linux/poky.git/documentation/ref-manual/figures, branch uninative-1.7

dev-manual, ref-manual: Moved "Workflows" section to ref-manual

2017-06-22T08:16:43+00:00

Fixes [YOCTO #11630] I moved the "Workflows" section to the ref-manual. This section is primarily concepts and needs to be out of the dev-manual, which is being reconstituted into a "how-to" manual. (From yocto-docs rev: 2f8bfaac3da9e2d7042ea381a3e8957f96b5bf5a) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie

documentation: Moved "Yocto Project Source Repositories" section

2017-06-22T08:16:43+00:00

Fixes [YOCTO #11630] The "Yocto Project Source Repositories" section is purely conceptual and thus does not belong in the reconstituted dev-manual, which is converting to a "how-to" manual. I have moved this section to the ref-manual under "The Yocto Project Development Environment" section. Moving the section affected several things. Three figures that where in the dev-manual were copied and moved to the figures folder of the ref-manual. This required deleting them from the dev-manual and adding them to the ref-manual. The makefile had to be edited to move those figures into the ref-manual and delete them from the latest version of the dev-manual in order for the tarball of files to be correct when the manuals are made. Links to anchors within the moved section had to be fixed in various manuals. Links to the main section "id" had to be fixed to point to the ref-manual manual. (From yocto-docs rev: c619ae2bbc6be93cb0324ca44e936eefec12b28c) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie

documentation: devtool upgrade and quick ref changes to mult manuals

2016-09-28T14:02:32+00:00

Did the following: * Added the devtool upgrade flow to the SDK manual. * Removed the devtool Quick Reference from the dev-manual and added it as a new chapter to the ref-manual. * Made sure all the links and cross-references work now with the moved material. * Updated the Make file so that the manual set builds correctly regarding the new chapter in the ref-manual. * Created cross-referencing notes in both the sdk-manual and the dev-manual to the newly located devtool Quick Reference chapter. (From yocto-docs rev: fda0bf68b3654b1b96407d552c5254657465b5fc) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie

documentation: Converted "meta-yocto" to "meta-poky"

2016-04-18T15:28:24+00:00

Occurrences in many manuals and one figure. (From yocto-docs rev: 26d30cd162083c62216fb4ab526d0b231f453de1) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie

dev-manual, mega-manual: Updated "Application Development SDK" section.

2016-03-11T23:06:06+00:00

I updated the figure for this section to include some stuff for the extensible SDK. I updated the text supporting the figure to cover the different SDKs and the different SDK variable sets. (From yocto-docs rev: 5aafab3e2e841293ddba45dfd8683cbdc223ed7c) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie

ref-manual, mega-manual: Updated "SDK Generation" section.

2016-03-11T23:06:06+00:00

Updated the figure used to show SDK generation. I added a block to cover the extensible SDK stuff. This affected the figures folder in both the ref-manual and the mega-manual. Updated the text section to support the new figure. (From yocto-docs rev: b9fd7c2b0ea0e2fe1805a1bb1eb1bcb82c807b66) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie

ref-manual: Updated the SDK figure.

2016-01-29T17:04:47+00:00

Added the SDKPATH variable to figure. It was missing. Also, had to adjust the display parameters to get it to display decently. (From yocto-docs rev: 4862288ab4675051ec6fc93927839da7eb3634b6) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie

ref-manual, mega-manual: Updated the Image Creation figure

2016-01-29T17:04:47+00:00

The old version was off schematically. Moved some boxes around and created more detail to reflect technical correctness. (From yocto-docs rev: 7793101e6866c0c58d0f1202fb04769a21f2f882) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie

yocto-project-qs and others: Rewrite of the QS

2015-07-28T17:02:32+00:00

This was a complete re-write of the YP Quick Start in an attempt to streamline it, remove unecessary detail, and make it flow better with the examples. In doing so, many manuals were affected due to section headings being renamed, information being moved, etc. Here is a list of the changes by manual: Makefile - Removed two figures from TARFILE list for the yocto-project-qs. Added building-an-image.png to the ref-manual TARFILE list. Added using-a-pre-build-image.png to the adt-manual TARFILE list. Repositioned 'eclipse' in the adt-manual TARFILE list. adt-manual: Fixed a cross-reference so that it goes to the new 'Building Images' section that is within the YP QS. Added new section 'Example Using Pre-Build Binaries and QEMU' to hold the information that was formerly in YP QS. dev-manual: Removed a cross-reference into the YP QS that promised how to configure the most efficent build. Changed a cross-reference into the YP QS from 'The Packages' to 'The Build System Packages'. Changed a cross-reference into the YP QS from 'Building an Image' to 'Building Images'. Changed a text reference from the YP QS to the adt-manual. Moved the bit about getting YP files by using the YP website from the YP QS to the dev-manual. Changed a cross-reference into the YP QS from 'Using Pre-Built Binaries and QEMU' to 'Example Using Pre-built Binaries and QEMU', which was moved to the adt-manual. ref-manual: Changed a cross-reference into the YP QS from 'What You Need and How You Get It' to 'Setting Up to Use the Yocto Project'. Moved the note about if your system has oss4-dev in the packages area in the YP QS to the appropriate area in the ref-manual. Moved the introduction information regarding building an image along with the figure from YP QS to the ref-manual's section on building images. toaster-manual: Changed a cross-reference into the YP QS from 'What You Need and How You Get It' to 'Setting Up to Use the Yocto Project'. yocto-project-qs: Complete rewrite that changed many section headings and removed much detail, which was placed in other manuals. (From yocto-docs rev: da4ed8147b04963a700caa784bda709c57b4eb6e) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie

ref-manual; mega-manual: Edits to further define packaging process

2015-05-03T10:49:34+00:00

In response to community input where developers were attempting to locate information on how to write packages out to a directory other than ${DEPLOY_DIR}/, I updated the "Package Feeds" section, added several new DEPLOY_DIR_* variables, updated four classes, and updated four tasks. Here are some details: * Made changes to the "Package Feeds" section to provide more accurate information in the package feeds directory structure used by the build system in build/tmp. These changes included updating the figure itself and some explanatory text. * Updated the DEPLOY_DIR variable description. * Added new variable descriptions for DEPLOY_DIR_DEB, DEPLOY_DIR_IPK, DEPLOY_DIR_RPM, and DEPLOY_DIR_TAR. * Updated the related classes: package_deb, package_ipk, package_rpm, and package_tar. * Updated the related tasks: do_package_write_deb, do_package_write_ipk, do_package_write_rpm, and do_package_write_tar. Reported-by: Trieu Nguyen (From yocto-docs rev: e8742267506bf9359346cfcd3965f762ed2c7d6f) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie