Cleanup rootfs_rpm,package_rpm bbclass files

This commit cleans up the functions that were ported to python.

(From OE-Core rev: a4fe5263a683b73d0318fe3c0c55382c084f25b5)

Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

1 files changed, 0 insertions, 472 deletions

diff --git a/meta/classes/package_rpm.bbclass b/meta/classes/package_rpm.bbclass
index e9a6ac8770..4d33d01835 100644
--- a/meta/classes/package_rpm.bbclass
+++ b/meta/classes/package_rpm.bbclass
@@ -12,478 +12,6 @@ PKGWRITEDIRSRPM = "${DEPLOY_DIR}/sources/deploy-srpm"
 # packages. When set, this value merges them for efficiency.
 MERGEPERFILEDEPS = "1"
 
-#
-# Update the packages indexes ${DEPLOY_DIR_RPM}
-#
-package_update_index_rpm () {
-        if [ ! -z "${DEPLOY_KEEP_PACKAGES}" ]; then
-                return
-        fi
-
-        sdk_archs=`echo "${SDK_PACKAGE_ARCHS}" | tr - _`
-
-        target_archs=""
-        for i in ${MULTILIB_PREFIX_LIST} ; do
-                old_IFS="$IFS"
-                IFS=":"
-                set $i
-                IFS="$old_IFS"
-                shift # remove mlib
-                while [ -n "$1" ]; do
-                        target_archs="$target_archs $1"
-                        shift
-                done
-        done
-
-        # FIXME stopgap for broken "bitbake package-index" since MULTILIB_PREFIX_LIST isn't set for that
-        if [ "$target_archs" = "" ] ; then
-                target_archs="${ALL_MULTILIB_PACKAGE_ARCHS}"
-        fi
-
-        target_archs=`echo "$target_archs" | tr - _`
-
-        archs=`for arch in $target_archs $sdk_archs ; do
-                echo $arch
-        done | sort | uniq`
-
-        found=0
-        for arch in $archs; do
-                if [ -d ${DEPLOY_DIR_RPM}/$arch ] ; then
-                        createrepo --update -q ${DEPLOY_DIR_RPM}/$arch
-                        found=1
-                fi
-        done
-        if [ "$found" != "1" ]; then
-                bbfatal "There are no packages in ${DEPLOY_DIR_RPM}!"
-        fi
-}
-
-rpm_log_check() {
-        target="$1"
-        lf_path="$2"
-
-        lf_txt="`cat $lf_path`"
-        for keyword_die in "unpacking of archive failed" "Cannot find package" "exit 1" ERR Fail
-        do
-                if (echo "$lf_txt" | grep -v log_check | grep "\<$keyword_die\>") >/dev/null 2>&1
-                then
-                        echo "log_check: There were error messages in the logfile"
-                        printf "log_check: Matched keyword: [$keyword_die]\n\n"
-                        echo "$lf_txt" | grep -v log_check | grep -C 5 -i "$keyword_die"
-                        echo ""
-                        do_exit=1
-                fi
-        done
-        test "$do_exit" = 1 && exit 1
-        true
-}
-
-# Translate the RPM/Smart format names to the OE multilib format names
-# Input via stdin (only the first item per line is converted!)
-# Output via stdout
-translate_smart_to_oe() {
-        arg1="$1"
-
-        # Dump installed packages
-        while read pkg arch other ; do
-                found=0
-                if [ -z "$pkg" ]; then
-                        continue
-                fi
-                new_pkg=$pkg
-                fixed_arch=`echo "$arch" | tr _ -`
-                for i in ${MULTILIB_PREFIX_LIST} ; do
-                        old_IFS="$IFS"
-                        IFS=":"
-                        set $i
-                        IFS="$old_IFS"
-                        mlib="$1"
-                        shift
-                        while [ -n "$1" ]; do
-                                cmp_arch=$1
-                                shift
-                                fixed_cmp_arch=`echo "$cmp_arch" | tr _ -`
-                                if [ "$fixed_arch" = "$fixed_cmp_arch" ]; then
-                                        if [ "$mlib" = "default" ]; then
-                                                new_pkg="$pkg"
-                                                new_arch=$cmp_arch
-                                        else
-                                                new_pkg="$mlib-$pkg"
-                                                # We need to strip off the ${mlib}_ prefix on the arch
-                                                new_arch=${cmp_arch#${mlib}_}
-                                        fi
-                                        # Workaround for bug 3565
-                                        # Simply look to see if we know of a package with that name, if not try again!
-                                        filename=`ls ${PKGDATA_DIR}/runtime-reverse/$new_pkg 2>/dev/null | head -n 1`
-                                        if [ -n "$filename" ] ; then
-                                                found=1
-                                                break
-                                        fi
-                                        # 'real' code
-                                        # found=1
-                                        # break
-                                fi
-                        done
-                        if [ "$found" = "1" ] && [ "$fixed_arch" = "$fixed_cmp_arch" ]; then
-                                break
-                        fi
-                done
-
-                #echo "$pkg -> $new_pkg" >&2
-                if [ "$arg1" = "arch" ]; then
-                        echo $new_pkg $new_arch $other
-                elif [ "$arg1" = "file" ]; then
-                        echo $new_pkg $other $new_arch
-                else
-                        echo $new_pkg $other
-                fi
-        done
-}               
-
-# Translate the OE multilib format names to the RPM/Smart format names
-# Input via arguments
-# Ouput via pkgs_to_install
-translate_oe_to_smart() {
-        default_archs=""
-        sdk_mode=""
-        if [ "$1" = "--sdk" ]; then
-                shift
-                sdk_mode="true"
-                # Need to reverse the order of the SDK_ARCHS highest -> lowest priority
-                archs=`echo "${SDK_PACKAGE_ARCHS}" | tr - _`
-                for arch in $archs ; do
-                        default_archs="$arch $default_archs"
-                done
-        fi
-
-        attemptonly="Error"
-        if [ "$1" = "--attemptonly" ]; then
-                attemptonly="Warning"
-                shift
-        fi
-
-        # Dump a list of all available packages
-        [ ! -e ${target_rootfs}/install/tmp/fullpkglist.query ] && smart --data-dir=${target_rootfs}/var/lib/smart query --output ${target_rootfs}/install/tmp/fullpkglist.query
-
-        pkgs_to_install=""
-        for pkg in "$@" ; do
-                new_pkg="$pkg"
-                if [ -z "$sdk_mode" ]; then
-                        for i in ${MULTILIB_PREFIX_LIST} ; do
-                                old_IFS="$IFS"
-                                IFS=":"
-                                set $i
-                                IFS="$old_IFS"
-                                mlib="$1"
-                                shift
-                                if [ "$mlib" = "default" ]; then
-                                        if [ -z "$default_archs" ]; then
-                                                default_archs=$@
-                                        fi
-                                        continue
-                                fi
-                                subst=${pkg#${mlib}-}
-                                if [ "$subst" != "$pkg" ]; then
-                                        feeds=$@
-                                        while [ -n "$1" ]; do
-                                                arch="$1"
-                                                arch=`echo "$arch" | tr - _`
-                                                shift
-                                                if grep -q '^'$subst'-[^-]*-[^-]*@'$arch'$' ${target_rootfs}/install/tmp/fullpkglist.query ; then
-                                                        new_pkg="$subst@$arch"
-                                                        # First found is best match
-                                                        break
-                                                fi
-                                        done
-                                        if [ "$pkg" = "$new_pkg" ]; then
-                                                # Failed to translate, package not found!
-                                                echo "$attemptonly: $pkg not found in the $mlib feeds ($feeds)." >&2
-                                                if [ "$attemptonly" = "Error" ]; then
-                                                        exit 1
-                                                fi
-                                                continue
-                                        fi
-                                fi
-                        done
-                fi
-                # Apparently not a multilib package...
-                if [ "$pkg" = "$new_pkg" ]; then
-                        default_archs_fixed=`echo "$default_archs" | tr - _`
-                        for arch in $default_archs_fixed ; do
-                                if grep -q '^'$pkg'-[^-]*-[^-]*@'$arch'$' ${target_rootfs}/install/tmp/fullpkglist.query ; then
-                                        new_pkg="$pkg@$arch"
-                                        # First found is best match
-                                        break
-                                fi
-                        done
-                        if [ "$pkg" = "$new_pkg" ]; then
-                                # Failed to translate, package not found!
-                                echo "$attemptonly: $pkg not found in the base feeds ($default_archs)." >&2
-                                if [ "$attemptonly" = "Error" ]; then
-                                        exit 1
-                                fi
-                                continue
-                        fi
-                fi
-                #echo "$pkg -> $new_pkg" >&2
-                pkgs_to_install="${pkgs_to_install} ${new_pkg}"
-        done
-        export pkgs_to_install
-}
-
-package_write_smart_config() {
-        # Write common configuration for host and target usage
-        smart --data-dir=$1/var/lib/smart config --set rpm-nolinktos=1
-        smart --data-dir=$1/var/lib/smart config --set rpm-noparentdirs=1
-        for i in ${BAD_RECOMMENDATIONS}; do
-                smart --data-dir=$1/var/lib/smart flag --set ignore-recommends $i
-        done
-}
-
-#
-# Install a bunch of packages using rpm.
-# There are two solutions in an image's FRESH generation:
-# 1) main package solution
-# 2) complementary solution
-#
-# It is different when incremental image generation is enabled:
-# 1) The incremental image generation takes action during the main package
-#    installation, the previous installed complementary packages would
-#    usually be removed here, and the new complementary ones would be
-#    installed in the next step.
-# 2) The complementary would always be installed since it is
-#    generated based on the first step's image.
-#
-# the following shell variables needs to be set before calling this func:
-# INSTALL_ROOTFS_RPM - install root dir
-# INSTALL_PLATFORM_RPM - main platform
-# INSTALL_PLATFORM_EXTRA_RPM - extra platform
-# INSTALL_PACKAGES_RPM - packages to be installed
-# INSTALL_PACKAGES_ATTEMPTONLY_RPM - packages attemped to be installed only
-# INSTALL_PACKAGES_LINGUAS_RPM - additional packages for uclibc
-# INSTALL_PROVIDENAME_RPM - content for provide name
-# INSTALL_TASK_RPM - task name
-# INSTALL_COMPLEMENTARY_RPM - 1 to enable complementary package install mode
-
-package_install_internal_rpm () {
-
-        local target_rootfs="$INSTALL_ROOTFS_RPM"
-        local package_to_install="$INSTALL_PACKAGES_RPM"
-        local package_attemptonly="$INSTALL_PACKAGES_ATTEMPTONLY_RPM"
-        local package_linguas="$INSTALL_PACKAGES_LINGUAS_RPM"
-        local providename="$INSTALL_PROVIDENAME_RPM"
-        local task="$INSTALL_TASK_RPM"
-
-        local sdk_mode=""
-        if [ "$1" = "--sdk" ]; then
-                sdk_mode="--sdk"
-        fi
-
-        # Configure internal RPM environment when using Smart
-        export RPM_ETCRPM=${target_rootfs}/etc/rpm
-
-        # Setup temporary directory -- install...
-        rm -rf ${target_rootfs}/install
-        mkdir -p ${target_rootfs}/install/tmp
-
-        channel_priority=5
-        if [ "${INSTALL_COMPLEMENTARY_RPM}" != "1" ] ; then
-                # Setup base system configuration
-                echo "Note: configuring RPM platform settings"
-                mkdir -p ${target_rootfs}/etc/rpm/
-                echo "$INSTALL_PLATFORM_RPM" > ${target_rootfs}/etc/rpm/platform
-
-                if [ ! -z "$INSTALL_PLATFORM_EXTRA_RPM" ]; then
-                        for pt in $INSTALL_PLATFORM_EXTRA_RPM ; do
-                                channel_priority=$(expr $channel_priority + 5)
-                                pt=$(echo $pt | sed "s,-linux.*$,-linux\.*,")
-                                echo "$pt" >> ${target_rootfs}/etc/rpm/platform
-                        done
-                fi
-
-                # Tell RPM that the "/" directory exist and is available
-                echo "Note: configuring RPM system provides"
-                mkdir -p ${target_rootfs}/etc/rpm/sysinfo
-                echo "/" >${target_rootfs}/etc/rpm/sysinfo/Dirnames
-
-                if [ ! -z "$providename" ]; then
-                        cat /dev/null > ${target_rootfs}/etc/rpm/sysinfo/Providename
-                        for provide in $providename ; do
-                                echo $provide >> ${target_rootfs}/etc/rpm/sysinfo/Providename
-                        done
-                fi
-
-                # Configure RPM... we enforce these settings!
-                echo "Note: configuring RPM DB settings"
-                mkdir -p ${target_rootfs}${rpmlibdir}
-                mkdir -p ${target_rootfs}${rpmlibdir}/log
-                # After change the __db.* cache size, log file will not be generated automatically,
-                # that will raise some warnings, so touch a bare log for rpm write into it.
-                touch ${target_rootfs}${rpmlibdir}/log/log.0000000001
-                if [ ! -e ${target_rootfs}${rpmlibdir}/DB_CONFIG ]; then
-                        cat > ${target_rootfs}${rpmlibdir}/DB_CONFIG << EOF
-# ================ Environment
-set_data_dir .
-set_create_dir .
-set_lg_dir ./log
-set_tmp_dir ./tmp
-set_flags db_log_autoremove on
-
-# -- thread_count must be >= 8
-set_thread_count 64
-
-# ================ Logging
-
-# ================ Memory Pool
-set_cachesize 0 1048576 0
-set_mp_mmapsize 268435456
-
-# ================ Locking
-set_lk_max_locks 16384
-set_lk_max_lockers 16384
-set_lk_max_objects 16384
- mutex_set_max 163840
-
-# ================ Replication
-EOF
-                fi
-
-                # Create database so that smart doesn't complain (lazy init)
-                rpm --root $target_rootfs --dbpath /var/lib/rpm -qa > /dev/null
-
-                # Configure smart
-                echo "Note: configuring Smart settings"
-                rm -rf ${target_rootfs}/var/lib/smart
-                smart --data-dir=${target_rootfs}/var/lib/smart config --set rpm-root=${target_rootfs}
-                smart --data-dir=${target_rootfs}/var/lib/smart config --set rpm-dbpath=${rpmlibdir}
-                smart --data-dir=${target_rootfs}/var/lib/smart config --set rpm-extra-macros._var=${localstatedir}
-                smart --data-dir=${target_rootfs}/var/lib/smart config --set rpm-extra-macros._tmppath=/install/tmp
-                package_write_smart_config ${target_rootfs}
-                # Do the following configurations here, to avoid them being saved for field upgrade
-                if [ "x${NO_RECOMMENDATIONS}" = "x1" ]; then
-                        smart --data-dir=${target_rootfs}/var/lib/smart config --set ignore-all-recommends=1
-                fi
-                for i in ${PACKAGE_EXCLUDE}; do
-                        smart --data-dir=${target_rootfs}/var/lib/smart flag --set exclude-packages $i
-                done
-
-                # Optional debugging
-                #smart --data-dir=${target_rootfs}/var/lib/smart config --set rpm-log-level=debug
-                #smart --data-dir=${target_rootfs}/var/lib/smart config --set rpm-log-file=/tmp/smart-debug-logfile
-
-                # Delay this until later...
-                #smart --data-dir=${target_rootfs}/var/lib/smart channel --add rpmsys type=rpm-sys -y
-
-                for canonical_arch in $INSTALL_PLATFORM_EXTRA_RPM; do
-                        arch=$(echo $canonical_arch | sed "s,\([^-]*\)-.*,\1,")
-                        if [ -d ${DEPLOY_DIR_RPM}/$arch -a ! -e ${target_rootfs}/install/channel.$arch.stamp ] ; then
-                                echo "Note: adding Smart channel $arch ($channel_priority)"
-                                smart --data-dir=${target_rootfs}/var/lib/smart channel --add $arch type=rpm-md type=rpm-md baseurl=${DEPLOY_DIR_RPM}/$arch -y
-                                smart --data-dir=${target_rootfs}/var/lib/smart channel --set $arch priority=$channel_priority
-                                touch ${target_rootfs}/install/channel.$arch.stamp
-                        fi
-                        channel_priority=$(expr $channel_priority - 5)
-                done
-        fi
-
-        # Construct install scriptlet wrapper
-        # Scripts need to be ordered when executed, this ensures numeric order
-        # If we ever run into needing more the 899 scripts, we'll have to
-        # change num to start with 1000.
-        #
-        cat << EOF > ${WORKDIR}/scriptlet_wrapper
-#!/bin/bash
-
-export PATH="${PATH}"
-export D="${target_rootfs}"
-export OFFLINE_ROOT="\$D"
-export IPKG_OFFLINE_ROOT="\$D"
-export OPKG_OFFLINE_ROOT="\$D"
-export INTERCEPT_DIR="${WORKDIR}/intercept_scripts"
-export NATIVE_ROOT=${STAGING_DIR_NATIVE}
-
-\$2 \$1/\$3 \$4
-if [ \$? -ne 0 ]; then
-  if [ \$4 -eq 1 ]; then
-    mkdir -p \$1/etc/rpm-postinsts
-    num=100
-    while [ -e \$1/etc/rpm-postinsts/\${num}-* ]; do num=\$((num + 1)); done
-    name=\`head -1 \$1/\$3 | cut -d' ' -f 2\`
-    echo "#!\$2" > \$1/etc/rpm-postinsts/\${num}-\${name}
-    echo "# Arg: \$4" >> \$1/etc/rpm-postinsts/\${num}-\${name}
-    cat \$1/\$3 >> \$1/etc/rpm-postinsts/\${num}-\${name}
-    chmod +x \$1/etc/rpm-postinsts/\${num}-\${name}
-  else
-    echo "Error: pre/post remove scriptlet failed"
-  fi
-fi
-EOF
-
-        echo "Note: configuring RPM cross-install scriptlet_wrapper"
-        chmod 0755 ${WORKDIR}/scriptlet_wrapper
-        smart --data-dir=${target_rootfs}/var/lib/smart config --set rpm-extra-macros._cross_scriptlet_wrapper=${WORKDIR}/scriptlet_wrapper
-
-        # Determine what to install
-        translate_oe_to_smart ${sdk_mode} ${package_to_install} ${package_linguas}
-
-        # If incremental install, we need to determine what we've got,
-        # what we need to add, and what to remove...
-        if [ "${INC_RPM_IMAGE_GEN}" = "1" -a "${INSTALL_COMPLEMENTARY_RPM}" != "1" ]; then
-                # Dump the new solution
-                echo "Note: creating install solution for incremental install"
-                smart --data-dir=${target_rootfs}/var/lib/smart install -y --dump ${pkgs_to_install} 2> ${target_rootfs}/../solution.manifest
-        fi
-
-        if [ "${INSTALL_COMPLEMENTARY_RPM}" != "1" ]; then
-                echo "Note: adding Smart RPM DB channel"
-                smart --data-dir=${target_rootfs}/var/lib/smart channel --add rpmsys type=rpm-sys -y
-        fi
-
-        # If incremental install, we need to determine what we've got,
-        # what we need to add, and what to remove...
-        if [ "${INC_RPM_IMAGE_GEN}" = "1" -a "${INSTALL_COMPLEMENTARY_RPM}" != "1" ]; then
-                # First upgrade everything that was previously installed to the latest version
-                echo "Note: incremental update -- upgrade packages in place"
-                smart --data-dir=${target_rootfs}/var/lib/smart upgrade
-
-                # Dump what is already installed
-                echo "Note: dump installed packages for incremental update"
-                smart --data-dir=${target_rootfs}/var/lib/smart query --installed --output ${target_rootfs}/../installed.manifest
-
-                sort ${target_rootfs}/../installed.manifest > ${target_rootfs}/../installed.manifest.sorted
-                sort ${target_rootfs}/../solution.manifest > ${target_rootfs}/../solution.manifest.sorted
-                
-                comm -1 -3 ${target_rootfs}/../solution.manifest.sorted ${target_rootfs}/../installed.manifest.sorted \
-                        > ${target_rootfs}/../remove.list
-                comm -2 -3 ${target_rootfs}/../solution.manifest.sorted ${target_rootfs}/../installed.manifest.sorted \
-                        > ${target_rootfs}/../install.list
-                
-                pkgs_to_remove=`cat ${target_rootfs}/../remove.list | xargs echo`
-                pkgs_to_install=`cat ${target_rootfs}/../install.list | xargs echo`
-                
-                echo "Note: to be removed: ${pkgs_to_remove}"
-
-                for pkg in ${pkgs_to_remove}; do
-                        echo "Debug: What required: $pkg"
-                        smart --data-dir=${target_rootfs}/var/lib/smart query $pkg --show-requiredby
-                done
-
-                [ -n "$pkgs_to_remove" ] && smart --data-dir=${target_rootfs}/var/lib/smart remove -y ${pkgs_to_remove}
-        fi
-
-        echo "Note: to be installed: ${pkgs_to_install}"
-        [ -n "$pkgs_to_install" ] && smart --data-dir=${target_rootfs}/var/lib/smart install -y ${pkgs_to_install}
-
-        if [ -n "${package_attemptonly}" ]; then
-                echo "Note: installing attempt only packages..."
-                echo "Attempting $pkgs_to_install"
-                echo "Note: see `dirname ${BB_LOGFILE}`/log.do_${task}_attemptonly.${PID}"
-                translate_oe_to_smart ${sdk_mode} --attemptonly $package_attemptonly
-                echo "Attempting $pkgs_to_install" >> "`dirname ${BB_LOGFILE}`/log.do_${task}_attemptonly.${PID}"
-                smart --data-dir=${target_rootfs}/var/lib/smart install --attempt -y ${pkgs_to_install} >> "`dirname ${BB_LOGFILE}`/log.do_${task}_attemptonly.${PID}" 2>&1 || :
-        fi
-}
-
 # Construct per file dependencies file
 def write_rpm_perfiledata(srcname, d):
     workdir = d.getVar('WORKDIR', True)