linux/poky.git/meta/conf/machine, branch uninative-1.4

runqemu: Move virtio RNG to machine configuration

2016-09-23T13:56:39+00:00

Not all QEMU machines (outside of those available in OE-Core) are capable of using the virtio-rng-pci device due to various machine models not having a pci/virtio bus. This makes it such that the use of the '-device virtio-rng-pci' flag to QEMU is machine specific. This patch removes the general addition of the flag to all runqemu targets and adds the flag into the QB_OPT_APPEND for all the qemu* machines in OE-Core that support its use (which is all of them). (From OE-Core rev: e890c05e66a21702e9e8ccce794b74cb7f5518ed) Signed-off-by: Nathan Rossi Signed-off-by: Ross Burton Signed-off-by: Richard Purdie

qemuppc.conf: adjust kernel console

2016-09-20T14:11:07+00:00

Fixed kernel trace when booting: [ 12.825809] random: crng init done [ 13.918323] irq 36: nobody cared (try booting with the "irqpoll" option) [ 13.924821] CPU: 0 PID: 335 Comm: getty Not tainted 4.8.0-rc5-yocto-standard #1 [ 13.930492] Call Trace: [ 13.936214] [cff73f20] [c00790f0] __report_bad_irq.isra.0+0x3c/0x128 (unreliable) [ 13.941908] [cff73f40] [c0079518] note_interrupt+0x2b8/0x304 [ 13.947265] [cff73f70] [c00766f4] handle_irq_event_percpu+0x5c/0x74 [ 13.952503] [cff73f90] [c0076768] handle_irq_event+0x5c/0xdc [ 13.957667] [cff73fa0] [c007a29c] handle_fasteoi_irq+0xdc/0x234 [ 13.962984] [cff73fc0] [c007592c] generic_handle_irq+0x3c/0x58 [ 13.968288] [cff73fd0] [c0006c74] __do_irq+0x54/0x18c [ 13.973612] [cff73ff0] [c000f9c8] call_do_irq+0x24/0x3c [ 13.978742] [cf0cdb70] [c0006e40] do_IRQ+0x94/0x110 [ 13.983992] [cf0cdba0] [c001215c] ret_from_except+0x0/0x14 [ 13.989281] --- interrupt: 501 at pmz_set_termios+0x130/0x6d8 [ 13.989281] LR = pmz_set_termios+0xf0/0x6d8 [ 13.999353] [cf0cdc90] [c049f130] uart_change_speed.isra.2+0x60/0x168 [ 14.004436] [cf0cdcb0] [c049fdbc] uart_startup.part.8+0xec/0x1e0 [ 14.009625] [cf0cdce0] [c04a0ab4] uart_open+0x138/0x16c [ 14.014723] [cf0cdd00] [c047e510] tty_open+0x118/0x65c [ 14.019743] [cf0cdd60] [c01894c8] chrdev_open+0xdc/0x1e0 [ 14.024616] [cf0cdd90] [c01807d0] do_dentry_open+0x23c/0x358 [ 14.029418] [cf0cddc0] [c0194878] path_openat+0x58c/0x1084 [ 14.034054] [cf0cde50] [c01965b4] do_filp_open+0xbc/0x10c [ 14.038539] [cf0cdf00] [c01822fc] do_sys_open+0x154/0x224 [ 14.043105] [cf0cdf40] [c0011a44] ret_from_syscall+0x0/0x38 [ 14.047828] --- interrupt: c01 at 0xfeef5a0 [ 14.047828] LR = 0xfeef544 [ 14.056543] handlers: [ 14.060980] [] pmz_interrupt [ 14.065468] Disabling IRQ #36 (From OE-Core rev: 7c6d0e4ada6dea6ac994e637b7d5cf007f73e411) Signed-off-by: Robert Yang Signed-off-by: Richard Purdie

qemuboot-x86: Add task_timeout = -1 to uvesafb

2016-09-16T14:24:03+00:00

This causes the default timeout to be set to infinity, it will still report out every 5000 milliseconds (From OE-Core rev: fd9e1ba8f70402bd3c4b873d349057f96f5bcb19) Signed-off-by: Saul Wold Signed-off-by: Richard Purdie

runqemu: Allow unique network interface MAC addresses

2016-09-09T11:07:32+00:00

Current qemu instances all share the same MAC address. This shouldn't be an issue as they are all on separate network interfaces, however on the slight chance this is causing problems, its easy enough to ensure we use unique MAC addresses based on the IP numbers we assign. (From OE-Core rev: c01962bf88786dd84ad83cc1d315297607d29f7c) Signed-off-by: Richard Purdie

qemu.inc: inherit qemuboot.bbclass

2016-09-09T11:07:32+00:00

All qemu boards should be able to boot by runqemu. (From OE-Core rev: 5174889d59a5d6da29b4290376010dd176767e1f) Signed-off-by: Robert Yang Signed-off-by: Richard Purdie

qemuppc: Use virtio networking instead of pcnet

2016-09-09T11:07:32+00:00

qemuppc can use virtio networking and we may as well do so for better prformance as we do under the other emulated hardware. (From OE-Core rev: 8a82ded799be79eacb64cf313b6f2799a4f5ffab) Signed-off-by: Richard Purdie

qemuppc.conf: set vars for runqemu

2016-09-09T11:07:32+00:00

(From OE-Core rev: 2c8e5657cafafe848c7e7c714e5e73bb82799d65) Signed-off-by: Robert Yang Signed-off-by: Richard Purdie

qemumips/qemumips64.conf: set vars for runqemu

2016-09-09T11:07:31+00:00

Add qemuboot-mips.inc to reduce duplicated code, the various mips bsps which can be boot by runqemu can require qemuboot-mips.inc (From OE-Core rev: cb28128477e98ed7dc7a90dd197f6dd04cf75be0) Signed-off-by: Robert Yang Signed-off-by: Richard Purdie

qemux86.conf/qemux86-64.conf: set vars for runqemu

2016-09-09T11:07:31+00:00

Add qemuboot-x86.inc to reduce duplicated code, the x86/x86_64 bsps which can be boot by runqemu can require qemuboot-x86.inc. (From OE-Core rev: b5ff3dda2a576ba7e5d68198ea6c6eb49cf80eb8) Signed-off-by: Robert Yang Signed-off-by: Richard Purdie

qemuarm64.conf: set vars for runqemu

2016-09-09T11:07:31+00:00

(From OE-Core rev: 73bccbbfc0f987fc82aca5411e15f62c02e5336c) Signed-off-by: Robert Yang Signed-off-by: Richard Purdie