-+    echo "checking if package supports dlls... $can_build_shared" 1>&6
-+  fi
-+;;
-+esac
-+
-+if test -n "$file_magic_test_file" && test -n "$file_magic_cmd"; then
-+  case "$deplibs_check_method" in
-+  "file_magic "*)
-+    file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-+    if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-+       egrep "$file_magic_regex" > /dev/null; then
-+      :
-+    else
-+      cat <<EOF 1>&2
-+
-+*** Warning: the command libtool uses to detect shared libraries,
-+*** $file_magic_cmd, produces output that libtool cannot recognize.
-+*** The result is that libtool may fail to recognize shared libraries
-+*** as such.  This will affect the creation of libtool libraries that
-+*** depend on shared libraries, but programs linked with such libtool
-+*** libraries will work regardless of this problem.  Nevertheless, you
-+*** may want to report the problem to your system manager and/or to
-+*** bug-libtool@gnu.org
-+
-+EOF
-+    fi ;;
-+  esac
-+fi
-+
-+echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6
-+test "$can_build_shared" = "no" && enable_shared=no
-+
-+# On AIX, shared libraries and static libraries use the same namespace, and
-+# are all built from PIC.
-+case "$host_os" in
-+aix3*)
-+  test "$enable_shared" = yes && enable_static=no
-+  if test -n "$RANLIB"; then
-+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-+    postinstall_cmds='$RANLIB $lib'
-+  fi
-+  ;;
-+
-+aix4*)
-+  test "$enable_shared" = yes && enable_static=no
-+  ;;
-+esac
-+
-+echo "$ac_t$enable_shared" 1>&6
-+
-+# Make sure either enable_shared or enable_static is yes.
-+test "$enable_shared" = yes || enable_static=yes
-+
-+echo "checking whether to build static libraries... $enable_static" 1>&6
-+
-+if test "$hardcode_action" = relink; then
-+  # Fast installation is not supported
-+  enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+     test "$enable_shared" = no; then
-+  # Fast installation is not necessary
-+  enable_fast_install=needless
-+fi
-+
-+echo $ac_n "checking for objdir... $ac_c" 1>&6
-+rm -f .libs 2>/dev/null
-+mkdir .libs 2>/dev/null
-+if test -d .libs; then
-+  objdir=.libs
-+else
-+  # MS-DOS does not allow filenames that begin with a dot.
-+  objdir=_libs
-+fi
-+rmdir .libs 2>/dev/null
-+echo "$ac_t$objdir" 1>&6
-+
-+if test "x$enable_dlopen" != xyes; then
-+  enable_dlopen=unknown
-+  enable_dlopen_self=unknown
-+  enable_dlopen_self_static=unknown
-+else
-+if eval "test \"`echo '$''{'lt_cv_dlopen'+set}'`\" != set"; then
-+  lt_cv_dlopen=no lt_cv_dlopen_libs=
-+echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-+echo "$progname:2170: checking for dlopen in -ldl" >&5
-+ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
-+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-+  echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+  ac_save_LIBS="$LIBS"
-+LIBS="-ldl  $LIBS"
-+cat > conftest.$ac_ext <<EOF
-+#line 2178 "ltconfig"
-+/* Override any gcc2 internal prototype to avoid an error.  */
-+/* We use char because int might match the return type of a gcc2
-+    builtin and then its argument prototype would still apply.  */
-+char dlopen();
-+
-+int main() {
-+dlopen()
-+; return 0; }
-+EOF
-+if { (eval echo $progname:2188: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+  rm -rf conftest*
-+  eval "ac_cv_lib_$ac_lib_var=yes"
-+else
-+  echo "$progname: failed program was:" >&5
-+  cat conftest.$ac_ext >&5
-+  rm -rf conftest*
-+  eval "ac_cv_lib_$ac_lib_var=no"
-+fi
-+rm -f conftest*
-+LIBS="$ac_save_LIBS"
-+
-+fi
-+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-+  echo "$ac_t""yes" 1>&6
-+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-+else
-+  echo "$ac_t""no" 1>&6
-+echo $ac_n "checking for dlopen""... $ac_c" 1>&6
-+echo "$progname:2207: checking for dlopen" >&5
-+if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
-+  echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+  cat > conftest.$ac_ext <<EOF
-+#line 2212 "ltconfig"
-+/* System header to define __stub macros and hopefully few prototypes,
-+    which can conflict with char dlopen(); below.  */
-+#include <assert.h>
-+/* Override any gcc2 internal prototype to avoid an error.  */
-+/* We use char because int might match the return type of a gcc2
-+    builtin and then its argument prototype would still apply.  */
-+char dlopen();
-+
-+int main() {
-+
-+/* The GNU C library defines this for functions which it implements
-+    to always fail with ENOSYS.  Some functions are actually named
-+    something starting with __ and the normal name is an alias.  */
-+#if defined (__stub_dlopen) || defined (__stub___dlopen)
-+choke me
-+#else
-+dlopen();
-+#endif
-+
-+; return 0; }
-+EOF
-+if { (eval echo $progname:2234: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+  rm -rf conftest*
-+  eval "ac_cv_func_dlopen=yes"
-+else
-+  echo "$progname: failed program was:" >&5
-+  cat conftest.$ac_ext >&5
-+  rm -rf conftest*
-+  eval "ac_cv_func_dlopen=no"
-+fi
-+rm -f conftest*
-+fi
-+if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
-+  echo "$ac_t""yes" 1>&6
-+  lt_cv_dlopen="dlopen"
-+else
-+  echo "$ac_t""no" 1>&6
-+echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
-+echo "$progname:2251: checking for dld_link in -ldld" >&5
-+ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'`
-+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-+  echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+  ac_save_LIBS="$LIBS"
-+LIBS="-ldld  $LIBS"
-+cat > conftest.$ac_ext <<EOF
-+#line 2259 "ltconfig"
-+/* Override any gcc2 internal prototype to avoid an error.  */
-+/* We use char because int might match the return type of a gcc2
-+    builtin and then its argument prototype would still apply.  */
-+char dld_link();
-+
-+int main() {
-+dld_link()
-+; return 0; }
-+EOF
-+if { (eval echo $progname:2269: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+  rm -rf conftest*
-+  eval "ac_cv_lib_$ac_lib_var=yes"
-+else
-+  echo "$progname: failed program was:" >&5
-+  cat conftest.$ac_ext >&5
-+  rm -rf conftest*
-+  eval "ac_cv_lib_$ac_lib_var=no"
-+fi
-+rm -f conftest*
-+LIBS="$ac_save_LIBS"
-+
-+fi
-+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-+  echo "$ac_t""yes" 1>&6
-+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
-+else
-+  echo "$ac_t""no" 1>&6
-+echo $ac_n "checking for shl_load""... $ac_c" 1>&6
-+echo "$progname:2288: checking for shl_load" >&5
-+if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
-+  echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+  cat > conftest.$ac_ext <<EOF
-+#line 2293 "ltconfig"
-+/* System header to define __stub macros and hopefully few prototypes,
-+    which can conflict with char shl_load(); below.  */
-+#include <assert.h>
-+/* Override any gcc2 internal prototype to avoid an error.  */
-+/* We use char because int might match the return type of a gcc2
-+    builtin and then its argument prototype would still apply.  */
-+char shl_load();
-+
-+int main() {
-+
-+/* The GNU C library defines this for functions which it implements
-+    to always fail with ENOSYS.  Some functions are actually named
-+    something starting with __ and the normal name is an alias.  */
-+#if defined (__stub_shl_load) || defined (__stub___shl_load)
-+choke me
-+#else
-+shl_load();
-+#endif
-+
-+; return 0; }
-+EOF
-+if { (eval echo $progname:2315: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+  rm -rf conftest*
-+  eval "ac_cv_func_shl_load=yes"
-+else
-+  echo "$progname: failed program was:" >&5
-+  cat conftest.$ac_ext >&5
-+  rm -rf conftest*
-+  eval "ac_cv_func_shl_load=no"
-+fi
-+rm -f conftest*
-+fi
-+
-+if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then
-+  echo "$ac_t""yes" 1>&6
-+  lt_cv_dlopen="shl_load"
-+else
-+  echo "$ac_t""no" 1>&6
-+echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
-+echo "$progname:2333: checking for shl_load in -ldld" >&5
-+ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
-+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-+  echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+  ac_save_LIBS="$LIBS"
-+LIBS="-ldld  $LIBS"
-+cat > conftest.$ac_ext <<EOF
-+#line 2341 "ltconfig"
-+#include "confdefs.h"
-+/* Override any gcc2 internal prototype to avoid an error.  */
-+/* We use char because int might match the return type of a gcc2
-+    builtin and then its argument prototype would still apply.  */
-+char shl_load();
-+
-+int main() {
-+shl_load()
-+; return 0; }
-+EOF
-+if { (eval echo $progname:2352: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+  rm -rf conftest*
-+  eval "ac_cv_lib_$ac_lib_var=yes"
-+else
-+  echo "$progname: failed program was:" >&5
-+  cat conftest.$ac_ext >&5
-+  rm -rf conftest*
-+  eval "ac_cv_lib_$ac_lib_var=no"
-+fi
-+rm -f conftest*
-+LIBS="$ac_save_LIBS"
-+
-+fi
-+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-+  echo "$ac_t""yes" 1>&6
-+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
-+else
-+  echo "$ac_t""no" 1>&6
-+fi
-+
-+
-+fi
-+
-+    
-+fi
-+
-+  
-+fi
-+
-+
-+fi
-+
-+fi
-+
-+  if test "x$lt_cv_dlopen" != xno; then
-+    enable_dlopen=yes
-+  fi
-+
-+  case "$lt_cv_dlopen" in
-+  dlopen)
-+for ac_hdr in dlfcn.h; do
-+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-+echo "$progname:2395: checking for $ac_hdr" >&5
-+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-+  echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+  cat > conftest.$ac_ext <<EOF
-+#line 2400 "ltconfig"
-+#include <$ac_hdr>
-+int fnord = 0;
-+EOF
-+ac_try="$ac_compile conftest.$ac_ext >/dev/null 2>conftest.out"
-+{ (eval echo $progname:2405: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-+if test -z "$ac_err"; then
-+  rm -rf conftest*
-+  eval "ac_cv_header_$ac_safe=yes"
-+else
-+  echo "$ac_err" >&5
-+  echo "$progname: failed program was:" >&5
-+  cat conftest.$ac_ext >&5
-+  rm -rf conftest*
-+  eval "ac_cv_header_$ac_safe=no"
-+fi
-+rm -f conftest*
-+fi
-+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-+  echo "$ac_t""yes" 1>&6
-+else
-+  echo "$ac_t""no" 1>&6
-+fi
-+done
-+
-+    if test "x$ac_cv_header_dlfcn_h" = xyes; then
-+      CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-+    fi
-+    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-+    LIBS="$lt_cv_dlopen_libs $LIBS"
-+
-+  echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
-+echo "$progname:2433: checking whether a program can dlopen itself" >&5
-+if test "${lt_cv_dlopen_self+set}" = set; then
-+  echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+  if test "$cross_compiling" = yes; then
-+    lt_cv_dlopen_self=cross
-+  else
-+    cat > conftest.c <<EOF
-+#line 2441 "ltconfig"
-+
-+#if HAVE_DLFCN_H
-+#include <dlfcn.h>
-+#endif
-+
-+#include <stdio.h>
-+
-+#ifdef RTLD_GLOBAL
-+# define LTDL_GLOBAL   RTLD_GLOBAL
-+#else
-+# ifdef DL_GLOBAL
-+#  define LTDL_GLOBAL  DL_GLOBAL
-+# else
-+#  define LTDL_GLOBAL  0
-+# endif
-+#endif
-+
-+/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
-+   find out it does not work in some platform. */
-+#ifndef LTDL_LAZY_OR_NOW
-+# ifdef RTLD_LAZY
-+#  define LTDL_LAZY_OR_NOW     RTLD_LAZY
-+# else
-+#  ifdef DL_LAZY
-+#   define LTDL_LAZY_OR_NOW    DL_LAZY
-+#  else
-+#   ifdef RTLD_NOW
-+#    define LTDL_LAZY_OR_NOW   RTLD_NOW
-+#   else
-+#    ifdef DL_NOW
-+#     define LTDL_LAZY_OR_NOW  DL_NOW
-+#    else
-+#     define LTDL_LAZY_OR_NOW  0
-+#    endif
-+#   endif
-+#  endif
-+# endif
-+#endif
-+
-+fnord() { int i=42;}
-+main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
-+    if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
-+              if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); } 
-+
-+EOF
-+if { (eval echo $progname:2487: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
-+then
-+  lt_cv_dlopen_self=yes
-+else
-+  echo "$progname: failed program was:" >&5
-+  cat conftest.$ac_ext >&5
-+  rm -fr conftest*
