linux/poky.git/meta/classes, branch 2.7_M2

python3: upgrade to 3.7.2

2019-02-08T10:57:19+00:00

I took the same approach as the recent perl upgrade: write recipe from scratch, taking the pieces from the old recipe only when they were proven to be necessary. The pgo, manifest and ptest features are all preserved. New features: - native and target recipes are now unified into one recipe - check_build_completeness.py runs right after do_compile() and verifies that all optional modules have been built (a notorious source of regressions) - a new approach to sysconfig.py and distutils/sysconfig.py returning values appropriate for native or target builds: we copy the configuration file to a separate folder, add that folder to sys.path (through environment variable that differs between native and target builds), and point python to the file through another environment variable. There were a few other patches where it was difficult to decide if the patch is still relevant, and how to test that it works correctly; please add those as-needed by testing the new python. (From OE-Core rev: 02714c105426b0d687620913c1a7401b386428b6) Signed-off-by: Alexander Kanavin Signed-off-by: Richard Purdie

archiver/package_rpm: Fix the worst src.rpm generation race

2019-02-06T08:29:07+00:00

The package_rpm code is writing outside the task's sstate directory into the sstate of do_deploy_archives. This is "out of spec" since if the task is installed from sstate, the files are not restored. This means the files may appear/disappear, things are not deterministic and there are races. Extend the do_package_write_rpm code to handle writing the src.rpm into place to avoid these issues. There are other problems but this avoids races around this file. (From OE-Core rev: c6e151ba7fe0f14044537cf0ab2cac436f1496e3) Signed-off-by: Richard Purdie

update-alternatives: correctly escape PATHs when updating FILES_${PN}

2019-02-06T08:29:06+00:00

The recently added support for updating FILES based on the file renames that are happening here is using a regex replace, but failed to properly escape the search pattern (the full path). This manifests itself in FILES not being updated as soon as the full path contains any character that has a special meaning, e.g. '+'. In other words an original path (alt_target in the code) like /opt/poky/2.6+snapshot/sysroots/i686-pokysdk-linux/sbin/losetup can't be matched, and hence we fail to update FILES with the new value, causing packaging errors. Fix by using re.escape() on the original path before passing into re.sub() Fixes: 5c23fe378732 ("update-alternatives: try to update FILES_${PN} when renaming a file"), or bcb3e7b7f88a in poky.git [YOCTO #13058] (From OE-Core rev: 126743162397e4145902b3f127f2dafd80a8a49b) Signed-off-by: André Draszik Signed-off-by: Richard Purdie

package_rpm/archiver: Apply bandaid to src.rpm creation

2019-02-05T13:53:48+00:00

| error: create archive failed on file /media/build1/poky/build/tmp/work/all-poky-linux/xcursor-transparent-theme/0.1.1+gitAUTOINC+23c8af5ba4-r0/deploy-sources/allarch-poky-linux/xcursor-transparent-theme-0.1.1+gitAUTOINC+23c8af5ba4-r0/xcursor-transparent-theme-0.1.1+git0+23c8af5ba4-r0.src.rpm: cpio: read failed - No such file or directory | Building target platforms: noarch-poky-linux | Building for target noarch-poky-linux This is caused by: $ cat log.task_order do_cleansstate (24289): log.do_cleansstate.24289 do_deploy_archives_setscene (24395): log.do_deploy_archives_setscene.24395 do_fetch (24407): log.do_fetch.24407 [..] do_package_write_rpm (25448): log.do_package_write_rpm.25448 do_package_qa (25451): log.do_package_qa.25451 So do_deploy_archives can run from sstate, created a .src.rpm in WORKDIR/deploy-sources, then it was removed when rpm was running. This leads to a broken Source line in the spec file as the original file was found by the os.listdir(). This fix is just a bandaid over much more fundamental problems sadly. (From OE-Core rev: a10020ace4c3cd863c782760f7cbecea557ec6e7) Signed-off-by: Richard Purdie

