linux/poky.git/meta/lib/oeqa/core, branch master

The poky repository master branch is no longer being updated.

2025-11-07T13:31:53+00:00

You can either: a) switch to individual clones of bitbake, openembedded-core, meta-yocto and yocto-docs b) use the new bitbake-setup You can find information about either approach in our documentation: https://docs.yoctoproject.org/ Note that "poky" the distro setting is still available in meta-yocto as before and we continue to use and maintain that. Long live Poky! Some further information on the background of this change can be found in: https://lists.openembedded.org/g/openembedded-architecture/message/2179 Signed-off-by: Richard Purdie

oeqa: target: ssh: Fail on SSH error even when errors are ignored

2025-10-09T09:58:07+00:00

Most tests running SSH commands ask for no error to be raised when the returned status is not 0. As run() will return this status, they may later use its value to do a similar check on their own, or completely ignore it. But most of the tests do not check if the non-zero status is caused by a fail of the command run on the target or by a fail of SSH itself. This can lead to confusion when the error does not come from the command executed on the target but from SSH itself: test might wrongfully be marked as PASSED or might fail with incoherent errors. As SSH errors are always reported with exit code 255, we can easily filter these. Modify OESSHTarget.run() behaviour so an AssertionError is raised on SSH failures, even when ignore_status parameter is True. Still allow to explicitly ignore this error for the rare cases where this can be needed. (From OE-Core rev: afe118d4f2de1f636b3a81dc692da35b35a3f2d7) Signed-off-by: Mathieu Dubois-Briand Signed-off-by: Richard Purdie

oeqa/qemu: Add compressed image types that are now supported

2025-08-06T21:32:41+00:00

Add compressed image types that are now supported to the supported fstypes list. (From OE-Core rev: 2e2406213347ad294e301de45ff5be59292bdc3b) Signed-off-by: Richard Purdie

oeqa context.py: use TEST_SUITES if set

2025-07-07T21:12:49+00:00

If build target has set TEST_SUITES, then that should be the default test modules to execute. Fixes testexport.bbclass to run same tests as testimage.bbclass which already uses TEST_SUITES. (From OE-Core rev: c66b1dc0a2f973a84dc38b7cc27ae823e0f0a916) Signed-off-by: Mikko Rapeli Signed-off-by: Antonin Godard Signed-off-by: Richard Purdie

oeqa/runtime: set self.runner and handle None

2025-07-03T09:40:17+00:00

Set default self.runner to None. qemu target sets the runner to qemu. Then handle self.runner None in run_network_serialdebug(). This way ssh runner and failing ping or ssh tests handle the error cases. (From OE-Core rev: 39f72147ef402bea54a66abf984315c1f93aa141) Signed-off-by: Mikko Rapeli Signed-off-by: Richard Purdie

oeqa/core/case: add file exists assertion

2025-06-23T20:42:54+00:00

Add assertFileExists() to simply tests that want to check that a file exists. (From OE-Core rev: b62e53a0cff2522fef3b89de875c9526a626d7dd) Signed-off-by: Ross Burton Signed-off-by: Richard Purdie

oeqa decorator/data.py: add skipIfNotBuildArch decorator

2025-06-05T10:02:22+00:00

To limit tests to specific build host architectures. For example KVM testing will only work if target and build architectures are the same. (From OE-Core rev: c59b74b8bfd3b351a31204f33e00351ad5e5b657) Signed-off-by: Mikko Rapeli Signed-off-by: Richard Purdie

resulttool: Use single space indentation in json output

2024-11-23T14:44:54+00:00

Using 4 space indentation in resulted in hundreds of megabytes of extra file size in general use. Reduce this to make filesizes more managable and reduce the processing cost. Some level of indentation and spacing does make the files more readable and allows use of git diff so we need to retain some of it. (From OE-Core rev: a274cdcaf852cca9497f0358f44dda99c06aacbe) Signed-off-by: Richard Purdie

oeqa/ssh: Improve performance and log sizes

2024-11-21T12:16:28+00:00

The current code is not fit for purpose when handling large files via ssh. In the strace ptest case, we can end up with a 1.4GB archive being transferred for which every byte is printed into the task logfile twice over. This is then sent over bitbake IPC which compounds the problems. Make the following improvements: * when the output is large (over 64kb), don't print it * use a bytearray for better concat performance since strings are slow for this * when there is no ssh output, say that * print periodic size status output rather than the data itself since this could be binary and/or large * fix the killed process message logic which appeared broken (From OE-Core rev: e7dd009a17dc902852983a82bce41bf78bb1e242) Signed-off-by: Richard Purdie

testexport: support for executing tests over serial

2024-09-01T11:28:10+00:00

Uses TEST_SERIALCONTROL_CMD to open a serial connection to the target and execute commands. This is a drop in replacement for the ssh target, fully supporting the same API. Supported with testexport. To use, set the following in local.conf: - TEST_TARGET to "serial" - TEST_SERIALCONTROL_CMD to a shell command or script which connects to the serial console of the target and forwards that connection to standard input/output. - TEST_SERIALCONTROL_EXTRA_ARGS (optional) any parameters that must be passed to the serial control command. - TEST_SERIALCONTROL_PS1 (optional) A regex string representing an empty prompt on the target terminal. Example: "root@target:.*# ". This is used to find an empty shell after each command is run. This field is optional and will default to "root@{MACHINE}:.*# " if no other value is given. - TEST_SERIALCONTROL_CONNECT_TIMEOUT (optional) Specifies the timeout in seconds for the initial connection to the target. Defaults to 10 if no other value is given. The serial target does have some additional limitations over the ssh target. 1. Only supports one "run" command at a time. If two threads attempt to call "run", one will block until it finishes. This is a limitation of the serial link, since two connections cannot be opened at once. 2. For file transfer, the target needs a shell and the base32 program. The file transfer implementation was chosen to be as generic as possible, so it could support as many targets as possible. 3. Transferring files is significantly slower. On a 115200 baud serial connection, the fastest observed speed was 30kbps. This is due to overhead in the implementation due to decisions documented in #2 above. (From OE-Core rev: d817b27d73d29ba2beffa2e0a4e31a14dbe0f1bf) Signed-off-by: Andrew Oppelt Signed-off-by: Matthew Weber Signed-off-by: Chuck Wolber -- Tested with core-image-sato on real hardware. TEST_SERIALCONTROL_CMD was set to a bash script which connected with telnet to the target. Additionally tested with QEMU by setting TEST_SERIALCONTROL_CMD to "ssh -o StrictHostKeyChecking=no root@192.168.7.2". This imitates a serial connection to the QEMU instance. Steps: 1) Set the following in local.conf: - IMAGE_CLASSES += "testexport" - TEST_TARGET = "serial" - TEST_SERIALCONTROL_CMD="ssh -o StrictHostKeyChecking=no root@192.168.7.2" 2) Build an image - bitbake core-image-sato 3) Run the test export - bitbake -c testexport core-image-sato 4) Run the image in qemu - runqemu nographic core-image-sato 5) Navigate to the test export directory 6) Run the exported tests with target-type set to serial - ./oe-test runtime --test-data-file ./data/testdata.json --packages-manifest ./data/manifest --debug --target-type serial Signed-off-by: Alexandre Belloni Signed-off-by: Richard Purdie