From a45830a39bb47a9eab27980d52966226c9504ea4 Mon Sep 17 00:00:00 2001 From: Martin Jansa Date: Sat, 13 Apr 2013 22:49:41 +0200 Subject: recipes: Unify indentation * This change is only aesthetic (unlike indentation in Python tasks). * Some recipes were using tabs. * Some were using 8 spaces. * Some were using mix or different number of spaces. * Make them consistently use 4 spaces everywhere. * Yocto styleguide advises to use tabs (but the only reason to keep tabs is the need to update a lot of recipes). Lately this advice was also merged into the styleguide on the OE wiki. * Using 4 spaces in both types of tasks is better because it's less error prone when someone is not sure if e.g. do_generate_toolchain_file() is Python or shell task and also allows to highlight every tab used in .bb, .inc, .bbappend, .bbclass as potentially bad (shouldn't be used for indenting of multiline variable assignments and cannot be used for Python tasks). * Don't indent closing quote on multiline variables we're quite inconsistent wheater it's first character on line under opening quote or under first non-whitespace character in previous line. Signed-off-by: Martin Jansa Acked-by: Koen Kooi --- .../recipes-httpd/apache2/apache2_2.4.3.bb | 126 ++++++++++----------- 1 file changed, 63 insertions(+), 63 deletions(-) (limited to 'meta-webserver/recipes-httpd/apache2/apache2_2.4.3.bb') diff --git a/meta-webserver/recipes-httpd/apache2/apache2_2.4.3.bb b/meta-webserver/recipes-httpd/apache2/apache2_2.4.3.bb index a221e1da75..a7f3586661 100644 --- a/meta-webserver/recipes-httpd/apache2/apache2_2.4.3.bb +++ b/meta-webserver/recipes-httpd/apache2/apache2_2.4.3.bb @@ -30,67 +30,67 @@ inherit autotools update-rc.d CFLAGS_append = " -DPATH_MAX=4096" CFLAGS_prepend = "-I${STAGING_INCDIR}/openssl " EXTRA_OECONF = "--enable-ssl \ - --with-ssl=${STAGING_LIBDIR}/.. \ - --with-expat=${STAGING_LIBDIR}/.. \ - --with-apr=${WORKDIR}/apr-1-config \ - --with-apr-util=${WORKDIR}/apu-1-config \ - --enable-info \ - --enable-rewrite \ - --with-dbm=sdbm \ - --with-berkeley-db=no \ - --localstatedir=/var/${PN} \ - --with-gdbm=no \ - --with-ndbm=no \ - --includedir=${includedir}/${PN} \ - --datadir=${datadir}/${PN} \ - --sysconfdir=${sysconfdir}/${PN} \ - --libexecdir=${libdir}/${PN}/modules \ - ap_cv_void_ptr_lt_long=no \ - --enable-mpms-shared \ - ac_cv_have_threadsafe_pollset=no" + --with-ssl=${STAGING_LIBDIR}/.. \ + --with-expat=${STAGING_LIBDIR}/.. \ + --with-apr=${WORKDIR}/apr-1-config \ + --with-apr-util=${WORKDIR}/apu-1-config \ + --enable-info \ + --enable-rewrite \ + --with-dbm=sdbm \ + --with-berkeley-db=no \ + --localstatedir=/var/${PN} \ + --with-gdbm=no \ + --with-ndbm=no \ + --includedir=${includedir}/${PN} \ + --datadir=${datadir}/${PN} \ + --sysconfdir=${sysconfdir}/${PN} \ + --libexecdir=${libdir}/${PN}/modules \ + ap_cv_void_ptr_lt_long=no \ + --enable-mpms-shared \ + ac_cv_have_threadsafe_pollset=no" do_configure_prepend() { - # FIXME: this hack is required to work around an issue with apr/apr-util - # Can be removed when fixed in OE-Core (also revert --with-* options above) - # see http://bugzilla.yoctoproject.org/show_bug.cgi?id=3267 - cp ${STAGING_BINDIR_CROSS}/apr-1-config ${STAGING_BINDIR_CROSS}/apu-1-config ${WORKDIR} - sed -i -e 's:location=source:location=installed:' ${WORKDIR}/apr-1-config - sed -i -e 's:location=source:location=installed:' ${WORKDIR}/apu-1-config + # FIXME: this hack is required to work around an issue with apr/apr-util + # Can be removed when fixed in OE-Core (also revert --with-* options above) + # see http://bugzilla.yoctoproject.org/show_bug.cgi?id=3267 + cp ${STAGING_BINDIR_CROSS}/apr-1-config ${STAGING_BINDIR_CROSS}/apu-1-config ${WORKDIR} + sed -i -e 's:location=source:location=installed:' ${WORKDIR}/apr-1-config + sed -i -e 's:location=source:location=installed:' ${WORKDIR}/apu-1-config } do_install_append() { - install -d ${D}/${sysconfdir}/init.d - cat ${WORKDIR}/init | \ - sed -e 's,/usr/sbin/,${sbindir}/,g' \ - -e 's,/usr/bin/,${bindir}/,g' \ - -e 's,/usr/lib,${libdir}/,g' \ - -e 's,/etc/,${sysconfdir}/,g' \ - -e 's,/usr/,${prefix}/,g' > ${D}/${sysconfdir}/init.d/${PN} - chmod 755 ${D}/${sysconfdir}/init.d/${PN} - # remove the goofy original files... - rm -rf ${D}/${sysconfdir}/${PN}/original - # Expat should be found in the staging area via DEPENDS... - rm -f ${D}/${libdir}/libexpat.* - - install -d ${D}${sysconfdir}/${PN}/conf.d - install -d ${D}${sysconfdir}/${PN}/modules.d - - # Ensure configuration file pulls in conf.d and modules.d - printf "\nIncludeOptional ${sysconfdir}/${PN}/conf.d/*.conf" >> ${D}/${sysconfdir}/${PN}/httpd.conf - printf "\nIncludeOptional ${sysconfdir}/${PN}/modules.d/*.conf\n\n" >> ${D}/${sysconfdir}/${PN}/httpd.conf + install -d ${D}/${sysconfdir}/init.d + cat ${WORKDIR}/init | \ + sed -e 's,/usr/sbin/,${sbindir}/,g' \ + -e 's,/usr/bin/,${bindir}/,g' \ + -e 's,/usr/lib,${libdir}/,g' \ + -e 's,/etc/,${sysconfdir}/,g' \ + -e 's,/usr/,${prefix}/,g' > ${D}/${sysconfdir}/init.d/${PN} + chmod 755 ${D}/${sysconfdir}/init.d/${PN} + # remove the goofy original files... + rm -rf ${D}/${sysconfdir}/${PN}/original + # Expat should be found in the staging area via DEPENDS... + rm -f ${D}/${libdir}/libexpat.* + + install -d ${D}${sysconfdir}/${PN}/conf.d + install -d ${D}${sysconfdir}/${PN}/modules.d + + # Ensure configuration file pulls in conf.d and modules.d + printf "\nIncludeOptional ${sysconfdir}/${PN}/conf.d/*.conf" >> ${D}/${sysconfdir}/${PN}/httpd.conf + printf "\nIncludeOptional ${sysconfdir}/${PN}/modules.d/*.conf\n\n" >> ${D}/${sysconfdir}/${PN}/httpd.conf } SYSROOT_PREPROCESS_FUNCS += "apache_sysroot_preprocess" apache_sysroot_preprocess () { - install -d ${SYSROOT_DESTDIR}${bindir_crossscripts}/ - install -m 755 ${D}${bindir}/apxs ${SYSROOT_DESTDIR}${bindir_crossscripts}/ - sed -i 's!my $installbuilddir = .