summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* oeqa: Add 5.4 specific error messages to ignore listKhem Raj2020-10-091-0/+3
| | | | | | | | | | with 5.4 fd580000.genet has been replaced with fd580000.ethernet in the error text Fixes https://github.com/raspberrypi/linux/issues/3884 Signed-off-by: Khem Raj <raj.khem@gmail.com>
* raspberrypi-tools: Update to latest snapshot as of 20200803Khem Raj2020-10-051-4/+4
| | | | | | Use date in PV, makes is good candidate for always increasing PV Signed-off-by: Khem Raj <raj.khem@gmail.com>
* raspberrypi-firmware: Update to 20201002 snapshotKhem Raj2020-10-051-3/+3
| | | | | | | | | Brings in fixes for errors seen in kernel boot log e.g. https://github.com/raspberrypi/linux/issues/3878 Signed-off-by: Khem Raj <raj.khem@gmail.com>
* linux-raspberrypi_5.4.bb: Update to 5.4.69Khem Raj2020-10-051-2/+2
| | | | Signed-off-by: Khem Raj <raj.khem@gmail.com>
* libcamera: Define packageconfig to enable rpi pipelineMadhavan Krishnan2020-10-052-0/+4
| | | | | | | | libcamera middleware has supported many pipelines for video frames capturing. So defined the packageconfig, to enable the rpi pipeline and to capture frames using the rpi camera sensor. Signed-off-by: Madhavan Krishnan <madhavan.krishnan@linaro.org>
* linux-raspberrypi_5.4.bb: Add kernel-cache sourceMurat Kilivan2020-10-052-2/+6
| | | | | | | Fixes the following error: ERROR. input file "cfg/virtio.scc" does not exist Signed-off-by: Murat Kilivan <murat.kilivan@gmail.com>
* linux-firmware-rpidistro: Update to 20190114-1+rpt8Khem Raj2020-10-051-2/+7
| | | | | | | | | | | | | | * Update brcmfmac43455-sdio.bin to 7.45.206 * Add BCM43456 firmware - brcm/brcmfmac43456-sdio.bin 7.84.17.1 - brcm/brcmfmac43456-sdio.clm_blob - brcm/brcmfmac43456-sdio.txt * Add compatibility links for direct firmware download to work properly Fixes brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2 Signed-off-by: Khem Raj <raj.khem@gmail.com>
* Revert "linux-raspberrypi-5.4: revert 1 commit from upstream to fix ↵Martin Jansa2020-09-182-195/+0
| | | | | | | | | | | | | lttng-modules build" This reverts commit d1257fc1272c9dee76d79a74abc2bdeb7f5a7036. Now lttng-modules in oe-core were updated in: https://git.openembedded.org/openembedded-core/commit/?id=62c87d1a68c4f7c8f30c3c5330dcda9cbcbbbaa7 and the backported patch: https://git.openembedded.org/openembedded-core/diff/meta/recipes-kernel/lttng/lttng-modules/0009-fix-version-ranges-for-ext4_discard_preallocations-a.patch?id=62c87d1a68c4f7c8f30c3c5330dcda9cbcbbbaa7 now expects new writeback_queue_io API being available in LTTNG_KERNEL_RANGE(5,4,62, 5,5,0) so we need to re-enable it.
