linux/meta-virtualization.git/conf/distro, branch master-test

xen, rpi4: move rpi4-machine+xen-distro cfg into dynamic layer

2021-04-30T03:05:11+00:00

Improve meta-virt-xen.inc by moving all the Raspberry Pi 4 config settings to a new xen-raspberrypi4-64.inc file in the raspberrypi dynamic layer. The new .inc file is included only for the raspberrypi4-64 MACHINE, so the config settings no longer need to be applied using overrides. Signed-off-by: Christopher Clark Signed-off-by: Bruce Ashfield

xen, rpi4: switch Xen-on-Rpi4 kernel preference to linux-yocto

2021-04-30T03:05:11+00:00

The 5.10 version of the Linux Yocto kernel supports running Xen on the Raspberry Pi 4, so the previous preference for linux-yocto-dev can be replaced. Use the ?= operator to set the kernel preference now since meta-raspberrypi commit e0b4b8c5d introduced use of the weak default for kernel preference in that layer to allow this here. KERNEL_DEVICETREE needs to be set to match the build outputs of the selected kernel, in this case: "broadcom/bcm2711-rpi-4-b.dtb" Tested with kernel version: SRCREV_machine = "cf5b0320cf4544d3db9ce3ddd6ddb7553a610651" SRCREV_meta="031f6c76e488a3563f35258c72ff1de3e25a512e" Signed-off-by: Christopher Clark Signed-off-by: Bruce Ashfield

xen: bump default version to 4.15-stable

2021-04-19T03:05:30+00:00

Signed-off-by: Bruce Ashfield

xen, xen-tools: add recipes for new stable Xen 4.15 release

2021-04-19T00:19:22+00:00

The recipes are introduced as the non-default version by adding an expressed PREFERRED_VERSION for 4.14 in: conf/distro/include/meta-virt-default-versions.inc to keep the Xen 4.14 recipes as default for the Hardknott release. Signed-off-by: Christopher Clark Signed-off-by: Bruce Ashfield

xen, raspi4, linux-yocto-dev: Enable Xen on Raspberry Pi 4

2020-08-11T19:58:37+00:00

Enable linux-yocto-dev as the Linux kernel for Xen on the Raspberry Pi 4, with the bcm-2xxx-rpi4 KMACHINE and KBRANCH. Set a Raspberry Pi SD card variable to increase the size of the boot partition to accommodate both the kernel and the Xen hypervisor. Signed-off-by: Christopher Clark Signed-off-by: Bruce Ashfield

xen, linux-raspberrypi4: remove linux-raspberrypi bbappends and patches

2020-08-11T19:58:37+00:00

Retiring use of the downstream vendor kernel for use with Xen. Signed-off-by: Christopher Clark Signed-off-by: Bruce Ashfield

xen, rpi4: use RPI_EXTRA_CONFIG and drop the rpi-config_git.bbappend

2020-08-11T19:58:37+00:00

The GIC that is needed by Xen can be enabled via the rpi-config recipe variable. Fixes the build after the upstream recipe changed recently. Signed-off-by: Christopher Clark Signed-off-by: Bruce Ashfield

xen: retire the Raspberry Pi sdcard class

2020-08-11T19:58:37+00:00

The sdcard class in the meta-raspberrypi layer is now extensible with support for adding files such as hypervisor binaries to the boot partition, so this layer can switch to use that and drop the custom sdcard bbclass. Uses the new RPI_SDIMG_EXTRA_DEPENDS and DEPLOYPAYLOAD variables, and: IMAGE_CLASS: sdcard_image-rpi-xen => sdcard_image-rpi IMAGE_FSTYPE: rpi-xen-sdimg => rpi-sdimg Please note that the filename suffix of the image is changed by this. Also apply _raspberrypi4-64 scoping to the Raspberry Pi settings. Signed-off-by: Christopher Clark Signed-off-by: Bruce Ashfield

xen: drop vars that duplicate hvc console from the r-pi4 config

2020-07-20T18:47:15+00:00

These settings are not needed here. Serial configuration is done in the bsp layer. Tested and working on the Raspberry Pi 4. Signed-off-by: Christopher Clark Signed-off-by: Bruce Ashfield

linux-raspberrypi: prefer kernel version 5.4

2020-07-06T20:25:56+00:00

Aligns with Yocto's current kernel version. Signed-off-by: Christopher Clark Signed-off-by: Bruce Ashfield