linux/poky.git/meta/classes-recipe, branch yocto-5.1

image_qa: fix error handling

2024-09-17T11:16:01+00:00

Make ImageQAFailed inherit BBHandledException so exceptions raised in tests are catched when the actual test function is executed by bb.utils.better_exec. Change the do_image_qa tasks so errors are handled with oe.qa.handle_error. Add some comment to explain this requires to list the test in ERROR_QA or WARN_QA. [YOCTO #14807] https://bugzilla.yoctoproject.org/show_bug.cgi?id=14807 (From OE-Core rev: 905e224849fbbed1719e0add231b00e2d570b3b4) Signed-off-by: Louis Rannou Signed-off-by: Richard Purdie

conf/defaultsetup.conf: Drop TCLIBCAPPEND

2024-09-05T20:50:10+00:00

We've been able to run musl and glibc builds in the same TMPDIR for many years and a separate directory is not required. Most distros disable this value for that reason. Drop support for the variable to make it clear and easy for distros to be able to set multiconfigs which behave consistently for distros which do and don't clear it by dropping it entirely. (From OE-Core rev: ebcd355a32e2711263e22d9b45b502696ecbb4d2) Signed-off-by: Richard Purdie

cml1: add do_savedefconfig

2024-09-05T20:48:47+00:00

Move the do_savedefconfig task definition from u-boot and kernel to cml1.bbclass. There are more recipes which use the kbuild framework and benefit from a do_savedefconfig task. (From OE-Core rev: 2b2ed48903e09196ee20da7f66b1d3689e4a4473) Signed-off-by: Adrian Freihofer Signed-off-by: Richard Purdie

uboot-config: fix devtool modify with kernel-fitimage

2024-09-04T11:38:44+00:00

How to reproduce: - UBOOT_CONFIG must be used. With UBOOT_MACHINE it works fine. A simple example based on oe-core is to modify the beaglebone-yocto.conf file like this: -UBOOT_MACHINE = "am335x_evm_defconfig" +UBOOT_CONFIG = "foo" +UBOOT_CONFIG[foo] = "am335x_evm_defconfig" - A build configuration which inherits the kernel-fitimage.bbclass is needed. For example: MACHINE = "beaglebone-yocto" KERNEL_IMAGETYPE = "Image" KERNEL_IMAGETYPES += " fitImage " KERNEL_CLASSES = " kernel-fitimage " devtool modify linux-yocto devtool build linux-yocto ... | cp: cannot stat '.../linux-yocto-6.6.21+git/am335x_evm_defconfig/.config': No such file or directory | WARNING: .../linux-yocto/6.6.21+git/temp/run.do_configure.2081673:172 exit 1 from 'cp .../linux-yocto-6.6.21+git/am335x_evm_defconfig/.config .../build/workspace/sources/linux-yocto/.config.baseline' The reason for this problem is that the uboot-config.bbclass sets the variable KCONFIG_CONFIG_ROOTDIR to a path that makes sense for u-boot, but not for other recipes. However, the kernel-fitimage.bbclasse, for example, inherits the uboot-config.bbclass, which brings the u-boot-specific path into the kernel build context. This change removes the uboot-specific KCONFIG_CONFIG_ROOTDIR path from recipes other than u-boot itself. (From OE-Core rev: b23581a22619c52724c8e078f29e871e2ee74259) Signed-off-by: Adrian Freihofer Signed-off-by: Richard Purdie

classes/create-spdx-image-3.0: Fix SSTATE_SKIP_CREATION

2024-09-04T11:38:44+00:00

Fixes SSTATE_SKIP_CREATION for do_create_image_spdx (From OE-Core rev: 97cb97c0948db0d46b92fd13ce0a4d5907e22b33) Signed-off-by: Joshua Watt Signed-off-by: Richard Purdie

