qemu: Fix CVE-2023-5088

A bug in QEMU could cause a guest I/O operation otherwise
addressed to an arbitrary disk offset to be targeted to
offset 0 instead (potentially overwriting the VM's boot code).

This change is to fix CVE-2023-5088.

Link: https://gitlab.com/qemu-project/qemu/-/commit/7d7512019fc40c577e2bdd61f114f31a9eb84a8e

(From OE-Core rev: aa84c668bfe2436d36f49a422c775119e2412c8b)

Signed-off-by: Sourav Pramanik <sourav.pramanik@kpit.com>
Signed-off-by: Sourav Kumar Pramanik <pramanik.souravkumar@gmail.com>
Signed-off-by: Steve Sakoman <steve@sakoman.com>

2 files changed, 113 insertions, 0 deletions

diff --git a/meta/recipes-devtools/qemu/qemu.inc b/meta/recipes-devtools/qemu/qemu.inc
index c8e4e2e6f3..c5fb9b1eab 100644
--- a/meta/recipes-devtools/qemu/qemu.inc
+++ b/meta/recipes-devtools/qemu/qemu.inc
@@ -102,6 +102,7 @@ SRC_URI = "https://download.qemu.org/${BPN}-${PV}.tar.xz \
            file://CVE-2023-3180.patch \
            file://CVE-2021-3638.patch \
            file://CVE-2023-1544.patch \
+           file://CVE-2023-5088.patch \
            "
 UPSTREAM_CHECK_REGEX = "qemu-(?P<pver>\d+(\.\d+)+)\.tar"
 
diff --git a/meta/recipes-devtools/qemu/qemu/CVE-2023-5088.patch b/meta/recipes-devtools/qemu/qemu/CVE-2023-5088.patch
new file mode 100644
index 0000000000..c5ea9d739a
--- /dev/null
+++ b/meta/recipes-devtools/qemu/qemu/CVE-2023-5088.patch
@@ -0,0 +1,112 @@
+From 7d7512019fc40c577e2bdd61f114f31a9eb84a8e Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Wed, 6 Sep 2023 15:09:21 +0200
+Subject: [PATCH] hw/ide: reset: cancel async DMA operation before resetting
+ state
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+If there is a pending DMA operation during ide_bus_reset(), the fact
+that the IDEState is already reset before the operation is canceled
+can be problematic. In particular, ide_dma_cb() might be called and
+then use the reset IDEState which contains the signature after the
+reset. When used to construct the IO operation this leads to
+ide_get_sector() returning 0 and nsector being 1. This is particularly
+bad, because a write command will thus destroy the first sector which
+often contains a partition table or similar.
+
+Traces showing the unsolicited write happening with IDEState
+0x5595af6949d0 being used after reset:
+
+> ahci_port_write ahci(0x5595af6923f0)[0]: port write [reg:PxSCTL] @ 0x2c: 0x00000300
+> ahci_reset_port ahci(0x5595af6923f0)[0]: reset port
+> ide_reset IDEstate 0x5595af6949d0
+> ide_reset IDEstate 0x5595af694da8
+> ide_bus_reset_aio aio_cancel
+> dma_aio_cancel dbs=0x7f64600089a0
+> dma_blk_cb dbs=0x7f64600089a0 ret=0
+> dma_complete dbs=0x7f64600089a0 ret=0 cb=0x5595acd40b30
+> ahci_populate_sglist ahci(0x5595af6923f0)[0]
+> ahci_dma_prepare_buf ahci(0x5595af6923f0)[0]: prepare buf limit=512 prepared=512
+> ide_dma_cb IDEState 0x5595af6949d0; sector_num=0 n=1 cmd=DMA WRITE
+> dma_blk_io dbs=0x7f6420802010 bs=0x5595ae2c6c30 offset=0 to_dev=1
+> dma_blk_cb dbs=0x7f6420802010 ret=0
+
+> (gdb) p *qiov
+> $11 = {iov = 0x7f647c76d840, niov = 1, {{nalloc = 1, local_iov = {iov_base = 0x0,
+>       iov_len = 512}}, {__pad = "\001\000\000\000\000\000\000\000\000\000\000",
+>       size = 512}}}
+> (gdb) bt
+> #0  blk_aio_pwritev (blk=0x5595ae2c6c30, offset=0, qiov=0x7f6420802070, flags=0,
+>     cb=0x5595ace6f0b0 <dma_blk_cb>, opaque=0x7f6420802010)
+>     at ../block/block-backend.c:1682
+> #1  0x00005595ace6f185 in dma_blk_cb (opaque=0x7f6420802010, ret=<optimized out>)
+>     at ../softmmu/dma-helpers.c:179
+> #2  0x00005595ace6f778 in dma_blk_io (ctx=0x5595ae0609f0,
+>     sg=sg@entry=0x5595af694d00, offset=offset@entry=0, align=align@entry=512,
+>     io_func=io_func@entry=0x5595ace6ee30 <dma_blk_write_io_func>,
+>     io_func_opaque=io_func_opaque@entry=0x5595ae2c6c30,
+>     cb=0x5595acd40b30 <ide_dma_cb>, opaque=0x5595af6949d0,
+>     dir=DMA_DIRECTION_TO_DEVICE) at ../softmmu/dma-helpers.c:244
+> #3  0x00005595ace6f90a in dma_blk_write (blk=0x5595ae2c6c30,
+>     sg=sg@entry=0x5595af694d00, offset=offset@entry=0, align=align@entry=512,
+>     cb=cb@entry=0x5595acd40b30 <ide_dma_cb>, opaque=opaque@entry=0x5595af6949d0)
+>     at ../softmmu/dma-helpers.c:280
+> #4  0x00005595acd40e18 in ide_dma_cb (opaque=0x5595af6949d0, ret=<optimized out>)
+>     at ../hw/ide/core.c:953
+> #5  0x00005595ace6f319 in dma_complete (ret=0, dbs=0x7f64600089a0)
+>     at ../softmmu/dma-helpers.c:107
+> #6  dma_blk_cb (opaque=0x7f64600089a0, ret=0) at ../softmmu/dma-helpers.c:127
+> #7  0x00005595ad12227d in blk_aio_complete (acb=0x7f6460005b10)
+>     at ../block/block-backend.c:1527
+> #8  blk_aio_complete (acb=0x7f6460005b10) at ../block/block-backend.c:1524
+> #9  blk_aio_write_entry (opaque=0x7f6460005b10) at ../block/block-backend.c:1594
+> #10 0x00005595ad258cfb in coroutine_trampoline (i0=<optimized out>,
+>     i1=<optimized out>) at ../util/coroutine-ucontext.c:177
+
+CVE: CVE-2023-5088
+Upstream-Status: Backport [https://gitlab.com/qemu-project/qemu/-/commit/7d7512019fc40c577e2bdd61f114f31a9eb84a8e]
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
+Tested-by: simon.rowe@nutanix.com
+Message-ID: <20230906130922.142845-1-f.ebner@proxmox.com>
+Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
+Signed-off-by: Sourav Pramanik <sourav.pramanik@kpit.com>
+---
+ hw/ide/core.c | 14 +++++++-------
+ 1 file changed, 7 insertions(+), 7 deletions(-)
+
+diff --git a/hw/ide/core.c b/hw/ide/core.c
+index b5e0dcd29b2..63ba665f3d2 100644
+--- a/hw/ide/core.c
++++ b/hw/ide/core.c
+@@ -2515,19 +2515,19 @@ static void ide_dummy_transfer_stop(IDEState *s)
+ 
+ void ide_bus_reset(IDEBus *bus)
+ {
+-    bus->unit = 0;
+-    bus->cmd = 0;
+-    ide_reset(&bus->ifs[0]);
+-    ide_reset(&bus->ifs[1]);
+-    ide_clear_hob(bus);
+-
+-    /* pending async DMA */
++    /* pending async DMA - needs the IDEState before it is reset */
+     if (bus->dma->aiocb) {
+         trace_ide_bus_reset_aio();
+         blk_aio_cancel(bus->dma->aiocb);
+         bus->dma->aiocb = NULL;
+     }
+ 
++    bus->unit = 0;
++    bus->cmd = 0;
++    ide_reset(&bus->ifs[0]);
++    ide_reset(&bus->ifs[1]);
++    ide_clear_hob(bus);
++
+     /* reset dma provider too */
+     if (bus->dma->ops->reset) {
+         bus->dma->ops->reset(bus->dma);
+--