Sync conf and classes with OE - changes have been tested and don't affect poky

git-svn-id: https://svn.o-hand.com/repos/poky/trunk@446 311d38ba-8fff-0310-9ca6-ca027cbcb966

6 files changed, 16 insertions, 16 deletions

diff --git a/openembedded/conf/machine/include/ixp4xx.conf b/openembedded/conf/machine/include/ixp4xx.conf
index 639bf4a74e..93befb92ce 100644
--- a/openembedded/conf/machine/include/ixp4xx.conf
+++ b/openembedded/conf/machine/include/ixp4xx.conf
@@ -62,7 +62,7 @@ IXP4XX_SUFFIX = "${MACHINE_ARCH}"
 #    arm/thumb interworking are enabled in the inputs.
 OVERRIDE_THUMB = "${@['', ':thumb'][bb.data.getVar('ARM_INSTRUCTION_SET', d, 1) == 'thumb']}"
 OVERRIDE_INTERWORK = "${@['', ':thumb-interwork'][bb.data.getVar('THUMB_INTERWORK', d, 1) == 'yes']}"
-OVERRIDES = "local:${MACHINE}:ixp4xx:${DISTRO}${DISTRO_BASE}:${TARGET_OS}:${TARGET_ARCH}${OVERRIDE_THUMB}${OVERRIDE_INTERWORK}:build-${BUILD_OS}"
+OVERRIDES = "local:${MACHINE}:ixp4xx:${DISTRO}${DISTRO_BASE}:${TARGET_OS}:${TARGET_ARCH}${OVERRIDE_THUMB}${OVERRIDE_INTERWORK}:build-${BUILD_OS}:fail-fast"
 
 # TARGET_CC_ARCH
 # TARGET_CC_KERNEL_ARCH
@@ -111,7 +111,7 @@ TARGET_PACKAGE_ARCH = "${TARGET_PACKAGE_ARCH_BASE}${BYTE_SEX_CHAR}"
 #    because everything built here is no more specific than that.
 MACHINE_ARCH = "ixp4xx${ARCH_BYTE_SEX}"
 
-# IPKG_ARCHS
+# IPKG_EXTRA_ARCHS
 #    The full list of package architectures which should run on the system.
 #    This takes into account both the board level issues and the INPUTS set
 #    by the distro.  The arm list is derived from the architecture settings
@@ -126,12 +126,12 @@ THUMB_ARCHITECTURES = "thumbe${BYTE_SEX_CHAR} thumbv4t${BYTE_SEX_CHAR} thumbv5t$
 #    NOTE: this list contains just the things which rootfs_ipk.bbclass does
 #    not add, rootfs_ipk.bbclass evaluates:
 #
-#        ipkgarchs="all any noarch ${TARGET_ARCH} ${IPKG_ARCHS} ${MACHINE}"
+#        ipkgarchs="all any noarch ${TARGET_ARCH} ${IPKG_EXTRA_ARCHS} ${MACHINE}"
 #
 #    This is a priority ordered list - most desireable architecture at the end,
 #    so put <ARM_INSTRUCTION_SET>_ARCHITECTURES at the end and, if
 #    THUMB_INTERWORK precede this with the other architectures.
-IPKG_ARCHS = "ixp4xx ${MACHINE} \
+IPKG_EXTRA_ARCHS = "ixp4xx ${MACHINE} \
                 ${@(lambda arch_thumb, arch_arm, is_arm, interwork: \
                 (interwork and (is_arm and arch_thumb or arch_arm) + ' ' or '') \
                 + '${TARGET_ARCH} ' + (is_arm and arch_arm or arch_thumb)) \
@@ -146,7 +146,7 @@ IPKG_ARCHS = "ixp4xx ${MACHINE} \
 #    the removal of the raw "${MACHINE}" from the end of the list.  ${MACHINE} and
 #    ixp4xx are included at the start (lower priority) as the non-byte-sex specific
 #    versions.
-IPKG_ARCH_LIST = "all any noarch ixp4xx ${MACHINE} ${IPKG_ARCHS}"
+IPKG_ARCH_LIST = "all any noarch ixp4xx ${MACHINE} ${IPKG_EXTRA_ARCHS}"
 
 #-------------------------------------------------------------------------------
 # Package versions
diff --git a/openembedded/conf/machine/include/zaurus-clamshell.conf b/openembedded/conf/machine/include/zaurus-clamshell.conf
index e437a64609..4fd1780605 100644
--- a/openembedded/conf/machine/include/zaurus-clamshell.conf
+++ b/openembedded/conf/machine/include/zaurus-clamshell.conf
@@ -1,5 +1,5 @@
 TARGET_ARCH = "arm"
-IPKG_ARCHS = "all arm armv4 armv5te"
+IPKG_EXTRA_ARCHS = "armv4 armv5te"
 
 PREFERRED_PROVIDER_xserver = "xserver-kdrive"
 
@@ -11,6 +11,11 @@ IMAGE_CMD_jffs2 = "mkfs.jffs2 --root=${IMAGE_ROOTFS} --faketime \
                    cat ${STAGING_LIBDIR}/sharp-flash-header/header-c700.bin \
                    ${T}/${IMAGE_NAME}.rootfs.jffs2 > ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.img"
 
+# add a summary to the jffs2 file to make it mount a lot faster
+EXTRA_IMAGECMD_jffs2 += "&& sumtool -i ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.img \
+                          -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs-summary.img \
+                          --eraseblock=0x4000"
+
 GUI_MACHINE_CLASS = "bigscreen"
 GPE_EXTRA_INSTALL += "gaim sylpheed"
 
diff --git a/openembedded/conf/machine/ipaq-pxa270.conf b/openembedded/conf/machine/ipaq-pxa270.conf
index 07753ccf64..f5cc893c9c 100644
--- a/openembedded/conf/machine/ipaq-pxa270.conf
+++ b/openembedded/conf/machine/ipaq-pxa270.conf
@@ -3,7 +3,7 @@
 #@DESCRIPTION: Machine configuration for the iPAQ with a pxa27x CPU  devices
 
 TARGET_ARCH = "arm"
-IPKG_ARCHS = "all arm armv4 armv5te ipaqpxa hx4700"
+IPKG_EXTRA_ARCHS = "armv4 armv5te ipaqpxa hx4700"
 #use this for a hx47xx ipaq
 PREFERRED_PROVIDER_virtual/kernel = "handhelds-pxa-2.6"
 
diff --git a/openembedded/conf/machine/jornada7xx.conf b/openembedded/conf/machine/jornada7xx.conf
index 82eff0b563..e8218138d5 100644
--- a/openembedded/conf/machine/jornada7xx.conf
+++ b/openembedded/conf/machine/jornada7xx.conf
@@ -3,6 +3,5 @@
 #@DESCRIPTION: Machine configuration for the SA1100 based HP Jornada 7xx palmtop computer
 
 TARGET_ARCH = "arm"
-IPKG_ARCHS = "all arm ${MACHINE}"
 
 include conf/machine/include/tune-strongarm.conf
\ No newline at end of file
diff --git a/openembedded/conf/machine/nokia770.conf b/openembedded/conf/machine/nokia770.conf
index dd2127610a..c50c1a1bc8 100644
--- a/openembedded/conf/machine/nokia770.conf
+++ b/openembedded/conf/machine/nokia770.conf
@@ -2,11 +2,11 @@
 #@NAME: Nokia 770 internet tablet
 #@DESCRIPTION: Machine configuration for the Nokia 770, an omap 1710 based tablet
 TARGET_ARCH = "arm"
-IPKG_ARCHS = "all arm armv4 armv5te ${MACHINE}"
+IPKG_EXTRA_ARCHS = "armv4 armv5te"
 
 PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive-omap"
 PREFERRED_PROVIDER_virtual/bootloader = ""
-PREFERRED_PROVIDER_virutal/tslib = "tslib-maemo"
+PREFERRED_PROVIDER_tslib = "tslib-maemo"
 
 XSERVER = "xserver-kdrive-omap"
 
@@ -20,15 +20,11 @@ include conf/machine/include/tune-arm926ejs.conf
 
 #size of the root partition (yes, it is 123 MB)
 ROOT_FLASH_SIZE = "123"
-#EXTRA_IMAGECMD_jffs2_nokia770 = "--pad --little-endian --eraseblock=0x20000 --no-cleanmarkers"
-EXTRA_IMAGECMD_jffs2_nokia770 = "--pad --little-endian --eraseblock=0x20000 -n "
+EXTRA_IMAGECMD_jffs2_nokia770 = "--pad --little-endian --eraseblock=0x20000"
 
 # serial console port on devboard rev. B3
-#SERIAL_CONSOLE = "115200 tts/0"
 SERIAL_CONSOLE = "115200 ttyS0"
 
-
-#build omap1 till nokia releases the patches
 PREFERRED_PROVIDER_virtual/kernel = "linux-nokia770"
 
 BOOTSTRAP_EXTRA_RDEPENDS += "sysfsutils  nokia770-init detect-stylus \
diff --git a/openembedded/conf/machine/qemuarm.conf b/openembedded/conf/machine/qemuarm.conf
index 78b1fe33fc..3341efd1a7 100644
--- a/openembedded/conf/machine/qemuarm.conf
+++ b/openembedded/conf/machine/qemuarm.conf
@@ -3,7 +3,7 @@
 #@DESCRIPTION: Machine configuration for running an ARM system under qemu emulation
 
 TARGET_ARCH = "arm"
-IPKG_ARCHS = "all arm armv4 armv5te qemuarm"
+IPKG_EXTRA_ARCHS = "armv4 armv5te"
 
 PCMCIA_MANAGER = "pcmciautils"
 PREFERRED_PROVIDER_xserver = "xserver-kdrive"