linux/poky.git/meta/recipes-core/busybox/files, branch python3

busybox/mdev: Ensure /sys is mounted before using it

2016-05-13T12:41:30+00:00

echo would fail if /sys is not mounted and boot would abort (From OE-Core rev: b8901336e72639342a1d784557043fa47a9d90ff) Signed-off-by: Khem Raj Signed-off-by: Richard Purdie

udhcpc: specify full path for ip command calls

2016-02-11T12:27:49+00:00

(From OE-Core rev: 97dd53468537968422569797122ddef4b779a488) Signed-off-by: Mark O'Donovan Signed-off-by: Ross Burton Signed-off-by: Richard Purdie

busybox: fix stop -vs- start typo in rcS script

2016-01-26T22:32:00+00:00

Also make the rcS and rcK comments match the code. (From OE-Core rev: 8b033e6faa0a6927f1e1ee2484381eff8231a549) Signed-off-by: Andre McCurdy Signed-off-by: Ross Burton Signed-off-by: Richard Purdie

busybox: Add support for busybox-init

2016-01-25T12:44:12+00:00

in config metadata we can configure busybox based init and device initializer ( mdev ) using e.g. VIRTUAL-RUNTIME_dev_manager = "busybox-mdev" VIRTUAL-RUNTIME_login_manager = "busybox" VIRTUAL-RUNTIME_init_manager = "busybox" VIRTUAL-RUNTIME_initscripts = "initscripts" VIRTUAL-RUNTIME_keymaps = "keymaps" DISTRO_FEATURES_BACKFILL_CONSIDERED += "sysvinit" busybox can be used to provide init system combined with mdev it makes it a complete init system for really tiny systems. This patch uses above defines to configure features in busybox to enable the init system and mdev in a configurable manner (From OE-Core rev: 75cb4fe38fade382450c5f6f35d5dcf55962143e) Signed-off-by: Khem Raj Signed-off-by: Richard Purdie

busybox: Fix mdev block device automounting

2015-11-16T11:39:27+00:00

The directory ${MDEV_AUTOMOUNT_ROOT}/ which is '/run/media' may not exist yet when the device is found, so lets use -p switch to mkdir cmd so it create preceding parent dirs if needed. Remove some bash specific constructs (From OE-Core rev: d5279c49c881a9a8991fda67a70cd49756ac3a92) Signed-off-by: Khem Raj Signed-off-by: Ross Burton Signed-off-by: Richard Purdie

busybox:udhcpc: Remove the routes from the right interface

2015-02-24T17:41:44+00:00

When using iproute2 to remove the route all default rules will be removed. Scope the removal by interface like it is done with ifconfig. (From OE-Core rev: 2127a57cb1b3d83f9f7640051403e47e485b132c) Signed-off-by: Holger Hans Peter Freyther Signed-off-by: Richard Purdie

busybox:udhcpc: Start with a metric of 10 for routes

2015-02-24T17:41:44+00:00

Linux allows to install multiple default routes with different metrics. Start with a metric above 0 to allow other parts of the system to install routes with a lower metric. (From OE-Core rev: 566441f58d398d93f948067cf399d00cf3b37eba) Signed-off-by: Holger Hans Peter Freyther Signed-off-by: Richard Purdie

busybox-mdev: Support automatic mounting of block devices

2014-12-19T18:08:03+00:00

Upon inserting a USB stick or similar device, mdev will run an automounter script that mounts valid partitions on /media/. The script first checks /etc/fstab entries so that mounting on UUID or LABEL or using custom mount options is still possible. If /etc/fstab does not contain particular mount options, the script will create (and remove) the mountpoint automatically. The script also supports full disk partitions (devices without partition table). The following environments can be set in /etc/default/mdev: MDEV_AUTOMOUNT=n (Disables automounting completely) MDEV_AUTOMOUNT_ROOT=/media (Change the mount root location) Automatic mounting for a particular device can be disabled by creating a file "/dev/.nomount". This is helpful in scripts that create partitions for example, and want to perform specific actions which require the device to remain unmounted. A more complex variation (using LABEL based mounts) on this script has been in use in OpenPLi for many years now, and I've used this one on many projects already, so it's about time to push this to mainline. (From OE-Core rev: 19073fb991b3e2d2304e55f94e30674adf375197) Signed-off-by: Mike Looijmans Signed-off-by: Ross Burton Signed-off-by: Richard Purdie

busybox-mdev: Add hotplug kernel module support to mdev.conf

2014-12-19T18:08:03+00:00

Add a line to mdev.conf that tells mdev to load kernel modules when required. For example, if you built wifi support as an external module, inserting a wifi stick into a USB port will now automatically load that module into the kernel and the wlan device will be ready for configuration. Without this patch, you have to load required modules manually or force them to load at system startup. (From OE-Core rev: 11420b0566a6a085c6cb78f3f1495ed9c599e6fd) Signed-off-by: Mike Looijmans Signed-off-by: Ross Burton Signed-off-by: Richard Purdie

busybox/find-touchscreen.sh: Simplify script and recognize USB devices

2014-12-19T18:08:03+00:00

Simplify the grep expression, use the more common "grep" command instead of "egrep", avoid forking extra processes, join multiple invokations into a single combined expression. Change the touchscreen regex so that it also recognizes various USB touchscreen controllers and the ad7879 i2c device. Based on code used in OpenPLi and meta-topic. (From OE-Core rev: e82353eb9f76b582122fda27c93339eac5553eb2) Signed-off-by: Mike Looijmans Signed-off-by: Ross Burton Signed-off-by: Richard Purdie