-+  lt_cv_dlopen_self=no
-+fi
-+rm -fr conftest*
-+fi
-+
-+fi
-+
-+echo "$ac_t""$lt_cv_dlopen_self" 1>&6
-+
-+  if test "$lt_cv_dlopen_self" = yes; then
-+    LDFLAGS="$LDFLAGS $link_static_flag"
-+  echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
-+echo "$progname:2506: checking whether a statically linked program can dlopen itself" >&5
-+if test "${lt_cv_dlopen_self_static+set}" = set; then
-+  echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+  if test "$cross_compiling" = yes; then
-+    lt_cv_dlopen_self_static=cross
-+  else
-+    cat > conftest.c <<EOF
-+#line 2514 "ltconfig"
-+
-+#if HAVE_DLFCN_H
-+#include <dlfcn.h>
-+#endif
-+
-+#include <stdio.h>
-+
-+#ifdef RTLD_GLOBAL
-+# define LTDL_GLOBAL   RTLD_GLOBAL
-+#else
-+# ifdef DL_GLOBAL
-+#  define LTDL_GLOBAL  DL_GLOBAL
-+# else
-+#  define LTDL_GLOBAL  0
-+# endif
-+#endif
-+
-+/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
-+   find out it does not work in some platform. */
-+#ifndef LTDL_LAZY_OR_NOW
-+# ifdef RTLD_LAZY
-+#  define LTDL_LAZY_OR_NOW     RTLD_LAZY
-+# else
-+#  ifdef DL_LAZY
-+#   define LTDL_LAZY_OR_NOW    DL_LAZY
-+#  else
-+#   ifdef RTLD_NOW
-+#    define LTDL_LAZY_OR_NOW   RTLD_NOW
-+#   else
-+#    ifdef DL_NOW
-+#     define LTDL_LAZY_OR_NOW  DL_NOW
-+#    else
-+#     define LTDL_LAZY_OR_NOW  0
-+#    endif
-+#   endif
-+#  endif
-+# endif
-+#endif
-+
-+fnord() { int i=42;}
-+main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
-+    if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
-+    if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); } 
-+
-+EOF
-+if { (eval echo $progname:2560: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
-+then
-+  lt_cv_dlopen_self_static=yes
-+else
-+  echo "$progname: failed program was:" >&5
-+  cat conftest.$ac_ext >&5
-+  rm -fr conftest*
-+  lt_cv_dlopen_self_static=no
-+fi
-+rm -fr conftest*
-+fi
-+
-+fi
-+
-+echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
-+fi
-+    ;;
-+  esac
-+
-+  case "$lt_cv_dlopen_self" in
-+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-+  *) enable_dlopen_self=unknown ;;
-+  esac
-+
-+  case "$lt_cv_dlopen_self_static" in
-+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-+  *) enable_dlopen_self_static=unknown ;;
-+  esac
-+fi
-+
-+# Copy echo and quote the copy, instead of the original, because it is
-+# used later.
-+ltecho="$echo"
-+if test "X$ltecho" = "X$CONFIG_SHELL $0 --fallback-echo"; then
-+   ltecho="$CONFIG_SHELL \$0 --fallback-echo"
-+fi
-+LTSHELL="$SHELL"
-+
-+LTCONFIG_VERSION="$VERSION"
-+
-+# Only quote variables if we're using ltmain.sh.
-+case "$ltmain" in
-+*.sh)
-+  # Now quote all the things that may contain metacharacters.
-+  for var in ltecho old_CC old_CFLAGS old_CPPFLAGS \
-+    old_LD old_LDFLAGS old_LIBS \
-+    old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS \
-+    AR CC LD LN_S NM LTSHELL LTCONFIG_VERSION \
-+    reload_flag reload_cmds wl \
-+    pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
-+    thread_safe_flag_spec whole_archive_flag_spec libname_spec \
-+    library_names_spec soname_spec \
-+    RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
-+    old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds postuninstall_cmds \
-+    file_magic_cmd export_symbols_cmds deplibs_check_method allow_undefined_flag no_undefined_flag \
-+    finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
-+    hardcode_libdir_flag_spec hardcode_libdir_separator  \
-+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+    compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
-+
-+    case "$var" in
-+    reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
-+    old_postinstall_cmds | old_postuninstall_cmds | \
-+    export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
-+    postinstall_cmds | postuninstall_cmds | \
-+    finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+      # Double-quote double-evaled strings.
