linux/poky.git/documentation/adt-manual/adt-prepare.xml, branch hardknott-next

sphinx: remove DocBook files

2020-10-06T12:56:17+00:00

The Yocto Project documentation was migrated to Sphinx. Let's remove the deprecated DocBook files. (From yocto-docs rev: 28fb0e63b2fbfd6426b00498bf2682bb53fdd862) Signed-off-by: Nicolas Dechesne Signed-off-by: Richard Purdie

sphinx: replace special quotes with single and double quotes

2020-09-17T09:09:36+00:00

(From yocto-docs rev: 0aeb7a94abcef3cb3850c753dd0a243f381e6675) Signed-off-by: Quentin Schulz Signed-off-by: Nicolas Dechesne Signed-off-by: Richard Purdie

adt-manual: Add SPDX license headers

2020-06-17T15:45:36+00:00

[Yocto #13873] (From yocto-docs rev: b2d60520431ef71ed2d1decf33605797995cb8f4) Signed-off-by: Armin Kuster Signed-off-by: Richard Purdie

adt-manual: Updated the build toolchain section with more detail.

2015-10-21T22:06:22+00:00

Fixes [YOCTO #8368] Apparently there is confusion on how to build a cross-toolchain using Eclipse and the Yocto plug-in. Specifically on setting the MACHINE variable, the bblayers.conf stuff, and the preferences in Eclipse to find things. I added a couple key things to the section that describes using the OpenEmbedded build system to build out the toolchain. (From yocto-docs rev: 68c399e2560600cb3a5951c93d51e2cf1f610ff9) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie

yocto-project-qs and others: Rewrite of the QS

2015-07-28T17:02:32+00:00

This was a complete re-write of the YP Quick Start in an attempt to streamline it, remove unecessary detail, and make it flow better with the examples. In doing so, many manuals were affected due to section headings being renamed, information being moved, etc. Here is a list of the changes by manual: Makefile - Removed two figures from TARFILE list for the yocto-project-qs. Added building-an-image.png to the ref-manual TARFILE list. Added using-a-pre-build-image.png to the adt-manual TARFILE list. Repositioned 'eclipse' in the adt-manual TARFILE list. adt-manual: Fixed a cross-reference so that it goes to the new 'Building Images' section that is within the YP QS. Added new section 'Example Using Pre-Build Binaries and QEMU' to hold the information that was formerly in YP QS. dev-manual: Removed a cross-reference into the YP QS that promised how to configure the most efficent build. Changed a cross-reference into the YP QS from 'The Packages' to 'The Build System Packages'. Changed a cross-reference into the YP QS from 'Building an Image' to 'Building Images'. Changed a text reference from the YP QS to the adt-manual. Moved the bit about getting YP files by using the YP website from the YP QS to the dev-manual. Changed a cross-reference into the YP QS from 'Using Pre-Built Binaries and QEMU' to 'Example Using Pre-built Binaries and QEMU', which was moved to the adt-manual. ref-manual: Changed a cross-reference into the YP QS from 'What You Need and How You Get It' to 'Setting Up to Use the Yocto Project'. Moved the note about if your system has oss4-dev in the packages area in the YP QS to the appropriate area in the ref-manual. Moved the introduction information regarding building an image along with the figure from YP QS to the ref-manual's section on building images. toaster-manual: Changed a cross-reference into the YP QS from 'What You Need and How You Get It' to 'Setting Up to Use the Yocto Project'. yocto-project-qs: Complete rewrite that changed many section headings and removed much detail, which was placed in other manuals. (From yocto-docs rev: da4ed8147b04963a700caa784bda709c57b4eb6e) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie

adt-manual: Updated the "Getting the Images" section for eclipse-debug

2015-07-28T17:02:29+00:00

The way to include tcf-agent now in an image that you are going to remotely deploy and debug using the Eclipse IDE is to simply include the eclipse-debug image feature as part of the image. I updated the section around getting images to reflect this simple method. Reported-by: Adam Lee (From yocto-docs rev: 9aec91d7f4fda558baa0e8a0290b42d76e735c63) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie

adt-manual: Emphasis on populate_sdk as bitbake method for building toolchain

2015-07-28T17:02:28+00:00

I updated the "Optionally Building a Toolchain Installer" section to emphasize using 'bitbake -c populate_sdk' as the method for building outa toolchain. Before the change, equal emphasis was put on for this preferred method and the 'bitbake meta-toolchain' method. (From yocto-docs rev: 447ad6167570bf1bd227771153de421d1154443d) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie

adt-manual, ref-manual: Detail on using an external toolchain.

2015-02-17T15:17:03+00:00

Fixes [YOCTO #4907] I created a new section in the toolchain chapter of the adt-manual called "optionally Using an External Toolchain". This provides some fundamental information for the user that wants to use an external toolchain. Additionally, it references Mentor Graphics Sourcery toolchain as an example. In the ref-manual, I updated the TCMODE variable description to better integrate the MGC Sourcery toolchain as the overriding example. (From yocto-docs rev: 51e9c3b88f7e5a16da2aa101589b0f2612fff11d) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie

adt-manual, ref-manual: Review edits for xcross-toolchain additions.

2015-02-17T15:16:55+00:00

Mark Hatle reviewed the section and I updated some things based off his input. A rewrite to the "Makefile-Based Projects" section to get it technically correct. Also, removed all SDKROOT documentation from both the adt-manual and ref-manual. Fixes [YOCTO #7133] (From yocto-docs rev: dd785777834611d94868a3774f2eb21ffc081b1a) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie

adt-manual: Remaining mods to clarify xtoolchain env use

2015-02-17T15:16:55+00:00

Fixes [YOCTO #7133] Edits to add more clarification for use and role of the cross-toolchain environment variables established when a user runs the cross-toolchain environment setup script. (From yocto-docs rev: 2c3fa3a838a3a8970cd112935e903c96552ed06b) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie