linux/poky.git/meta-yocto-bsp/conf/machine, branch hardknott

beaglebone-yocto: allow other virtual/bootloader

2021-03-11T14:06:46+00:00

The beaglebone-yocto machine currently hardcodes "u-boot" as a dependency for the image and the wic format, and this prevents one from choosing a different bootloader via: PREFERRED_PROVIDER_virtual/bootloader = "non-u-boot-bootloader" Depending on "virtual/bootloader" instead of "u-boot" fixes this. Cc: Denys Dmytriyenko (From meta-yocto rev: 4c4c8327645457a5d68762ff64b64d4b5845cd20) Signed-off-by: Vivien Didelot Signed-off-by: Richard Purdie

meta-yocto-bsp: Bump the kernel to v5.10

2021-01-13T23:14:06+00:00

Build and boot for all these machines and also explicitly set the preferred kernel version for the x86 machines so that we can override the default setting in oe-core. (From meta-yocto rev: a93344439e01e8aba4ba15d3123ce31b4500add1) Signed-off-by: Kevin Hao Signed-off-by: Richard Purdie

meta-yocto-bsp: use provided variables

2021-01-05T13:48:41+00:00

We already have the following variables defined above IMAGE_BOOT_FILES: SPL_BINARY = MLO KERNEL_IMAGETYPE = zImage KERNEL_DEVICETREE = am335x-bone.dtb am335x-boneblack.dtb am335x-bonegreen.dtb So use them instead of repeating their values. (From meta-yocto rev: be07cc4f4e729905065ac6fbf1d46ebfdd79cf8f) Signed-off-by: Vivien Didelot Signed-off-by: Richard Purdie

meta-yocto-bsp: Bump to the v5.8 kernel

2020-08-26T13:33:05+00:00

Boot test for all the supported boards. There is a kernel config check warning for beaglebone-yocto, the fix [1] has been sent to kernel-meta for merging. [1] https://lists.yoctoproject.org/g/linux-yocto/message/8992 (From meta-yocto rev: ccc825335f257ca2259440c561eea02538edd762) Signed-off-by: Kevin Hao Signed-off-by: Richard Purdie

meta-yocto-bsp: Bump to the v5.4 kernel for the non-x86 boards

2020-02-14T13:08:37+00:00

Build and boot test for the beaglebone and edgerouter. (From meta-yocto rev: db4247b8c95ec997fa90226a49df36d7366c469f) Signed-off-by: Kevin Hao Signed-off-by: Richard Purdie

conf/machine: Remove mpc8315e-rdb machine

2020-02-02T10:38:55+00:00

This hardware is old/obsolete and unobtainable. Its proving hard to support with nobody fixing bugs or helping keep the platform running/up to date. Whilst there is value in real hardware testing, this platform ist just too old and obsolete to support. This does leave a gap for the power architecture but at this point there is nobody willing to step up to cover it. The TSC did discuss and agree support for this platform should be removed. It calls into question the support/testing of the architecture by Yocto Project which is being discussed by the TSC and governing board. (From meta-yocto rev: aa691d49ceb6700eb1881b789fe34f8369bcb0ef) Signed-off-by: Richard Purdie

genericx86: wic wks do not hardcode loader

2019-12-15T09:08:43+00:00

replace .wks with .wks.in and refer loader to EFI_PROVIDER to enable different bootloader. soft assign default EFI_PROVIDER "grub-efi" for genericx86. (From meta-yocto rev: 11ecd2febed95e923c8cc68e2c438cd846a88d02) Signed-off-by: Chee Yang Lee Signed-off-by: Richard Purdie

meta-yocto-bsp: Bump to the v5.2 kernel

2019-09-06T07:25:29+00:00

Boot test for all the supported boards. Also drop the v5.0 bbappend since we no plan to support it anymore. There are some kernel_configcheck warning when building some boards, the patches [1] for them have been sent to kernel-meta for merging. [1] https://lists.yoctoproject.org/pipermail/linux-yocto/2019-August/007908.html (From meta-yocto rev: c6e974e12c1d7fe0d155b6cf1bc0c1f4a6ee69d0) Signed-off-by: Kevin Hao Signed-off-by: Bruce Ashfield Signed-off-by: Richard Purdie

beaglebone: use the default of 256M rather than 512M

2019-08-29T13:05:12+00:00

This is done for the sake of using the same default everywhere; see here for details: http://lists.openembedded.org/pipermail/openembedded-core/2019-August/285900.html (From meta-yocto rev: f4ba98ed3c866ec3db90404f894d5aeaa5d79dfd) Signed-off-by: Alexander Kanavin Signed-off-by: Richard Purdie

genericx86-64.conf/genericx86.conf: add QB_SYSTEM_NAME

2019-08-07T15:08:56+00:00

QB_SYSTEM_NAME set in qemuboot-x86.inc will be removed, so set QB_SYSTEM_NAME in these two configuration files. (From meta-yocto rev: 6748c925817da0e7ae2a84d1214e3595515962b5) Signed-off-by: Changqing Li Signed-off-by: Richard Purdie