* Revert "mesa: querying dma_buf modifiers for specific formats"Luis Alfredo da Silva2020-09-172-47/+0
| | | | | | | | This reverts commit 84cb8538cd22586fc82daba38458909cedfec2db. Fixes: - https://gitlab.gnome.org/GNOME/mutter/-/issues/1421 - #711
* raspberrypi-{firmware,tools}: set downloadfilenameMartin Jansa2020-09-172-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * otherwise we end with big archives in downloads directory without clear indication from where they came * e.g. in one of my jenkins builds I've noticed: -rw-rw-r-- 1 jenkins jenkins 178M Jun 30 15:45 downloads/23548e550a757d368d3d5220373fe829b5961c42.tar.gz -rw-rw-r-- 1 jenkins jenkins 152M Sep 5 2019 downloads/7163480fff007dc98978899b556dcf06f8a462c8.tar.gz -rw-rw-r-- 1 jenkins jenkins 179M Jul 23 01:34 downloads/7e74bcb4f9706f36f752d1c3d3164628ccf2aae5.tar.gz -rw-rw-r-- 1 jenkins jenkins 178M Jun 5 12:34 downloads/7eff9f6774bb43bfd61e749a0b45ffddc98c2311.tar.gz -rw-rw-r-- 1 jenkins jenkins 177M Apr 23 14:49 downloads/84523e0b9a9e78aa69fca1f1a8d75b2bdb5155fc.tar.gz -rw-rw-r-- 1 jenkins jenkins 178M Jan 13 2020 downloads/9d6be5b07e81bdfb9c4b9a560e90fbc7477fdc6e.tar.gz -rw-rw-r-- 1 jenkins jenkins 463 Jul 1 03:58 downloads/23548e550a757d368d3d5220373fe829b5961c42.tar.gz.done -rw-rw-r-- 1 jenkins jenkins 141 Jan 16 2020 downloads/7163480fff007dc98978899b556dcf06f8a462c8.tar.gz.done -rw-rw-r-- 1 jenkins jenkins 463 Aug 1 15:40 downloads/7e74bcb4f9706f36f752d1c3d3164628ccf2aae5.tar.gz.done -rw-rw-r-- 1 jenkins jenkins 463 Jun 6 09:54 downloads/7eff9f6774bb43bfd61e749a0b45ffddc98c2311.tar.gz.done -rw-rw-r-- 1 jenkins jenkins 463 May 16 03:35 downloads/84523e0b9a9e78aa69fca1f1a8d75b2bdb5155fc.tar.gz.done -rw-rw-r-- 2 jenkins jenkins 141 Aug 7 22:10 downloads/9d6be5b07e81bdfb9c4b9a560e90fbc7477fdc6e.tar.gz.done * unfortunately using git fetcher is still problematic because of git repo size: 15G firmware 1,6G tools -rw-rw-r-- 1 jenkins jenkins 180M Sep 17 13:59 downloads/raspberrypi-firmware-a490197f0672d948860b2b807884ae65eabc4d4f.tar.gz -rw-rw-r-- 1 jenkins jenkins 463 Sep 17 14:09 downloads/raspberrypi-firmware-a490197f0672d948860b2b807884ae65eabc4d4f.tar.gz.done -rw-rw-r-- 1 jenkins jenkins 324M Sep 17 14:10 downloads/raspberrypi-tools-b0c869bc929587a7e1d20a98e2dc828a24ca396a.tar.gz -rw-rw-r-- 1 jenkins jenkins 463 Sep 17 14:10 downloads/raspberrypi-tools-b0c869bc929587a7e1d20a98e2dc828a24ca396a.tar.gz.done Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* linux-raspberrypi-5.4: revert 1 commit from upstream to fix lttng-modules buildMartin Jansa2020-09-142-0/+195
| | | | | | | * fixes: lttng-modules/2.12.2-r0/lttng-modules-2.12.2/probes/../probes/lttng-tracepoint-event-impl.h:131:6: error: conflicting types for 'trace_writeback_queue_io' Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* linux-raspberrypi: bump to Linux version 5.4.64Pierre-Jean Texier2020-09-121-2/+2
| | | | Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
* raspberrypi-firmware: update to current HEADPierre-Jean Texier2020-09-121-3/+3
| | | | Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
* docs: Correct minor spelling issuesAndrzej Bednarski2020-09-111-4/+4
| | | | | | Correct spelling issues in the 'extra-build-config.md' file. Signed-off-by: Andrzej Bednarski <andrzej.bednarski@gmail.com>
* README: Mention Yoe distro in supported distro listKhem Raj2020-09-031-1/+1
| | | | | | | | Remove angstrom as it is no longer uptodate Fixes Issue #563 Signed-off-by: Khem Raj <raj.khem@gmail.com>
* linux-raspberrypi_5.4.bb: Build ashmem and binder driversKhem Raj2020-09-032-0/+9
| | | | | | | These are android drivers, which help in running anbox on top of raspberrypi machines Signed-off-by: Khem Raj <raj.khem@gmail.com>
* rpi-gpio: add -fcommon temporarilyMartin Jansa2020-09-021-0/+4
| | | | | | * until the fix is available upstream Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* linux-raspberrypi-5.4: backport a fix for perf build with -fno-common from ↵Martin Jansa2020-09-022-0/+69
| | | | | | gcc-10 Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* libsdl2: Add userland dependency when not using vc4graphicsKhem Raj2020-08-281-0/+5
| | | | | | Needed to provide KHR/khrplatform.h header Signed-off-by: Khem Raj <raj.khem@gmail.com>
* xserver-xorg: Depend on userland when vc4graphics is disabledKhem Raj2020-08-281-0/+4
| | | | | | | | | | | | | | | | | | This helps in getting right headers, we have made a choice to let userland provide KHR/khrplatform.h when using it instead of mesa-gl which could have been another provider, xserver-xorg's glx implementation depends on virtual/libgl which in case of rpi-without-vc4 driver is provided by mesa-gl, as a result, compilation fails since no one is providing this header in this case. Fixes errors like usr/include/GL/glext.h:56:10: fatal error: KHR/khrplatform.h: No such file or directory | 56 | #include <KHR/khrplatform.h> | | ^~~~~~~~~~~~~~~~~~~ Fixes issue #391 Signed-off-by: Khem Raj <raj.khem@gmail.com>
* raspberrypi-firmware: Upgrade to 20200819Khem Raj2020-08-241-4/+3
| | | | | | Includes 5.4.59 bumps Signed-off-by: Khem Raj <raj.khem@gmail.com>
* linux-raspberrypi: Update to 5.4.59Khem Raj2020-08-241-2/+2
| | | | Signed-off-by: Khem Raj <raj.khem@gmail.com>
* linux-raspberrypi-5.4: bump SRCREV to latest to fix perf buildMartin Jansa2020-08-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Needs some fixes from newer 5.4 kernel, e.g.: 1b940bbc5c55 Linux 5.4.56 df35e878d0a5 perf bench: Share some global variables to fix build with gcc 10 702d1b287fd2 perf env: Do not return pointers to local variables 73d2d6b421df perf tests bp_account: Make global variable static to fix: LINK perf/1.0-r9/perf-1.0/perf perf/1.0-r9/recipe-sysroot-native/usr/bin/arm-oe-linux-gnueabi/../../libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/10.1.0/ld: error: perf/1.0-r9/perf-1.0/plugins/libtraceevent-dynamic-list:2:15: invalid character perf/1.0-r9/recipe-sysroot-native/usr/bin/arm-oe-linux-gnueabi/../../libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/10.1.0/ld: error: perf/1.0-r9/perf-1.0/plugins/libtraceevent-dynamic-list:2:15: syntax error, unexpected end of file, expecting ';' perf/1.0-r9/recipe-sysroot-native/usr/bin/arm-oe-linux-gnueabi/../../libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/10.1.0/ld: fatal error: unable to parse dynamic-list script file perf/1.0-r9/perf-1.0/plugins/libtraceevent-dynamic-list collect2: error: ld returned 1 exit status Makefile.perf:609: recipe for target 'perf/1.0-r9/perf-1.0/perf' failed make[2]: *** [perf/1.0-r9/perf-1.0/perf] Error 1 make[2]: *** Waiting for unfinished jobs.... perf/1.0-r9/recipe-sysroot-native/usr/bin/arm-oe-linux-gnueabi/../../libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/10.1.0/ld: error: perf/1.0-r9/perf-1.0/plugins/libtraceevent-dynamic-list:2:15: invalid character perf/1.0-r9/recipe-sysroot-native/usr/bin/arm-oe-linux-gnueabi/../../libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/10.1.0/ld: error: perf/1.0-r9/perf-1.0/plugins/libtraceevent-dynamic-list:2:15: syntax error, unexpected end of file, expecting ';' perf/1.0-r9/recipe-sysroot-native/usr/bin/arm-oe-linux-gnueabi/../../libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/10.1.0/ld: fatal error: unable to parse dynamic-list script file perf/1.0-r9/perf-1.0/plugins/libtraceevent-dynamic-list collect2: error: ld returned 1 exit status error: command 'arm-oe-linux-gnueabi-gcc' failed with exit status 1 cp: cannot stat 'perf/1.0-r9/perf-1.0/python_ext_build/lib/perf*.so': No such file or directory Makefile.perf:571: recipe for target 'perf/1.0-r9/perf-1.0/python/perf.so' failed Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* linux-raspberrypi: bump to revision 4b945d5Pierre-Jean Texier2020-08-131-1/+1
| | | | Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
* raspberrypi-firmware: update to current HEADPierre-Jean Texier2020-08-131-4/+4
| | | | Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
* rpi-default-versions: Switch defaults to 5.4Pierre-Jean Texier2020-08-131-1/+1
| | | | | | | | | | Linux Kernel 5.4 is now considered stable. See [1] to check the current apt stable kernel. [1] - https://github.com/raspberrypi/firmware/blob/stable/extra/uname_string7 Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
* sdcard_image-rpi.bbclass: Fix when RPI_SDIMG_EXTRA_DEPENDS not definedAndrei Gherzan2020-08-101-0/+2
| | | | | | | | | | | | If the variable is not defined, bitbake will fail: [...] Task 'depends' should be specified in the form 'packagename:task' [...] This is because not expanding the variable leaves an invalid entry. Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
* Generalize the naming of the bootfiles deploy directoryJeff Ithier2020-08-065-81/+85
| | | | | | | | | | The raspberry pi 4 variant has a BCM2711 chip, however it still uses the same boot files as the BCM2835 used in previous generations. This change generalizes the naming of the directory generated in the $DEPLOY_DIR to avoid the implication that the files are only meant for the BCM2835. Signed-off-by: Jeff Ithier <ithijme@gmail.com>
* docs/extra-build-config.md: document vars to add to boot partitionChristopher Clark2020-07-291-0/+25
| | | | | | FATPAYLOAD, DEPLOYPAYLOAD and RPI_SDIMG_EXTRA_DEPENDS Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com>
* sdcard_image-rpi.bbclass: enable extensible inclusion into bootChristopher Clark2020-07-291-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add DEPLOYPAYLOAD, similar to the existing FATPAYLOAD, to enable adding files to the boot partition from the image deploy directory. Files such as hypervisor binaries may not be present (and in fact unwanted) within the root filesystem, so FATPAYLOAD is not sufficient. DEPLOYPAYLOAD is implemented with support for file renaming from the source file in the image deploy directory to the filename written into the boot image. DEPLOYPAYLOAD is a space-separated list of entries for additions, each of which can optionally be colon-separated: <image deploy directory file>:<destination filename> If the colon separator is omitted, the source deploy directory filename is used as the destination filename. The support for specifying the destination filename is used for including Xen, which produces a machine-specific file in the image deploy directory, and is written to the image partition with its expected filename: xen. Files that are to be included from the image deploy directory will be produced by tasks that the do_image_rpi_sdimg[depends] must list, so enable adding entries to that via a new variable: RPI_SDIMG_EXTRA_DEPENDS. These changes enable retiring a Xen-specific Raspberry Pi SD card bbclass from meta-virtualization and have been tested on the Raspberry Pi 4. Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com>
* docs/extra-build-config.md: Document CAN_OSCILLATOR variableJakub Luzny2020-07-291-7/+13
| | | | | | | Add instructions how to use CAN_OSCILLATOR variable and declare support for the Waveshare RS485 CAN HAT. Signed-off-by: Jakub Luzny <jakub@luzny.cz>
* rpi-config: Add CAN_OSCILLATOR variable to set mcp2515 crystal frequencyJakub Luzny2020-07-291-3/+5
| | | | | | Current configuration (16MHz) is made for the PiCAN2 board that uses 16MHz crystal. This setting allows for use of Waveshare RS485 CAN HAT that has 8MHz crystal soldered (although according to Waveshare there is also a 12MHz crystal version of the board). Signed-off-by: Jakub Luzny <jakub@luzny.cz>
* u-boot: Move fw_env.config to u-boot appendFabio Berton2020-07-272-12/+11
| | | | | | | | | | | | | | The u-boot-env is provided by u-boot recipe and not by libubootenv, so right recipe to append is the u-boot. Adding the rpi-u-boot-scr in DEPENDS variable is wrong because it is forcing rpi-u-boot-scr to be a dependency, but it'll fail if I have another recipe that provides bootscript, once both recipes provide the same file. The default value of u-boot-default-script is rpi-u-boot-scr, so right way is to use u-boot-default-script and change the PREFERRED_PROVIDER_u-boot-default-script if needed. Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
* docs: Added documentation for Pican2 Duo supportcolin2020-07-231-0/+7
| | | | | | | Added documentation for ENABLE_DUAL_CAN build configuration and support for Pican2 Duo board. Signed-off-by: Colin McAllister <colinmca242@gmail.com>
* rpi-config_git: Added ENABLE_DUAL_CAN build configurationcolin2020-07-231-1/+6
| | | | | | | | | | Currently ENABLE_CAN adds mcp2525-can0 to the dtoverlay. ENABLE_DUAL_CAN was added to also add mcp2515-can1 to the dtoverlay. This will allow a user to enable dual CAN when using a hat like the PiCAN 2 Duo board. Signed-off-by: Colin McAllister <colinmca242@gmail.com>
* conf/machine/include/rpi-base.inc: Added can1 interface to bspcolin2020-07-231-0/+1
| | | | | | | | | The device tree only supports a single CAN interface. This prevents compatiblity with dual-CAN boards like the PiCAN2 Duo. The mcp2515-can1 device tree blob for overlay was added to RPI_KERNEL_DEVICETREE_OVERLAYS in order to support dual-CAN hats. Signed-off-by: Colin McAllister <colinmca242@gmail.com>
* rpi-base: add SERIAL_CONSOLES_CHECK to default to SERIAL_CONSOLESChristopher Clark2020-07-171-0/+1
| | | | | | | | As per the example in the bsp-guide, and the qemu and other machine configs. Assists when running virtualized, where serial console device can differ. Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com>
* userland: Update to 2020-06-24 top commitKhem Raj2020-07-1422-78/+144
| | | | | | Forward port patches Signed-off-by: Khem Raj <raj.khem@gmail.com>
* raspberrypi-firmware: update to current HEADPierre-Jean Texier2020-07-141-4/+4
| | | | Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
* linux-raspberrypi: bump to Linux version 5.4.51Pierre-Jean Texier2020-07-141-2/+2
| | | | | | | | | Fixes: ERROR: linux-raspberrypi-1_5.4.50+gitAUTOINC+856e83151c-r0 do_fetch: Fetcher failure: Unable to find revision 856e83151cf3f802c495585ac176bb135a08030f in branch rpi-5.4.y even from upstream ERROR: linux-raspberrypi-1_5.4.50+gitAUTOINC+856e83151c-r0 do_fetch: Fetcher failure for URL: 'git://github.com/raspberrypi/linux.git;branch=rpi-5.4.y'. Unable to fetch URL from any source. Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
* linux-raspberrypi: bump to 5.4.50 since upstream was force-pushedChristopher Clark2020-07-081-2/+2
| | | | Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com>
* libubootenv_%.bbappend: Add fw_env.configLeon Anavi2020-07-032-0/+13
| | | | | | | | | Add fw_env.config that uses at run-time /boot/uboot.env generated through the boot scripts (specifically boot.cmd.in) from recipe rpi-u-boot-scr. This configuration file is required to successfully run fw_printenv from the user space. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* rpi-u-boot-scr: Create uboot.env via boot.cmd.inLeon Anavi2020-07-031-0/+1
| | | | | | | | Modify boot.cmd.in from recipe rpi-u-boot-scr to create uboot.env in the /boot partition when using U-Boot. This change is required to successfully run fw_printenv from the user space. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* lirc: Rename bbappend to match only version 0.10.1Leon Anavi2020-06-251-0/+0
| | | | | | | Rename LIRC bbappend file to match only version 0.10.1 because the applied patch is not compatible with older LIRC versions. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* docs/extra-build-config.md: InfraredLeon Anavi2020-06-241-0/+12
| | | | | | | Add instructions how to use variable ENABLE_IR for infrared support, for example with LIRC. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* lirc_%.bbappend: Use lircd.service as in RaspbianLeon Anavi2020-06-242-0/+12
| | | | | | | | | | | Use lircd systemd service similar to the one in Raspbian. Start lircd with argument --nodaemon after lircd-setup.service. Edit device in /etc/lirc/lirc_options.conf to switch between receive and transmit modes (lircd must be restarted after such change). Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* rpi-base.inc: Include modules if IR is enabledLeon Anavi2020-06-241-0/+1
| | | | | | | | | | | | | Add kernel modules gpio-ir and gpio-ir-tx to variable MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS if ENABLE_IR is set to 1. Variable ENABLE_IR enables infrared support (for LIRC). This change affects images based on packagegroup-core-boot, including the core-image-minimal image. For other images (based on packagegroup-base) kernel modules are provide through variable MACHINE_EXTRA_RRECOMMENDS. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* rpi-config: Add ENABLE_IR variable for infraredLeon Anavi2020-06-241-0/+9
| | | | | | | | | | | | | | Users who want infrared device tree overlays gpio-ir and gpio-ir-tx to be set in config.txt can now easily do it through variable ENABLE_IR, for example in local.conf: ENABLE_IR = "1" By default the GPIO pin for gpio-ir is set to 18 and the pin for gpio-ir-tx is 17. Both pins can be easily changed by modifying variables GPIO_IR and GPIO_IR_TX (for example in local.conf). Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* lirc: Move to dynamic-layersLeon Anavi2020-06-242-0/+0
| | | | | | | | | Move lirc to dynamic-layers/meta-python/recipes-connectivity/ to avoid related issues while building rpi-basic-image. Reported-by: Alan <engineer@iotexpert.com> Suggested-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* packagegroup-rpi-test: resolve `wireless-regdb` conflictJon Magnuson2020-06-241-1/+1
| | | | | | | | Replaces `wireless-regdb` with `wireless-regdb-static` provided by poky. Fixes #639. Signed-off-by: Jon Magnuson <jon.magnuson@gmail.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-07-06 03:10:23 +0000