-+      eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+      ;;
-+    *)
-+      eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+      ;;
-+    esac
-+  done
-+
-+  case "$ltecho" in
-+  *'\$0 --fallback-echo"')
-+    ltecho=`$echo "X$ltecho" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+    ;;
-+  esac
-+
-+  trap "$rm \"$ofile\"; exit 1" 1 2 15
-+  echo "creating $ofile"
-+  $rm "$ofile"
-+  cat <<EOF > "$ofile"
-+#! $SHELL
-+
-+# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-+# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh.
-+#
-+# Copyright (C) 1996-1999 Free Software Foundation, Inc.
-+# Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-+#
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2 of the License, or
-+# (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful, but
-+# WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+# General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+#
-+# As a special exception to the GNU General Public License, if you
-+# distribute this file as part of a program that contains a
-+# configuration script generated by Autoconf, you may include it under
-+# the same distribution terms that you use for the rest of that program.
-+
-+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-+Xsed="sed -e s/^X//"
-+
-+# The HP-UX ksh and POSIX shell print the target directory to stdout
-+# if CDPATH is set.
-+if test "\${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi
-+
-+### BEGIN LIBTOOL CONFIG
-+EOF
-+  cfgfile="$ofile"
-+  ;;
-+
-+*)
-+  # Double-quote the variables that need it (for aesthetics).
-+  for var in old_CC old_CFLAGS old_CPPFLAGS \
-+    old_LD old_LDFLAGS old_LIBS \
-+    old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS; do
-+    eval "$var=\\\"\$var\\\""
-+  done
-+
-+  # Just create a config file.
-+  cfgfile="$ofile.cfg"
-+  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-+  echo "creating $cfgfile"
-+  $rm "$cfgfile"
-+  cat <<EOF > "$cfgfile"
-+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Libtool configuration file.
-+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-+EOF
-+  ;;
-+esac
-+
-+cat <<EOF >> "$cfgfile"
-+# Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+#
-+# CC=$old_CC CFLAGS=$old_CFLAGS CPPFLAGS=$old_CPPFLAGS \\
-+# LD=$old_LD LDFLAGS=$old_LDFLAGS LIBS=$old_LIBS \\
-+# NM=$old_NM RANLIB=$old_RANLIB LN_S=$old_LN_S \\
-+# DLLTOOL=$old_DLLTOOL OBJDUMP=$old_OBJDUMP AS=$old_AS \\
-+#   $0$ltconfig_args
-+#
-+# Compiler and other test output produced by $progname, useful for
-+# debugging $progname, is in ./config.log if it exists.
-+
-+# The version of $progname that generated this script.
-+LTCONFIG_VERSION=$LTCONFIG_VERSION
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$LTSHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+
-+# An echo program that does not interpret backslashes.
-+echo=$ltecho
-+
-+# The archiver.
-+AR=$AR
-+
-+# The default C compiler.
-+CC=$CC
-+
-+# The linker used to build libraries.
-+LD=$LD
-+
-+# Whether we need hard or soft links.
-+LN_S=$LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$NM
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$reload_flag
-+reload_cmds=$reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$wl
-+
-+# Object file suffix (normally "o").
-+objext="$objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$pic_flag
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$compiler_c_o
-+
-+# Can we write directly to a .lo ?
-+compiler_o_lo=$compiler_o_lo
-+
-+# Must we lock files when doing compilation ?