update-alternatives: try to update FILES_${PN} when renaming a file

2019-02-02T11:05:59+00:00

When using update-alternatives, FILES_${PN} must be referencing the new name after update-alternatives has renamed files. This is more or less OK when having static lists of files to be packaged into a package, but makes it quite hard to dynamically generate FILES_${PN}, e.g. using do_split_packages(), as in that case we can not easily modify what goes into FILES_${PN}, because that list is based on filenames as seen at the time do_split_packages() is executing. Of couse one could explicitly specify the (renamed) file(s) in the recipe, but that contradicts the intended usage of do_split_packages(). Instead, if FILES_${PN} contains the file name as it was pre renaming, we here modify this to reflect the new name. This will allow usage of do_split_packages() to populate FILES_${PN}. [YOCTO #13058] (From OE-Core rev: 5c23fe378732038643a450cbf916334d24764b70) Signed-off-by: André Draszik Signed-off-by: Richard Purdie

update-alternatives: convert file renames to PACKAGE_PREPROCESS_FUNCS

2019-02-02T11:05:59+00:00

At the moment, the update-alternatives file renaming is happening right after copying into PKGD during packaging time using an _append OVERRIDE to the copy function perform_packagecopy(). This is not really readable and hard to maintain. Additionally, this makes it impossible to e.g. populate PACKAGES dynamically using do_split_packages() and still do update-alternatives - update-alternatives file renaming requires the PACKAGES variable to have been fully populated to work correctly. On the other hand, do_split_packages() can only execute after perform_packagecopy(), as it needs PKGD populated; so it's impossible to insert do_split_packages() early enough in a deterministic way in this use-case. As there doesn't seem to be a reason not to, convert this to a proper function and use PACKAGE_PREPROCESS_FUNCS instead - after all, that's what this is meant for. No other classes or recipes in oe-core or meta-openembededd seem to have a hard requirement on update-alterantives executing before any other PACKAGE_PREPROCESS_FUNCS, so this should be perfectly fine. The only implication is that if compress_doc is inherited, compressed man-page file names will end up being, e.g. eject.1.util-linux.gz or eject.1.gz.util-linux based on the include of compress_doc.bbclass vs. update-alternatives.bbclass order, but the symlink created (alternative name) will always be correct. This solves both problems: * the code is easier to read / follow * the above described use-case can be accomodated easily [YOCTO #13058] (From OE-Core rev: 8c3db2fa735e5933f842f80321bb3ed38753812d) Signed-off-by: André Draszik Signed-off-by: Richard Purdie

pixbufcache.bbclass: remove a dependency loop introduced by enabling gtk+3-native

2019-01-28T23:14:10+00:00

(From OE-Core rev: f99921554fddef82eb80568125aa646a27859a4b) Signed-off-by: Alexander Kanavin Signed-off-by: Richard Purdie

classes/icecc: Add ICECC_REMOTE_CPP variable

2019-01-28T23:14:10+00:00

Newer versions of Icecream (1.2) add support for remotely pre-processing files, controllable with the ICECC_REMOTE_CPP environment variable. (From OE-Core rev: 8fe6728536bbee814c421afbbaa2022e0da0f65c) Signed-off-by: Joshua Watt Signed-off-by: Richard Purdie

Change default debug split to make separate source packages

2019-01-28T23:14:09+00:00

Changes the default PACKAGE_DEBUG_SPLIT_STYLE to generate separate source and debug packages. SDKIMAGE_FEATURES is updated to include the source packages so that there is not change for the SDK contents. [YOCTO #12931] (From OE-Core rev: 8df14b678e44cc749b361224af05ccbcfa9ae9b5) Signed-off-by: Joshua Watt Signed-off-by: Richard Purdie

package: Add pkg_postinst_ontarget to PACKAGEVARS

2019-01-26T13:39:37+00:00

Changes to pkg_postinst_ontarget were not triggering rebuilds, this fixes that. [YOCTO #13127] (From OE-Core rev: 432d5a5481bd8efb848b95fbe6500a72fba9ac65) Signed-off-by: Richard Purdie