linux/meta-virtualization.git/dynamic-layers, branch nanbield

zynqmp-xen-qemu.dtsi: Remove device_type dt nodes

2023-12-19T03:03:35+00:00

Remove device_type device tree nodes as these nodes are no longer required for Xen qemu boot. Signed-off-by: Sandeep Gundlupet Raju Signed-off-by: Bruce Ashfield

xen-boot-cmd: Remove hard assigment for ramdisk image

2023-08-17T20:01:19+00:00

Setting hard assignment for RAMDISK_IMAGE will take precedence during variable pre-expansion. Hence set RAMDISK_IMAGE variable with soft assignment. Signed-off-by: Sandeep Gundlupet Raju Signed-off-by: Bruce Ashfield

recipes-bsp: Add u-boot-xlnx scripts for Xen support

2023-08-01T18:41:45+00:00

Add new boot.cmd.xen to u-boot-xlnx-scr bbappend to enable Xen support for ZynqMP and Versal devices. User can enable xen u-boot script by adding below variable from configuration file. BOOTMODE = "xen" This u-boot script also supports to configure below Xen params from configuration file params variable assignment ------ ------------------- duart XEN_SERIAL_CONSOLES = "serial0" dom0_mem DOM0_MEM = "1500M" dom0_max_vcpus DOM0_MAX_VCPUS = "1" extra params XEN_CMDLINE_APPEND = "loglvl=all" Signed-off-by: Sandeep Gundlupet Raju Signed-off-by: Bruce Ashfield

recipes-bsp: Add device-tree files for Xen support

2023-08-01T18:41:45+00:00

Add device-tree files for Xen support, Earlier all these files were in meta-petalinux layer, Hence move these files to this layer so that users can build Xen without including meta-petalinux. Signed-off-by: Sandeep Gundlupet Raju Signed-off-by: Bruce Ashfield

rpi, xen, linux-yocto: enable linux-yocto 6.1 for RPi4

2023-05-29T13:45:22+00:00

Added to the raspberrypi dynamic layer for use with Xen as the default preference for Linux kernel. Signed-off-by: Christopher Clark Signed-off-by: Bruce Ashfield

rpi: linux-yocto: drop 5.15 bbappend

2023-05-29T13:45:22+00:00

* 5.15 recipe was dropped from oe-core in: https://git.openembedded.org/openembedded-core/commit/?h=master-next&id=e30b37776d16cfd4ce7f79746427ccd95b306059 Signed-off-by: Bruce Ashfield

xen: Make xilinx extension generic

2022-10-26T14:09:57+00:00

Move the xilinx specific bbappend to a wildcard append. Signed-off-by: Mark Hatle Signed-off-by: Bruce Ashfield

dynamic-layers/raspberrypi: drop linux-yocto 5.10 bbappend

2022-08-12T13:32:31+00:00

* the inc file was dropped in: 58f5ac6 kernel: drop 5.10 .inc but this .bbappend still causes parsing error, because 5.10 recipes were removed from oe-core Signed-off-by: Bruce Ashfield

xen, raspberry pi: replace linux-yocto-dev with linux-yocto 5.15

2022-05-25T16:19:57+00:00

The default preferred Linux kernel for Xen on the Raspberry Pi 4 is linux-yocto. The alternative provided option is linux-yocto-dev, but this is unintentionally a branch tracking configuration rather than a fixed revision. Remove the linux-yocto-dev in favour of the linux-yocto kernel version 5.15 which has been tested and verified working on the board. Signed-off-by: Christopher Clark Signed-off-by: Bruce Ashfield

xen, rpi4: Use PARTUUID for rootfs discovery

2021-10-08T11:30:44+00:00

The mmc probing order has become unpredictable due to recent linux kernel changes, therefore devices like the raspberry pi that have two mmc interface most of the time can't boot from the hard-coded root path. Modify the u-boot script to fetch the PARTUUID of the second partition of the sd card and use it to put root=PARTUUID= in the command line passed to the dom0 kernel. Reviewed-by: Diego Sueiro Reviewed-by: Bertrand Marquis Reviewed-by: Christopher Clark Tested-by: Christopher Clark Signed-off-by: Luca Fancellu Signed-off-by: Bruce Ashfield