linux/poky.git/meta/recipes-core/initrdscripts, branch krogoth

initrdscripts/init-install*: Add rootwait when installing to USB devices

2017-06-27T22:41:01+00:00

It can take a bit for USB devices to be detected, so if a USB device is your rootfs and you don't set rootwait you will most likely get a kernel panic. Fix this by adding rootwait to the kernel command line on installation. Fixes [YOCTO #9462]. (From OE-Core rev: 7f26cee3d8e4b2e9240b30c21be9fa7661186ccd) Signed-off-by: California Sullivan Signed-off-by: Ross Burton Signed-off-by: Richard Purdie

initramfs-live-boot: Make sure we kill udev before switching root when live booting

2016-09-23T14:27:04+00:00

When live booting, we need to make sure the running udev processes are killed to avoid unexepected behavior, we do this just before switching root, once we do, a new udev process will be spawned from init and will take care of whatever work was still missing [YOCTO #9520] (From OE-Core rev: e88d9e56952414e6214804f9b450c7106d04318d) (From OE-Core rev: e5190cdcf4efe5e80967bded13ef8e530811b0ec) Signed-off-by: Alejandro Hernandez Signed-off-by: Ross Burton Signed-off-by: Richard Purdie Signed-off-by: Armin Kuster Signed-off-by: Richard Purdie

initramfs-framework: base: Ensures /run/lock is available

2016-06-29T18:36:02+00:00

Depending on the module we use, the /run/lock may be required. This creates it as part of initial setup and thus makes it available for every sub module. (From OE-Core rev: 1cf288a0514ae9365fe55a0ff90b5abe35042cef) (From OE-Core rev: ac26089702a634654530114bbbf151bc0fde5711) Signed-off-by: Otavio Salvador Signed-off-by: Ross Burton Signed-off-by: Richard Purdie Signed-off-by: Armin Kuster Signed-off-by: Richard Purdie

initramfs-framework: mdev: Add a runtime dependency on busybox-mdev

2016-06-29T18:36:02+00:00

The mdev support relies on the mdev support inside busybox, which thus builds the busybox-mdev package. Adding the runtime dependency ensures its installation fails if mdev support is disabled. (From OE-Core rev: 48dbdc0317db6836cfeba083844910c15d5beb77) (From OE-Core rev: a32a7743003fb4b90b0dca7440235eceee787c00) Signed-off-by: Otavio Salvador Signed-off-by: Ross Burton Signed-off-by: Richard Purdie Signed-off-by: Armin Kuster Signed-off-by: Richard Purdie

init-install-efi.sh: remove all root=foo from grub.cfg

2016-04-03T14:51:35+00:00

There might be more than one root=/dev/foo in the config file which would cause unepected errros on the installed target, so remove all of them. [YOCTO #9354] (From OE-Core rev: ca402bc3bc4e9a5c3e19a6ca504017335212b2c9) Signed-off-by: Robert Yang Signed-off-by: Richard Purdie

init-install.sh: fix disk_size

2016-04-03T14:51:35+00:00

It mis-matched "SanDisk" or "Disk Flags" before, which caused unexpected error. (From OE-Core rev: a68ac76c1b6ed4c1a2fbc944c5021c89fd26217f) Signed-off-by: Robert Yang Signed-off-by: Richard Purdie

init-live.sh: fix overlay fs

2016-03-29T22:20:12+00:00

* The name changes from overlayfs to overlayo * The workdir is a must when mount * The updir must be a subdir of rootfs.rw This patch plus with another one which has been sent to linux-yocto can fix the error when boot iso: EXT4-fs (loop0): re-mounted. Opts: data=ordered Populating dev cache /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache.build: Read-only file system /etc/rcS.d/S36udev-cache: line 73: can't create /etc/udev-cache.tar.gz: Read-only file system udev-cache: update failed! rm: can't remove '/etc/udev/cache.data': Read-only file system /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache.build: Read-only file system /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache.build: Read-only file system /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache.build: Read-only file system /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache.build: Read-only file system /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache.build: Read-only file system /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache.build: Read-only file system /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache.build: Read-only file system /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache.build: Read-only file system rm: can't remove '/tmp': Read-only file system ln: /tmp/tmp: Read-only file system /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache.build: Read-only file system /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache.build: Read-only file system /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache.build: Read-only file system ln: /etc/resolv.conf: Read-only file system /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache.build: Read-only file system /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache.build: Read-only file system (From OE-Core rev: ba918e0e36418ec6e14aef537ff4fdf45af6d8d4) Signed-off-by: Robert Yang Signed-off-by: Richard Purdie

init-live.sh: fix ROOT_MOUNT

2016-03-29T22:20:12+00:00

The '/' in the end is not needed, which caused '//' in the path. (From OE-Core rev: 6b0fc87ced857763ae7e9d1012fb9f5c952c2cc8) Signed-off-by: Robert Yang Signed-off-by: Richard Purdie

init-live : make it easier to add custom boot targets

2016-03-20T23:12:27+00:00

When booting from the live image, the label from the bootloader is passed to init.sh. init.sh uses the label to either boot a live image or call a script to take over and install the system. It is possible to add new labels to the bootloader via the LABELS family of variables, but the names in init.sh were hardcoded to install and install-efi this patch checks if a shell script with the same name as the label is available instead of using a hardcoded list. Any recipe can add such file and this provide a new boot target to the live image (From OE-Core rev: 2c10ca0fe612818cb43931b969ad2af5502f1e84) Signed-off-by: Jérémy Rosen Signed-off-by: Ross Burton Signed-off-by: Richard Purdie

initrdscripts: fix mmc device as install target

2016-02-11T12:27:47+00:00

Installing from USB to an internal SD Card did not work with Linux 4.4 in Yocto jethro. With this patch, consistent names are used for the paritions. (From OE-Core rev: 00a45d2e50c4f044ee4099940dd7d13ca44f7187) Signed-off-by: Urs Fässler Signed-off-by: Ross Burton Signed-off-by: Richard Purdie