diff options
Diffstat (limited to 'conf')
| -rw-r--r-- | conf/machine/boards/zedboard/zedboard-zynq7-board.dtsi | 79 | ||||
| -rw-r--r-- | conf/machine/boards/zedboard/zedboard-zynq7.dts | 5 | ||||
| -rw-r--r-- | conf/machine/zedboard-zynq7.conf | 9 |
3 files changed, 3 insertions, 90 deletions
diff --git a/conf/machine/boards/zedboard/zedboard-zynq7-board.dtsi b/conf/machine/boards/zedboard/zedboard-zynq7-board.dtsi deleted file mode 100644 index 2ccfe1cc..00000000 --- a/conf/machine/boards/zedboard/zedboard-zynq7-board.dtsi +++ /dev/null | |||
| @@ -1,79 +0,0 @@ | |||
| 1 | /* | ||
| 2 | * ZedBoard DTS file header for generic boot. | ||
| 3 | */ | ||
| 4 | |||
| 5 | / { | ||
| 6 | model = "ZedBoard"; | ||
| 7 | chosen { | ||
| 8 | bootargs = "console=ttyPS0,115200 earlyprintk root=/dev/ram rw"; | ||
| 9 | linux,stdout-path = "/axi@0/serial@e0001000"; | ||
| 10 | } ; | ||
| 11 | ps7_ddr_0: memory@0 { | ||
| 12 | device_type = "memory"; | ||
| 13 | reg = <0x0 0x20000000>; | ||
| 14 | } ; | ||
| 15 | ps7_axi_interconnect_0: amba@0 { | ||
| 16 | ps7_ethernet_0: ps7-ethernet@e000b000 { | ||
| 17 | phy-handle = <&phy0>; | ||
| 18 | phy-mode = "rgmii-id"; | ||
| 19 | phy0: phy@0 { | ||
| 20 | compatible = "marvell,88e1518", "marvell,88e1510"; | ||
| 21 | device_type = "ethernet-phy"; | ||
| 22 | reg = <0>; | ||
| 23 | marvell,reg-init = <3 16 0xff00 0x1e 3 17 0xfff0 0x0a>; | ||
| 24 | } ; | ||
| 25 | } ; | ||
| 26 | ps7_usb_0: ps7-usb@e0002000 { | ||
| 27 | xlnx,phy-reset-gpio = <&ps7_gpio_0 85 0>; | ||
| 28 | usb-phy = <&usb0_phy>; | ||
| 29 | } ; | ||
| 30 | ps7_qspi_0: ps7-qspi@e000d000 { | ||
| 31 | flash@0 { | ||
| 32 | compatible = "spansion,s25fl256s0", "jedec,spi-nor"; | ||
| 33 | reg = <0x0>; | ||
| 34 | spi-tx-bus-width = <1>; | ||
| 35 | spi-rx-bus-width = <4>; | ||
| 36 | spi-max-frequency = <50000000>; | ||
| 37 | #address-cells = <1>; | ||
| 38 | #size-cells = <1>; | ||
| 39 | partition@qspi-fsbl-uboot { | ||
| 40 | label = "qspi-fsbl-uboot"; | ||
| 41 | reg = <0x0 0x100000>; | ||
| 42 | }; | ||
| 43 | partition@qspi-linux { | ||
| 44 | label = "qspi-linux"; | ||
| 45 | reg = <0x100000 0x500000>; | ||
| 46 | }; | ||
| 47 | partition@qspi-device-tree { | ||
| 48 | label = "qspi-device-tree"; | ||
| 49 | reg = <0x600000 0x20000>; | ||
| 50 | }; | ||
| 51 | partition@qspi-rootfs { | ||
| 52 | label = "qspi-rootfs"; | ||
| 53 | reg = <0x620000 0x5E0000>; | ||
| 54 | }; | ||
| 55 | partition@qspi-bitstream { | ||
| 56 | label = "qspi-bitstream"; | ||
| 57 | reg = <0xC00000 0x400000>; | ||
| 58 | }; | ||
| 59 | }; | ||
| 60 | } ; | ||
