BOOT.tftp: Update

* Updated use of "tftp" command for zynq, now use "tftpboot" (2014.01
  change)
* Swap kernel and rootfs addresses so that relatively large rootfs
  images will be loaded without overlapping existing contents
* Swap to use cpio.gz.u-boot, this format does not limit rootfs size and
  allows the loading of large rootfs images despite pre-configured
  kernel limitations

Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>

1 files changed, 7 insertions, 7 deletions

diff --git a/docs/BOOT.tftp b/docs/BOOT.tftp
index 3c6b98cf..17d7e3a4 100644
--- a/docs/BOOT.tftp
+++ b/docs/BOOT.tftp
@@ -21,15 +21,15 @@ And then boot Linux using the 'bootm' command. (Note the load addresses will
 be dependant on machine used)
 
 For MicroBlaze (kc705-trd-microblazeel):
-        U-Boot> tftp 0x86000000 linux.bin.ub
-        U-Boot> tftp 0x85000000 core-image-minimal-<machine name>.ext2.gz.u-boot
+        U-Boot> tftp 0x85000000 linux.bin.ub
+        U-Boot> tftp 0x86000000 core-image-minimal-<machine name>.cpio.gz.u-boot
         U-Boot> tftp 0x84000000 linux.bin.ub-<machine name>.dtb
-        U-Boot> bootm 0x86000000 0x85000000 0x84000000
+        U-Boot> bootm 0x85000000 0x86000000 0x84000000
 
 For Zynq:
-        U-Boot> tftp 0x3000000 uImage
-        U-Boot> tftp 0x2000000 core-image-minimal-<machine name>.ext2.gz.u-boot
-        U-Boot> tftp 0x2A00000 uImage-<machine name>.dtb
-        U-Boot> bootm 0x3000000 0x2000000 0x2A00000
+        U-Boot> tftpboot 0x2000000 uImage
+        U-Boot> tftpboot 0x3000000 core-image-minimal-<machine name>.cpio.gz.u-boot
+        U-Boot> tftpboot 0x2A00000 uImage-<machine name>.dtb
+        U-Boot> bootm 0x2000000 0x3000000 0x2A00000
 
 U-Boot will prepare the Kernel for boot and then it will being to initialize.