linux/poky.git/meta/classes/package_rpm.bbclass, branch sumo-next

package_rpm/archiver: Apply bandaid to src.rpm creation

2019-02-25T22:27:46+00:00

| error: create archive failed on file /media/build1/poky/build/tmp/work/all-poky-linux/xcursor-transparent-theme/0.1.1+gitAUTOINC+23c8af5ba4-r0/deploy-sources/allarch-poky-linux/xcursor-transparent-theme-0.1.1+gitAUTOINC+23c8af5ba4-r0/xcursor-transparent-theme-0.1.1+git0+23c8af5ba4-r0.src.rpm: cpio: read failed - No such file or directory | Building target platforms: noarch-poky-linux | Building for target noarch-poky-linux This is caused by: $ cat log.task_order do_cleansstate (24289): log.do_cleansstate.24289 do_deploy_archives_setscene (24395): log.do_deploy_archives_setscene.24395 do_fetch (24407): log.do_fetch.24407 [..] do_package_write_rpm (25448): log.do_package_write_rpm.25448 do_package_qa (25451): log.do_package_qa.25451 So do_deploy_archives can run from sstate, created a .src.rpm in WORKDIR/deploy-sources, then it was removed when rpm was running. This leads to a broken Source line in the spec file as the original file was found by the os.listdir(). This fix is just a bandaid over much more fundamental problems sadly. (From OE-Core rev: a10020ace4c3cd863c782760f7cbecea557ec6e7) (From OE-Core rev: 6d56e912fbbaa22830b4da5ab230586a3d15b23e) Signed-off-by: Richard Purdie Signed-off-by: Armin Kuster Signed-off-by: Richard Purdie

archiver/package_rpm: Fix the worst src.rpm generation race

2019-02-25T22:27:46+00:00

The package_rpm code is writing outside the task's sstate directory into the sstate of do_deploy_archives. This is "out of spec" since if the task is installed from sstate, the files are not restored. This means the files may appear/disappear, things are not deterministic and there are races. Extend the do_package_write_rpm code to handle writing the src.rpm into place to avoid these issues. There are other problems but this avoids races around this file. (From OE-Core rev: c6e151ba7fe0f14044537cf0ab2cac436f1496e3) (From OE-Core rev: b119872fb794a36b6eb9ef5e9c42a9c6c991e835) Signed-off-by: Richard Purdie Signed-off-by: Armin Kuster Signed-off-by: Richard Purdie

package_rpm: set _builddir to B not S

2018-03-29T23:31:18+00:00

Recipes which use a shared workdir (e.g. gcc-runtine and libgcc) can race over temporary files causing interesting build failures. Using B instead of S avoids this problem. [YOCTO #12605] (From OE-Core rev: d6c13a5ff441f7076eb327c0d0b747bd7603db0f) Signed-off-by: Richard Purdie

package.bbclass: run pre/post installation/removal scriptlets using sh -e

2018-03-15T13:27:18+00:00

This allows catching errors in the scriptlets which would otherwise go unnoticed, e.g. this sequence: ==== bogus_command proper_command ==== would work just fine without any visible warnings or errors. This was previously done only for rpm packages; this patch replaces the rpm-specific tweak with one that works for all package types. (From OE-Core rev: a0aa12e1d0ea9064b8dd816d4e82238df765506b) Signed-off-by: Alexander Kanavin Signed-off-by: Richard Purdie

package_rpm.bbclass: run pre/post installation scriptlets using sh -e

2018-01-30T11:50:12+00:00

This allows catching errors in the scriptlets which would otherwise go unnoticed, e.g. this sequence: ==== bogus_command proper_command ==== would work just fine. Note that this patch needs all of the preceding patches, as otherwise running failing scriptlets with -e would defer them to first boot, instead of properly reporting failure and aborting the package installation. (From OE-Core rev: 3cd8a55d5298ce9cc176e402fdb727abb26a1a4c) Signed-off-by: Alexander Kanavin Signed-off-by: Richard Purdie

package_rpm.bbclass: improve reproducibility of RPM packages

2018-01-29T08:49:50+00:00

The RPM packages contain BUILDHOST based on the current build host. This breaks reproducibility if the same package is build on two different hosts. To improve reproducible builds, we always set BUILDHOST as "reproducible". (From OE-Core rev: f3beb683380ec0d9efa0d6af83205350afd1b2de) Signed-off-by: Juro Bystricky Signed-off-by: Ross Burton Signed-off-by: Richard Purdie

package_rpm.bbclass: Fix matching of architecture independent packages

2018-01-29T08:49:50+00:00

OE-Core changes the architecture independent RPM packages to use "noarch" instead of "all". This change has been included in the commit below: ,---- | commit 341810aff923ace6b1cc1e15e19383c4f8773b51 | Author: Alexander Kanavin | Date: Mon Jan 9 16:37:28 2017 +0200 | | package_rpm.bbclass: make architecture-independent .rpm packages | "noarch" instead of "all" | | Too many places in dnf/rpm4 stack make that assumption; let's not | fight against it. | | Signed-off-by: Alexander Kanavin `---- This is causing problems with machines that has "all" inside the machine name. Reported-by: Alexandru Palalau (From OE-Core rev: 3e4ddeab65d4d2e4aaf03d442c2a1a8c7a2ce8a2) Signed-off-by: Otavio Salvador Signed-off-by: Ross Burton Signed-off-by: Richard Purdie

package_rpm: correctly handle LICENSE_${PN}

2018-01-26T13:09:09+00:00

RPM spec files don't distinguish between spec-level license and the primary package license, so always output the License for every package (defaulting to the recipe-wide license) and use LICENSE_${PN} if set for the primary package. As the primary use of package_rpm is to generate built packages, this fixes the license fields in the generated packages. [ YOCTO #12057 ] (From OE-Core rev: 8c333e592fa7a3a887c792ac14e5cde2141b5d35) (From OE-Core rev: 42e0de37d18f072dc5dcf5dc45cb441e4c2110d8) Signed-off-by: Ross Burton Signed-off-by: Richard Purdie

package_rpm.bbclass: clamp timestamps

2018-01-05T11:55:35+00:00

Improve binary reproducibility of RPM packages. Ensure timestamps in RPM packages are not later than the value of SOURCE_DATE_EPOCH. If SOURCE_DATE_EPOCH is not set, timestamps are not clamped. (From OE-Core rev: 225a7156d1fb2fbffadf38e4f4e491f053358082) Signed-off-by: Juro Bystricky Signed-off-by: Richard Purdie

package_rpm.bbclass: Filter out unwanted file deps for nativesdk packages

2017-08-16T23:21:14+00:00

Filter out any file dependencies on absolute paths and any dependencies on Perl modules for nativesdk packages. It is assumed that they will be provided by the native host if needed, and they mess up the dependency handling if they are present. (From OE-Core rev: ce55e6c6d8b654b5fb21dec8180b471bfd33601a) Signed-off-by: Peter Kjellerstedt Signed-off-by: Mark Hatle Signed-off-by: Richard Purdie