-+need_locks=$need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$link_static_flag
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$no_builtin_flag
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$export_dynamic_flag_spec
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$whole_archive_flag_spec
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$thread_safe_flag_spec
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$libname_spec
-+
-+# List of archive names.  First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$RANLIB
-+old_archive_cmds=$old_archive_cmds
-+old_postinstall_cmds=$old_postinstall_cmds
-+old_postuninstall_cmds=$old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$old_archive_from_new_cmds
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$archive_cmds
-+archive_expsym_cmds=$archive_expsym_cmds
-+postinstall_cmds=$postinstall_cmds
-+postuninstall_cmds=$postuninstall_cmds
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$allow_undefined_flag
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$no_undefined_flag
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$global_symbol_to_cdecl
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$hardcode_libdir_flag_spec
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$hardcode_libdir_separator
-+
-+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path="$fix_srcfile_path"
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$export_symbols_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$exclude_expsyms
-+
-+# Symbols that must always be exported.
-+include_expsyms=$include_expsyms
-+
-+EOF
-+
-+case "$ltmain" in
-+*.sh)
-+  echo '### END LIBTOOL CONFIG' >> "$ofile"
-+  echo >> "$ofile"
-+  case "$host_os" in
-+  aix3*)
-+    cat <<\EOF >> "$ofile"
-+
-+# AIX sometimes has problems with the GCC collect2 program.  For some
-+# reason, if we set the COLLECT_NAMES environment variable, the problems
-+# vanish in a puff of smoke.
-+if test "${COLLECT_NAMES+set}" != set; then
-+  COLLECT_NAMES=
-+  export COLLECT_NAMES
-+fi
-+EOF
-+    ;;
-+  esac
-+
-+  # Append the ltmain.sh script.
-+  sed '$q' "$ltmain" >> "$ofile" || (rm -f "$ofile"; exit 1)
-+
-+  chmod +x "$ofile"
-+  ;;
-+
-+*)
-+  # Compile the libtool program.
-+  echo "FIXME: would compile $ltmain"
-+  ;;
-+esac
-+
-+test -n "$cache_file" || exit 0
-+
-+# AC_CACHE_SAVE
-+trap '' 1 2 15
-+cat > confcache <<\EOF
-+# This file is a shell script that caches the results of configure
-+# tests run on this system so they can be shared between configure
-+# scripts and configure runs.  It is not useful on other systems.
-+# If it contains results you don't want to keep, you may remove or edit it.
-+#
-+# By default, configure uses ./config.cache as the cache file,
-+# creating it if it does not exist already.  You can give configure
-+# the --cache-file=FILE option to use a different cache file; that is
-+# what configure does when it calls configure scripts in
-+# subdirectories, so they share the cache.
-+# Giving --cache-file=/dev/null disables caching, for debugging configure.
-+# config.status only pays attention to the cache file if you give it the
-+# --recheck option to rerun configure.
-+#
-+EOF
-+# The following way of writing the cache mishandles newlines in values,
-+# but we know of no workaround that is simple, portable, and efficient.
-+# So, don't put newlines in cache variables' values.
-+# Ultrix sh set writes to stderr and can't be redirected directly,
-+# and sets the high bit in the cache file unless we assign to the vars.
-+(set) 2>&1 |
-+  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-+  *ac_space=\ *)
-+    # `set' does not quote correctly, so add quotes (double-quote substitution
-+    # turns \\\\ into \\, and sed turns \\ into \).
-+    sed -n \
-+      -e "s/'/'\\\\''/g" \
-+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-+    ;;
-+  *)
-+    # `set' quotes correctly as required by POSIX, so do not add quotes.
-+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-+    ;;
-+  esac >> confcache
-+if cmp -s $cache_file confcache; then
-+  :
-+else
-+  if test -w $cache_file; then
-+    echo "updating cache $cache_file"
-+    cat confcache > $cache_file
-+  else
-+    echo "not updating unwritable cache $cache_file"
-+  fi
-+fi
-+rm -f confcache
-+
-+exit 0
-+
-+# Local Variables:
-+# mode:shell-script
-+# sh-indentation:2
-+# End:
diff --git a/meta/packages/jpeg/jpeg-6b/libtool_tweak.patch b/meta/packages/jpeg/jpeg-6b/libtool_tweak.patch
new file mode 100644
index 0000000000..d61476adc0
--- /dev/null
+++ b/meta/packages/jpeg/jpeg-6b/libtool_tweak.patch
@@ -0,0 +1,52 @@
+Index: jpeg-6b/configure
+===================================================================
+--- jpeg-6b.orig/configure      2008-05-07 15:53:15.000000000 +0100
++++ jpeg-6b/configure   2008-05-07 15:54:40.000000000 +0100
+@@ -1532,7 +1532,7 @@
+   LIBTOOL="./libtool"
+   O="lo"
+   A="la"
+-  LN='$(LIBTOOL) --mode=link $(CC)'
++  LN='$(LIBTOOL) --tag=CC --mode=link $(CC)'
+   INSTALL_LIB='$(LIBTOOL) --mode=install ${INSTALL}'
+   INSTALL_PROGRAM="\$(LIBTOOL) --mode=install $INSTALL_PROGRAM"
+ else
+@@ -1559,7 +1559,6 @@
+   if test "x$LTSTATIC" = xno; then
+     disable_static="--disable-static"
+   fi
+-  $srcdir/ltconfig $disable_shared $disable_static $srcdir/ltmain.sh
+ fi
+ 
+ # Select memory manager depending on user input.
