linux/poky.git/meta/lib, branch yocto-2.7.1

gpg_sign/selftest: Fix secmem parameter handling

2019-06-30T21:34:23+00:00

We keep seeing "cannot allocate memory" errors from rpm when signing packages on the autobuilder. The following were tried: * checking locked memory use (isn't hitting limits) * Restricting RPM_GPG_SIGN_CHUNK to 1 * Limiting to 10 parallel do_package_write_rpm tasks * Allowing unlimied memory overcommit * Disabling rpm parallel compression and the test still failed. Further invetigation showed that the --auto-expand-secmem wasn't being passed to gpg-agent which meant the secmem couldn't be expanded hence the errors when there was pressure on the agent. The reason this happens is that some of the early gpg commands can start the agent without the option and it sticks around in memory so a version with the correct option may or may not get started. We therefore add the option to all the key gpg calls. (From OE-Core rev: 028475f5b6ae9c9b181812c0c8a6aa382640f4bf) Signed-off-by: Richard Purdie Signed-off-by: Armin Kuster Signed-off-by: Richard Purdie

oeqa/logparser: ignore test failure commentary

2019-06-30T21:34:23+00:00

The output format for Python and GLib both can be of this form: FAIL: foobar (Segmentation fault) In this case the test is called foobar not foobar_segmentation_fault. (From OE-Core rev: 95031da4f08295ad81efac1c082c48dd5c330fb0) Signed-off-by: Ross Burton Signed-off-by: Richard Purdie Signed-off-by: Armin Kuster Signed-off-by: Richard Purdie

rootfs: Fix dependency for every dpkg run

2019-06-30T21:34:23+00:00

Avoid getting a warning on do_rootfs. Fixes: NOTE: Installing the following packages: libgdk-pixbuf-2.0-locale-en-gb glibc-locale-en-gb libatspi-locale-en-gb gstreamer1.0-locale-en-gb gtk+3-locale-en libatk-1.0-locale-en-gb gtk+3-locale-en-gb gstreamer1.0-plugins-good-locale-en-gb gstreamer1.0-plugins-base-locale-en-gb gstreamer1.0-plugins-bad-locale-en-gb libglib-2.0-locale-en-gb avahi-locale-en-gb vte-locale-en-gb xkeyboard-config-locale-en-gb WARNING: Unable to install packages. Command '/workdir/build/tmp/work/qt5122-poky-linux/bottlecam-image/1.0-r0/recipe-sysroot-native/usr/bin/apt-get install --force-yes --allow-unauthenticated libgdk-pixbuf-2.0-locale-en-gb glibc-locale-en-gb libatspi-locale-en-gb gstreamer1.0-locale-en-gb gtk+3-locale-en libatk-1.0-locale-en-gb gtk+3-locale-en-gb gstreamer1.0-plugins-good-locale-en-gb gstreamer1.0-plugins-base-locale-en-gb gstreamer1.0-plugins-bad-locale-en-gb libglib-2.0-locale-en-gb avahi-locale-en-gb vte-locale-en-gb xkeyboard-config-locale-en-gb' returned 100: Reading package lists... Building dependency tree... Reading state information... (From OE-Core rev: 747d80a496741090f9925c007b03cd68501ef131) Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Richard Purdie Signed-off-by: Armin Kuster Signed-off-by: Richard Purdie

manifest.py: fix test_SDK_manifest_entries

2019-06-30T21:34:23+00:00

TOOLCHAIN_OUTPUTNAME could be overridden. So use this variable directly instead of its default value ${SDK_NAME}-toolchain-${SDK_VERSION}. (From OE-Core rev: eb32dd2956da99813136842acdb010c8471f5e3c) Signed-off-by: Chen Qi Signed-off-by: Richard Purdie Signed-off-by: Armin Kuster Signed-off-by: Richard Purdie

context.py: fix skipping function

2019-06-30T21:34:23+00:00

The current codes to skip test cases are logically correct, but they do not work correctly in reality. It does skip the tests as the command line argument specifies, but the related information is wrong. e.g. $ oe-selftest -R archiver bblayers runtime_test 2019-06-17 09:24:53,764 - oe-selftest - WARNING - meta-selftest layer not found in BBLAYERS, adding it 2019-06-17 09:25:06,309 - oe-selftest - INFO - Adding layer libraries: 2019-06-17 09:25:06,310 - oe-selftest - INFO - /buildarea5/chenqi/SWAT/poky/meta/lib 2019-06-17 09:25:06,310 - oe-selftest - INFO - /buildarea5/chenqi/SWAT/poky/meta-yocto-bsp/lib 2019-06-17 09:25:06,310 - oe-selftest - INFO - /buildarea5/chenqi/SWAT/poky/meta-selftest/lib 2019-06-17 09:25:06,312 - oe-selftest - INFO - Running bitbake -e to test the configuration is valid/parsable 2019-06-17 09:25:10,521 - oe-selftest - INFO - Adding: "include selftest.inc" in /buildarea5/chenqi/SWAT/poky/build-selftest/conf/local.conf 2019-06-17 09:25:10,521 - oe-selftest - INFO - Adding: "include bblayers.inc" in bblayers.conf 2019-06-17 09:25:10,522 - oe-selftest - INFO - test_archiver_allows_to_filter_on_recipe_name (archiver.Archiver) 2019-06-17 09:25:10,522 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "runtime_test"' 2019-06-17 09:25:10,522 - oe-selftest - INFO - Skip by the command line argument "runtime_test" 2019-06-17 09:25:10,523 - oe-selftest - INFO - test_archiver_filters_by_type (archiver.Archiver) 2019-06-17 09:25:10,523 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "runtime_test"' 2019-06-17 09:25:10,523 - oe-selftest - INFO - Skip by the command line argument "runtime_test" The archiver.Archiver.xxx tests should be skipped by 'archiver' command line argument, not 'runtime_test'. Change to use a function generator to achieve the desired effect. After the change, the effect is as follows. $ oe-selftest -R archiver bblayers runtime_test 2019-06-17 09:19:06,223 - oe-selftest - WARNING - meta-selftest layer not found in BBLAYERS, adding it 2019-06-17 09:19:19,598 - oe-selftest - INFO - Adding layer libraries: 2019-06-17 09:19:19,599 - oe-selftest - INFO - /buildarea5/chenqi/SWAT/poky/meta/lib 2019-06-17 09:19:19,599 - oe-selftest - INFO - /buildarea5/chenqi/SWAT/poky/meta-yocto-bsp/lib 2019-06-17 09:19:19,599 - oe-selftest - INFO - /buildarea5/chenqi/SWAT/poky/meta-selftest/lib 2019-06-17 09:19:19,602 - oe-selftest - INFO - Running bitbake -e to test the configuration is valid/parsable 2019-06-17 09:19:24,368 - oe-selftest - INFO - Adding: "include selftest.inc" in /buildarea5/chenqi/SWAT/poky/build-selftest/conf/local.conf 2019-06-17 09:19:24,368 - oe-selftest - INFO - Adding: "include bblayers.inc" in bblayers.conf 2019-06-17 09:19:24,369 - oe-selftest - INFO - test_archiver_allows_to_filter_on_recipe_name (archiver.Archiver) 2019-06-17 09:19:24,369 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "archiver"' 2019-06-17 09:19:24,369 - oe-selftest - INFO - Skip by the command line argument "archiver" 2019-06-17 09:19:24,369 - oe-selftest - INFO - test_archiver_filters_by_type (archiver.Archiver) 2019-06-17 09:19:24,370 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "archiver"' 2019-06-17 09:19:24,370 - oe-selftest - INFO - Skip by the command line argument "archiver" 2019-06-17 09:19:24,370 - oe-selftest - INFO - test_archiver_filters_by_type_and_name (archiver.Archiver) 2019-06-17 09:19:24,370 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "archiver"' 2019-06-17 09:19:24,371 - oe-selftest - INFO - Skip by the command line argument "archiver" 2019-06-17 09:19:24,371 - oe-selftest - INFO - test_archiver_srpm_mode (archiver.Archiver) 2019-06-17 09:19:24,371 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "archiver"' 2019-06-17 09:19:24,372 - oe-selftest - INFO - Skip by the command line argument "archiver" 2019-06-17 09:19:24,372 - oe-selftest - INFO - test_bitbakelayers_add_remove (bblayers.BitbakeLayers) 2019-06-17 09:19:24,373 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "bblayers"' 2019-06-17 09:19:24,373 - oe-selftest - INFO - Skip by the command line argument "bblayers" 2019-06-17 09:19:24,373 - oe-selftest - INFO - test_bitbakelayers_createlayer (bblayers.BitbakeLayers) 2019-06-17 09:19:24,373 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "bblayers"' 2019-06-17 09:19:24,374 - oe-selftest - INFO - Skip by the command line argument "bblayers" [snip] (From OE-Core rev: efdde9ee80f17a302e2b435b6a1103b001c612dc) Signed-off-by: Chen Qi Signed-off-by: Richard Purdie Signed-off-by: Armin Kuster Signed-off-by: Richard Purdie

selftest/devtool: fix URI to MarkupSafe package

2019-06-30T21:34:22+00:00

PyPi packages are now hosted at files.pythonhosted.org. [YOCTO #13243] (From OE-Core rev: d498a41d89adcead8995668f54c01a175c081bca) Signed-off-by: Oleksandr Kravchuk Signed-off-by: Richard Purdie Signed-off-by: Armin Kuster Signed-off-by: Richard Purdie

qemurunner: fix undefined variable

2019-06-18T10:28:58+00:00

While hacking on this I got an Exception. It's better to define variables also in python. Signe:-off-by: Adrian Freihofer (From OE-Core rev: 7c604a62356538de660835bd2d3ba26beccd810d) Signed-off-by: Richard Purdie Signed-off-by: Armin Kuster Signed-off-by: Richard Purdie

logparser: Add LTP compliance section

2019-06-18T10:28:58+00:00

(From OE-Core rev: 386795d14c23d2e4084563c6234779b90e4d400f) Signed-off-by: Armin Kuster Signed-off-by: Richard Purdie Signed-off-by: Armin Kuster Signed-off-by: Richard Purdie

logparser: Add decoding ltp logs

2019-06-18T10:28:58+00:00

(From OE-Core rev: 8c0a03c24248bf69e9c8c0f2d949ff79efc9c71e) Signed-off-by: Armin Kuster Signed-off-by: Richard Purdie Signed-off-by: Armin Kuster Signed-off-by: Richard Purdie

oeqa/utils/qemurunner: Set both the threadport&serverport with tcpserial parameter

2019-06-18T10:28:58+00:00

After the commit ad522ea6a64e ("runqemu: Let qemuparams override default settings"), the order of the two "-serial" parameters when running the qemu have been switched. The effect of this is that the logging thread will use ttyS1 (of course can't capture the kernel boot message anymore), and the test command will run on the ttyS0. So the output of the test command may be mangled by the kernel message (such as call trace), and let the test command produce a fake timeout error message. We can't fix it by just adjusting the order of the threadport and serverport, since it will break some machines such as qemuarm64 which use the virtio serial. So using the tcpserial to setup both the threadport and serverport. [YOCTO Bug 13309] (From OE-Core rev: 1ffea0c0fb3688f3cee0a5fa741e969581d01bd3) Signed-off-by: Kevin Hao Signed-off-by: Richard Purdie Signed-off-by: Armin Kuster Signed-off-by: Richard Purdie