| 61 | |||
| 62 | /* Disabled Devices */ | ||
| 63 | ps7_sd_1: ps7-sdio@e0101000 { compatible = "invalid"; }; | ||
| 64 | ps7_uart_0: serial@e0000000 { compatible = "invalid"; }; | ||
| 65 | ps7_ethernet_1: ps7-ethernet@e000c000 { compatible = "invalid"; }; | ||
| 66 | ps7_i2c_0: ps7-i2c@e0004000 { compatible = "invalid"; }; | ||
| 67 | ps7_i2c_1: ps7-i2c@e0005000 { compatible = "invalid"; }; | ||
| 68 | ps7_wdt_0: ps7-wdt@f8005000 { compatible = "invalid"; }; | ||
| 69 | ps7_can_0: ps7-can@e0008000 { compatible = "invalid"; }; | ||
| 70 | ps7_can_1: ps7-can@e0009000 { compatible = "invalid"; }; | ||
| 71 | ps7_usb_1: ps7-usb@e0003000 { compatible = "invalid"; }; | ||
| 72 | } ; | ||
| 73 | |||
| 74 | usb0_phy: usb-phy { | ||
| 75 | #phy-cells = <0>; | ||
| 76 | compatible = "usb-nop-xceiv"; | ||
| 77 | reset-gpios = <&ps7_gpio_0 85 1>; /* MIO 85, GPIO_ACTIVE_LOW */ | ||
| 78 | } ; | ||
| 79 | } ; | ||
diff --git a/conf/machine/boards/zedboard/zedboard-zynq7.dts b/conf/machine/boards/zedboard/zedboard-zynq7.dts deleted file mode 100644 index e16e15ba..00000000 --- a/conf/machine/boards/zedboard/zedboard-zynq7.dts +++ /dev/null | |||
| @@ -1,5 +0,0 @@ | |||
| 1 | /dts-v1/; | ||
| 2 | /include/ "zynq7-base.dtsi" | ||
| 3 | /include/ "zedboard-zynq7-board.dtsi" | ||
| 4 | / { | ||
| 5 | } ; \ No newline at end of file | ||
diff --git a/conf/machine/zedboard-zynq7.conf b/conf/machine/zedboard-zynq7.conf index cbf0f012..0eb85e5b 100644 --- a/conf/machine/zedboard-zynq7.conf +++ b/conf/machine/zedboard-zynq7.conf | |||
| @@ -12,16 +12,13 @@ require conf/machine/include/tune-zynq.inc | |||
| 12 | require conf/machine/include/machine-xilinx-default.inc | 12 | require conf/machine/include/machine-xilinx-default.inc |
| 13 | require conf/machine/include/machine-xilinx-board.inc | 13 | require conf/machine/include/machine-xilinx-board.inc |
| 14 | 14 | ||
| 15 | # Zedboard machine definition known by Xilinx UBOOT | 15 | # u-boot configuration |
| 16 | UBOOT_MACHINE = "zynq_zed_config" | 16 | UBOOT_MACHINE = "zynq_zed_config" |
| 17 | SPL_BINARY = "boot.bin" | 17 | SPL_BINARY = "boot.bin" |
| 18 | 18 | ||
| 19 | SERIAL_CONSOLE = "115200 ttyPS0" | 19 | SERIAL_CONSOLE = "115200 ttyPS0" |
| 20 | 20 | ||
| 21 | MACHINE_DEVICETREE := " \ | 21 | KERNEL_DEVICETREE = "zynq-zed.dtb" |
| 22 | zedboard/zedboard-zynq7-board.dtsi \ | ||
| 23 | zedboard/zedboard-zynq7.dts \ | ||
| 24 | " | ||
| 25 | 22 | ||
| 26 | IMAGE_BOOT_FILES += "boot.bin uEnv.txt ${MACHINE}.dtb" | 23 | IMAGE_BOOT_FILES += "boot.bin uEnv.txt ${KERNEL_IMAGETYPE}-zynq-zed.dtb" |
| 27 | 24 | ||
