linux/poky.git/meta/lib, branch yocto-4.0.8

oeqa/selftest/bbtests: Update message lookup for test_git_unpack_nonetwork_fail

2023-02-24T16:41:46+00:00

bitbake's output changed, update the test (From OE-Core rev: 6b50713cd51002584915f46eb366b8667db210ea) Signed-off-by: Alexandre Belloni Signed-off-by: Richard Purdie (cherry picked from commit 7e64b63f96dd1d71e263e7bbbe6591e51e98395a) Signed-off-by: Steve Sakoman Signed-off-by: Richard Purdie

oeqa qemurunner.py: try to avoid reading one character at a time

2023-02-24T16:41:46+00:00

Read from serial console with a small delay to bundle data to e.g. full lines. Reading one character at a time is not needed and causes busy looping. (From OE-Core rev: e91a09702680b713293bcfcc851b27a73e884a8b) Signed-off-by: Mikko Rapeli Signed-off-by: Luca Ceresoli (cherry picked from commit 0049f6757f6f956fb4cc77b3df6a672c20b53cf4) Signed-off-by: Steve Sakoman Signed-off-by: Richard Purdie

oeqa qemurunner.py: add timeout to QMP calls

2023-02-24T16:41:46+00:00

When a qemu machine hangs, the QMP calls can hang for ever too, and when this happens any failing test commands from ssh runner may be followed by dump_monitor() calls which then also hang. Hangs followed by hangs. Use runqemutime at setup and run_monitor() specific timeout for later calls. (From OE-Core rev: 3b99d0ce6445084038f89dfa98605a7aec49107b) Signed-off-by: Mikko Rapeli Signed-off-by: Luca Ceresoli (cherry picked from commit 3a07bdf77dc6ecbf4c620b051dd032abaaf1e4ff) Signed-off-by: Steve Sakoman Signed-off-by: Richard Purdie

oeqa qemurunner: read more data at a time from serial

2023-02-24T16:41:46+00:00

Use a short sleep to bundle serial console reads so that we are not reading one character at a time which reduces busy looping. (From OE-Core rev: 3699e5bf2f9259266c49aaf69127183988b9d052) Signed-off-by: Mikko Rapeli Signed-off-by: Luca Ceresoli (cherry picked from commit cafe65d8cf7544edbd387f7f5f6d77c64c6b18fa) Signed-off-by: Steve Sakoman Signed-off-by: Richard Purdie

oeqa dump.py: add error counter and stop after 5 failures

2023-02-24T16:41:46+00:00

If test target qemu machine hangs completely, dump_target() calls over serial console are taking a long time to time out, possibly for every failing ssh command execution and a lot of test cases, and same with dump_monitor(). Instead of trying for ever, count errors and after 5 stop trying to dump_target() and dump_monitor() completely. These help to end testing earlier when a test target is completely deadlocked and all ssh, serial and QMP communication with it are failing. (From OE-Core rev: 91bc1e03bc990c527d8aadbdcd7bf97217db124e) Signed-off-by: Mikko Rapeli Signed-off-by: Luca Ceresoli (cherry picked from commit d9ad0a055abba983c6cee1dca4d2f0a8a3c48782) Signed-off-by: Steve Sakoman Signed-off-by: Richard Purdie

oeqa ssh.py: add connection keep alive options to ssh client

2023-02-24T16:41:46+00:00

Configure ssh client to test that connection with server is up. If the server does not respond within a minute then the connection, target machine or sshd daemon are stuck and it's better to exit the command execution with errors. Some tests can execute a long time without returning stdout/stderror data and it's difficult to adjust timers for those cases if connection to target machine or the target machine itself hangs and output is not expected in minutes or even hours. (From OE-Core rev: 94021c8571242dd491ee3c7c40144c5a12ca8e42) Signed-off-by: Mikko Rapeli Signed-off-by: Luca Ceresoli (cherry picked from commit ba68ff04c5786eca7cd8dd44056705867dea8ac4) Signed-off-by: Steve Sakoman Signed-off-by: Richard Purdie

oeqa ssh.py: move output prints to new line

2023-02-24T16:41:46+00:00

The output from is garbled otherwise and it's not easy to remove debug output form real command output on target. (From OE-Core rev: 36b572fbc5c88b9aaf4e146ecdb00c8d4ea6ff70) Signed-off-by: Mikko Rapeli Signed-off-by: Luca Ceresoli (cherry picked from commit 917a70cbc43ac1c70c477b220c4115735457ef04) Signed-off-by: Steve Sakoman Signed-off-by: Richard Purdie

oeqa context.py: fix --target-ip comment to include ssh port number

2023-02-15T21:46:56+00:00

Providing ssh port number is supported too with "--target-ip 192.168.0.10:22". (From OE-Core rev: 54c30e509074073b99a7a8890482ba1af2abbab9) Signed-off-by: Mikko Rapeli Signed-off-by: Richard Purdie (cherry picked from commit 637919b9df0abc06da5b2f9b389cf25376bd6b7c) Signed-off-by: Steve Sakoman Signed-off-by: Richard Purdie

oeqa/selftest/locales: Add selftest for locale generation/presence

2023-02-15T21:46:56+00:00

[YOCTO #9070] Add a new selftest to validate locale generation. This selftest builds a complete target with GLIBC_GENERATE_LOCALES, IMAGE_LINGUAS, ENABLE_BINARY_LOCALE_GENERATION set. (From OE-Core rev: 7b7a03a5cd8a5c14918f56e4dc00629d0a109a2e) Signed-off-by: Louis Rannou Signed-off-by: Richard Purdie (cherry picked from commit 53258fd810bea6475af9f908f7b712a13a02b628) Signed-off-by: Steve Sakoman Signed-off-by: Richard Purdie

meta: remove True option to getVar and getVarFlag calls (again)

2023-02-15T21:46:56+00:00

* True is default since 2016 and most layers were already updated not to pass this parameter where not necessary, e.g. oe-core was updated couple times, first in: https://git.openembedded.org/openembedded-core/commit/?id=7c552996597faaee2fbee185b250c0ee30ea3b5f Updated with the same regexp as later oe-core update: https://git.openembedded.org/openembedded-core/commit/?id=9f551d588693328e4d99d33be94f26684eafcaba with small modification to replace not only d.getVar, but also data.getVar as in e.g.: e.data.getVar('ERR_REPORT_USERNAME', True) and for getVarFlag: sed -e 's|$d\.getVarFlag \?$( \?$[^,()]*, \?[^,()]*$, \?True)|\1(\2)|g' \ -i $(git grep -E 'getVarFlag ?$ ?([^,()]*), ?([^,()]*), ?True$' \ | cut -d':' -f1 \ | sort -u) (From OE-Core rev: de7bf6689a19dc614ce4b39c84ffd825bee1b962) Signed-off-by: Martin Jansa Signed-off-by: Richard Purdie (cherry picked from commit 26c74fd10614582e177437608908eb43688ab510) Signed-off-by: Steve Sakoman (cherry picked from commit 24a86d0c55ee89ae0dc77975e1d0ee02898d2289) Signed-off-by: Steve Sakoman Signed-off-by: Richard Purdie