testexport: support for executing tests over serial

2024-09-01T11:28:10+00:00

Uses TEST_SERIALCONTROL_CMD to open a serial connection to the target and execute commands. This is a drop in replacement for the ssh target, fully supporting the same API. Supported with testexport. To use, set the following in local.conf: - TEST_TARGET to "serial" - TEST_SERIALCONTROL_CMD to a shell command or script which connects to the serial console of the target and forwards that connection to standard input/output. - TEST_SERIALCONTROL_EXTRA_ARGS (optional) any parameters that must be passed to the serial control command. - TEST_SERIALCONTROL_PS1 (optional) A regex string representing an empty prompt on the target terminal. Example: "root@target:.*# ". This is used to find an empty shell after each command is run. This field is optional and will default to "root@{MACHINE}:.*# " if no other value is given. - TEST_SERIALCONTROL_CONNECT_TIMEOUT (optional) Specifies the timeout in seconds for the initial connection to the target. Defaults to 10 if no other value is given. The serial target does have some additional limitations over the ssh target. 1. Only supports one "run" command at a time. If two threads attempt to call "run", one will block until it finishes. This is a limitation of the serial link, since two connections cannot be opened at once. 2. For file transfer, the target needs a shell and the base32 program. The file transfer implementation was chosen to be as generic as possible, so it could support as many targets as possible. 3. Transferring files is significantly slower. On a 115200 baud serial connection, the fastest observed speed was 30kbps. This is due to overhead in the implementation due to decisions documented in #2 above. (From OE-Core rev: d817b27d73d29ba2beffa2e0a4e31a14dbe0f1bf) Signed-off-by: Andrew Oppelt Signed-off-by: Matthew Weber Signed-off-by: Chuck Wolber -- Tested with core-image-sato on real hardware. TEST_SERIALCONTROL_CMD was set to a bash script which connected with telnet to the target. Additionally tested with QEMU by setting TEST_SERIALCONTROL_CMD to "ssh -o StrictHostKeyChecking=no root@192.168.7.2". This imitates a serial connection to the QEMU instance. Steps: 1) Set the following in local.conf: - IMAGE_CLASSES += "testexport" - TEST_TARGET = "serial" - TEST_SERIALCONTROL_CMD="ssh -o StrictHostKeyChecking=no root@192.168.7.2" 2) Build an image - bitbake core-image-sato 3) Run the test export - bitbake -c testexport core-image-sato 4) Run the image in qemu - runqemu nographic core-image-sato 5) Navigate to the test export directory 6) Run the exported tests with target-type set to serial - ./oe-test runtime --test-data-file ./data/testdata.json --packages-manifest ./data/manifest --debug --target-type serial Signed-off-by: Alexandre Belloni Signed-off-by: Richard Purdie

systemd.bbclass: Clean up empty parent directories

2024-09-01T10:05:20+00:00

Previously, rm_systemd_unitdir() would remove one parent directory of ${systemd_unitdir} if it was empty after removing ${systemd_unitdir}. rm_sysvinit_initddir() would not remove any parent directory. Thus, if the only directory created in /etc was /etc/init.d, an empty /etc would remain after the cleanup and would be packaged. Simplify rm_systemd_unitdir() and rm_sysvinit_initddir() by rewriting them in shell, and use rmdir -p to remove all empty parent directories. (From OE-Core rev: 73159c0bbc636a08934f47690885d75fd37b701a) Signed-off-by: Peter Kjellerstedt Signed-off-by: Richard Purdie

uboot-sign: fix counters in do_uboot_assemble_fitimage

2024-08-30T20:59:38+00:00

Without unsetting `j` and `k` for each `UBOOT_MACHINE`, `j` and `k` are incremented in the same frequency as `i` and therefore `$j -eq $i` and `$k -eq $i` is always true for the first `type` from `UBOOT_CONFIG` and the first `binary` from `UBOOT_BINARIES`. (From OE-Core rev: 3aef55c7ceb654b0012f20618bfd6ead1ef578b6) Signed-off-by: Paul Gerber Signed-off-by: Richard Purdie

insane: Drop oe.qa.add_message usage

2024-08-29T20:58:19+00:00

Drop the oe.qa.add_message() usage in favour of oe.qa.handle_error() which has code allowing it to be optimised with contains usage. The patch also drops unused return values which we stopped using a while ago and drops the now unneeded function parameters, generally leading to cleaner code. The code should be functionally equivalent. (From OE-Core rev: 9b2eea9fd4eab4f5e12e955738db22091b91f698) Signed-off-by: Richard Purdie

npm: accept unspecified versions in package.json

2024-08-23T08:51:36+00:00

Our current emulation mandates that the package.json contains a version field. Some packages may not provide it when they are not published to the registry. The actual `npm pack` would allow such packages, so should we. This patch adds a default value to allow building such packages. This applies for instance to this package which doesn't declare a version: - https://github.com/cockpit-project/cockpit/blob/23701a555a5af13f998ee4c7526d27fdb5669d63/package.json#L2 v3: - Split bitbake npmsw.py modification in another commit Co-authored-by: Tanguy Raufflet (From OE-Core rev: 470c4c027c2b8bbecf23aa63650a22a312de9aa6) Signed-off-by: Tanguy Raufflet Signed-off-by: Enguerrand de Ribaucourt Signed-off-by: Alexandre Belloni Signed-off-by: Richard Purdie