*!my $installbuilddir = "${STAGING_DIR_HOST}/${datadir}/${PN}/build";!' ${SYSROOT_DESTDIR}${bindir_crossscripts}/apxs - sed -i 's!my $libtool = .*!my $libtool = "${STAGING_BINDIR_CROSS}/${TARGET_PREFIX}libtool";!' ${SYSROOT_DESTDIR}${bindir_crossscripts}/apxs - - sed -i 's!^APR_CONFIG = .*!APR_CONFIG = ${STAGING_BINDIR_CROSS}/apr-1-config!' ${SYSROOT_DESTDIR}${datadir}/${PN}/build/config_vars.mk - sed -i 's!^APU_CONFIG = .*!APU_CONFIG = ${STAGING_BINDIR_CROSS}/apu-1-config!' ${SYSROOT_DESTDIR}${datadir}/${PN}/build/config_vars.mk - sed -i 's!^includedir = .*!includedir = ${STAGING_INCDIR}/apache2!' ${SYSROOT_DESTDIR}${datadir}/${PN}/build/config_vars.mk + install -d ${SYSROOT_DESTDIR}${bindir_crossscripts}/ + install -m 755 ${D}${bindir}/apxs ${SYSROOT_DESTDIR}${bindir_crossscripts}/ + sed -i 's!my $installbuilddir = .*!my $installbuilddir = "${STAGING_DIR_HOST}/${datadir}/${PN}/build";!' ${SYSROOT_DESTDIR}${bindir_crossscripts}/apxs + sed -i 's!my $libtool = .*!my $libtool = "${STAGING_BINDIR_CROSS}/${TARGET_PREFIX}libtool";!' ${SYSROOT_DESTDIR}${bindir_crossscripts}/apxs + + sed -i 's!^APR_CONFIG = .*!APR_CONFIG = ${STAGING_BINDIR_CROSS}/apr-1-config!' ${SYSROOT_DESTDIR}${datadir}/${PN}/build/config_vars.mk + sed -i 's!^APU_CONFIG = .*!APU_CONFIG = ${STAGING_BINDIR_CROSS}/apu-1-config!' ${SYSROOT_DESTDIR}${datadir}/${PN}/build/config_vars.mk + sed -i 's!^includedir = .*!includedir = ${STAGING_INCDIR}/apache2!' ${SYSROOT_DESTDIR}${datadir}/${PN}/build/config_vars.mk } # @@ -103,21 +103,21 @@ LEAD_SONAME = "libapr-1.so.0" PACKAGES = "${PN}-doc ${PN}-dev ${PN}-dbg ${PN}" CONFFILES_${PN} = "${sysconfdir}/${PN}/httpd.conf \ - ${sysconfdir}/${PN}/magic \ - ${sysconfdir}/${PN}/mime.types \ - ${sysconfdir}/init.d/${PN} " + ${sysconfdir}/${PN}/magic \ + ${sysconfdir}/${PN}/mime.types \ + ${sysconfdir}/init.d/${PN} " # we override here rather than append so that .so links are # included in the runtime package rather than here (-dev) # and to get build, icons, error into the -dev package FILES_${PN}-dev = "${datadir}/${PN}/build \ - ${datadir}/${PN}/icons \ - ${datadir}/${PN}/error \ - ${bindir}/apr-config ${bindir}/apu-config \ - ${libdir}/apr*.exp \ - ${includedir}/${PN} \ - ${libdir}/*.la \ - ${libdir}/*.a" + ${datadir}/${PN}/icons \ + ${datadir}/${PN}/error \ + ${bindir}/apr-config ${bindir}/apu-config \ + ${libdir}/apr*.exp \ + ${includedir}/${PN} \ + ${libdir}/*.la \ + ${libdir}/*.a" # manual to manual FILES_${PN}-doc += " ${datadir}/${PN}/manual" @@ -126,8 +126,8 @@ FILES_${PN}-doc += " ${datadir}/${PN}/manual" # override this too - here is the default, less datadir # FILES_${PN} = "${bindir} ${sbindir} ${libexecdir} ${libdir}/lib*.so.* ${sysconfdir} \ - ${sharedstatedir} ${localstatedir} /bin /sbin /lib/*.so* \ - ${libdir}/${PN}" + ${sharedstatedir} ${localstatedir} /bin /sbin /lib/*.so* \ + ${libdir}/${PN}" # we want htdocs and cgi-bin to go with the binary FILES_${PN} += "${datadir}/${PN}/htdocs ${datadir}/${PN}/cgi-bin" -- cgit v1.2.3-54-g00ecf