+Index: jpeg-6b/makefile.cfg
+===================================================================
+--- jpeg-6b.orig/makefile.cfg   2008-05-07 15:53:24.000000000 +0100
++++ jpeg-6b/makefile.cfg        2008-05-07 15:56:22.000000000 +0100
+@@ -141,7 +141,7 @@
+ 
+ # How to compile with libtool.
+ @COM_LT@.c.lo:
+-@COM_LT@       $(LIBTOOL) --mode=compile $(CC) $(CFLAGS) -c $(srcdir)/$*.c
++@COM_LT@       $(LIBTOOL) --tag=CC --mode=compile $(CC) $(CFLAGS) -c $(srcdir)/$*.c
+ 
+ # How to use ansi2knr, when not using libtool.
+ @COM_A2K@.c.o:
+@@ -152,7 +152,7 @@
+ # How to use ansi2knr AND libtool.
+ @COM_A2K@.c.lo:
+ @COM_A2K@      ./ansi2knr $(srcdir)/$*.c knr/$*.c
+-@COM_A2K@      $(LIBTOOL) --mode=compile $(CC) $(CFLAGS) -c knr/$*.c
++@COM_A2K@      $(LIBTOOL) --tag=CC --mode=compile $(CC) $(CFLAGS) -c knr/$*.c
+ @COM_A2K@      $(RM) knr/$*.c
+ 
+ ansi2knr: ansi2knr.c
+@@ -169,7 +169,7 @@
+ 
+ # with libtool:
+ libjpeg.la: @A2K_DEPS@ $(LIBOBJECTS)
+-       $(LIBTOOL) --mode=link $(CC) -o libjpeg.la $(LIBOBJECTS) \
++       $(LIBTOOL) --tag=CC --mode=link $(CC) -o libjpeg.la $(LIBOBJECTS) \
+                -rpath $(libdir) -version-info $(JPEG_LIB_VERSION) $(LDFLAGS)
+ 
+ # sample programs:
diff --git a/meta/packages/jpeg/jpeg_6b.bb b/meta/packages/jpeg/jpeg_6b.bb
index 978ae10be5..b930870bc6 100644
--- a/meta/packages/jpeg/jpeg_6b.bb
+++ b/meta/packages/jpeg/jpeg_6b.bb
@@ -5,12 +5,13 @@ PRIORITY = "required"
 
 DEPENDS = "libtool-cross"
 
-PR = "r5"
+PR = "r6"
 
 SRC_URI = "http://www.ijg.org/files/jpegsrc.v${PV}.tar.gz \
            file://debian.patch;patch=1 \
            file://ldflags.patch;patch=1 \
-           file://paths.patch;patch=1"
+           file://paths.patch;patch=1 \
+           file://libtool_tweak.patch;patch=1"
 S = "${WORKDIR}/jpeg-${PV}"
 
 inherit autotools 
@@ -20,6 +21,11 @@ EXTRA_OEMAKE='"LIBTOOL=${STAGING_BINDIR_NATIVE}/${HOST_SYS}-libtool"'
 
 CFLAGS_append = " -D_REENTRANT"
 
+do_configure_prepend () {
+        rm -f ${S}/ltconfig
+        rm -f ${S}/ltmain.sh
+}
+
 do_stage() {
         install -m 644 jconfig.h ${STAGING_INCDIR}/jconfig.h
         install -m 644 jpeglib.h ${STAGING_INCDIR}/jpeglib.h