linux/meta-xilinx.git/meta-xilinx-pynq/README.md, branch masterMirror of git.yoctoproject.org/meta-xilinx.githttps://git.enea.com/cgit/linux/meta-xilinx.git/atom?h=master2022-11-10T23:04:42+00:00meta-xilinx: Deprecate meta-xilinx-pynq layer2022-11-10T23:04:42+00:00Sandeep Gundlupet Rajusandeep.gundlupet-raju@amd.com2022-10-25T19:02:45+00:00urn:sha1:8101d2c1b8961a1a3c999c4260431191119f8bfb
meta-xilinx-pynq is no longer supported from Yocto, hence deprecating
meta-xilinx-pynq layer.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
meta-xilinx: Clean up vendor specific machine configuration files2022-07-28T19:45:08+00:00Sandeep Gundlupet Rajusandeep.gundlupet-raju@xilinx.com2022-05-06T00:50:43+00:00urn:sha1:4cd0ab00c97616b7a608f82c294176c153d94c43
1. Add new metal-xilinx-vendor layer which supports vendor specific
machine configuration files, device-tree, kernel, platform-init etc.
2. Moved below vendor machine conf files, dt and related configs from
meta-xilinx-bsp and meta-xilinx-contrib to meta-xilinx-vendor layer.
- microzed-zynq7.conf
- minized-zynq7.conf
- picozed-zynq7.conf
- zedboard-zynq7.conf
- zybo-zynq7.conf
- zybo-linux-bd-zynq7.conf
- ultra96-zynqmp.conf
3. Obsolete qemu-zynq7, s3adsp1800-qemu-microblazeeb, v350-versal and
vc-p-a2197-00-versal from meta-xilinx-bsp layer. Users should use
zynq-generic.conf for zynq7000 qemu boot should be functionally
equivalent to qemu-zynq7.
4. Add new MAINTAINERS.md file and move maintainers, Mailing list and
Patches content from meta-xilinx-* README.md to MAINTAINERS.md file.
5. Updated README.md file for supported board machines files in
meta-xilinx-bsp, meta-xilinx-contrib and meta-xilinx-vendor layers.
6. Disabled old drm kernel patches for zybo-linux-bd-zynq mahcine in
meta-xilinx-contrib layer as these patches doesn't apply on 5.x
kernel, if we don't hear from patch submitter we will remove these
patches from meta-xilinx-contrib layer.
7. Removed drm kernel cache metadate for zybo-linux-bd-zynq7 machine
as these configs are already available in xilinx_zynq_defconfig.
8. Fixed build issue for u-boot by changing
PREFERRED_PROVIDER_virtual/bootloader from u-boot to u-boot-xlnx.
9. Add meta-xilinx-vendor to bblayers.conf.sample
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@xilinx.com>
Signed-off-by: Mark Hatle <mhatle@xilinx.com>
README.md: Update maintainers list2020-08-12T06:47:26+00:00Sai Hari Chandana Kallurichandana.kalluri@xilinx.com2020-07-30T06:08:20+00:00urn:sha1:293a30c2e311e04eae6918a3ab9a1267a4b03622
Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
meta-xilinx-pynq: Add layer to support PYNQ2019-12-09T19:03:47+00:00Manjukumar Mathamanjukumar.harthikote-matha@xilinx.com2019-09-09T19:13:21+00:00urn:sha1:c7ec582fbf118b29f21141b1ca41ea902fc8d256
This layer collects Yocto recipes required to build and run PYNQ based
examples using jupyter-notebooks on Zynq and ZU+ SoC's.
PYNQ is an open-source project from Xilinx that makes it easy to design
embedded systems with Zynq All Programmable Systems on Chips (APSoCs).
Using the Python language and libraries, designers can exploit the
benefits of programmable logic and microprocessors in Zynq to build more
capable and exciting embedded systems.
See https://github.com/Xilinx/PYNQ for more details and examples
Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
Signed-off-by: Peter Ogden <ogden@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>