linux/poky.git/meta/conf/machine/qemuarm64.conf, branch morty

Use weak assignment for SERIAL_CONSOLES in qemu configuration files

2017-01-11T17:21:45+00:00

Use weak assignment for SERIAL_CONSOLES in qemu configuration files so that the value could serve as a default value and could be easily overridden in configuration files like local.conf. When using the default value for SERIAL_CONSOLES in qemux86-64,we would have annoying messages on console complaining about respawning getty on ttyS1. Although the value is set by purpose, at least we need to provide an easy way to override it. (From OE-Core rev: 5f060b66162c41a295995947b918253450870117) (From OE-Core rev: 5a19335f0f1d763a066a8c9ead23bb332e229f93) Signed-off-by: Chen Qi Signed-off-by: Ross Burton Signed-off-by: Richard Purdie Signed-off-by: Armin Kuster Signed-off-by: Richard Purdie

qemuarm64.conf: make runqemu's graphics work

2017-01-11T17:21:41+00:00

Fixed: $ runqemu qemuarm64 (without -nographics) There is no output in qemu console without this fix. (From OE-Core rev: 40a64e64b2ff41661ff254d0836c5f60120c6795) (From OE-Core rev: f07c139e91d2173dac4289727d1401a19d6ed821) Signed-off-by: Robert Yang Signed-off-by: Ross Burton Signed-off-by: Richard Purdie Signed-off-by: Armin Kuster Signed-off-by: Richard Purdie

machine/qemu*: Add comment regarding the reason for virtio-rng-pci

2016-09-28T09:16:03+00:00

Bring across the comment that was in runqemu regarding why the virtio-rng-pci device was needed. This comment is added to each location where the virtio-rng-pci device is added. (From OE-Core rev: bc5d1fdea674e842e4b0c45b38782930ec133051) Signed-off-by: Nathan Rossi Signed-off-by: Richard Purdie

runqemu: Move virtio RNG to machine configuration

2016-09-23T13:56:39+00:00

Not all QEMU machines (outside of those available in OE-Core) are capable of using the virtio-rng-pci device due to various machine models not having a pci/virtio bus. This makes it such that the use of the '-device virtio-rng-pci' flag to QEMU is machine specific. This patch removes the general addition of the flag to all runqemu targets and adds the flag into the QB_OPT_APPEND for all the qemu* machines in OE-Core that support its use (which is all of them). (From OE-Core rev: e890c05e66a21702e9e8ccce794b74cb7f5518ed) Signed-off-by: Nathan Rossi Signed-off-by: Ross Burton Signed-off-by: Richard Purdie

runqemu: Allow unique network interface MAC addresses

2016-09-09T11:07:32+00:00

Current qemu instances all share the same MAC address. This shouldn't be an issue as they are all on separate network interfaces, however on the slight chance this is causing problems, its easy enough to ensure we use unique MAC addresses based on the IP numbers we assign. (From OE-Core rev: c01962bf88786dd84ad83cc1d315297607d29f7c) Signed-off-by: Richard Purdie

qemuarm64.conf: set vars for runqemu

2016-09-09T11:07:31+00:00

(From OE-Core rev: 73bccbbfc0f987fc82aca5411e15f62c02e5336c) Signed-off-by: Robert Yang Signed-off-by: Richard Purdie

qemuarm64.conf: don't clear MACHINE_FEATURES

2016-03-20T23:12:28+00:00

Accept the default MACHINE_FEATURES from qemu.inc (qemuarm64 shouldn't need to be a special case). (From OE-Core rev: e26718f8c048315e2ab819bc60566061f6ced420) Signed-off-by: Andre McCurdy Signed-off-by: Ross Burton Signed-off-by: Richard Purdie

qemuarm64.conf: Make the second serial console /dev/hvc0

2015-08-29T12:38:04+00:00

Since the qemu for aarch64 must use a virtual console for the second serial port rather than emulating actual hardware, make sure the correct device is specified so that a tty is actually started. (From OE-Core rev: 5b720a69f0d181ab2de6032a6e3f5a0ee4a14302) Signed-off-by: Randy Witt Signed-off-by: Ross Burton Signed-off-by: Richard Purdie

qemurunner: Use two serial ports and log console with a thread

2015-08-24T22:47:07+00:00

qemu can freeze and stop responding if the socket buffer connected to a tcp serial connection fills up. This happens of course when the reader of the serial data doesn't actually read it. This happened in the qemurunner code, because after checking for the "login:" sentinel, data was never again read from the serial connection. This patch solves the potential freeze by adding a thread to continuously read the data from the console and log it. So it also will give a full log of the console, rather than just up to the login prompt. To simplify this patch, another serial port was also added to use for the sole purpose of watching for the sentinel as well as being the interactive serial port. This will also prevent the possibility of lots of debug data on the console preventing the sentinel value from being seen due to interleaved text. (From OE-Core rev: 2da3fee6b6d9f4dd4c4cb529f4ba393c20aa0f13) Signed-off-by: Randy Witt Signed-off-by: Ross Burton Signed-off-by: Richard Purdie

Add machine qemuarm64

2014-12-23T10:18:17+00:00

Add machine qemuarm64. The configure files are derived from linaro. Update: * rename genericarmv8 to qemuarm64 for coordination in oe-core * include qemu.inc then remove common part of config * disable using autoserial * move arch-armv8.inc from machine/include/arm64 to machine/include/arm [YOCTO #6487] (From OE-Core rev: d7314c3bc804b7bcc921b0a6c5b63d71ca2e73db) Signed-off-by: Kai Kang Signed-off-by: Richard Purdie