linux/poky.git/documentation/dev-manual/dev-manual-common-tasks.xml, branch uninative-1.7

dev-manual: Fixed Flash the Device example

2017-07-11T23:28:16+00:00

Fixes [YOCTO #11774] Updated bmaptool instructions in Flashing Images Using bmaptool section by changing the sudo command. Fixed the oe-run-native line. (From yocto-docs rev: c3a1e2882abbb7b682ce101a8b038f89c4e2261c) Signed-off-by: Kristi Rifenbark Signed-off-by: Richard Purdie

dev-manual: Updated the section on initramfs

2017-07-11T23:28:15+00:00

I did a rewrite of the section to get it into a procedural form. Missing some technical information and needs a review but it is the best that can be done at this time. The code for initrd is not settled. (From yocto-docs rev: 0fdef8c5fed6ac510d1604a677e6546494b4c96b) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie

documentation: Moved devtool workflow to sdk manual

2017-07-11T23:28:15+00:00

Fixes [YOCTO #11630] The section on the devtool workflow in the dev-manual was 99% identical to what was in the sdk-manual. I have moved the workflow procedure from the old "Model" chapter of the dev-manual to be merged with what was in the sdk-manual. In truth, the only things added were a note about devtool not being exclusive to SDK development. The result of moving (deleting) this section was that the "model" chapter of the dev-manual went away. The devtool stuff, Quilt, devshell, and python shell are all out now and there is no chapter left. So, mega-manual had to be adjusted to not pull that chapter in when building the dev-manual. I had to delete three figures that were used in the flow. The figures were already replicated in the sdk-manual. The figures were deleted from the figures folder of both the dev-manual and the mega-manual. I had to make sure all references to the old devtool stuf in the YP doc set were adjusted. (From yocto-docs rev: 5dbd643d31ab502df53a22229e457a03da7772b7) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie

dev-manual: Moved devshell and python shell workflow sections.

2017-07-11T23:28:15+00:00

Fixes [YOCTO #11630] These two sections can stand alone as tasks. I moved them to the "Common Tasks" chapter. (From yocto-docs rev: 60c810a9682f8a110fe7c7e4d0d40583a7d72735) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie

dev-manual: Moved "Using Quilt in Your Workflow" to tasks

2017-07-11T23:28:15+00:00

Fixes [YOCTO #11630] The section on useing Quilt can be a stand-alone task. I moved it to the "Common Tasks" chapter. (From yocto-docs rev: bb84b88fc8fc7f82e7bbe580d408ae7880f38d8b) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie

dev-manual: Moved "Finding Temporary Source Code"

2017-07-11T23:28:15+00:00

Fixes [YOCTO #11630] This section can stand as a separate task. I have moved it to the Common Tasks chapter. (From yocto-docs rev: e4fb1ce8b160528aae0f192add614a595b2560a3) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie

dev-manual: Moved the "Flashing Images using bmaptool" section.

2017-07-11T23:28:14+00:00

Fixes [YOCTO #11630] Moved this section from the "Getting Started with the Yocto Project" section. The topic is not really a getting started topic. It is better suited in the "Common Tasks" chapter. (From yocto-docs rev: d6cdade9066bdbce0596672978c178d2ec82c9a4) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie

dev-manual: Fixed poor cross-reference

2017-07-11T23:28:14+00:00

Was referencing the "Building Images" section when should have been referencing the "Images" section in the ref-manual. (From yocto-docs rev: 7340b358d57c110240e75c1164226144065120b7) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie

dev-manual: Updated Using RPM example

2017-07-11T23:28:13+00:00

Fixes [YOCTO #11699] Configuration example didn't work with "" around baseurl. Removed "". (From yocto-docs rev: c40d818fb92904b74e677749ee16c52716dd02a9) Signed-off-by: Kristi Rifenbark Signed-off-by: Richard Purdie

documentation: Changes section head for sumbitting change to YP

2017-06-22T08:16:44+00:00

Fixes [YOCTO #11630] I changed the section heading for the section that describes how to make a change to the YP. It was passive. I need it to be active and in line with the "how-to" dev-manual. (From yocto-docs rev: 340e1b6ab9806ec11ec894d4472bc2c937c2b058) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie