linux/meta-ti.git/conf/multiconfig, branch dunfell

conf: machine: j721s2-evm: Add support for J721S2 HS-FS

2023-02-14T13:42:25+00:00

Add the basic J721S2 HS-FS configuration. - Add configurations to support both HS-FS and GP keeping GP as default. - Add ti-sci-firmware overrides for HS-FS. - Remove evm conf file inclusion in hs-evm conf. - Add j721s2 hs-evm specific config to hs-evm conf. Signed-off-by: Aniket Limaye Signed-off-by: Sinthu Raja Signed-off-by: Ryan Eatmon

am62xx-evm: Add AM62x HS-FS evm configuration

2023-02-13T19:10:38+00:00

Lets add the basic AM62x HS-FS configuration - Add machine conf for AM62x HS-FS. - The wic images will boot on AM62x HS-FS devices by default. The sysfw image for GP and HS-SE will be packaged in the wic image as tiboot3-am62x-gp-evm.bin and tiboot3-am62x-hs-evm.bin respectively. - Add ti-sci-firmware overrides. Signed-off-by: Chirag Shilwant Signed-off-by: Ryan Eatmon

machine: Add AM62Q HS-SE evm configuration

2023-01-06T21:08:19+00:00

Lets add the basic AM62Q HS-SE configuration. - Add configurations. - Add ti-sci-firmware overrides. - Add u-boot overrides. - Add optee overrides. - Add ti-rtos-firmware overrides. Signed-off-by: Chirag Shilwant Signed-off-by: Ryan Eatmon

conf: machine: am64xx-evm: Switch to SR2.0 HS-FS build by default

2022-09-08T12:35:17+00:00

AM64x devices will only be available as SR2.0 HS-FS. Set this as the default type provided by the SDK. To allow SR2.0 HS-SE to continue to boot, like we did with GP, we add an extra machine to build SR2.0 HS-SE SYSFW. To use on SR2.0 HS-SE boards simply switch out the SYSFW image: $ cd /mnt/sd-card/boot $ mv tiboot3-am64x_sr2-hs-evm.bin tiboot3.bin Signed-off-by: Andrew Davis Signed-off-by: Ryan Eatmon

conf: machine: am64xx-evm: Make HS-SE the default

2022-08-26T19:33:15+00:00

The HS-SE AM64xx machine can now be run on GP devices and built without needing the TI_SECURE_DEV_PKG for the same. AM64xx will only be available in the HS-FS type going forward. Make the HS-SE the default and remove the original GP machine. Signed-off-by: Andrew Davis Signed-off-by: Ryan Eatmon

conf: machine: am64xx-hs-evm: Add extra machine to build GP SYSFW

2022-08-07T00:07:44+00:00

Use multiconfig to generate a GP SYSFW image. This allows the HS SDK to be used on GP boards by simply switching out the SYSFW image: $ cd /mnt/sd-card/boot $ mv tiboot3-am64x-gp-evm.bin tiboot3.bin Signed-off-by: Andrew Davis Signed-off-by: Ryan Eatmon

j721e-sr1_1: Add j721e sr1.1 HS support

2021-11-19T00:07:45+00:00

This patch adds support for J721e HS SR1.1 HS SR1.1 requires updated sysfw binary. Both SR1.0 and SR1.1 sysfw binary will be generated. sysfw.itb will point to SR1.1 This patch requires J7 SR 1.1 support in K3 Image gen. Signed-off-by: Yogesh Siraswar Reviewed-by: Denys Dmytriyenko

conf, recipes-bsp: support building for K3 R5F cores via multiconfig

2020-05-05T05:22:25+00:00

K3 Multicore SoC architecture defines different functional domains, each containing specific processing cores and peripherals. Early boot is normally handled by running bootloader and loading SYSFW on MCU Cortex-R5F core: https://git.ti.com/cgit/ti-u-boot/ti-u-boot/tree/board/ti/am65x/README https://git.ti.com/cgit/ti-u-boot/ti-u-boot/tree/board/ti/j721e/README This change adds support for building bootloader and SYSFW ITB image for K3 Cortex-R5F cores via multiconfig. Signed-off-by: Denys Dmytriyenko